*** DVD-RW & CDRW Device drivers "missing" when booting from Cd's

Hi
I am using the MSI 875P Neo FIS2R Mobo and I have been having a problem with booting from CD's.
When I use the WinXP CD and various other bootable CD's, I don't have any problems at all, but when I insert a Maxtor "PowerMAX" or MaxBlast bootable CD, I get the following messages:
** ERROR: No CD-ROM DRive found, please check power cables
** ERROR: IDE CD-ROM Device Driver NOT installed
As you can see from my signature, my drives are the LG CDRW and LG DVDRW drives.
When I insert the same CD's into another computer with an ELITE AMD mobo, my drives and device drivers are found and they work just fine.
I have re-installed both computers and then, installed all of my drivers and programs and then updated from Windows Update, but when I try and use the Maxtor bootable CD's in my 875P, I am told that no drives or device drivers were found but if I swap them to the ELITE computer and boot from the CD's, my LG CDRW & DVDRW drives and device drivers are found and the CD's work perfectly.
Can anyone help resolve this problem on my MSI 875P Neo FIS2R?
Regards
Brave01Heart

Hi Maesus
Thanks for the response and I'll certainly give your suggestion a try.
I'm sure it's set to "Native" but what difference does it make if it's set to "Legacy"?
Regards
Brave01Heart

Similar Messages

[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)

I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old?

2 base system device drivers missing for dv9731ca on windows 7 os

2 base system device drivers missing need help installing cant find them

Hi:
You need this driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&dlc=en&lc=en&...

Ethernet seems to work when booted from Leopard DVD--Not anytime else

Ok. Here is the deal. iMac G5 connected via ethernet cable to router. It will not connect. The airport works fine. I unplug the same cable and plug into macbook pro--it works just fine. Plug it back into iMac.
In network utilities when booted from the disk--I can ping away just fine. So--in network preferences when I boot it up again I attempt to put the IP address, subnet, router yada yada yada in manually and after about twenty five seconds of the program chewing on it--it crashes. Over and over again. Airport works just fine. PowerBook and Mac Pro connected to same network---all check out.
Any thoughts?

Hi,
The internet port is meant for modem, and ports 1,2,3,4 are meant for computers.
After making proper connections reset router for 1 minute, and rebbot it.
Now run easy connect program for configuring router.

Hard Drive not recognized when booting from XP CD on docking station

The hard drive on my X60 failed to the point where I couldn't recover and reinstall the image. I have backups of all my data and a docking station so I didn't sweat it. Bought a new drive and installed it and this is when the trouble began.
I created an XP CD with SP2 slipstreamed in to make sure I have the latest drivers. I boot from XP CD and everything works until I try to install Windows. According to the installation CD there is no drive installed!
I reinstalled the drive to make sure and this time I booted off of Ubuntu Linux which installed flawlessly. That leads me to believe that there is a driver problem with Windows.
I need help! I would like to install Windows on the machine but nothing I've tried works.

edgardo wrote:
According to the installation CD there is no drive installed!
Standard Microsoft XP SP2 does not come with any SATA device drivers.
You have two options:
Go into the T60 BIOS and switch the SATA controller mode away from AHCI to "IDE" mode (or pehaps its "legacy" or "compatibility" mode - I forget what specific term is used in a ThinkPad BIOS).
Find the SATA device driver for XP (it's probably in the Intel Chipset driver download) on the Lenovo X60 support web site, download it and install it using the additional driver installation option which is offered right at the start of an XP install.
If you chose option 1, remember to switch the SATA controller back to AHCI mode in the BIOS after you have installed the SATA device driver.
Cheers,
Bill
Message Edited by billbolton on 03-09-2008 02:11 PM
I don't work for Lenovo

SATA DVD RW should I be able to boot from this?

I am having problems installing WinXP. I have a SATA DVD Rom, should I be able to boot from the WinXP CD to load Windows from this or do I need to use an IDE Rom?
Phil...
I'll get there in the end

Oh, sorry that I didn't write a full name. It's MSI K8T Neo-FSR.
I'm not sure if it's too old, because the drive works with no problems in Windows and even during booting up I can see a text from RAID agent (or something like this, I'm not sure if it's a proper name) that my device is installed. The only thing, which doesn't work is fact that I can't choose it in Boot Sequence :(
Does anyone have some ideas?
I received an answer from MSI Online Customer Service. They suggested me to flash my bios with a version 2.34. Well, it seems to me a little bit suspicious as it is only available via ftp (on a website I haven't found this version). What's more, I am just afraid of destroying my motherboard. Flashing bios is always quite dangerous task. As I believe, you would recommend me doing this with The MSI HQ Forum Flasher?

G5 Grey screen (Kernel Panic) when booting from CD

I know there are a lot of posts with people experiencing issues with the grey screen during boot. Most resolutions point to hardware but all state, including Apple's walk through, to boot from CD and run a validation on the hard drive.
My issue is completely different. I get the grey screen of death when booting from a CD/DVD only. I can boot into the OS just fine from the hard drive. But if I try to install another OS, or just boot from the CD/DVD, I get the grey screen.
What I've done to troubleshoot:
Reduced RAM to original sticks
Removed hard drive
Replaced DVD drive
Tried multiple versions of OS discs (10.2, 10.3, 10.4 and 10.4 server)
Reset the PRAM (Both via keyboard and Open Firmware)
Replaced the video card
Replaced the logic board
Replaced the Processor
Quite litterally the only thing original in this system is the power supply and the memory. However, I only get it when I'm booting from CD so the memory should not be the issue. I've even used a seperate power supply for the DVD drive to see if it was causing an issue.
Any suggestions? I'm looking at possibly replacing the power supply but I'm afraid it's going to give me the same issue.

Thats the thing, I've tried 10.2, 10.3, 10.4, and 10.4 server. (CD and DVD) All give me the grey screen. Well 10.2 and 10.3 give me a dark grey square in the middle where the apple should be but then the fans ramp up like it does when you get the grey screen of death.
I've also used two different drives.
It reads the disks fine with no issues. If I boot to the hard drive I can use the system like nothing is wrong. But if I want to boot from CD for any reason I cannot.
If I follow the logic it seems it is something to do with the CD/DVD drive. This is because it works fine when booted to hard drive. If it was the memory or PSU then I'd be getting the problem all of the time and not just when booting from CD/DVD.

Why won't DiskWarrior boot up my mac? (no entry sign when booting from DW)

I get a "no entry" sign (black circle with a diagonal line through it" when I try to boot from the DW dvd. I'm not sure which type of macbook I have but it was bought in January 2007, and before my file system got corrupted my OS was 10.4.11 . I can boot perfectly find from a Data Rescue 3 DVD (and have already used this to backup all my files) and from the OS X install DVD, so why am I getting this error when booting from DiskWarrior? The apple sign appears and the cog spins for a minute or two and then the no entry sign comes up and stays there...
It's DiskWarrior 4.2.

is this a disc which was mailed to you or one you burned? sometimes their downloaded "upgrades" are just for install only, you have to contact them for the disc...
if this is suppose to be a genuine boot disc, it could just be a bad burn. the boot DVDs should be apple partition map.

No Harddrive when booting from OS 9.2.1 CD on G4 MDD 1.25 Dual

I also have a G4, 1.25 GHz dual processor running OS X 10.2.8 and 9.2.1 updated to 9.2.2, 1 GB RAM.
When booting from OS 9.2.1 CD (came with the computer) I do not see any harddrive. Need to reinstall OS 9 for some classic applications.
Drivesetup can not find any disc to format.
Any idea?
PowerBook G3/400 Mac OS X (10.3.9)

Hi, kai -
Welcome to Apple's Discussions.
An OS 9-bootable G4 MDD model requires OS 9.2.2 as the minimum OS. Apparently some models of G4's which require OS 9.2.2 can in fact boot to some OS 9.2.1 Install CDs, but that is all - they can not run the installer or do much else.
Your G4 MDD model originally shipped with a combo set of install disks; none shipped originally with a separate OS 9 Install CD (the last G4's to do so were QuickSilver models). You can ise that set of disks to re-install OS 9 (Classic).
One or more of these Apple KBase articles may help you do that -
Article #106294 - Mac OS X: How to reinstall Mac OS 9
Article #107383 - Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
Article #42929 - Using Restore Discs with Mac OS X 10.2 or later
There can also be an issue with what bus a hard drive is on. As I understand it, in order see a hard drive on the ATA/100 bus on a G4 MDD model when booted to an OS 9 Install CD, the System Folder on the CD must contain the file Mac OS ROM in version 9.5.1 or later. No OS 9.2.1 Install CD (or earlier version) contains that file version.

Error Message when booting from System CD's

Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuck

Not only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck.

How to use Photoshop CS6 when booted from a different partition?

I have CS6 installed. I recently created a second partition on my SSD for development in OS X 10.10. When booted from that drive, I get an error that CS6 was not properly installed and to re-install it.
This is a smaller partition, with just the system and a few development apps, and I'd prefer to continue to run my larger apps from the original, larger partition.
Of course, every app I have tried does this with no issues except CS6. I usually need to re-enter app serials, but they work.
What files need to be copied from one partition to the other to let the app boot up?

They work fine. I first tried with a clone of my main drive doing an update in place on it.
i guess I will need to boot into 10.9 to use them.
I will mostly use stand-in apps like Pixelmator.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

No external disk encryption available when booted from Lion installer

Problem: When booting my Mac Mini from a Lion Installer USB thumb drive, Neither Disk Utility nor diskutil from the command line seems able to actually encrypt an external drive. They both seem to be able to convert the drives to coreStorage, just not actually encrypt the drives.
Background: I was able to successfully preform 3 encryptions from the Lion system on my 17inch MacBook Pro before failing as described above:
1) I encrypted my main HD in my laptop (using System Preferences > Security & Privacy)
2) I encrypted my Time Machine backup (Using Time Machine system prefs)
3) I converted an external 2TB USB drive filled with data (I had a freshly mirrored copy of all this data as backup) using diskutil cs convert -passphrase from the command line
each of the successful encryptions took about 24hours/Terabyte
Here is where I tried and failed, step by step:
### Failure 1
I created a bootable backup of Mac OS X Lion on a USB thumb drive. I booted my Mac Mini with it and attached a 2TB external USB drive that I wanted to encrypt. It was a blank drive so I launched Disk Utility from the recovery/installer screen and created 1 partion, GUID, Mac OS Extended (Journaled)
Then I went to the Erase tab and chose Mac OS Extended (Journaled, Encrypted), provided a passphrase and erased. It took just a couple seconds and said it was done.
I moved the 2TB external to my laptop running Lion, it asked for the passphrase and when provided the drive mounted just fine but when examined with "diskutil coreStorage list" I see a couple problems (besides the fact I don't believe it encrypted a 2TB drive in 15 seconds)
Conversion Status is NoConversion and it's not listed as revertible - my successful encryptions are listed as "Conversion Status: Complete and Revertible: Yes (unlock and decryption required)"
    +-> Logical Volume Family 83A8BED0-EA17-433B-B494-B71D9B16142C
        Sequence:               2
        Encryption Status:      Unlocked
        Encryption Type:        AES-XTS
        Encryption Context:     Present
       Conversion Status:      NoConversion
        Has Encrypted Extents: Yes
        Conversion Direction:   -none-
        |
        +-> Logical Volume FD9868AA-C880-475A-8AFE-98DFCED1A0B4
            Disk:               disk8
            Status:             Online
            Sequence:           2
            Size (Total):       1999903956992 B (2.0 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            2011-07-24
            Volume Name:        2011-07-24
            Content Hint:       Apple_HFS
### Failure 2
Still booted from thumb drive installer, I attached a 1TB Firewire drive with files on it (it is a mirrored copy of an original drive) and l launched Terminal and attempted to use "diskutil cs convert /Volumes/mydrivec -passphrase" to encrypt the drive without erasing it first. Again it seemed to work, it went thru the corestorage step and when mounted on my laptop running Lion I'm asked for the passphrase and it mounts and the files are all fine but again it finished in seconds instead of the 24 hours I was expecting, and diskutil cs list shows a conversion status of "converting" but no progress is being shown in Size (Converted) or Conversion Direction and Revertible says no decryption required
> Logical Volume Family A54F382A-54A0-4295-B3A8-1CA0E92341C4
|       ----------------------------------------------------------
|       Sequence:               4
|       Encryption Status:      Unlocked
|       Encryption Type:        AES-XTS
|       Encryption Context:     Present
|       Conversion Status:      Converting
|       Has Encrypted Extents: Yes
|       Conversion Direction:   -none-
|       |
|       +-> Logical Volume C6AFB536-3C5F-48D0-A590-BD6883A4D763
|           ---------------------------------------------------
|           Disk:               disk7
|           Status:             Online
|           Sequence:           4
|           Size (Total):       999542140928 B (999.5 GB)
|           Size (Converted):   -none-
|           Revertible:         Yes (no decryption required)
Thoughts on why I'm not getting actual encryption when booted from Lion installer thumb drive? I don't want to upgrade the Mini to Lion (yet), I just want to boot it up from Lion installer and use it as an encryption station for a week.

Problem: When booting my Mac Mini from a Lion Installer USB thumb drive, Neither Disk Utility nor diskutil from the command line seems able to actually encrypt an external drive. They both seem to be able to convert the drives to coreStorage, just not actually encrypt the drives.
Background: I was able to successfully preform 3 encryptions from the Lion system on my 17inch MacBook Pro before failing as described above:
1) I encrypted my main HD in my laptop (using System Preferences > Security & Privacy)
2) I encrypted my Time Machine backup (Using Time Machine system prefs)
3) I converted an external 2TB USB drive filled with data (I had a freshly mirrored copy of all this data as backup) using diskutil cs convert -passphrase from the command line
each of the successful encryptions took about 24hours/Terabyte
Here is where I tried and failed, step by step:
### Failure 1
I created a bootable backup of Mac OS X Lion on a USB thumb drive. I booted my Mac Mini with it and attached a 2TB external USB drive that I wanted to encrypt. It was a blank drive so I launched Disk Utility from the recovery/installer screen and created 1 partion, GUID, Mac OS Extended (Journaled)
Then I went to the Erase tab and chose Mac OS Extended (Journaled, Encrypted), provided a passphrase and erased. It took just a couple seconds and said it was done.
I moved the 2TB external to my laptop running Lion, it asked for the passphrase and when provided the drive mounted just fine but when examined with "diskutil coreStorage list" I see a couple problems (besides the fact I don't believe it encrypted a 2TB drive in 15 seconds)
Conversion Status is NoConversion and it's not listed as revertible - my successful encryptions are listed as "Conversion Status: Complete and Revertible: Yes (unlock and decryption required)"
    +-> Logical Volume Family 83A8BED0-EA17-433B-B494-B71D9B16142C
        Sequence:               2
        Encryption Status:      Unlocked
        Encryption Type:        AES-XTS
        Encryption Context:     Present
       Conversion Status:      NoConversion
        Has Encrypted Extents: Yes
        Conversion Direction:   -none-
        |
        +-> Logical Volume FD9868AA-C880-475A-8AFE-98DFCED1A0B4
            Disk:               disk8
            Status:             Online
            Sequence:           2
            Size (Total):       1999903956992 B (2.0 TB)
            Size (Converted):   -none-
            Revertible:         No
            LV Name:            2011-07-24
            Volume Name:        2011-07-24
            Content Hint:       Apple_HFS
### Failure 2
Still booted from thumb drive installer, I attached a 1TB Firewire drive with files on it (it is a mirrored copy of an original drive) and l launched Terminal and attempted to use "diskutil cs convert /Volumes/mydrivec -passphrase" to encrypt the drive without erasing it first. Again it seemed to work, it went thru the corestorage step and when mounted on my laptop running Lion I'm asked for the passphrase and it mounts and the files are all fine but again it finished in seconds instead of the 24 hours I was expecting, and diskutil cs list shows a conversion status of "converting" but no progress is being shown in Size (Converted) or Conversion Direction and Revertible says no decryption required
> Logical Volume Family A54F382A-54A0-4295-B3A8-1CA0E92341C4
|       ----------------------------------------------------------
|       Sequence:               4
|       Encryption Status:      Unlocked
|       Encryption Type:        AES-XTS
|       Encryption Context:     Present
|       Conversion Status:      Converting
|       Has Encrypted Extents: Yes
|       Conversion Direction:   -none-
|       |
|       +-> Logical Volume C6AFB536-3C5F-48D0-A590-BD6883A4D763
|           ---------------------------------------------------
|           Disk:               disk7
|           Status:             Online
|           Sequence:           4
|           Size (Total):       999542140928 B (999.5 GB)
|           Size (Converted):   -none-
|           Revertible:         Yes (no decryption required)
Thoughts on why I'm not getting actual encryption when booted from Lion installer thumb drive? I don't want to upgrade the Mini to Lion (yet), I just want to boot it up from Lion installer and use it as an encryption station for a week.

X200 with OCZ ssd blue screens when booting from docking station

The x200 blue screens when booting from the docking station. If I take the laptop out of the docking station to boot and then dock once booted the laptop is fine.
The issue started happening when you I upgraded the laptop form xp to windows 7 and installed an OCZ vertex 2 solid state drive.
I have tried updating the firmware on the ssd using this utility
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806
The program showed that my ssd was running firmware version 1.29 and did not need to be updated.
I have also tried updating the x200 to the latest BIOS. Nothing seems to work.
Any ideas or suggestions are greatly appreciated.
Solved!
Go to Solution.

you need to modify a registry value before going from AHCI to IDE. (or viceversa).
http://www.ocztechnologyforum.com/forum/showthread.php?69682-Change-from-IDE-to-AHCI-after-Installat...

Noise when booting from external firewire drive

When booting from a Maxtor drive with OS10.3.9 to the iMac G5 with Tiger the fan makes a lot of noise. Why?
When I reboot into Tiger the fan is normal.
Reasons?
Thanks

The fans are controlled by code in the OS you boot from. It sounds like the OS you have on your external Maxtor is older then your iMac G5. As a results it may not have the needed fan control code. When that occurs, the Firmware in the iMac, sets the fans to a high speed to ensure your computer will not overheat.
Tom N.

*** DVD-RW & CDRW Device drivers "missing" when booting from Cd's

Similar Messages

Maybe you are looking for