DVD's have no sound during Movies

It seems like a popular problem with the new iDVD and for some reason I can't seem to find a solution. Everytime I burn a DVD, the movie sound does not want to work. It works fine during the preview and in quicktime and such, but after the burn, no matter the DVD player or format of the movie, the sound just isnt there. Can anyone help?

The video was made on FCP over a year ago and was exported onto a DVD then and I've never had any problems before exporting DVD's and having the sound work.
ah... but THIS is iDVD '08
You mentioned 'Compressor' - why did you put the FCP movie through Compressor? iDVD won't work with multiplexed mpg-2
Take a look at: iDVD 7.0 Help (iLife '08) - Video and image formats that work with iDVD at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6655.html
Notice: The following video and image formats are not supported in iDVD: ... You can’t add MPEG-1 or MPEG-2 files to an iDVD project because they don’t contain standard video tracks

Similar Messages

  • Sound stops during movie, restart to fix

    i've searched around and the closest reference was : http://discussions.apple.com/thread.jspa?messageID=844795&#844795
    However, I haven't seen a fix yet so I will ask the question myself.
    When watching some movies (2hrs+ in length) my 5g ipod will suddenly freeze a couple minutes in and then resume without any sound. I have to exit the movie and restart it. The movie then resumes from where I left off and the sound is fine for a few more minutes.
    This does not happen on all movies. Any idea?

    If you've updated recently to the latest software (1.1), and you've used Videora to rip your DVDs, then that's the problem. It's well documented on this forum, and even the Videora home page has a note about it.
    The only solution to this is to revert to software version 1.0 which should be on the installation disk.

  • No Sound During DVD Playback

    I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
    - Confirmed all system mute settings are off (e.g., not muted)
    - Confirmed DVD works on other devices
    - DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
    - Picture is fine...just no audio
    - Running XP
    - All other system sounds work
    Help!

    Try installing AC3 Filter:
    http://www.free-codecs.com/download/ac3_filter.htm
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

    I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
    Daniel
    Codecs audio
    Type
    Nom
    Format
    Binaire
    Version
    ACM
    Codec Microsoft IMA ADPCM
    0011
    ACM
    CODEC A-Law et u-Law Microsoft CCITT G.711
    0007
    ACM
    Codec audio Microsoft GSM 6.10
    0031
    ACM
    Codec Microsoft ADPCM
    0002
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    ACM
    Convertisseur PCM Microsoft
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.1.7601.17514
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.1.7601.17514
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.1.7600.16385
    Codecs vidéo
    Type
    Nom
    Format
    Binaire
    Version
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.1.7601.17514
    ICM
    Microsoft Vidéo 1
    MSVC
    msvidc32.dll
    6.1.7601.17514
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.1.7601.17514
    ICM
    Codec Intel IYUV
    IYUV
    iyuv_32.dll
    6.1.7601.17514
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.1.7601.17514
    ICM
    Codec Cinepak de Radius
    cvid
    iccvid.dll
    1.10.0.13
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.1.7600.16385
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.1.7601.17514
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
    wmvdecod.dll
    6.1.7601.18221
    DMO
    Mpeg43 Decoder DMO
    mp43, MP43
    mp43decd.dll
    6.1.7600.16385
    DMO
    Mpeg4 Decoder DMO
    MPG4, mpg4, mp42, MP42
    mpg4decd.dll
    6.1.7600.16385
    De : sarika02 
    Envoyé : 17 juin 2014 19:26
    À : Daniel Cloutier
    Objet :  On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
    created by sarika02 <https://forums.adobe.com/people/sarika02>  in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

  • My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

  • I have a MX 860 Printer and it makes a squeaking sound during warm-up but not during printing.

    This printer is making loud squeaking sounds during warm-up, it prints ok but I don't know where it is coming from or how to go about fixing it.Any help would be appreciated.

    Hi Den,
    Please open the cover to the printer and look for any foriegn objects.  Also, please look in the paper feed opening for anything that may be out of place.
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    I have a PowerBook G4 17" and need Apple discs to set it up again. Mine lost during move. Screen seems damaged, has vertical lines.  Can anyone help. I can call as I have unlimited calling on my iPhone 6  anywhere in North America.

    king,
    If your Powerbook's serial number (do not post it here) starts with "W8" then the vertical lines are mostly likely due to a defect in the display itself. W8 is a factory code and, during the iMac G5 and PowerBook G4 timespan, that factory shipped thousands of units with the same defect. It cannot be fixed via software.
    As all PowerBooks are now classed as "obsolete," an Apple Store will not work on it. They will look at it ands tell you it has vertical lines and that they cannot fix it. This Apple article shows Apple devices they curently considered obsolete:
    Vintage and obsolete products - Apple Support
    It is possible that some Apple Authorized Service Providers (AASP) will still work on older computes but they cannot get neededparts from Apple. As this issue was so pervassive, it wil be hard for you or an AASP to find a used/pulled display that is not effected with the "W8 Curse."
    Although I love the old PowerBooks, I would not even spent the money for disks, much less the US$150-400 it would cost to replace the display, even should one be available.
    If you give us a rough idea of where you are in the world, we can suggest repair shops specializing in fixing older Mac notebooks, but be aware those resources may be rather scare outside North America.

  • HT1657 I have no sound while watching movie from I Tunes?

    I have no sound while watching movie from I Tunes?

    See also:
    * https://support.mozilla.com/kb/No+sound+in+Firefox
    * https://support.mozilla.com/kb/Video+or+audio+does+not+play
    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • Movies I record with the iphone have no sound

    I've recorded a few movies with the iphone where the sound was fine, and now suddenly the last few have no sound when I play them back. I know I'm not covering the microphone...they are next to the charging dock on the bottom...
    any ideas??

    Connect to iTunes.
    Do a sync as each sync makes a back up.
    When done click restore this time instead of sync (right there in iTunes)
    It will reinstall the OS.
    You can restore from back up to see if just the fresh OS fixed it and thus your backup will be put back too with all your data.
    If doesn't fix, repeat but when it asks ifyou want to use backup, say no this time and restore it as a new phone.
    If that still fails, then take it to Apple.
    Restoring is what they suggest first and they will try in the store as well if you didn't.

  • Movies have no sound

    All the movies i sync to my iPod don't have any sound!

    Try using Videora or MPEG Streamclip to convert the videos; more information is available in this article.
    (23436)

  • I have no sound at all on my Mac Pro. I was watching movies online and also listening to itunes n the weekend, now no sound at all??

    e in the weekend, at times with my earphones on. Now for some reason I have no sound at all not just while watching movies but also in itunes.

    Best post this in the MacPro forum.
    Have fun.
    x

  • I have a 6 minute movie, I have it set to loop will it fill up the whole dvd when I burn it?

    I have a 6 minute movie, I have it set to loop will it fill up the whole dvd when I burn it?

    Yes, but why does this matter?

  • TS3623 I have no sound on my rented movie. what gives?

    I have no sound on my rented movie. what gives?

    No sound through TV over HDMI? Try setting Dolby Digital to Auto or Off in Settings.
    AC

  • No sound on movies once burned to disk

    I have no idea if this is the correct place to ask my questions, but hopefully someone can help me. I made an iDVD project consisting of three movies imported from my camera and a slide show. I can view all three movies perfectly when I open from the desktop version of the project. I burned the project onto a DVD, and there is no sound when I play the movies. There is music during the slideshow and music at the opening, but no luck with each independent movie. PLEASE HELP- I have so many small movies of my kids and would love to make more DVDs out of them! Thanks so much.

    Welcome to the forums, lylas.
    From your description, the +three movies imported from my camera"+ have the audio problem. It's possible they're in a format that needs to be converted.
    .avi movies can cause this kind of problem (yourfilename.avi). Possible workaround - If you open the camera video in iMovie, does it play correctly? And, if you Export from iMovie to iDVD, does that video play correctly?
    There is software to change audio/video formats if necessary (Quicktime Pro, MPEG Streamclip, Roxio Toast, etc.). Tell us more about your video.
    John

Maybe you are looking for

  • Moving a US purchased AppleTV to Europe

    Will my US bought Apple TV work in Europe on 240V ? And typically the TVs there are supporting NTSC not PAL like in US. Any idea what to do apart from selling it in US?

  • ITunes crashed won't launch

    After using Norton Utilities 8.0 my iTunes crashed and won't launch. Already ran Apple disk utility and repaired disk permissions. The following was in the iTunes.crash.log: Command: iTunes Path: /Applications/iTunes.app/Contents/MacOS/iTunes Version

  • How to hide a keyfigure in query(In wad)

    Hi everyone Iam new to WAD. I have an contains chart and table . In that chart graph, x is values of 3 figures.                           y axis is values of regarding x axis. y axis contains the values from 0 t0 600 x axis contains 3 keyfigures no o

  • Interaction between components residing in seperate applications..

    Hello All, Wanted to know whether components residing within seperate WD applications? If yes, any guidelines as to how? Ive seen the sample tutorials but there the components reside under single application. Awaiting Reply. Thanks & Warm Regards, Ri

  • How can I change the view size to make it my default?

    the view size is way too small with pages that I open on Firefox. I want to change the size and I want to make it my default so I don't have to click on zoom in everytime I open Firefox. Where can I change this? I have Windows Vista.