DVD's Not Playing....

I have the latest software of Final Cut Pro , Motion , Soundtrack , and DVD Studio Pro. Recently when i have been burning DVD's in DVD Studio Pro the DVD's have not been playing in my home DVD player. The DVD's though play on my Apple G5 flawlessly. I am using the Apple DVD's and tried all of the different laser settings on DVD Studio Pro , Blue & Red. What do i need to fix in the DVD Studio Pro application to get my DVD's to play on everday DVD players? I know its prob. just a minor thing.

all of the DVDs i use are the Apple brand DVDs. When i am finished with a project in Final Cut Pro i export it using Compressor and choose MPEG DVD option. All of my footage is filmed with a Panasonic AG-DVX100, DV Film. I dont mess around with the 24fps featture because that gets to confusing and havent found much sucess for that.

Similar Messages

What can I do, if a DVD will not play?

What can I do, if a DVD will not play?

You don't want to change the player Region Code. If I remember correctly you can only change the Region Code three times and it sticks to the last Region Code you selected.
Does the DVD play in another player?

DVD will not play on standalone.

Ok so here's the deal. I imported my DVD using MpegStreamClip - this is a DVD previously built by me, but back in the days I used Pinnacle... which wasn't so long ago. I imported this DVD as .m2v and AIFF audio, and built a project in DVDSP 4. The simulations run fine and I have had no problems up until the point that I burn the DVD, and the DVD will not play on a standalone player.
When outputting from DVDSP, do I need to Burn/Build/Format/Build&Format? Is it one of my settings that I need to change?
I know this question has been asked before, but there seems to be no solution out there yet.

I have an HVDVD_TS folder, but not the usual VIDEO_TS folder - could this be evidence of my problem?
It's the smoking gun.
Keep your m2v files.
Take the aiff files and encode them in Compressor ac3/Dolby 2.
Create a new project in DVD SP. Make certain the SD button is selected.
Import ac3 and m2v assets and you are good to go.

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

Hello there, tomazdes.
The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Particularly:
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I HAVE AN IMAC AND WHY IS IMOVE DVD'S NOT PLAYING ON ALL DVDS?

I ENJOY MY MAC
Only problem im having is i make shoot weddings,church events,talk shows ect,iv bent ggetting negative feed back from people saying there dvd s not playing in there dvd player but it plays on there pc.I all so sent dvds to a local tv station and they had no problem in the pass but now it's like every dvd i sent they have problems with it .They inform me that they have to scan it and then it would play with no problem.one person told me they had nothering no show on theres and another one says somethings not right in your Mac reset it are something,love my Mac but im really not happy with this problem.HELP ME NARROW IT DOWN. PLEASE.
Should i sent it back to the store and let then reset it are and tell them whats happening.?

What operating system does your iMac have? (please always post your operating system to prevent confustion).
If it's pre-Lion you will have to set Mail up manually:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

DVD will not play on iMac in Bootcamp using Windows 8

I am trying to play a DVD in Windows 8 being run with Bootcamp on my iMac (OSX 10.9). The DVD will not autoplay in Windows. You can see the DVD in the folder view, but can only access the Video_TS and Audio_TS files, not the actual playable DVD. Have tried playing it through the folder view as well as Windows Media also to no avail. Booted down Windows and into Mac OS, and the DVD autoplays just fine. How can I get it to play in Windows mode, as the software we are running for a certain program needs to be accessed constantly before and after the DVD needs to play?

tried the vlc player it's free to download and works better then other players really

DVD is not playing in my DVD player!

I made a movie in iMovie HD, created a DVD in iDVD, burned it successfully, and now that I try to play it on my DVD player, it is choppy and basically freezes and says "disk error". I can see the title pages and everything looks good, so I'm not sure what's going on. I took it to work and it only played on an old DVD player in someone's office, but not on my computer DVD player, not in other, newer DVD players. I burned the movie on a Maxell DVD-R, which I thought was a good brand. Do you think it has to do with burning speed? As I'm not sure what speed I set the burn for. It does play, however, on the apple DVD Player on my mac, so I know it works at least somewhere! The problem is that I gave this DVD to the bride (I edited her wedding) and she was unable to play it at her home. Any ideas????

Hi
I burn my DVDs at an as slow speed possibly. This can be set in iDVD08 or by creating
a DiskImage and use Disk Util tool or Roxio Toast™ to burn where speed can be
set down to x1
Speed is set by the no. on the DVD bought eg x16 and max speed on DVD-burner eg x8
in previous versions of iDVD. So forcing iDVD up to version 6, one has to buy x2 DVDs.
No other way possibly else using another program to do the actual burning.
I only use Verbatim DVDs
Only DVD-R (Single Layer)
Read this on iDVD quality = Result
*DVD quality*
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

My DVD is not playing any kind of DVD I get a message DVD not supported ?

My DVD player will not play. It is working and loads discs fine but message says DVD not supported ? Any help would be appreciated. I do have parrlels instaled on my machine. It happend once before and I had to mount DVD player on to the Mac but I do not know how . Thanks

Please mention what kind of DVD it is? A movie? Where did you get it from? Parallels has nothing to do with DVD Player.

Finished DVD will not play

Hi,
I have burned my project to a DVD using FCPX. The problem is that it will not play in my DVD player (8 year old Sony player). It gets stuck on the first picture but the sound is running. I tried to play it on the Mac and on a PC, but the same problem there.
The project is made with HD1080i and 50i frame rate. When burning I set everything to default.
The camera I am using is a Canon Legria HFM46
Any ideas what the problem might be?

One thing that comes to mind is that your player may not be able to handle the default compression settings that FCP uses. If you have Compressor, you could dial those down to see whether that fixes playability problem.
If you follow Emilia's advice and make a disk image you can also reduce the burn speed, which might be a cause. It's not clear from your most recent response whether it played from the img on your computer. Sharing to DVD from a 1080 sequence should work perfectly well otherwise.
Good luck.
Russ

DVD will not play on a Windows machine

I authored a project that is a simple looping movie. I has not interface, I just set the .mov to start playing and continually loop. It plays fine on my MAC but will not play on a windows machine from a DVD. The files included on it are all .bup .ifo, and .evo files. This is unusual because typically all the DVD burned .vob files to a DVD. Is there some setting I am missing when burning the dvd?

Wellcome to the forum!
What software are you using to play the DVD? If you make a little search in this forum you'll find a lot of threads about problems with DVDs running under Windows Media Player.
You can download free VLC Player to test your disks in Windows.
How did you burned the disc? If you want to be sure you are burning the right disc format anf the right files, make a Image file from DVDSP and burn it with Toast or Disk Utility. Take a look at this link for Creating Disc Image in DVDSP (from www.kenstone.net site).
Hope it helps!
Alberto

DVD will not play in dvd player

Hi,
I created a dvd in dvdpro and put into my dvd player and it says it can not play my dvd. Is there some sort of setting that I missed?

You misunderstand. You most likely created and burned an HD DVD in DVD Studio Pro.
iMovie will only build and burn standard DVDs so of course it will work.
Drew put up a link to another thread where this is discussed is excruciating detail. Read through it and you should be on you way to addressing your problem.
x

DVD will not play in PS3

I am using ILife '08 to render and burn family dvd. The video is imported from Canon HD20 camera. Iphoto project as well burned on dvd. I am using one of the 7.0 themes from IDVD 16:9 ratio. I am using a Fujifilm -R dvd media. The first menu will load and play but when I select either the movie menu or the iphoto menu on the DVD it locks up and will not play.
I tried a regular DVD player and it plays but is jumpy on it. The video is about 3 minutes long but the it jumps around almost like the dvd is scratched (it is not) and only really plays about 1.5-2 minutes of the video. Does anyone have any suggestions.
The dvd plays fine in my macbook pro.

I wouldn't worry too much about Toast not working well with i-apps. My honest opinion is that Toast should be part of the i-Life apps since it DOES work so well.
I only have Version 7 though and not 9 (so I can't really comment on Roxio's latest and greatest app).
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Dvd will not play in color

We recently purchased a samsung plasma/HD/3D tv. We have an older model Sony home theater system. We understood that we would not be able to use the 3d feature until we upgraded to a blue ray player but we thought everything else would work. We have transfered everything and everything works except the dvd now only plays in black and white. We have checked all the cables and have switched to a different cable but it still will not work. Are these systems not compatable? do we have to upgrade to a new dvd player? Does this have to do with it being a 3d tv? Or do we not have it installed correctly? Any ideas?

On samsungs, the composite input for picture (yellow cable) uses the same input that you would put the green component cable. So if you are using a 3 cable setup from the dvd and wii, the yellow cable needs to been in the green port. And make sure the red and white cables (audio) are in the audio inputs of the tv. If they are right next to the yellow cable, they are in the wrong spot and the tv will think your using component cables giving you a black and white picture. The audio inputs should be labeled.

DVD will not play in standard player?

Rookie to DVDSP. Created project in FCP, exported using Quicktime movie, brought into DVDSP and created dvd, first as HD DVD and read that a standard dvd player will not play so I created new project using all standard settings and still nothing. Dvd player says cannot read disc. I have watched entire tutorial on Lynda, read manual, and researched topics concerning this but am still stumped. Probably something simple but I'm really over my head and have wasted a pile of dvds. Any help would be appreciated.

First of all thanks again, watched Lynda tutorial on compressor and was able to compress. Ok, used setting for creating dvd in compressor. When compressor was finished it asked me to insert media to burn to disk. I did. The resulting dvd plays on my dvd player but looks horrible. Way too bright and nothing close to my project in FCP. From some of the tutorials and discussions I've read I'm assuming it is because my color levels are not correct?
Message was edited by: John Applewhite

DVD will not play and states "supported disk not available" and makes a weird noise and then ejects the dvd

My MacbookPro is only 5 months old and in really good condition. The only problem I am encountering is that when I insert any type of dvd disc, it starts to make this weird grinding noise that goes eeee-eeee, and then does that a couple of times and then the disc ejects on its own. When i try to play it with idvd, it does the same noise thing and then iDvd state "supported disk not available". The dvd does not even read on the computer.

If only five months old it is still under warranty. Take it back.

DVD's Not Playing....

Similar Messages

Maybe you are looking for