DVD's will not burn at their full speed

I've had my powerbook for about a year now and haven't had any problems with it until now. I recently just purchased Phillips DVD-R 4.7GB 120min 1-16x speed blank DVD's. My powerbook will only write them (using built in utils, and 5 other 3rd party burning software) at 2x speed.
I know that my powerbook is capable of much more than that. What can I do to acheive the full write potential?
Thanks
Powerbook G4 12'' Mac OS X (10.4.8)

Thanks for the information, I will check it out. My system profiler says that I have a
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
and under burning it says:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Thanks again.
Chris
Powerbook G4 12'' Mac OS X (10.4.8)

Similar Messages

DVD/TS will not burn - error with rendering menu video asset?

This 5-minute slideshow takes 45 minutes to prepare, then "could not burn", yet on my MacBook, a 10-minute slideshow took 3 minutes with flawless rendering/processing (granted I only had the 2 songs and 60 pics or so on my computer, not like my dumping ground iMac). I've spent 3 nights troubleshooting this. I have reinstalled Snow Leopard and repaired disk permissions. There are no yellow triangle/yield/error signs in the project.

Your comment about "dumping ground" suggests the hard disk may be too full. Even with a small project, you need a fair amount of space on the boot drive (your main hard disk) for iDVD to do all the processing. If you're under 10 gigs of available space, it may cause some trouble -- some around here recommend 15-20 gigs of free space when you're burning a DVD.
John

Qosmio G30: CD/DVD drive will not burn CDs or DVDs

hello everyone..
I am using a G30 notebook and from the moment i bought it i couldnt burn CDs nor DVDs using the built in rewriter!
Every time i insert a blanc CD/DVD into the drive, it cant be read and an error message appears (E:/ is not accessible, incorrect function) when i try to click on the CD/DVD ROM.
If anyone has any idea on what to do, please share it.
Thank you

Hi Mohamed
The same suggestion you can find here in this posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17212&messageID=62862
PS: If you use or have installed two burning applications on the OS so remove one and use only one burning program; for example Nero.

DVD drive will not burn CDs?

I am having trouble copying CDs. I've tried to copy an audio CD using both Windows Media Player 10 and Toshiba's Sonic Record Now, but both produce an error towards the end of the burn process.
I've reinstalled the DVD Driver and reinstalled Windows Media Player, but these actions haven't remedy the problem.
Has anyone got any other suggestions that might help?
Thanks in advance, Monkey

Hi
Try to remove preinstalled Sonic software and use Nero. I have used Nero on many different notebook models without any problem.

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

Help!! CD/Dvd will not burn

Can someone help? Satellite A135-S4527 will not burn either CD/DVD. I have installed RmvFltrs Toshiba DVD Rom but it did not help. I'm running vista 32 bit. I can be emailed at [email protected]
Thank you,
Marty

Try downloading and running the imgburn program. Google it. It is free and will burn CDs and DVDs.
This signature left intentionally blank.

Blank 16x DVDs will not burn in internal DVD burner

Hi
Some blank 16x DVDs will not burn in the internal DVD burner on my iBook G4.
My iBook tries to load the DVD-Rs but it spits the DVD out after 2 tries.
Any reason why
iBook G4 Mac OS X (10.4.8)

It could be just the brand you are using.

My Adobe Premiere Elements 12 will not burn a DVD.

My Adobe Premiere Elements 12 ................. will not burn a DVD. I am using an ASUS model 11BB Desk top I recently purchased. The PC shuts down immeniately. I am using DVD-R mini and standard size disc. My subject Adobe works well on another computer.
Ken McAdams
Message was edited by: Geoff the kiwi
Serial number removed.
Note: never disclose your serial number.

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

TA44597 I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it.

I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb. iTunes recognises when I have inserted a cd to play but will not burn to it. help!

Portsian wrote:
I'm trying to put playlist onto cd. My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.
Is it also a CD/DVD burner? Or is it kjust a CD/DVD player?

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair.

HPE 180T does not recognize disc BD-RE BH20L, will not play a movie and will not burn a disc. DVD

My blu-ray will not recognize dvd-r, will not play any dvd or burn a disc. I ran all the diagnostic test and it says disc scratched, dirty or hardware problem, (Hardware Problem).
8/10/2009 firmware B57A
product#MXY00204HR, Driver Serial#B91D5P4022227. I have a dvd drive works fine.
I need to burn disc and realized I can only do it through optic drive. Being windows 7, I cant just burn the info. on my vista.
I have an old XP{ and it would be a shame to say I spent all this money on this machine and I cannot even burn a Disc!

Hi
To give you some precise answer it will be interesting to know which DVDs are not readable. Meaning of word 'some media' is to general and not helpful to understand the problem.
Satellite A30 is pretty old notebook model and it is possible that ODD functionality is not good anymore. You can try to clean the lens.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

DVD's will not burn at their full speed

Similar Messages

Maybe you are looking for