DVD SP burned disc won't play on DVD player

I recently compiled a FCP HD project into Standard Defintion 16:9 and imported it into DVD SP 4. I build, format and burned a DVD-R disc without any problems. However the disc won't play on any of the DVD players in my house (1 philips and 1 Pioneer). I checked all settings and can't find anything wrong! Remarkably, just before this I burned an older (SD 4:3) project on the same brand/type disc and that one worked flawless.
What am I missing, pleas help!
Evert

Double check to make sure you did not make an HD DVD (take a look to see what is on the disc, are the folders VIDEO_TS and AUDIO_TS or other name? It can happen where you think you made an SD but it is HD ) Also did you set a first play? Did you somehow make an NTSC (or PAL) and playing it on a machine that is not NTSC/PAL as applicable?
What brand media did you use? Some brands can be inconsistent...

Similar Messages

Burned disc won't play in CD Player

Help Please!
I burned a disc in iTunes.
The disc will play in the computer;
but it won't play in the CD player in
the car or the home stereo.
I suspect it is a file extension issue,
but I don't know how to check or change
anything.
Thanks in advance for your help!

Yes Audio CD should play just about anywhere so if it's not playing then it's not down to the setting you have chosen. It may just be your players, some can be fussy about what they will read, or it could even be the CD media itself. Have you been able to play CDs you've burned before or is this the first time you've had a problem? Have you another brand of blank CDs you can try?
Another thing you could try is reducing the burn speed and see if that helps, especially of you have it set at Maximum Possible. Open iTunes and go to Edit>Preferences>Burning and reduce the Preferred speed down. The packaging for your CD should have a maximum burn speed quoted somewhere, go lower than that. For instance if it's 24x try burning at 16x

IDVD burned discs won't play on any dvd player

When I burn a dvd using Idvd they will not play on standard dvd players.
Is this a problem with anyone else?
I noticed it was a problem in the early 2000-2003 but apparently something got fixed, because I couldn't find an incident where this problem continued to occur.
I am new to the Mac world and I don't always understand the acronymns used when I read responses. However, here is my problem.
Burning dvd's using Idvd:
1. the burn seems to run and function normally
2. when I insert the burned dvd into a dvd player one of the following things occur:
a) loading takes a very long time, then I get a message saying "wrong disc"
b) loading occurs fast, reads the file as a dvd, the dvd begins playing the music and showing the main menu screen, after accessing a menu option the dvd begins to play the slideshow with the music then after a minute or two, it freezes, and is no longer readable when attempting to reload it, the message is "wrong disc"
3. I've tried using dvd-r, dvd+r, dvd+r dual layer, and changing the burn speed to 8x, then to 4x and then to 2x. Nothing seems to matter.
4. I have noticed that in Idvd the dvd type is for an older version of dvd's such as single layer 4.2 gb and double layer 7.7 gb. I'm wondering whether the Idvd software on my MacMini is up to date, even though when I check for updates under the apple it comes back saying my system is up to date.
I'm using a MacMini running Mac OSX v 10.6.8 with processor 2.26ghz, Intel core 2 duo, memory 2gb 1067 mhz ddr3, and my dvd drive is a pioneer dvd-rw dvrts08, firmware q81f.
I really need help to fix the problem with the IDVD software or to know that I need to purchase another DVD maker software for my Mac. The product below says my Mac is running OS X v 10.7.2 but it isn't it is running v 10.6.8 as I stated.
URGENT!!!!

My macmini is under 2 years old. I reviewed your list of affects and I am going down the list to determine possible cause and effect.
I did try the PRAM process. The DVD still won't play on my DVD player but it did play on my son's Sony blue ray. I burned it at 2x burn rate after the PRAM process completed.
I can assume that's progress. The audio did however skip a couple of times while playing. That is new.
I will continue down the list using different type of blank dvd's etc.
Question: As I was reading through some other issues I'm learning that Mac/Apple is discontinuing IDVD, is that correct?
Are you aware of some other software to purchase that will create dvd's on the mac? If so, I may as well go that route rather than wasting more time using a defunct product. What is your opinion?

Dvd disc won't play on dvd player

Hi I,m quite new to apple ,i need help as i burnt a video off sd card onto dvd it plays great on my macbook pro but when i try to put it in my dvd player so i can watch it on tv the dvd player won't read it. i have gone through 8 dvd,s trying to sort it.
Any help greatly excepted .
Christine

I WAS NOT AWARE THAT I HAD TO USE A SOFTWARE, I RANG APPLE AND THEY TOLD ME TO DOWN LOAD VLC PLAYER BUT IT DIDNT WORK.
I DOWNLOADED THE SHORT VIDEO FROM SD CARD ONTO DISC AND CAN PLAY IT NO PROBLEM ON MAC BUT IT WONT PLAY ON MY DVD SO I CAN WATCH IT ON TV. I HAVE USED 8 DVDS TRYING LOL TRIED TO RING APPLE AGAIN BUT IT JUST HAD JUST CLOSED
BEEN ON THIS SINCE 6PM LOL
CHRISTINE

Disc won't play in DVD player

I just burned a project with iDVD 6 and while it works fine on my Mac, It won't play on my regular DVD player. I know that my main DVD player plays DVD-R because it has played every DVD that I've recorded from my spindle. I test them all on this player. I burned 2 copies of this project and neither would play on my main DVD player... but they would play on my bedroom DVD player. What could this be?

What could this be?
It could be one of several things (or a combination thereof). A dirty lens on the set top dvd player for example. When is the last time you used a quality Maxell or 3M dvd lens cleaner kit? Avoid cheapy kits since they can cause more issues than they resolve.
It could be the media itself.
It could be that you need to lower the burn speed to make the media more readable to this particular set top DVD Player.
It could be that your set top player is a bit dated and refuses to play newer media/s.
Best to take your finished iDvd to a store that sells these DVD Players and try it out on several machines. See if it still happens on other players as well.
Btw, please tell me you are not using Memorex or TDK. I recommend Verbatim or Maxell (your choice) while troubleshooting on this iDvd Forum.
Message was edited by: SDMacuser

Burned DVD on iDVD. Won't play on DVD player

I burned a slide show on iDVD and when I put the disk in my DVD player or back in my computer it won't play.

Hi
My thoughts on this - this occures to me when
• Using Cheap brands of DVD e.g. Memorex and NoName are bad choice for Video-DVDs (might work as Data-DVDs)
I use Verbatim (only)
• DVD type used - I use now DVD-R as they also play on older DVD-players - NEVER +/-RW as they are known problem makers
• BURN SPEED - I now set down burn speed to x2 or x4 = Less burn errors = Plays on Mac that made the burn and so on PCs - Works so much better
Yours Bengt W

Burn dvd's from mac won't play on DVD player

I'm getting an error 'can't read disk' from my samsung bd-p2550 when trying to play a moving i created on my Mac Mini. I've created the movie using iPhoto to create a slide show movie. i renamed the resulting file from M4V to MP4 and burned to a DVD-R disk. inserted into the samsung dvd player and got the error message, even though the samsung is supposed to support mp4.
next i downloaded FLV Crunch and converted the MP4 to VOB(mpeg 2) format. burnt to another disk, same error.
i did some google searching and they talk about VIDEO_TS directories (which i see on my store bought movie dvd's). is there some directory structre that makes movies playable on a DVD player connected to a TV?
i can play the dvd's on my Mac Mini from the internal DVD drive, so that seems to indicate the file structure is ok.
Any other thoughts?
thanks!

bullinchinashop wrote:
I've created the movie using iPhoto to create a slide show movie. i renamed the resulting file from M4V to MP4 and burned to a DVD-R disk. inserted into the samsung dvd player and got the error message, even though the samsung is supposed to support mp4.
next i downloaded FLV Crunch and converted the MP4 to VOB(mpeg 2) format. burnt to another disk, same error.
i can play the dvd's on my Mac Mini from the internal DVD drive, so that seems to indicate the file structure is ok.
Any other thoughts?
thanks!
Why use mp4 if it to be played on a DVD Player?
Save the project as a DV mov file and burn the DVD again in the usual DVD format of mpeg2.

Hddvd disc won't play in dvd player?

I took 49 mins of hd video edited in fcp and compressed it to quicktime h.264 video for dvdsp. The project is 4.5 gb. My prefs in dvdsp show 1280x720p resolution with a 16:9 letterbox. The encoding prefs are one pass vbr with 18.0 bitrate.
I simulated and burned the project fine. The resulting dvd will not play in either a dvd player or a tv with dvd combined. It will only play in my mac.
Is this what I should have expected? Can hddvd's not be read in today's players?
MBP 17", 2.16GHz, 2GB Ram Mac OS X (10.4.6)
MBP 17", 2.16GHz, 2GB Ram Mac OS X (10.4.6)

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

DVD created with Encore won't play on DVD player

Hello everyone,
I didn't reply to the other topic I posted here, but that problem (I think) is fixed. It turned out to be a size problem. I just reencoded the main movie at a lower bitrate and that problem should be resolved.
The final disc image now comes out at about 6.8-7gb out of an 8.5gb dual layer disc. So I should have plenty of room with no space issues.
However, I am having a new problem that I didn't have before. I really am feeling a time crunch to finish this project in the next day or two. Everything is finished. It looks great. I built an iso with Adobe Encore and mounted it and tested it in PowerDVD.
Everything was completely flawless. All the menus, the videos, the animation, everything.
So I go to burn the disc with Imgburn. I burn it at 2.4x (the slowest my drive will write at). Anyway, when it is finished it will NOT play on my dvd player. Actually, I am using a PS3 to test it out but it is the only dvd player I have to use right now. I have burned many discs with Encore before and they all worked great on my PS3.
So, I have traded one problem for another. When I posted my previous topic, that disc I burned played on my PS3. Part of the video was cut off but it played at least. I can get the disc to play on my computer though. I don't know if it is reading it as a folder or what.
I have tried redoing the project from scratch twice. I removed all the assets, started a new project and carefully imported all the menus, videos and subtitles one at a time to be sure I didn't do anything wrong. I looked for any settings that could be screwing things up but I couldn't find any. I think I burned three or four discs that have all turned out the same.
Are there any specific settings that I might be missing? Why would my disc not be playing in my PS3?
Please help me finish this project.

I am using a PC, Windows 7 64bit.
The burner is an LG WH08LS20.
The media is Verbatim DataLifePlus Inkjet Printable DVD+R DL discs.
The problem is I have created many, many discs using Encore that have played perfectly fine on my PS3. In fact, just a couple days ago when I created the last topic I created a dvd that played fine on my PS3. It had problems with cutting off parts of the video like I said, but at least it played.
I don't think I am doing anything different in the creation of these discs now. I am completely stumped.
When I put the disc in my ps3 nothing happens. The dvd doesn't load automatically. And there is no option under "video" to select it.
Do you have any ideas that could help me fix this problem?

MATSHITA DVD-R UJ-816 won't play *some* DVDs now (mysteriously!).

Quite mysteriously, my Mac is refusing to play some of my DVDs.
The DVDs aren't scratched or unplayable. I tested them this weekend on someone else's multi-regional player.
These DVDs most certainly did play before on this laptop (a late-2003 Titanium Powerbook--details below) but now just do not! Won't read at all. The DVD never mounts on the desktop. Sputtering. Eventually get spit out.
The two DVDs that my Mac now refuses to play are GRAHAM NORTON FOR YOUR PLEASURE [Region 2] and TABOO THE MUSICAL [Region 2 or maybe Region 0].
I can't imagine what's happened/happening. These played fine as recently as March 2007. I've done nothing to my firmware since that time (on purpose, at least!).
I just got the new BEAUTIFUL PEOPLE DVD [Region 2] and it plays just fine. It also plays all Regions (limits reset by Region X).
Any idea at all why my drive refuses to read/play certain DVDs?
Your help &/or theories are appreciated!
Thanks.
==
BIG BUNNY’S TITANIUM POWERBOOK G4 (15”)
System Version: Mac OS X – v. 10.4.11 (Tiger)
Kernel Version: Darwin 8.9.0
Machine Model: PowerBook5,2
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1
MATSHITA DVD-R UJ-816 (Firmware Revision: XXJ3)

It started the same way on my PowerBook G4 15" aluminum with the same optical drive (my laptop is from Sept 2003). After reading some DVD/CD and some not (even didn't recognize them in Finder), once, when I tried to write something on DVD-R (or+R - I don't remember) it didn't do the task - neither with Toast Titanium 9.0.4, nor with Dragon Burn 5.0.5, nor with Disk Utility...!?
One of Geniuses in one Apple store told me my optical drive is about to "die" and I shoul replace it. Well, the estimated cost of replacement was close to $450.
I decided not to do it within Apple.
I ordered new optical drive "*+Apple SuperDrive 8x DVD Burner Drive - Aluminum or iBook G4+*" (MATSHITA DVD-RAM UJ-875S - Reads DVD:Yes; CD-Write:-R, -RW; DVD-Write:-R, -R DL, -RAM, -RW, +R, +R DL, +RW; Write Strategies: CD-TAO, CD-SAO, DVD-DAO) from POWERBOOK MEDIC.COM for $99 + shipping. I replaced it myself for about 2 hours. Replacement by professional shouldn't be more than cost of the part.
Now, I have a new powerful and fast optical drive working as a dream.
I wish you lack.
prof. DEJA VUE

Burned CDs won't play on portable player

My friend who has a PC has been burning CDs for me of spoken-word MP3s. They play fine on my portable CD player. Recently she gave me a USB drive with a bunch of MP3s for me to burn myself on my new MacBook Pro. The CDs I burned won't play on the CD player (but they will play in iTunes on my computer). I don't understand what's going on...can anyone help out? Thanks.

Yes, if your interest is only in burning CDs and you don't want to keep the music in iTunes, the process is pretty cumbersome. You may want to buy a disc burning application like Toast, which can burn all sorts of formats without your needing to import anything into iTunes.

Burned CD won't play in car player

I know similar questions to this have been asked, but I have not found a solution that works for me yet. I am burning a CD-R with iTunes, but it will not play in my car player. I have tried burning at different speeds. I have tried 3 different media types (Verbatim, Memorex, generic). None of them worked. I checked my iTunes settings to make sure I am burning an audio CD, and not an MP3 or data CD. I've probably burned 15 CDs to no avail.
I am burning them on a Sony drive. The CDs play fine in my computer. Just not in my car.
My car player is an older player (1996 factory Delco), but it has no problems playing normal CDs. I get an "E20" error message if that makes any difference.
Is it just a matter of trying more media types? Anybody have a media type that they got to work in an older Delco CD player? Any other suggestions? Thanks.

I solved my problem. I can't guarantee this will work for anybody else having this same issue, but it worked for me. Since my player is 10 years old, I thought maybe the problem was the newer size of CD-Rs. So I bought some of the older, smaller size CD-Rs (650 MB versus the newer 700 MB). Now I can't be sure that was the total reason it worked, but it now works with these new CD-Rs. They are also Verbatim brand, which I also tried unsuccesfully with the 700 MB size. These Verbatims are not only 650 MB, but also a light blue tint on the bottom, which may also have made a difference. I don't know. I couldn't find any of these older, smaller CD-Rs at any local store. I found them on Amazon and ordered them there. These are the ones I ordered if you are interested.
http://www.amazon.com/gp/product/B00006OX3P/102-3663220-6179311?%5Fencoding=UTF8 &v=glance&n=172282
Again, I can't guarantee these will work for you. There are probably many reasons why iTunes burned CDs won't work in some players.
Dell Inspiron 9300 Windows XP Pro Sony DVD+RW

.mov burned but won't play in DVD player

No problem with previous 4 burns 6 months ago
iMovie 5.0.2- Toast Titanium 6.1
I have burned DVD in DVDVCPRO-NTSC and DVCPRO50 - NTSC and neither will play on my (old) DVD player.
Problems is this is to be shown for a wedding Sat., I leave in the a.m.
It will on play on my desktop
I do have husbands laptop - Windows whatever I will see if I can connect to TV
Any other format to try burn? Do I just need a new DVD player? I'll hope they have a newer one.
Thanks - I am running out of time.

Hi Patti,
welcome to this forum
there's no such thing as "DVDVCPRO"-video-dvd.... that is just an export option in iM for.... you're short in time, forget it...
in Toast 6.1.1. (you need the latest update), choose "video" and simply drag'n drop your whole iM project (NO export needded!) into it - boom, done...
post here progress of your project, the European dayshift is awake ;-))

Burned disc won't play on CD players but will play on PC

iTunes informs me it has burned my playlist successfully to a CD-RW, but when put in a CD-player, 'disc' comes up. When I put the CD-RW into the PC again, iTunes tries to import the songs like its a normal audio CD. The settings in iTunes are set correctly to burn on the disc format 'Audio CD', and the burner itself, when I've 'Checked for updates', is apparently up to date. What can I do? Should I use a CD-R intead of CD-RW?
Any help would be appreciated!!

+"Should I use a CD-R intead of CD-RW?"+
Yes. Many "normal" (i.e. non-computer) CD players cannot handle CD-RWs. When burning an audio CD to play in a regular CD player or car stereo, always use a CD-R.

Burn Disk Won't Play in CD Player!

I can burn an audio cd in itunes succesfully, however when I try to play the audio cd on my car cd play it won't work....someone help!

Now I have this problem as well. I'm trying to burn an audio CD from iTunes that will play in my car.
At first I thought it was an iTunes purchased music issue, but I tried burning a cd containing a mix of music I've imported into iTunes and purchased from iTunes. Same result. I've tried changing settings, different cd brands with no success.
I have been able to create cd's from playlists for my car in the past, but now all of a sudden I'm having no luck. The burned cd's play fine in my computer and in other people's computers, just not in my car's cd player (tests ok with other cd's).
I've even tried importing a burned cd back into iTunes then burning a disk off of that playlist, with exactly the same result. The cd just clicks in the car cd player.
Hoping this is something really simple, hoping someone can help.

DVD SP burned disc won't play on DVD player

Similar Messages

Maybe you are looking for