DVD SP Dual Layer burning and DVD@ccess difficulties

I'm making my first dual layer project and I can't format from DVD SP 3 b/c I get this error message (see below). I burned the project in toast 6 and the project works fine in Macs except for the URL DVD a@cess link doesn't connect. (It works in my computer) The DVD 2nd layer doesn't work in some PC's. I"m using Verbatim + R DL Media. Can anyone give me some suggestions?
Can anyone explain this error message to me:
Formatting was not successful. Layer 1 cannot exceed Layer 0 for a OTP configured disc. Please choose a suitable marker location that will support this condition.

Hey James
this particular error means that layer 1 is larger (as in size) to layer 0.
since we dont have enough details of your project, i cannot correctly tell you what to do.
i will ask you however, where did you set your layer break? tell us how much larger layer 1 is to layer 0. what will you be burning your image to, DLT, disc, hard drive? did you check the format properties and see where a suitable layer break can be? did you set layer break to automatic?
any help could give you a fast answer
Mikey M.

Similar Messages

Dual Layer Burning In DVD Studio Pro 3

I am working on a 2 plus hour project. If I want it to fit on a standard 4.7 GB Disc I will most likely have to compress it a great deal. I have a dual layer burner and media. Is there a switch or setting I can use to simply burn to dual layer? The video is over 2 hours and I want 3 audio tracks and some special features. Burning to dual layer would allow me not to compromise any quality etc. Thanks.

Is there a switch or setting I can use to simply burn to dual layer?
Yes. You just select the disc type (in the normal way). What is trickier is setting a suitable layer break-point. You either have to make sure that you do have chapter marker(s) at a suitable place, or - if your material is made up of short elements - 'balance' them between the two layers.

HP BDDVDRW CH20L & Dual Layer Burning

The above DVD burner came factory installed. I am curious if it does dual layer burning for DVD?
Have a video project that will not fit on 4.7GB dvd.
Thanks in advance.

Nevermind, it says it does right on the tray. Cool!
Next time I will look first!

Correct way to burn DVD-R Dual Layer? Power Mac G5 or MBP Early 2008?

I have several software titles I have purchased and they are on dual layer dvd, I am using Philips DVD-R dual layer, I have a Power Mac G5 and an early 2008 Mac Book Pro, I have been unable to successfully burn a back-up on either drive. I am noticing dual layer seem to be an major problem across the board, but in the past this has been the place I come to get my answers.
Thank You in advance,
Sebastian

http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
I believe this is pretty much what I did. ^
http://discussions.apple.com/thread.jspa?threadID=1453988&tstart=0
here are some possible solutions for your error... ^
keep me updated and let me know if anything works....

DM4-3055DX DVD-Dual Layer Burner

I have a DM4-3055DX notebook
i wanted to burn some home movies and i purchased DVD-R DL - Dual layer DVD to increase the capacity of the DVD to 240minutes or 8.5 gb
my question is how do i know or find out if my notebook has a DVD-Dual Layer Burner. or supported Dual Layer DVD-Rs
thank you

Try this free Nero info tool
http://www.softpedia.com/get/CD-DVD-Tools/CD-DVD-Rip-Other-Tools/Nero-InfoTool.shtml

Burning a Dual Layer Disc through DVD studio pro

Formating failed
The recording device reported the not ready error: Cannot write medium-incompatible format (0x30, 0x50)
I need to know what is going on. I tried to burn a DVD studio completed project on a dual layer disc on my mac (which has dual layer capablities) and kept getting this message. I think it is the disc itself but don't have a clue what I am doing wrong.
I have been able to burn the video TS (etc) files to the desktop completely but when I try to burn to the DVD I get this error message.
Can you help.
Thanks
Susan

Which burner do you have?
What type of media? DVD+R DL or DVD-R DL? Brand?
Is your DVD Studio Pro project set as dual layer?

DR4-A and DVD-9 Dual Layer

Hallo.
I purchased (December 2003) a DVD DR4-A but when I try to read a DVD in format DVD-9 (Dual layer I suppose) I am not able to read it, instead the other DVD media, not Dual layer are readable by DR4-A.
I tried to install my DR4-A in another PC but I obtain the same problem
I am not able not even to browse it from explorer.
If I try that media DVD-9 in another DVD optical I am able to see it.
So I think that the problem is on my DR4-A
I tried to upgrade firmware to 2.50 version but I have the same problem.
I have a PC with Windows XP Pro SP1.
Can you hel me?
Thanks for your help.
Mario from Italy

It looks to me that you had bad luck and received a defected drive. I suggest you return the drive to your vendor and ask for replacement - I have the same drive and no problems with any DVDs. Moreover, do not upgrade to firmware 2.50 if you want to use CloneCD - this fw is a piece of that does not support RAW DAO/SAO modes that are needed by CloneCD (and maybe some other soft) for copying some copy-protected CDs. The latest usable fw is version 2.30.

Memorex DVD+R Dual Layer & Power Mac G5

For some reason my G5 want read a Memorex DVD+R Dual Layer disc that my friend burnt for me. I put the disc in, and the computer just spits it back out at me. Is this normal? What can I do? I got my G5 in 2004 can newer G5s read Dual layers? My friend made it on a Power Book so I dont see why I cant read the disc.

Yes, they are relatively new. For more on the history of DVD, see this page:
http://www.videohelp.com/dvd
I typically buy double sided DVD-R disks to burn more than 4.7 GB of data. These you flip over when you want more content than can fit on one side of a DVD. Alas you have to split up the content. Depending on the type of content this can be done by segmenting an image, or compressing the data itself and segmenting a compressed file. What's odd is that some disks which appear on the surface to be dual layer because of their single sided capacity, such as the Tiger installation DVD, are in fact readable by all DVD drives that are on Macs, whereas the commercial DVD+R DL is not. I don't know the difference between commercial and consumer grade Dual Layer disks, but there does appear to be one which makes them readable on Commercial grade whereas Consumer is not on older DVD players.

Verbatim DVD+R Dual Layer 8.5GB Printable Discs - Anyone?

Just wondered if anyone had used Verbatim DVD+R Dual Layer 8.5GB Printable Discs or even just DVD+R Dual Layer Discs in their superdrive and whether they had been compatible ok? Im thinking of buying some but want to ensure compatability before i buy because theyre very expensive!
Cheers
Rowan

i am burning as we speak, a verbatim dual layer dvd and have had no problem.
Unfortunately, that wasn't the question. You are probably using Verbatim DVD plus sign R DL, whereas Graham is asking about DVD minus sign R DL. Please qavvik, check out that little detail on the discs you are burning and let us know.
Graham's question is actually extremely timely for current iMac users. Anybody know for sure if these new -R DL discs are compatible with the current SuperDrives, such as the Pioneer DVD-RW DVR-K04L? Did Graham get a bad batch?

DVD R DUAL LAYER vs. DOUBLE DENSITY???

What kind of Dual layer / double Density DVD R works with a mac pro dual to make copy of program back disk 7gig plus in size? i already tried MEMOREX and my drive kept spitting them back out. they were DVD R DL...

The machine in your signature ios NOT a Mca Pro. A Power Mac G5 is totally different.
Memorex discs are likely the worst choice that you can make. Verbatim or Taiyo Yuden are all that I can recommend. Buy slower rated, rather than faster.
http://www.digitalfaq.com/reviews/dvd-media.htm
You don't say what optical drive it is that you have. There are variations on what different drives support.
In OS X 10.5x, DVD-R DL is best to use when burning in Finder, etc.
Third party software may have additional support, but eventually, an optical drives firmware is the final determiner in compatibility.
The latest, fastest media will have the WORST compatibility with old drives.

DVD-R Dual Layer copatability

I've been burning DVD's from i-DVD to DVD+R Dual Layer DVD's for some time without any issues now.
I've just bought some DVD-R Dual Laer disks from Verbatim and my i-mac does'nt even seem to recognise that he DVD is in the drive & spits them out again.
Does anyone know if there's a way to check if my superdrive is compatible with these disks?
Cheers

i am burning as we speak, a verbatim dual layer dvd and have had no problem.
Unfortunately, that wasn't the question. You are probably using Verbatim DVD plus sign R DL, whereas Graham is asking about DVD minus sign R DL. Please qavvik, check out that little detail on the discs you are burning and let us know.
Graham's question is actually extremely timely for current iMac users. Anybody know for sure if these new -R DL discs are compatible with the current SuperDrives, such as the Pioneer DVD-RW DVR-K04L? Did Graham get a bad batch?

Dvd-r dual layer

Hi all.
Which kind of encore version (if one) is able to burn dvd-r dual layer?
I have to burn dvd-r dual layer to allow the dvd to run on Mac.
Do you know any other possibility to produce a dvd dual layer that is visible also on Mac?
thanks in advance
mirko

Since you're starting your search now, CS3 is the only current version, and since it's bundled with Premiere (for CS3), there is not trial. CS2 also handles DL DVDs and does a fine job of it, but it is not directly available, at least not from Adobe, or any of the normal reseller channels. This is just FYI only.
Hunt

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Mac Mini 2006 MA607LL/A need to buy dual layer burner

Hi guys. I bought a MA607LL/A mac mini. I need to upgrade so it can read dual layer burn cd. So I guess super drive? Which one will fit? Ty

I wouldn't waste the time or money upgrading it to a Superdrive.
Your best bet is to get a faster and more reliable external tray loading USB desktop DVD Drive.
For Example: I'm happily using an LG GE24LU20 that I picked up on sale at BestBuy a few years ago.

Dual Layer Burning (Mac Mini 1.42) UJ-845C

So I understand that the Matshita UJ-845C superdrive is capable of burning Dual-layer DVD's, however it appears that perhaps that support has been turned off in firmware version DPP9? Anyone know if there is a firmware update for this that will enable the Dual-layer burning? Seems a shame to have a DL capable drive without DL support :,(

My System Profiler Information does not show "+R DL", yet other peoples systems with the same model drive (but different firmware) DO show the "+R DL" which would be a good indication that the drive is merely firmware crippled to not support "+R DL".
As for evidence, I think that showing that:
a) Other peoples Superdrive model UJ-845C supports "+R DL"
and
b) The same drive (Matshita/Matsushita/Panasonic) OEM'ed to other Manufacturers (Toshiba, etc.) supports "+R DL"
is a definitely excellent indication that this drive is "+R D" capable and that the DL capability has been crippled in firmware. Now the question becomes how to get the "real" drive stats from the drive without reading it straight from firmware or otherwise check the drive in a different manner?
This could be accomplished 2 ways that I can think of right off of the top of my head:
1) Extract the firmware from the same model drive (UJ-845C) with the D8PB firmware and then update that firmware on a UJ-845C that has DPP9 firmware and see if it then supports Dual-Layer burning.
Obviously doing will void any warranty, however if the drive does not support "+R DL", it is not a great loss, as it can be replaced with another model UJ-845 that does support "+R DL"
2) Speak with Panasonic regarding this particular part number and see what they have to say about the capabilities of the drive and whether or not it is a feature that is disabled in firmware
I have sent an email off to them already regarding this and hoping that I will receive a reply soon.
3) Speak with Apple directly regarding this particular UJ-845 model number and see what they have to say about it's dual-layer capability and whether it is turned off in firmware or not.
While I agree that when purchasing a new machine you can only count on the specs that Apple provides as to the functionality of the machine, if indeed the "+R DL" feature is merely turned off in firmware and the drive is indeed capable of supporting this, then that would mean that Apple deliberately turned it off, and the question becomes "why?" The most likely answer would be that they were advertising other more expensive machines that had "+R DL" capability such as the Dual-G5 and the iMac G5, and again we come to the question of "why?"
I have been using Apple machines since way back when..around the time of the Apple ][+ and I love the company, however if this is a firmware disabled feature, then Apple should provide a firmware update to D8PB that would enable the "+R DL" functionality that all specs on the drive that have been found elsewhere on the internet claim it has.

DVD SP Dual Layer burning and DVD@ccess difficulties

Similar Messages

Maybe you are looking for