DVD SP Version 2

I have been unsucessful in using DVD Studio Pro version 2 on this new intel machine. Is the software at issue or is the machine at issue. I have already had to buy new versions of FCP Express and Music Maestro (Now Sonicfire Pro) as the older I had installed would not run on the MacBook Pro.
Thanks,
MacBook Pro Mac OS X (10.4.3)
MacBook Pro Mac OS X (10.4.3)
MacBook Pro Mac OS X (10.4.7) 17" Display
MacBook Pro Mac OS X (10.4.7) 17" Display

You will need the Universal versions of the Suite to run on the Intel machines (some people seemed to have gotten newer versions short of Universal, such as DVD SP 4, to run, but it is not suppossed to and there are also problems)

Similar Messages

Dvd player (version 5.7) keeps quitting

I updated to 10.10 and now my dvd player (version 5.7) keeps quitting unexpectedly; that's the message I see when I have tried to open the app. Am I missing an update? I have already restarted the computer and it wasn't effective. What else can I try?

Update...
I found that if I try to insert a DVD disc in and let the computer read and recognize it as a DVD. It will open up to the Main Menu of the disk and hang. I can quit the application and it shows closing; but I still have to go into Activity Monitor and Force Quit the application in order to get the disc out.
Now, if I open up the DVD Player before I insert the disc. I have no problems with the disc playing. It reads the Menus and Chapters just fine. And once I close the application, I also have no problem ejecting the disc.
Still looking for suggestions as to what might be causing the issue that I am seeing.
Thanks
TRS

Export sequence to DVD FCP version 6.6

Can any one help me and explain step by step exactly how to export a timeline sequence to DVD? plus can you capture and edit HDV in FCP version 6.6?
Thanks

step by step exactly how to export a timeline sequence to DVD?
http://discussions.apple.com/message.jspa?messageID=10955058#10955058
can you capture and edit HDV in FCP version 6.6?
[HDV workflow in Final Cut Pro|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkflo ws/#chapter=2%26section=0]. Link goes to the manual for FCP 7 but the procedure is identical.

Need help in DVD SP version 1.5.2

I know that I have a very old verson of DVD Studio Pro, and will purchase the new Final Cut Studio when I purchase a G5, BUT I have a quick question.
I am using iMovie 6 and I am trying to export in the expert mode as a MPEG-2 file, so I and import my (.AIF) and (.M2V) files into DVDSP 1.5.2.
I was able to do this without any problem when I was using iMovie 5, but in 6, when I export in exactly the same way as before, iMovie6 quits.
Can anyone out there help and let me know what I can do to make this work?
Thank you.
Marc

Not sure how you have the system set up or if you can make a boot FW disc with your older OS, but there was MPEG encoding capabilites via Quicktime with DVD 1.5, but I would also guess the "Pro" key or equivalent would be knocked out. You could also get a QT Pro Ket to unlock the export, and it should allow export direct from QT (but not 100%)
Do you have iMovie still on the disc to try that?
Is direct from QT on your machine?
You may also want to try a reinstall of iMovie 6 & repair permissions. Have you also tried a new user account?

DVD Player Version 5.0.1 crashes with Leopard

Good morning
Leopard is working fine on my PB, but when starting a DVD, the DVD Player crashes the whole system. It is so bad, that I have to "force restart" (on/off button) the machine.
Any idea how I can fix the problem. I allready reinstalled Leopard from the bottom up, but it did not help.
Thank you for your help and assistance.
Mediapet1

The problem is an Leopard update relased by Apple:
Leopard Grafics Update 1.0.
It is a separate file, which can be easily deactivated in the Software Upgrade Window.
Do not install this upgrade on a PB G 4 1.33 machine. If you do a "Archive and Install" to get your DVD back to work, make sure, that you DO NOT install the mentioned upgrade. I you do, "adios" DVD player. Shame, Apple did not tag this upgrade to not be installed on this models. It reminds me a bit of the PC world...
Never mind...

Installer DVD version number question for FCS 3

Hello All,
I just purchased a used FCS3. Upon inspection of the DVD, all of the DVDs say "Version 3.0, 2009", except for the DVD Studio Pro which says "Version 2.0, 2007"
Now I know apple didn't do much for DVD Studio Pro between FCS2 and FCS3. So I want to know if they at least updated their installer DVD in the FCS3, or did they just recycle the FCS2 installer DVD?
Can someone check their FCS3 installer DVDs and verify that the DVD Studio Pro installer also should say "Version 3.0, 2009"? I think the seller may have accidentally swapped the FCS2 installer in there by mistake, but I wanted to make sure before I start asking questions.
I own FCS2, and the DVD Studio Pro DVD is identical..
THanks

The DVD SP app is on the main disc - although there is a separate disc for the additional content such as templates etc.
You should see this in the installer dialog...
Main disk contents...

DVD from hard drive

How can I play DVD that I rip with DVD Shrink and that now I have on an external hard drive on my macbook
Please advise
Thanks in advance

Did you try DVD player. It comes on the Mac. It will play the video_ts folder just like you had it on a dvd. I store certain favorite movies on my external hard drive in this format. That way I can watch them on my computer without the physical dvd in and get the same quality.
Once they get converted to .avi or other format then you lose some of the resolution. I do this for movies I am going to watch on my iPod. I usually have two version of my favorites on my hard drive.
The DVD ripped version and the iPod version. With a large external drive I don't care that each ripped movie is 4 gig or so in size.
If you use the dvd player do not try and open the folder that has the movies name. It will come back with an error. Open the sub-folder called video_ts. Then it will work correctly.
Mort

What is wrong with DVD player 5.0.3?

Not only is there the really annoying corruption reports on discs that work fine with VLC:
http://discussions.apple.com/thread.jspa?messageID=9834535#9834535
but my DVD player version 5.0.3 on Leopard 10.5.7 has started another irritating habit. Periodically, for no particular reason it jumps out of full-screen mode into a small window. It does this on both my Macbook Pro and my new iMac.
Is there a way to install a previous working version? Or another solution?

I am having the same issue with my 1.83 mac mini and DVD player 5.0.3 - very annoying
(I use the mac mini exclusively for watching hulu, netflix, itunes, and DVDs)

Getting Ripped DVD Video and Audio Into Encore

Do you have previously authored DVDs that need rework? Do you want to add menus with greater impact and functionality? Do you want to add some additional program or supplemental material? Does a client want their product demo DVD to be updated to reflect the capabilities of the new and improved version, but the source files no longer exist? Using Adobe Encore DVD and a freeware utility called DVD Decrypter (DVDD), you can accomplish this quickly and easily.
Disclaimer: I do not support the illegal copying and/or distribution of copyrighted works. The authors and distributors of the software I use have made it clear that they do not support illegal copying. This guide is intended solely to assist you in ripping and copying DVD video to which you have the legal rights. Any use of this guide to infringe the copyright of someone else’s intellectual property is prohibited.
This guide is based on Adobe Encore DVD 1.5.1 and DVD Decrypter version 3.5.4.0. Let’s Begin!
Place the DVD to be ripped in your DVD drive and launch DVDD. If you have more than one drive (e.g., a DVD-ROM and a DVD burner) make sure the one with the disc is selected in the Source dropdown list in the main program window. Now we need to set up DVDD to extract video in a way that is “Encore friendly”. This is the toughest part of the whole exercise. Click on the Tools menu item and choose “Settings…”.
Settings
General Tab: You can leave these set at their defaults if you like. Personally, I specify a custom Default Destination. I put my ripped video assets all in one place anyway, and having a default destination means I have one less thing to do when I rip a DVD.
IFO Mode Tab: Make sure that “Select Main Movie PGC” and “Enable Stream Processing” are checked. “Uncheck Suspect Cells” is probably a good default safety check. If your hard disks are formatted as NTFS, set File Splitting to “None”. I leave “Copy IFO File” checked with the default sub-items checked. Make sure that “Patch M2V Timecode” is unchecked. The items in the Create Additional Files section are purely optional. The author of DVDD has been kind enough to list which programs need which files; notice that Encore DVD isn’t listed as needing any of these extra files. I do keep the “Stream Information” box checked. DVDD generates very informative file names, but I like to keep “Include PGC Number” under File Names checked. Be advised you will get some lengthy file names after DVDD is finished ripping.
Stream Processing Tab: Since we enabled stream processing in the IFO Mode tab, we need to tell DVDD how to process those streams. To save yourself time and confusion later, check the “Convert PCM to WAV” box. Earlier versions of Encore required a Demuxed audio stream and a Raw video stream. Encore 1.5.1 can accept either type of video stream (Raw or Demuxed) but it does still require a Demuxed audio stream. However, I still recommend using Raw video and Demuxed audio, if only because it seems to be somewhat faster to process in DVDD. This workflow is also backward-compatible with earlier versions of Encore.
So let’s set up the Stream Processing tab now. In the Demux box, enter “0x8? 0xA? 0xC?”. This ensures that all audio streams in the selected PGC, whether AC3, PCM or MPEG will be set to Demux. In the Raw box, enter “0xE0”. This ensures that the video from the selected PGC will be set to Raw.
Additional Notes about the Stream Processing Tab:
1. For those of you asking the question, “What the heck is a PGC?” it’s just DVD-speak for the titles in a DVD project. And I’m not talking about the opening or end credits, either; I’m talking about the titles that result, for example, from the timelines you create in an Encore DVD project. There is a subtle difference between a PGC and a VTS (title set), but that's not important right now.
2. Happily, recent versions of DVDD create a WAV file after ripping that will import directly into Encore. Versions prior to 3.2.0.0 would create a WAV file that had to be imported to, and exported from, a sound editing program like Adobe Audition, Goldwave or SoundForge before Encore would recognize it.
Events Tab: For convenience sake, I recommend setting “Set Program Mode” in the Startup section to “IFO”. That way, whenever you launch DVDD, it will look familiar to you. You may safely ignore all of the other tabs in the Settings dialog.
Ripping
1.Under the Input Tab of the main program window, select the PGC you want to rip. You can only do one at a time.
2.Switch to the Stream Processing Tab. Verify that Enable Stream Processing is checked.
3.Check or uncheck any or all of the video and audio streams that are listed. Highlight each one to verify that all audio streams are set to Demux and the video stream is set to Raw.
4.If you didn’t select Default Destination in the General Settings Tab, then you need to tell DVDD where to put the ripped files now.
5.Click on the big DVD-to-Disk icon.
6.DVDD will announce, quite loudly, when it has finished. At that point you can rename the files or import them as is into Encore.
I hope you find this guide useful and that it helps you get the most out of your investment in Adobe Encore DVD.
Guide © Jeff Bellune 2005

OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
1) Read video/audo files from a DVD that we created
2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

My Leopard install DVD is getting caught in a loop

I'm having a problem with my Leopard install DVD. I'm running Leopard 10.5.7, and I wanted to use Disk Utility, so I inserted the intall DVD, double clicked the icon, and pressed enter to restart using the disk.
What happened next was the computer restarted, gave me the chime, went to a gray screen with no apple logo or spinning gear, then restarted and looped this same sequence repeatedly. I've checked the surface of the install DVD and it seems undamaged, so my only conclusion is that something software related is happening. Anyone else run into this?
The install DVD is version 10.5.1.

Okay, so I used Disk Utility on the internal drive to verify and then repair permissions (long list). Then I attempted to verify the disk and got a message saying Disk First Aid Failed and the following info in the history: Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 956726 instead of 956732)
Invalid volume directory count
(It should be 233009 instead of 233003)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed.
After that, I put the install disk in and restarted holding the shift key. Got the gray screen for a long time (DVD seemed to be doing something), and then the computer restarted. This time I held down the option key, got the Startup Manager and selected the install disk. And away we went with the gray screen loop again. I let it try to restart from the install disk 6 times before holding down the eject button and ejecting the install disk which allowed the 'puter to boot from from the internal drive.
And that's where I stand.

NEW Satellite A505 - Blu-ray won't play on WinDVD or Toshiba DVD player

I purchased a Satellite A505 (Windows 7) with a Blu-ray disc player that was pre-loaded with WinDVD, Toshiba DVD player, and one other player (?) - all this software was added 12/21/2009 (by the manufacturer). When I put in a Blu-ray disc WinDVD stops responding and I have to start the task manager to "end task." The Toshiba player says "media not supported." I used the recommended compatibility settings (Windows XP) and it says "incompatible application." I tried using a Sony Vaio w/ Blu-ray and had no problems with the same disc using WinDVD. I don't know what's wrong (and I'm not super tech savvy) - my settings, my drivers, my hardware... ???
I also downloaded the free trial of Corel's WinDVD 2010 and it wouldn't play on that either...
*Note - my model number is A505-S6012 but I can't find this as an existing model on any of the Toshiba sites. It was delivered to the store around 1/4/10, so it's brand new. The A505-S6990 has most of the same features though.

jacuielaura,
I had the exact same issue with the Win DVD BD that was preloaded on my A505-S6014 when I purchased it. I myself also downloaded the Win DVD 2010 free trial and it did not work. Reason being is that they are only allowing people to trial the DVD version of Win DVD 2010 and not the Win DVD BD 2010. I also tried Cyberlink's PowerDVD and it worked but it digitized terribly. So I uninstalled both trials and went to support.toshiba.com and found what I needed to fix it.
I recommend you uninstall the original Win DVD BD version you have and any trial editions you downloaded and follow what I have listed below to fix your problem.
This is only a recommendation. Uninstall and install software at your own risk. If this fix doesn't work for you then you will have to call Toshiba and request a disc to reinstall your original software you uninstalled.
This is how I fixed mine:
Go to Support > Download > then choose your category (Laptop) then your Family (Satellite) then you're model #(A505-6012). Or you can just enter S6012 in the search box and it should bring up a list of all Laptop models with S6012 in them. Choose yours and click Go.
Now from the two drop down lists choose which Operating system: (Windows 7 64 bit) should be what you have, then choose Blu-Ray in the 2nd drop down list.
Download and SAVE these files to your desktop or My Downloads folder so you do not have to search for them again after you reboot.
You should now see this listed:
WinDVD BD for Toshiba for Windows 7 (32/64)(v8.0; 11-05-2009; 176.1M)
Also you will need to download the (Intel Management Engine Interface driver) which is listed in the drop down list under Utility (2nd page):
Intel Management Engine Interface for Windows XP/7 (32/64)(v6.0.0.1184; 10-08-2009; 6.39M)
Reboot after each installation even if it doesnt tell you to.
After both downloads have been installed and the OS is completely loaded again, insert a Blu-Ray disc and hopefully it should automatically play.
P.S. When playing Blu-Ray's I turn my power management to Performance. This may also help.
Good luck!
Hailofaguy

HP MediaSmart DVD software and major Blu-ray issues

In September 2010, I bought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. From September 2010 to October 2014, I successfully played regular DVDs and CDs. But in October 2014, for the first time, I needed to view a Blu-ray DVD. Specifically, I needed to view the "Divergent" Blu-ray.
When I tried to play the "Divergent" Blu-ray (which was made in 2014), the HP MediaSmart DVD software (version 3.1.1.3317) and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
Next, I downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html. This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work.
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not even detect the Blu-ray.
Recently, I decided to revisit this issue. I installed the most advanced version of HP MediaSmart DVD. I installed HP TouchSmart DVD, version 4.1.2.5122.
TouchSmart flawlessly played disk 1 of the 2-disk "Star Trek" Blu-ray set (made in 2009). However, TouchSmart was not able to play the "Divergent" Blu-ray at all. After failing to play the "Divergent" Blu-ray, TouchSmart attempted to play disk 2 of the "Star Trek" Blu-ray set. TouchSmart played disk 2 with poor video.
Next, for some strange reason, TouchSmart became totally inaccessible. I could not start TouchSmart. I rebooted the computer. TouchSmart was then able to play the "Divergent" regular DVD, but was unable to play the "Star Trek" Blu-rays at all.
I did a system restore to the point just after the installation of TouchSmart. TouchSmart played regular DVDs well, but still could not play the "Star Trek" Blu-rays at all.
Next, I got rid of TouchSmart and installed HP MediaSmart DVD, version 4.1.4229 (sp49489.exe). MediaSmart 4.1.4229 flawlessly played the "Speed" Blu-ray (made in 2006). However, MediaSmart 4.1.4229 failed to play either of the "Star Trek" Blu-rays. And after failing to play the "Star Trek" Blu-rays, MediaSmart 4.1.4229 played "Speed" with poor video.
So, it appears that any specific version of HP MediaSmart DVD software will play old Blu-rays successfully, and will then subsequently fail to play more advanced, more recent Blu-rays. After that version fails to play the more advanced Blu-rays, that version will play the old Blu-rays, not as flawlessly as before, but rather with poor video quality or not at all.
I have read many threads on the HP forums and on other forums about people having trouble playing Blu-ray DVDs on a wide variety of HP computers. I went back to the specifications of my HP computer, and I found the following disclaimer about that computer's Blu-ray capabilities:
As Blu-Ray is a new format containing new technologies, certain disc, digital connection, compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played on this Desktop PC. Some HD DVD and Blu-ray advanced features may not be supported. CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is recommended that you close all other applications before and during HD DVD and Blu-ray playback. HD DVD and Blu-ray movies will only play through the HD DVD and Blu-ray player software. Advanced Access Content System (AACS) keys are integrated into your PC for copy protection purposes. Occasional renewal of the AACS key is required, and easily done by connecting to the internet.
I believe that I have gone way above and beyond ordinary diligence, to try to get my computer to play Blu-ray DVDs. The disclaimer states that certain issues may arise and that flawless Blu-ray playback is not guaranteed for all systems. But certainly my frustrating experiences, and the frustrating experiences of others, go way beyond the leeway given by HP's disclaimer, do they not? Has anyone thought about the possibility of a class-action lawsuit against HP?

In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider:   Microsoft
Driver Date:           6/21/2006
Driver Version:     6.1.7601.17514
Digital Signer:      Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files:      C:\Windows\system32\DRIVERS\cdrom.sys
Provider:           Microsoft Corporation
File version:    6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:       Microsoft Corporation. All Rights Reserved.
Digital Signer:   Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware?

Power mac g5 will not boot to dvd at all any ideas?

Power mac g5 2.3 late 2005. Leopard 10.5 installed on drive and boots ok to hhd.
how ever i need to go back to tiger 10.4.4 or later for my music hardware to work correctly..
Sooo i purchased a Tiger 10.4 black retail disk and it will not boot to it in any way all I end up with is a kernal report screen.
I have tried everything.. taking the drive out. adding a new formatted drive to install to.. no joy..just does not even look to be installing nothing..not even a spinning wheel thingy . if the disk was too early eg before late 2005 would it act like that and not install?
I'm lost here lol.

Hmmm, something else is going on I guess...
The dvd is black with the X on it and has this number on it - 2Z691-5305-A
Apple Mac OS X 10.4 Tiger (Full Install) DVD Retail Version
Item #:
MA453Z/A 1005166
Compatible with eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD).
Also...
Mac OS X Tiger 10.4 Drop-in Install Hardware Bundle (CDVersion)
Item #:
2Z691-5306-A 1002481
Compatible with eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch
MA453Z/A  Disc 1 - 2Z691-5306-A  Disc 2 - 2Z691-5307-A  Disc 3 - 2Z691-5308-A  Disc 4 - 2Z691-5420-A  Disc 5 - 691-5145-A, Ver 2.0   The iwork cd is 603-6242.
http://www.welovemacs.com/2z6915306a.html

After a clean install of the original OS 10.6.4 on my old MacBook Pro, I'm not able to install iLife with the application DVD. Anybody can help?

My old MacBook Pro 13" 2011 (2.4 Ghz, Intel core duo, 10Gb RAM, 250Mb HD) was running on Lion 10.7 (upgraded last Spring from the original Snow Leopard). As I got a new laptop just a week ago, I was trying to restore the old one to the original factory settings and resell it.
After unsuccessfully trying to restore Lion with the remote apple server and after going through several messages here in the community, I was finally able to re install the original Snow Leopard system from the Mac Os X install DVD that came with the computer. I did that booting the laptop from the DVD, going to disc Utility, making the partition GUID formatted Mac Os Journal extended, and then installing the system. The hard drive had been erased previously.
It all seemed to work well; I had intended to shut down and leave the option to the future owner to configure the computer and perform the additional installs. But to double check that everything was ok, I decided to go ahead instead, and install the applications that were on a separate DVD (AHT Version 3A192, Disc Version 2.0), like iPhoto, iMovie, iDVD, etc. Unfortunately, as soon as the installer would begin to work, after clicking on the agreement and all the preliminary steps, it would quit with an error. I tried several times.
Does anybody have a clue of what happened and how I can fix it? I hope you can help me! Thank you!

Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support

Upgrade HDD using Time Machine, but no Snow Leopard DVD, only Leopard installation DVD = kernel error on startup

Hi guys and girls.
Background
I have a MacBook Pro (March 2009 vintage). It was loaded with OS X Leopard on a 250GB HDD. When Snow Leopard was released, I upgraded using a DVD bought from Apple. In time, I added an external USB HDD to use for Time Machine Backups. I am now, however, knocking up against the capacity limit of the original hard drive.
Given the above, plus the fact that I no longer appear to have the Snow Leopard DVD (upgrade version I believe) - what is the recommended way to get back to my old setup (files, OS, settings etc), but with my new, larger HDD?
So far I have tried:
1. Formatting new HDD as Mac OS Extended (journaled), GUID partition having booted using my original (Leopard) installation DVD. I then selected the latest Time Machine (Snow Leopard) backup. After a couple of hours of restoring from that backup, the system restarted, but had kernel errors on bootup.
2. As above, but when formatting, chose to zero all data. This had the same end result.
Questions:
1. Are the kernel errors I'm experiencing due to the mismatch of booting off Leopard and restoring a Snow Leopard backup?
2. Would finding my (or even a) Snow Leopard upgrade DVD help? If so, how?
3. What am I doing wrong generally? I do like to try to understand these things!
4. As above, what is the recommended way of doing what I'm trying to do, given the limitations of release DVDs etc.
Many thanks

Simplest thing would be to buy the retail SL installation disc ($20 USD) and use it to do the migration. There might be an issue trying to use a SL TM version with Leopard.

DVD SP Version 2

Similar Messages

Maybe you are looking for