DVD SP Video time problem

I am trying to put an hour long video into DVD SP with subtitles. Now the subtitles match up the video outside of DVD SP perfectly, but I've come to notice that DVD SP sped up the video when I put it in by about 3 seconds. Inside DVD SP the end time shows 57:45 while in quick time it's 57:49. This is un-noticable typically, but the subtitles don't match up now. Can anybody give me ideas how I can fix this or lead me to somewhere that can. Thank you.

Hi Mark,
The anomoly does seem to be great enough to be a drop frame issue. How are you importing the subtitles stl, son etc.
Cheers

Similar Messages

One Step DVD Capture Video TIme

I've just recently run into a problem with One Step DVD and would like to know if anyone else has had the same issue. I normally don't use One Step DVD but my father uses it because it requires little if any computer skills when it comes to iMovie or iDVD.
He recently came to me with a problem that has cropped up with the One Step option. When he goes to use it the the very first step in the process is capturing the Video from the camera. The camera rewinds the tape as is the norm and then the computer starts to capture the video with no problem. The problem is with the capture time/available time that shows up on the screen. For some reason the available time consistantly shows approximately nine minutes when it is a full hour long tape. I've tried finding if there is some setting that is throwing it off in the preferences and can't seem to find anything related to it. I've also tried dumping the preferences with no result. I've also tried a number of different video tapes with no change. Recently I took it home and tried it on my system where it gave me a available capture time of 17 minutes even though there is an hour of footage. Today I took MY video camera up to my folks house and hooked it up and gave it a shot and of course it gave me an available capture time of 9 minutes. So I'm at a loss here folks. Any help would be appreciated. I personally think it's the prog but I'm open to suggestions. Below are the cameras and systems I have tried this on. Remember I've tried both cameras with each computer with the result of the available capture time not matching the amount of footage on the tape.
My Father's setup
Mac Mini 1.6 Ghz
1.6 Gb Ram
OS 10.4.8
Video Camera: Canon ZR45
My Setup
Dual 2.0 Ghz PowerMac G5
2.5 Gb ram
OS 10.4.8
Video Camera: Sony TRV315

Hi Wayne,
I honestly have no explanation why iDVD / OneStep is showing only 17 mins. left of capture unless you don't have enough available HD space to capture to.
3 suggestions only:
1. Make certain you have plenty of available HD space for this process. I recommend no less than 20GB of available HD space for each hour of video.
2. Before launching iDVD/OneStep, drag and drop the plist for iDVD to the trash. Looks like this:
com.apple.iDVD.plist
3. After trashing the plist for iDVD, connect your mindv camcorder via firewire and relaunch iDVD while the camera is powered on. In most cases, iLife apps will default to the correct settings on its own (provided your mac sees the connection under system profiler).
Good luck & hope this helps
SDMacuser

Problem with Video Time Line in CC

I have encountered a problem with the video time line panel in CC.
When importing a clip, the time line panel remains on top of the video image window.
As before, the image window does not automatically resize to float above the time line panel.
I cannot resize the clip image panel to make more room for the time line.
I have tried to reset Photo Shop to the original state without success.

Are you using a docked workspace? What zoom? Is hardware acceleration working properly? What system? What footage? Screenshots? Much more info is required...
Mylenium

Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
3. upgraded from 1.9 to 2.0 BIOS. still the same problem
4. reverted from 2.0 to 1.7 BIOS. the problem ended.
BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card. That was the last step (before chucking this mobo completely) in my attempts to fix the same problem. It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work. Would boot sometimes and at others gave a blue screen video error.
Flashing to bios 1.7 was the only thing that fixed it. Tried different memory, updating software, various combinations of drives, etc. For the record I tried bios 1.8, 1.9, 2.0, and 2.1. Not sure what about those updates causes problems but there definitely is something wrong.
Thanks.

Burn DVD from video

Somewhat a rookie so go easy on me. I produce a 30 minute TV show in Final Cut Express. I print to video for my media that I give the TV station. I'm often asked to present one of my episodes to a club, etc. A DVD is most convenient for this. I've never had luck printing a good DVD from FCE...I'm sure it's my technique. So, I got the smart idea of using my edited and finished video that I would send to the TV station and use iDVD OneStep (iLife 09) to produce a DVD. Everything seemed to go fine until I put my new DVD in a DVD player...no sound. The image quality is very good and very happy with that...but no sound. What have I done wrong or is iDVD simply not made for this purpose?

Hi
There is a lot to this. Some basic.
DVD - is a standard in it self - CAN only do SD-Video (as old CRT-TVs at it's best)
Neither iDVD, Roxio Toast™ or DVD-Studio Pro - can do anything better.
(Roxio Toast 10 (11) Pro incl BD-component - Can burn to Blu-Ray and even small movies
as this on Standard DVDs - BUT they NEED a Blu-Ray Player to be viewed)
*DVD quality*
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov *(not selfcontaining, no conversion)*
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x4 (x1) (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Macbook + mini-DVI to video adapter problems!

Hi,
My roommate and I both have Macbooks - I got mine in June '06, it's one of the older black 80 gb models and hers is a white 120 gb that she got in August '07. We bought a mini-DVI to video adapter so we could watch DVDs and video files on our TV, but have been having some trouble with it lately. At first, it worked perfectly with her computer, but in the past few weeks has been malfunctioning - when she plugs it in, the default background shows up on the TV screen but nothing else, any windows she has open only show up on the TV if she drags them to the right on her screen until she can't see them on her computer anymore, so we're unable to watch anything fullscreen. Any tips on how to fix this?
Also, the adapter has never worked with my computer - any time I plug mine in, my computer display becomes enlarged and slightly distorted, and on the TV screen is distorted by horizontal lines that move up and down the screen. Any ideas here?
Thanks so much for the help!

Hi cbeth,
welcome to macbook forum.
For your friend macbook, try to press F7 back and forth to switch between mirror and expanded mode.
Try to update your macbook hardware firmware and software using software updater and repair permission after that...application/utilities/disk utility/repair permission.
Also reset your PRAM and PMU.
Open your friend system preference / display and try to compare and set yours similar to hers, including resolution, color depth, refresh rate.
Good Luck.

Encore can't burn more than one DVD at a time: Sense Code 56400

For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD
I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on everything accept my hard drive which is 7.0 out of 7.9 according to my Windows 7 Pro. 64 bit system.
I have 2 different DVD burners, one is a blu-ray burner too. I have the same issues, only different error readings it seems, on both drives. The first drive didn't burn even one for some reason so I tried the second. The second drive would burned 3 and on the fourth I got the errors' which I've included screen shots of below. I was surprised I got through three before I got to this error. By the end of the week I have a large project I need to make 30 DVD's of. HELP!!!!!
A long time ago on my older machine I had similar problems and I went through different drives and discs until I seemed to come up with the magic combination which seemed to be a Plextor burner and Verbatim. But, then i got a bad batch of verbatim and tried Maxell and used those successfully for a while. Right now I'm using what a friend gave me, TDK's. I'm wondering if that's what the problem is... HELP!!!!

I have managed to get it to work consistently now. I just burned 20 DVD's without a problem.
I tried everything you suggested except the imageburn software. I didn't like that site, I was too anxious to try and figure out where to download that software in the midst of all the advertisements on that site.
After clearing out everything in startup and services except what I needed I still wasn't able to burn successfully. Finally I went and purchased some Verbatim DVD-R discs and wahlah! Actually, after the first try with the verbatim I had an error code when trying to burn with Encore. So, I created and image file as you suggested and then I used Cyberlink's Power2Go to burn the image file and from there on it seems everything is solid.
I think the biggest problem was using TDK discs. I came to the realization a few years ago that certain disks are not as predictable as others and that verbatim and maxell seem to be the best. I did get one bad batch of verbatim though one time and that's when I switched to Maxell. My friend gave me 200 of the TDK's and I've been having problems ever since. But, I wasn't sure what it was exactly because he gave me those around the same time I rebuilt my system.
I had also found the Plextor seems to be the best bet for burners. But, I had been using an HP one lately and thought maybe that was the problem. However, now it seems to be fine.
I really don't know what fixed it. I mean, nothing definitely worked until I started using the Verbatim today. But, that first verbatim erroring perplexed me. I had done some other things too, like removed some programs, like a bunch of HP printer crap. I even removed my virus software, Window Security Essentials. I just reinstalled it so now I'm wondering if I can burn as consistently. I had seen somewhere where someone said they removed Windows' Defender to get theirs working.
Anyways, I guess what I need to do is format my main hard drive, only put adobe stuff on it, and then take my old computer set it up for everything else. That'll probably be the best thing to do... If I have anymore problems like this I'm doing that right away!

MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

I find the following information that I collected very interesting at the very least...
Here goes...
The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
Here is how I tested.
Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
Logitech iFeel Optical Mouse, USB= failed.
Microsoft Cordless Ball Mouse, PS/2= failed.
Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
Anyways I figure out it was the mouse, and not the memory.
Obviously MSI needs to make a patch for this mouse problem.
I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
MSI, get to work on a new BIOS to fix this mess!!! :]
BioHaz

Quote
Originally posted by Raven_
hi
its possible to use an ps/2 mouse AND a usb mouse at the same time.
i used the ps/2 mouse in windows and the usb mouse when playing games.
you can get some trouble if you do it the way i did it.
i was in windows surfing and the pointer just jumped all over the screen.
when i looked on the other side under a table a friends little kid played with the usn mouse. )
bye
LOL, that isn't what I'm talking about.
There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
BioHaz

MacBook Pro 15" video card problems (i think)

Can anyone tell me if this is indeed a video card problem?
MBP 15" info (Dec. 2011)
Processor 2.4 GHz Intel Core i7
Memory 4GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
OS X Lion 10.7.5
This is what happened:
I use my mbp heavily because I edit a lot of videos with Premiere. I also use lightroom / photoshop alot + games. I also installed Parallels desktop late 2013. I don't know if that is relevant but anyway. Everything started late 2013 (a little after installing parallels actually) when there are moments when the audio wouldn't work and I couldn't adjust the volume. It would come back anyway so i didn't mind it. Then the fans were on high speed for little activity. After that the keyboard backlight couldn't be adjusted and wouldnt work. I ignored all of these cuz i wasn't troubling me at the time. In January i left for france to study - I use bike all the time and once stupidly placed my laptop on the basket going to school (rough roads). I had a class with html so I had to open Parallels, my teacher pointed out the fans and how loud they were. That day, parallels desktop said i must upgrade to windows 9 or it will restart every 2hours. I didn't of course. I didn't have time to.
After that (a few days later i think) my laptop would randomly turn into a black screen but it's still on (the power LED is on) I tried turning it off by pressing down the power button and then turning it back on. It worked the first time. During the first week, the frequency of it happening grew. It would do it almost 3 times a day. during that same week I tried to do an SMC reset. It fixed the keyboard light, fans and audio but not the black screen thing. It just keeps on happening around 1-3 times a day. It only happens when I'm using it btw, never when I just leave it. ALSO, after a few days, it would take longer hours to open my mbp again. I mean, the screen would turn black. i would turn it off, then on again. I will ONLY hear the hard drive moving but no startup sound and no grey screen and apple logo. nothing.
The following weeks after that, I asked a friend to help me out. He suggested that I install gfxCardStatus because he said it might be my video card. He instructed that I keep it on intergrated only. So I installed that and did what he said I thought it worked for a while because the black screens stopped happening (even when gfx keeps on going back to dynamic) BUT NOW, MY LAPTOP WOULD FREEZE (not turn black). I'd shut it down using the power button but it still takes me hours to open it again. Sometimes, I'd wait for the battery to drain because it would startup when i charge it (sometimes)
I tried doing AHT as well to confirm the video card problem, but the results are no problems found. I really don't want to replace my logicboard here in france. everything is more expensive here. ;__;
Today I uninstalled parallels to see if that might have had anything to do with my problem now but i think that's just wishful thinking.
Can somebody tell me if this is really about the video card? Thank you

Your appointment at the genius Bar in an Apple Store (anywhere in the world) for an evaluation is FREE, in warranty or out. Those guys put their hands on these Macs all day every day, and they are especially good at Physical and Power problems.
Ask them.

I have a mid 2010 macbook pro laptop can i play a region 2 NTSC format dvd on it without problems?

as said in the titel any help would be very helpful thanks

It would have been useful to know what region you are in!
DVD Player: About DVD-Video Regions
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set he region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Video import problem from iphone5 to PC giving error

Hi evereyone,
I have iphone 5. I try to import my videos but am not able to import all, its giving error. I tried also using windows live photo still same prob. the imported videos have problem in playing. I tried with vlc, quick time, the frames are broken and audio video lag. Please help me how i can import all and rum smoothly.

Ilan_B wrote:
Every time I plug my iphone 5 into the laptop (using windows 7) the easiest way is to right click on the portable device (iphone icon) and import to my pictures, BUT every time I do this it wants to import ALL photos and videos.
And when you do this, it should ask if you want to import the pictures that have already been imported. Select No.
Then, after you import, the photos should be deleted from the Camera Roll.
After the photos are imported and deleted from the Camera Roll, you can import using iTunes, only the photos you want on the iPhone.

Share : how to convert dvd and video to zune

Share : how to convert dvd and video to zune
Download this software at Share : how to convert dvd and video to zune
1. Free download　Zune Video Converter + DVD to Zune Suite install and launch.
2. Click DVD to Zune Converter component, load your DVD by clicking 'Open DVD' button or choosing 'Open DVD' from 'File' drop down menu, choose the DVD ROM in your PC, it will take you to the DVD menu in the player screen.
3. Click the "Setting" and go to menu "Subtitle", Set Subtitle to what you like.
4. Click the "Setting" and go to menu "Audio Track", Set audiotrack to what you like. To 'Output Folder', Enter the full pathname or choose the path where you want to save your video files by clicking 'Output folder'. The default output format is WMV, which natively supported by Zune. You can also hit "Setting -> Output settings", select other output formats you like (MP4, H.264, WMV7/8/9, MP3, WMA, etc.)
5. The converter will automaticly detect the main movie of your DVDs, it will popup with below window to let you make a decision, just keep the setting of "Record from movie start point" and output file size setting, the default setting is the best for good quality and compact output file size, click "Yes" to start ripping DVD to Zune video files.
Tips: You can also just record any part of movie by drag the slide bar to where you want to start, and click the "Convert" button, please select "Record from current time point". This provide you with more flexibility.
6. Find the .wmv or .mp4 file that DVD to Zune converter created and add it into your Zune software library.
7. Load the .mp4 or .wmv files to Zune by clicking 'Sync contenct to and from your Zune'. Done!
Share : how to convert dvd and video to zune

Unfortunately discussing this subject is not permitted on Apple's forums as the recently updated Apple Discussions User Agreement now clearly states.
Under item 2, para 8.2 it says "Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store."

What can I do if I have changed my DVD regions 5 times but want to change it again

I have changed my DVD regions 5 times but want to change it again. How can I get back to my own region which is 2?

Prof.Walker wrote:
I have changed my DVD regions 5 times but want to change it again. How can I get back to my own region which is 2?
Sorry, not possible.
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
It may be possible to make your Matshita Superdrive region-free by the methods describe here:
http://forum.rpc1.org/viewtopic.php?t=43082
but please note: you USE THE SOFTWARE AT YOUR OWN RISK!!!. The operation isn't officially allowed or sanctioned, which you're supposed to know when you do it.
To make any free=standing DVD player region free, go here:
http://www.dvd.reviewer.co.uk/info/multiregion/
In the meantime you can use VLC to play DVDs from any region.

Video playback problem with no answers

I'm having a small issue with my Front row. When I insert a DVD and play it using the OS X DVD player it works fine.
When I switch to Front Row and try to play the DVD, the video stutters every few seconds. I have the latest Front Row installed, and I do not have an Intel Imac. I have a 20" G5 Imac with the PowerPC processor and 1.5 gigs of RAM. Any ideas on what could cause this issue in Front row and not the DVD player? Any help would be great!

Any DVD or video file of any type. They play just fine in Quicktime, DVD player, or even Media Central.
I've got all the latest updates, and have reinstalled the OS several times. I know this happened to intel Imac G5's but I have a PowerPC G5 with isight. Can't seem to find much on my issue.

DVD SP Video time problem

Similar Messages

Maybe you are looking for