DVD stalls or hesitates on playback on external DVD players

When I play a DVD created in iDVD on DVD players (tried three) it stalls for about 5 seconds in two different places. When I play it on my computer it plays perfectly.The movies on this DVD were created in iMovie. When I play them in Quicktime player they perform perfectly.
What could be causing this?

Thank you J. and all for the great advice on DVD writing.
I have again rendered the two movies that stall in one place for 2 or 3 seconds. (Five others previously processed without error.)
I then burned the I-DVD file at 2x on single-sided Verbatim DVD-R media.
I then played the DVD on a number of different players. Some played through without error. Other DVD players still had the stalling problem for a couple of seconds.
Since I will be publishing this DVD, with no control over the player people will use, I need to clear up this problem. I have gone back repeatedly to my source file and find no errors there. I will pursue this problem further with the Boinx, the creators of FotoMagico which I am using to author the videos. Perhaps they will know of others who encountered similar problems.
Thanks all again for your helpful input.
Len Sroka

Similar Messages

  • Unable to run pse 13 dvd on surface pro while connecting through external dvd drive

    Hello, I purchased pse13 DVD and a portable DVD drive to install this software on surface pro having windows 8.1 but this DVD is not detected on surface. Is there a way I can install this software on my surface?

    You'll have to figure out why the surface isn't showing the DVD drive. For that you'll have to contact Microsoft or the DVD manufacturer to see if the drive is compatible with your Surface.

  • How do I prevent snags when buring my DVD with a soundtrack for playback on a DVD player?  It only plays clearly on the computer itself.

    I totally get how to create a DVD with a great soundtrack on my computer.  I put the whole thing together and when I play it back in preview, it plays beautifully.  However, when I select "burn" and burn it do a disk and then go to play it on my DVD player hooked up to my TV, there are rough spots---times when the sound goes out and then comes back on, etc.  
    Someone wrote me and said to choose "save to disk" first and then use disk utility or Toast to burn it at a slow speed.  I tried doing this and when I selected "burn to disk" it only came up as an audio file and a separate video file, so I was lost at that point. 
    Any ideas of why this discrepancy might be happening?  I'd appreciate any of your thoughts!
    Thanks!
    Rick

    okay, I can help you a little bit. your dvd player (standalone) plays mpeg-2, I think, so
    in order for a disk to work in it, both the audio and video have to be combined into a whole package, which i think is video_ts.Using Toast, choose video, then dvd-video then drag n' drop, and it may work. As far as  i know, disk utility cannot make video dvd's, but  I may be wrong, and you may be right. I used iDVD, but there are probably other programs that may do as good a job of burning. Oh, and this is most important: Some blanks will work ok, and others won't. Verbatim, maxell ( I think) and Taiyo Yuden will work fine. the other ones are a gamble. I think what it's supposed to do is called muxing. I'm sure someone will correct me on this. You could try using "Burn" which is relatively cheap or Handbrake and see if that will do what you want to do. not that it's super important, but the amount of Ram in your machine is helpful too
    anyways, good luck
    John b

  • How do I burn a DVD on my new iMac to play on external DVD player

    I have a new iMac at work (3.5 GHz Intel Core i7), running on OS X Yosemite, and I'm trying to figure out how to burn a DVD that can be played on an external DVD player. I have a disc burner connected, but just noticed that iDVD (the way I used to burn video files) is no longer part of my installed applications.
    Thanks for any help.
    JC

    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Softwareor eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    If you're creating a slideshow in iPhoto and want to add it to an iDVD project export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Apple dvd player / external dvd drive issue

    i recently bought a LaCie d2 external dvd drive, since my desktop g4 only has an internal cdr drive. I am running osx 10.4.3, which i installed through this dvd drive. yet now, when i put a DVD movie into the drive and try to open Apple DVD Player, it says
    "There was an initialization error. A valid DVD drive could not be found. [-70012]"
    i know this is a third party drive, but can anyone help me out? pleeeease?

    This is to be expected. DVD Player will only work
    with an external DVD drive if the Mac has an internal
    DVD drive.
    However you may overcome this limitation using PlayerPatc
    h.
    I had the same problem as above (error code [-70012])... I downloaded this patch for my LG external DVD/RW Model GSA-2166D and it worked perfectly... can now play DVDs...
    It's people like you who make being part of the mac community a joy!
    Now I just need to find a patch to get the Light Scribe to work...
    Thanks!
    A1005   Mac OS X (10.3.9)   M8758LL/A

  • Need to get an external DVD player for Imac, which one?

    Hey (again),
    I've had a terrible time getting my imac up and running properly since I got it back from its HD replacement yesterday.
    It's gotten to the point where I'm going to wipe the system and then do a time machine reinstall.
    My problem is that my imacs dvd player doesn't play DVD's anymore, it just spits out the install DVD. Could I use any cheap external DVD (usb) drive and wipe and install my OS from there or does it need to be in the internal one? I found a couple of really cheap ones that I'm wondering would do the trick or does it need to be a specific brand?
    Or do I need to have my imac which is out of warranty serviced and have the original dvd player replaced?
    Any input on this is greatly appreciated.

    In my experience just about any external DVD drive works. I've found them way cheaper at a big technology store like "Fry's".

  • Macbook pro cant boot from external dvd device please help !!!!

    hello everyone please help me i have macbook pro 2011 core i5 version
    i just installed 2.5 ssd as second hdd
    i cant boot from external dvd device to install any os  the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
    it shows the device when a boot into mac parition  
    i am trying to install windows on origianl 500 gb hdd and linux on ssd
    but not luck
    the external dvd drive works i pluged into my pc and it works
    please help thansk in advance
    200 gb mac
    300 gb windows
    120 ssd linux

    I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP.  Use startup manager:
    https://support.apple.com/en-us/ht1310
    Ciao.

  • External DVD burner to burn iDVD projects

    I purchased an iMac about six months ago to replace an older Mac that I've had for about 10 years. I made the mistake of not getting a Super Drive when I made the purchase. I have spent some time learning about and creating iDVD projects but, of course, can only play them on my iMac and am unable to burn them to a DVD disk. Can I purchase an external DVD burner that will allow me burn my iDVD projects and, if so, can anyone suggest a reliable product?
    Thanks.

    Use an ext. Lacie FW Burner or make your own like i did from a pioneer 110D and a standard FW400 enclosure. Pioneer 111 and 112 will also work. Nice thing about making you own is that it requires no additional FW drivers.
    http://discussions.apple.com/thread.jspa?messageID=5153595&#5153595
    http://discussions.apple.com/message.jspa?messageID=5177208#5177208

  • Advice about an external DVD drive

    Hi there,
    Pardon the basic questions, a computer genius I am not.
    I have a rather elderly iMac G4 running 10.4.11 and it has never been able to even see DVDs. I am facing necessary software upgrades which come in a DVD format. Is an external DVD drive what I get? Will my poor iMac see a DVD coming from an external drive? I have always found it annoying that I have the DVD player software but I can't use it.
    Note: if a solution contains advice about replacing my hard drive, please know that particular drama happened this summer when the original hard drive died. After much angst, my iMac is working well; I just need to be able to load software in a DVD format.
    thank you!
    suzy

    Yes an external DVD optical drive will work. The cost needs to be considered, is it worth it.
    You could opt to go the cheapest way possible; search Ebay on the PC side(since a high % are not as overall savvy as Mac users) look for the older Sony CDR burners, these were blue external enclosures which housed CDR burners. You can purchase modern DVDR player/burners cheaply now a days and install the optical drive into one of those Sony enclosures. The reason I suggest Sony is way back when they were expensive but well made and work to this day all the way to Leopard. You should be able to pick one up for $25.00 plus a good optical drive for less than $50.00
    BTW "necessary software upgrades" if you don't mind what are the upgrades and why only on DVD media? There are other ways to skin this cat.

  • Ibook g3 M2453 boot from external DVD drive

    Hi, I'm Simon from Germany.
    I have an iBook M2453 Mac OS X and a lot of dvds.
    But the iBook has no DVD drive. So I bought an external DVD drive. But no matter what I do during boot (press the C key or alt)
    I can not boot from external DVD drive.
    Please help me
    Thank you.
    Simon.
    PS: I have translated the text using Google translate

    Hi Simon,
    the iBook is able to boot from USB, but this is not expected behaviour and not supported by Apple.
    http://support.apple.com/kb/TA20554
    There are some external enclosures that do the trick.
    But only when you press ALT after Power on. (Select a startup volume via the Startup Manager)
    External enclosures with Prolific PL-3507 chipset (Firewire/USB Combo)
    You will find them on Ebay Germany
    I have a Delock IDE>USB 2.0 enclosure for 2,5" HDs
    http://www.delock.com/produkte/gruppen/Geh%C3%A4use/Delock_25_external_enclosure _USB20_42365.html?setLanguage=EN
    that works also.
    Hallo Simon,
    das läuft nur mit einigen wenigen externen Gehäusen. Such auf Ebay nach "PL-3507"
    und nimm eins mit Firewire und USB Anschlüssen.
    Ein Festplattengehäuse von Delock für 2,5" Festplatten ging auch ( Link oben)
    Ein Boot ist nur möglich wenn du die ALT Taste nach dem Einschalten drückst und dann über den Startup manager dein Boot volume auswählst.

  • Installation from external DVD drive

    I have an older Powermac G4 that had a DVD-RAM drive and I replaced it with a high-speed Toshiba CD-RW drive. Is there a way to install Tiger from the DVD via an external drive or do I have to buy the CD's?

    Assuming this Mac has a Firewire Port or Ports and you have an external Firewire DVD drive and your Mac and the external DVD drive supports booting the computer from the external DVD drive, the answer is yes.
    If not, you need to use Apple's Media Exchange Program and exchange the Tiger DVD media for CD media or if you have access to another Mac with a DVD drive and both Macs support Firewire Target Disk mode, you can connect the two Macs via Firewire Target Disk mode and install Tiger on your PowerMac G4 from the Mac with a DVD drive.

  • Installing from External DVD Drive

    Can you install Leopard from an external DVD drive (USB)? I bought an external DVD drive and it has a faster speed then the built in DVD Drive in my iMac.
    Thanks,
    agent6998

    I wanted to try this out and used my 10GB 3G ipod to install, and it actually went pretty fast. It took me ~45 minutes to install from boot to boot (not counting post-boot blue screen that took ~10 minutes or so, and then final setup tunings/customizations, etc.). The time saved equaled the time it took to copy the DVD to disk image, root around and find my old ipod, and restore the image to the ipod, so its not that much more efficient. Additionally, its an unsupported method of installing, so if something goes wrong dont blame Apple.

  • DVD Studio Pro 4 USE WITH EXTERNAL DVD BURNER??

    Hello
    Looking at buying DVD Studio Pro 4 for my mini but apple have just stated it will not install unless my machine has a superdrive. We've got an external firewire DVD burner and i've read mention of other versions of DVD Studio burning through externals so how come we carnt use DVD Studio Pro 4 with an external DVD burner?
    Has anyone tried an external DVD burner with DVD Studio Pro 4 ?
    Cheers

    This issue isn't external drives, it's the mini, and installing the program.
    http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
    The specs do not seem to require an internal superdrive.

  • Optiarc DVD and external DVD unable to read discs?

    I am trying to burn an Ubuntu DVD. Unfotunately, either if I introduce a DVD in the in-built Optiarc unit of my iMac or in an external DVD recorder, the iMac seems unable to execute the task correctly.
    If I try to use the Disk Utility, the "Burn" button is not present.
    If I use a different software, uch as Burn.app, the disk is toaast, but the iMac says it is unable to read the disk content.
    Btw, I have downloaded the correct iso file of Ubuntu.
    Any possible help?
    Thanks

    17 months later... Any solution ?
    I have got the same issue : I can read all CD-ROMs but not DVD (any DVD)
    Same result using internal Superdrive and external DVD reader (both USB and FireWire).
    iMac 27'  / 3.33GHz Intel Core 2 Duo
    OPTIARC DVD RW AD-5680H (3AHB) - ATAPI
    Mac OSX 10.8.4 (12E55)
    OSX Mountain Lion reinstalled and all updata applied
    Test with different accounts, including a root account
    Thanks

  • Unable to alternate internal DVD RW drive for external DVD driv

    Hi,
    Please call me Yogie.
    I have a G4 computer issue.
    I have a Mac computer (G4-500mhz dual) with a Pioneer super drive. It has failed, to the point where it won't read dvd's. I've purchased an external dvd-cd burner (lacie) and when I want to record photos from Idvd, the Pioneer super drive tray will open for dvd insertion, but doesn't recognize the dvd. I need to override the Pioneer superdrive, so I can use the Lacie dvd rw drive. How can I do that ?
    Thanks

    Hi Yogie:
    Welcome to discussions!
    How is that LaCie drive formatted? You must use HFS+ to store iMovie files, not FAT32(DOS) or Unix.
    Connect the external drive and then launch Disk Utility (Applications/Utilities). You'll see your external drive in Disk Utility's side bar; select it and then click the Erase tab at the top. From the Volume Format menu select which type of formatting you want (most likely Mac OS Extended-Journaled) and then click the oval Erase button at the lower right.
    Sue

Maybe you are looking for

  • How to use wildcards in the query

    Hi all, I have the following code: pStmt = conn.prepareStatement("SELECT * FROM library.books where title like ?",java.sql.ResultSet.TYPE_FORWARD_ONLY,java.sql.ResultSet.CONCUR_UPDATABLE); pStmt.setString(1, name); rs = pStmt.executeQuery();When I tr

  • How do I get my back, forward, reload & stop bottons working again?

    When I hit Firefox icon on desktop, the Firefox page come up with "untitled" blank page comes up. I have no access to the toolbar with back <, forward >, reload and stop x buttons.

  • On making call to Oracle procedures from Java, Value becomes null on oracle

    We are using some user defined Oracle data types in my Java/J2EE application and some of them are Oracle collections(ex. VARRAY). We are making a call to Procedures/Functions from Java, there are some parameters of user defined data types declared in

  • I want Inbound Delivery number from Material document

    Hi, I wish to know where is the Inbound Delivery number (which SAP table) stored when we do a MIGO_GR against an Inbound Delivery ? I want to fetch the Inbound Delivery number from the Material document number. I observe, when we do a MIGO_GR against

  • Involuntary random mouse/cursor movement

    Hi-my cursor seems to move when I am typing randomly, which means sometimes i can be typing away and suddenly i am typing in the middle of previous text. It also seems to randomly move and block text which means if I dont realise I end up deleting te