DVD Studio Pro 2 will not burn DVDs

I have recently upgraded to Leopard. I can now build an entire project in DVD Studio Pro 2. However, when I try to build, format, or build & format a DVD the application will "quit unexpectedly."
I contacted Apple support and was told to uninstall the program and re-install it. I did that and the problem still exists.
All of my software has been updated.
I understand the software is "older" but if it were unsupported software, why can I build an entire project and only have trouble when it comes to transferring it to a DVD?
My DVD superdrive has been upgraded, and I have burned photo DVDs and CDs with the new burner without any issues.
Does anybody know what else I can do?

PaulaMac wrote:
David,
I didn't mean to offend you with my frustration with Apple. I understand the need to upgrade operating systems. However, I don't believe that upgrading operating systems should make software obsolute. When Windows changes their operating systems, the programs you have installed on your PC will continue to work.
Leopard is many interations passed the OS that DVD SP came out and you would have the same issues in Windows with what software runs or not and usually Mac software has a pretty good lifetime. DVD SP has not been sold as stand alone for quite awhile unfortunately. Though I do have some issues with Apple from time to time, this is one of those where I cannot fault them.
Try Tiger (I am running PS3 on 10.4.11 MacBook Pro with no issues), but make sure to deauthorize your Photosshop 3 before doing anything on the sytem. As to Leopard, I am not a big fan yet, so unless you absolutely need it, you are not missing much yet.

Similar Messages

  • DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

    I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
    I am using DVD Studio Pro 2.
    Any ideas?

    Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

  • DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

    PLEASE HELP!!!
    I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
    Building Project Treesitting DVD with sub+menu
    17/12/2007 14:12:01
    Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
    Starting DVD Build TREESITTINGDVD_WITHSUB...
    Compiler Initializing...
    Precompiling Project TREESITTINGDVD_WITHSUB
    Compiling VMG Information...
    Created 15 PGCs in VTSM1
    Created 8 PGCs in VMG.
    2 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu 1)...
    Skipped Rendering Menu:Menu 1,Language:1.
    Compiling Menu#2 (Menu 2)...
    Skipped Rendering Menu:Menu 2,Language:1.
    Writing HV000M02.EVO
    1 VTSs and 1 Titles will be created...
    Compiling VTS#1 (Track 1)...
    Preparing Subtitles...
    Muxing HV001T01.EVO
    Done.
    Linking VMG...
    Linking VTS#1...
    Writing VTS#1...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    +*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
    +*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
    Start formatting
    Formatting as Standard DVD
    Simulation mode is off
    Lossless linking is on
    Number of layers is 1
    Doing side 1 of 1
    Playable in region 1,2,3,4,5,6,8
    Disc size is 12 cm
    Disc has no copyright material
    Writing UDF 2.50 structures
    Writing files
    Writing final UDF information
    Formatting finished.
    Formatting finished.
    DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
    I have burned another project with menus succesfully..

    Hi
    FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
    You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
    - Create a simple black JPG file i.e. in Photoshop
    - Create a Slideshow
    - Add a the JPG to the slideshow, set duration 2 secs
    - Set the Slideshow as First Play
    - Set Slideshow End Jump to your Main Menu
    Build and burn again.
      Alberto

  • Is it true that DVD Studio Pro will not burn HD discs?

    I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
    Thanks, Bob

    You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
    SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
    In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

  • DVD Studio Pro will not recogise my chapter markers!!!

    When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
    However, when it gets into DVD Studio Pro, it does not recognise them at all.
    I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
    How can you get Final Cut Pro to just export chapter markers.
    Help!

    You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
    There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
    Hope this helps.
    Max Average

  • DVD Studio Pro will not load videos

    Hello,
    Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
    I have deleted my DVD Studio Pro preferences several times with no success.
    Any Ideas?
    Thanks,
    Mike Kommersmith

    When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
    I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
    I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
    I can import audio, stills ,etc without a problem.
    I'm just amazed that noone else ran into this problem yet.

  • DVD Studio Pro - Markers and burning DVD questions

    Hi everybody... I'm not very experienced in DVDSP, actually this is my first professional project with DVD Studio.
    I have three issues I don't know how to solve:
    1. I have 4 differents video tracks in my DVD. Each track has some Chapter markers. When I use the simulator to test the NEXT/PREVIOUS Chapter everything is ok and when the last Chapter of the current video is reached, if I press again "Next Chapter" nothing happens and that's ok. The problem is that when I test the DVD in my DVD reader, pressing "Next Chapter" when the last chapter of a video is reached goes into the following track. I do not want this to happen, I just want to limit the chapter next/prev on the current track. Is it possible?
    2. I set precise chapter markers for the beginning of a new section. On Mac Simulator and Apple DVD Player everything ok, but on the actual standalone DVD player the audio of the next marker is cut for about 2 sec... So the chapter is not exactly as design, first moments of the audio cannot be heard and that's very bad because this is a video lecture... Anyone has experienced that or has an idea on how to solve?
    3. I read in the forum that to burn the actual DVD many suggests to use Toast instead. When I create the build and import in Toast the VIDEO_TS and AUDIO_TS files, I see that DVD Studio creates some layout non DVD standard files in the VIDEO_TS folder. Some suggests to remove these two files. It is safe?  Why DVD Studio includes them in the build if they are NOT according to DVD standards?? 
    Thank you so much for anyone who can help!!
    Andrea

    Merlino wrote:
    3. OK so if it's safe to remove the files from the build manually no problem. I've found only two files one .LAY and one .layout. Are there any other files that need to be removed?
    No, those are the only ones.  One other item that you've probably already figured out: The Orange Book ("the DVD Bible") is very specific about content and very limited in what it allows. I believe the reason for this is that the specs were decided almost 20 years ago and as compared to current electronic devices, the players are dumb as a rock. While we're all willing to deal with this, it leaves one significant pitfall: If you are not careful with the naming of your "Build" folders you'll quickly have dozens of identical folders with contents that appear identical except for how many identically named files they contain.
    I've adopted a policy of religiously naming my build folders with descriptive and explicit names ("Wash D-I Recital 2013 Build 1") and stayed away from anything that requires me to remove the .layout file. It is the only actual identifier 'til you open the VIDEO_TS folder in a player. DVDSP doesn't actually remove the layout files, it just discards them from the data stream as it burns the files.
    That said, thanks for the work-around idea you came up with; you're going to be a really good author with that kind of savvy.

  • Buttons work in DVD Studio Pro, but not in DVD Player. Why?

    I recently upgraded I movie I made to Dual layer disk. I had already built one for a standard 4.7 dvd but now I was putting on a director's commentary so I need more space. So I opened up the original DVD Studio Pro project, thats worked fine for over a year, then saved it as "director's commentary", then simply changed the settings for a Dual Layer. In DSP the buttons on the first menu work fine. But when I build it and open it up in DVD Player the buttons dont activate. Even when you roll over them there is nothing there.
    Whats happening?

    You can find information on Reader Extensions on the developer center: http://partners.adobe.com/public/developer/livecycle/readerextensions/devcenter.html
    For help with the buttons to navigate, go into Designer help and search for "Attaching a database script to a button" (without the quotes) and this should provide you with the information that you need.
    Michael, is this where you found your information the first time?
    Catherine

  • Dvd studio pro does not burn readable dvds on other platforms

    I have DVDSP 4.1.2 and always used it to create DVD with content.
    Now after I upgrade to 10.6.4, I can burn DVDs but they are not readable on other platforms (PC or DVD Players).
    Thank you

    I have no such issues on my systems, we burn lots of DVDs. Description suggests something wrong with your DVD drive not the software or OS since neither Eric nor I can duplicate your problem.
    bogiesan

  • HT1338 after upgrading to OS Mountain Lion my DVD studio pro will not compile.  There doesn't seem to be any software update for DVDSP4.

    after I upgraded to mounatin lion I tried to make a dvd with DVSP4  All goes well importing, connection chapters etc.  Looks fine in simulate.  When I try to make the DVD the measseage says compiler failed.

    I went back into DVD SP and clicked on build.
    After the build I was able to burn a disk.

  • SuperDrive will not burn dvds

    I can burn CDs,play CDs and watch DVDs. I can not burn DVDs. I have iLife but I cannot run iDVD because it is not compatible with of my version of OS. Why I don't know. Why should I have to buy every upgrade that come out? I can live with that, sort of, but why can't I burn a data DVD? I looked for a new driver but there does not seem to be one for Leopard. will I have to buy iLife 09 to bun a DVD?

    This is what the system profiler says about disc burning:
    HL-DT-ST DVD-RW GWA-4082B:
    Firmware Revision: C03D
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds

  • My DVD will play DVD's but will not burn from FCP

    my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

    You need DVD burning/Authoring software.
    EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
    iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
    You would need to search for this on online sites like Amazon to see if you can still purchase.
    You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
    Here are a few copies of this for sale on Amazon U.S. site.
    http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
    Roxio Toast is another option.
    http://www.roxio.com/
    And freeware burn software Burn for OS X.
    http://burn-osx.sourceforge.net/Pages/English/home.html

  • Will Not Burn DVD: Error code 0x8002006D

    Hello
    I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
    When trying to burn a DVD it comes up with following message:
    Sorry, the operation could not be completed because an unexpected error occurred
    (Error code 0x8002006D).
    I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
    Any ideas what the problem is, and are there any possible solutions?
    Thanks for any help.
    Message was edited by: bob1144

    Silly rabbit wrote:
    ...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
    I've never had any issues with it either, I still think it's a good utility.
    For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
    Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
    Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
    http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

  • I am using DVD Studio Pro to create a DVD. The assets total about 2.4GBs using a 4.7 GB disc I still get the error " not enough space on disc" Does anyone know why?

    I am using DVD Studio Pro to create a DVD. The assets total about 2.4GBs using a 4.7 GB disc I still get the error " not enough space on disc" Does anyone know why?

    Start by using this to make sure your assets really fit on the disk:
    http://www.kenstone.net/fcp_homepage/bit_budget.html

  • M30x MultiDrive will not burn DVDs from Windows Movie Maker

    Hi,
    My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
    I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
    Does the multidrive have problems, with cheaper brand disks?
    Just to note,
    The laptop has been back to the support guys three times so far with various issues.
    (1) The hard drive failed.
    (2) The multidrive failed.
    (3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
    Note: The harddisk, not the exhaust fan makes the most noise in mine!
    Thanks

    Hi
    As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
    Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
    I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
    Best regards

  • Encore CS6 will not Burn DVD and restart computer

    Encore CS6 will not Burn DVD and freeze then  restart computer.  But if I burn to a Image file then use a program like Image Burn no problem burning a DVD.  Whats up?  The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues.  Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760  Raid 5 system.

    Things and Software to AVOID when authoring/burning a disc.
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

Maybe you are looking for