DVD Studio Pro 2 works with new MacBook Pro Intel Duo Core 2?

Thanks.

If you get it to run you should not count on it working. Even 4.0.x, you need 4.1.x to have anything that is officially supported. I am not sure if 2 evens runs well on Leopard, let alone an Intel Machine.

Similar Messages

  • Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

    Yes, I too had this problem.
    I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
    MacBook Pro Retina running 10.8.2 (12C54)
    Lightroom running 4.1
    Hope that helps.
    aa

  • Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Update the software. There is no reason to run a two year old version.
    Russ

  • What blank DVD-R will work with a macbook pro and Matshita UJ-857E

    Hi in my macbook pro is the factory fitted Matshita UJ-857E superdrive, when I insert a blank DVD-R it spits it out, blank CD's work ok.
    I have Reset the System Management Controller (SMC).
    I have tried three different types of brands including maxell, verbatim and cheap woolworths brand.
    I bought an external USB DVD burner and this recognises any DVD-R I throw at it, so I think it can either be a faulty drive or it's a bit fussy about the brand of DVD's it can recognise.
    Please can you post the blank DVD's that work on your macbook pro superdrive

    Thanks for pointing that out, re posted here
    http://discussions.apple.com/thread.jspa?threadID=1779572&tstart=0

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • 17" Cinema Display doesn't work with new MacBook Pro

    I have used a 17" Cinema Display with a MacBook Pro without problems for the last year. I just bought a new MacBook Pro and a Mini DisplayPort to DVI Adapter. Hooked it up and no display. Reconnected to my olf MBP without the Mini DisplayPort to DVI Adapter and it still works great. Any thoughts?

    I have the same machine and the same drive (for about 6 months) they work fine.
    The first suspect is the internal SATA cable, replace it.

  • WD External Hard drive not working with new Macbook Pro

    I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
    Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

    I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
    1. go to the manufacturer's website (in this case Western Digital),
    2. locate my external HD, download the download.
    For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
    http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
    Install the downloaded app.
    3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
    [I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
    4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
    5. Run "WD Drive Utilities" and run diagnostics.
    6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
    Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

  • Toneport UX2 not working with new MacBook Pro 10.6.2 Snow Leopard

    I do some casual recording using a Line 6 Toneport UX2. Previously i was recording on an older Mac Mini. Recently i upgraded to a new Macbook Pro (Snow Leopard 10.6.2)
    The new Macbook is not responding at all when i plug in my toneport, all the software for the toneport is installed.
    I think the problem is that my toneport is not compatible with an intel Mac. Is this right?
    And if it is can i fix this problem with some kind of upgrade for my toneport software(gearbox)?
    And if there is no solution can someone recomend a new audio interface for me to get? Under $200.

    I use a Toneport UX2 with my intel iMac. I never had the problem you are describing while using Gearbox with GB. However your problem sounds very similar to one I have experienced when I loaded up Line 6 Pod Farm. I discovered that when I start Pod Farm and get the message you mentioned, if I quit Pod Farm then immediately start it again, everything communicates just fine and I'm back in business. I would like to see a fix for this glitch, but for now I just start twice and then get to work.
    Give it a try! I am curious to know if you are in the same boat as me.
    As a side note, Recently Line 6 offered Pod Farm for no charge to registered owners of a Line 6 interface such as ours. You may want to check it out. It gives you some more options to play with.

  • Motion not working with new MacBook Pro

    I've installed the Production Bundle on a new MacBook Pro 2.5 GHz Intel Core 2 Duo. Everything works fine, FCP, DVDSP, Compressor but Motion crashes every time with an error message:
    "The problem may have been caused by the Ozone plug-in"
    Reinstalled software and still have same error msg.
    Any one have similar issue with Motion? Any ideas on how to fix?
    Thanks in advance.
    _john

    It's easier for me to just point you here:
    http://www.applemotion.net/Troubleshooting/Troubleshooting.html
    but it's on my site where I also promote my books and training products so I have to provide this disclaimer:
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link"
    I consolidated all the info I could gather from these forums on this issue because it arises so frequently.

  • Question on how networking works with new Macbook Pro

    Hi,
    I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
    I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
    Thanks for your help!

    Hi
    Your MacBook Pro should just work when plugged into an ethernet connection.
    Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
    In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
    So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
    I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
    Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
    If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
    Phil
    Message was edited by: Philip Tyler

  • ITunes match isn't working with new Macbook Pro

    Hello everyone,
    I have had iTunes Match for years with no problems on any device mobile or otherwise. I just purchased a new Macbook Pro w/Retina. I unboxed, powered up, and updated all software. I set up the Macbook with my one and only apple ID and logged into iTunes with the same ID.  All of my purchased music is available, however when I go to turn on iTunes match I get this error: "THIS COMPUTER IS ALREADY ASSOCIATED WITH AN APPLE ID. You can use iTunes Match on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days.". After this I have no other option but to close the window. I have tried logging in and out and restarting the computer but have had no success. Any help would be appreciated.
    Thanks

    Hi
    i ii suugest you contact Apple support Contact Apple for support and service - Apple Support
    JIm

  • Final Cut Studio HD problem with new Macbook Pro

    I bought FCS HD and installed it onto my new Macbook Pro, but when I went to run Final Cut, it told me it was missing the graphics card. Now, the graphics card is different to my old laptop and G5, but surely the new macbook pro should be able to run my Final Cut Studio.
    I was planning to buy the upgrade, not a whole new programme - now I am worried I will need to buy both an upgrade and Final Cut Studio 2.

    This is a FCP HD, but no Final Cut Studio HD
    My guess is that you are trying to run FCP 4.5 HD on an Intel Mac.
    It isn't reliable even if you could install it.
    You need FCS2 -- at the upgrade price.

  • Apple 23" HD Cinema Display no longer working with new Macbook Pro

    I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

    Ryan Nagy wrote:
    Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
    There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
    Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
    Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
    Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
    I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

  • Display not working with new Macbook pro

    My son gave me his 1 year old Macbook pro 6 and in connecting it to my Apple cinema display it gets all these horizontal broken red blinking lines across the whole screen. Disconnected and reconnected the new adaptor I bought and it seemed fine till i tried to begin work and the lines retruned.

    Hi there shelley99,
    The behavior of multiple displays had changed in OS X Mavericks. I would recommend reviewing the information in the article below.
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    -Griff W.

  • How do I get usb superdrive to work with new macbook pro. superdrive rejects cd ?

    Just purchased new system. (never had an apple before) so I am all at sea. followed the instructions to uodate the system. whenI inserted a cd with program to be installes foe a Mac, it was ejected. inserted a cd with 'jpeg files only on it it too was rejected, with no message. Am I missing anything?

    I suggest you return the Apple Superdrive and buy any other brand external DVD drive that connects by USB port.
    Any brand will work with your Mac, cost less and work better.

Maybe you are looking for

  • Cannot Open HFM Application in Workspace. "The RPC server is unavailable.

    Hi All, I cannot open HFM Application from Workspace. Planning works fine. Restarted the HFM services and tried but no use. Error shows "The RPC Server is Unavailable. Error code:- 2147023174 Details shows following. Trace: Error Reference Number: {2

  • Working with different versions of FCP

    My apologies if this is answered somewhere else but is there any way to work on a newer version of FCP then take that project to an older version? We have 5.1 at home but the workplace has 5.0. I'd like to do some work at home and am not sure how tak

  • My iphone 4s will not sync with my 2010 Ford escape

    After going through the pairing process, it says it's connected, but the wheel keeps spinning.  When I try to use the phone, the car display say's "no phone found."  It worked fine with my Blackberry, but not with my iphone.

  • How to pass parameters to configuration files

    Hello, I have an application which uses several libraries and frameworks like log4j and hibernate. Each library/framework is configured via its own configuration file, some configuration files are in xml format and others are in properties format. Ea

  • Reinstallating elements 10... Licence screen goes in endless loop - solution?

    Reinstalling Elements 10 after the price went up for CC-full and I downgraded to just CC-LR and PS. But can't get past accept licence screen. Click OK to accept that and it just goes round in an endless loop where the licence screen reappears each ti