DVD STUDIO PRO 4 - STOP SNAPPING

Hello,
I have a series of about 50 clips I've dragged into the DVD Studio Pro timeline. I need to remove one of the clips in the middle and the video snapps back to the previous clip but the audio stands still. How do I delete a video and audio clip in the middle of my timeline while maintaining my sync?
Thank you

You selected the audio and it couldn't be deleted along with the video? Check to see if the audio track is locked.
Russ

Similar Messages

Animations, Themes in DVD Studio Pro 2 Stopped Working! HELP!

Hey All,
I upgraded to 10.4 and did all the necessary updates, including pro app support. now DVD Studio Pro 2 is no longer displaying any type of Animation. Whether it is a movie file or Theme Animation, all I get is a black screen in preview, Canvas and Final Burn. It has totally hindered my ability to create any type of animated menus. I've checked DVDSP2's packages and all the movie files are there and work fine in QT but not in DVDSP2. I need some serious DVDSP2 genius to help!
Thanks!
PowerMac Dual G4 1.2 - 1.5 GB RAM - GeForce 4 Ti Card - Quicktime 7 Pro Mac OS X (10.4.6)

I wasn't going to say anything, but, some people on these boards, (having simalar issues) had to wipe there drives and reinstall, before everything went back to normal.
I just didn't want to have you go that far, unless everything else failed and it's beginning to look that way.
I personally, when a major upgrade to the OS occurs, wipe my drive, just so there is no strange behavior with my application and gives me a chance get rid of all the unseen trash in the background, (that can cause problems) which are invisible to the user, (I do this about once a year.)
G5 Quad Core 2.5GHz 6GB RAM Mac OS X (10.4.6) [storage] X RAID's : [capture] Io : [decks] Betacam SP, S-VHS, DSR-11

Using a .WMV file in DVD Studio Pro

Hello All,
I'm so dangerously close to having this whole thing down, that the challenges are becoming excrutiatingly painful.
I've completed my edit.
I've exported my FCP edit to Quicktime.
I've downloaded Flip4Mac
I've exported a version of the FCP to a WMV file format.
Now I want to import both assets (QT and WMV) to DVD Studio Pro. I'm trying to make it so there are two seperate versions on the DVD.
As I attempt to link a button to the WMV file, I get the rainbow wheel turning, and it never stops.
So, I guess there are a few questions:
1. How can I force the rainbow wheel to quit. Until now, I've just shutoff the computer (not a good idea).
2. Is it possible to combine the QT and WMV files on the same DVD?
3. Am I totally confused?
Thanks.
DG

Hi
She can't play it on her PC, nor can I at home.
Ussually it's a DVD player software matter. Windows Media Player is not intended for DVD playing. Did you use it when it failed? Try with the free and cross plataform VLC Player.
Some threads in DVDSP forum about PC compatibility (USe the search feature and you'll find a lot of them):
http://discussions.apple.com/thread.jspa?messageID=6020916
http://discussions.apple.com/thread.jspa?messageID=6095226
http://discussions.apple.com/thread.jspa?messageID=6374894
EDIT: SOMETHING ELSE
* DVD Authoring/burning tips thread *
Alberto
Message was edited by: Silal

Motion 3, DVD Studio Pro 3, Compressor...fail to display interface

Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
First, all the apps of Final Cut Studio 2 crashed on startup.
I recall that the last thing I did is trashing the newly installed trail version Aperture.
After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
Same thing! No interface at all.
At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
Has anyone run into the same situation? Any enlightenment will be appreciated!

I have just installed Leopard ans having problems with DDVDSPRO crasshing, can you please expand on how i may install prokit.framework and Browerkit frame work with Pacifist. I am not an expert please bear in mind!!
many thanks

Motion 3, DVD Studio Pro 3...All Pro apps got corrupted by Aperture

Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
First, all the apps of Final Cut Studio 2 crashed on startup.
I recall that the last thing I did is trashing the newly installed trail version Aperture.
After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
Same thing! No interface at all.
At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
Has anyone run into the same situation? Any enlightenment will be appreciated!

Similar to the problems diagnosed in another thread - though they used the retail installation I think.
This is a link to how they fixed it:
http://discussions.apple.com/thread.jspa?threadID=1311441&tstart=0&messageID=620 4405#6204405

DVD Studio Pro not playing back audio of asset converted from FCP via compressor.

I exported project via compressor:
File Extension: m2v
Estimated file size: 4.34 GB
Video Encoder
    Format: M2V
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV
    Crop: None
    Frame rate: 29.97
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 3.6 (Mbps)
    2 Pass VBR enabled
        Maximum data rate: 7.5 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 15, Structure: IBBP
    DVD Studio Pro meta-data enabled
This took about 7.5 hours. I exported the audio separately as AC3. Finder plays it sound & pictures. Quicktime plays the video. DVD Studio Pro, when I drag the assets (video, audio) to the timeline editor, so I can play it in the viewer, it plays the audio the video is black. No setting in view or any other setting will get it to play the video. This project is due to ship today and I don't want to re import it if I don't have to.
I exported this project before the MPEG2 export as a Qicktime with .mov suffix. This plays alright, but there is artifacting around motion. I think this is due to low VBR, but don't know. Can ayone help?
Dix Moser
[email protected]
FCP Studio
PowerMac 1.8G 3G mem 250G HD
750 G ext. Firewire drive (where media is stored)

If I may chime in...
I'm a little confused on the "what plays what" part, but all that really matters is what DVDSP sees/plays.
I've worked on a system like yours and what I'd recommend is:
1. NEVER export via Compressor. It's just ungodly slow on anything less than a Quad. Export a self contained QuickTime Movie using the first export option and use that to feed Compressor.
2. Segment your output into manageable clips (I like 15-20 minutes) both to perfect the encoding and so you aren't re-encoding the whole show if something goes sour. It will all play fine as long as it's all in the same DVDSP timeline.
From what you describe, I'm thinking you're on an early version of Compressor that had A-Pack as the AC-3 encoder. This is no biggie, I mention it mostly to verify. Early Compressor was good too.
Make maybe a 5 minute piece to tune up. Just export as normal, then into Compressor. Your encoding values seem about right. Get the AV pair into DVDSP and it should play. I'm guessing that part of your problem is that the processor is fighting to handle the project size. Build the test clip project and look at it in DVD Player to view what would have been burned. If all looks OK, go for it. If not, bring back the results for discussion. This should be a snap, it's just a really big project. Keep your head up, I had a friend do a 225-minute disk on his G5...

Copy-Protecting DVDs against piracy in DVD Studio Pro; or otherwise ?

Copy-Protecting DVDs against piracy in DVD Studio Pro; or otherwise ?
I'm about to start encoding to MPEG2 a very important project that I've edited in Final Cut Pro.
It is vital that it cannot be copied by the client or I could lose a lot of money.
In the past this has never been a concern, but in this case it is very important.
What is the best way to prevent a client/people from copying your DVDs?
Is there anything I can do within DVD Studio Pro or is there anything the Replication house can do at the Glass-Mastering stage?
I'm sure this topic has been covered, but a quick search found nothing.
Thanks guys.

Common problem but no easy answer. It's simply too easy to get around.
If you want to prevent finished master disks being copied in the same way commercial disks are then you will need to get them made at a duplication facility. Not cheap. You can't do it in DVD studio, it's to do with the disk burner.
On a feature film it is very important to prevent copies of work in progress. What a lot of cutting rooms do is make dvd's with the name of the person burnt in and a copy number. Often a large X with 30% opacity is put in the middle of frame.
This can't stop copies being made but at least you will know where they came from. It also seems to make the person who's name is burnt in take more care.
Sorry but thats the best I can offer.
John

DVD Studio Pro doesn't run anymore, please help

After launching DVD Studio Pro an alert appears: "can't find Sequence BranFIN-00000029". Then it asks search or cancel and then the program stops running whatever I do, and needs a forced quit. The same happens again and again after restarting it, even after a hardware reset. What can I do? Thanks in advance. PR.

Can you launch DVD SP without clicking on a project? Looks like you used a reference movie in a project and part of it is gone. (In other words it is probably that one project and not DVD SP in general). Cancel should work. Have you moved files/deleted render files/swithced hard drives?

DVD studio pro not playing entire video

When I use the simulator it only plays a portion of the video, and when I burn it to a DVD it stops at the same point. But both the audio and mpeg2 in the track play all the way through though. What am I doing wrong?

deadbeatpanda wrote:
So if the project is corrupt, does that mean I just have to re export my project in FCP? I used quicktime conversion and I read that it isn't recommended for exporting to be burned to DVD. I orginally tried to use compressor to get it to mpeg2 for DVD studio and what not so I compressed it again and the same thing happened. I also tried to use the share option in FCP with the DVD option but it exported for over 10 hours and was stuck at 5 minutes remaining for about the last 3 hours so I just cancelled it. This is the first time I have ever had to burn to DVD so sorry for being such a noob. And I have no menu, the DVD just needs to play automatically.
No, the clips do not automatically need to be re-exported. The issue with QuickTime is primarily a quality issue.
As Michael mentions above, the preferred workflow is "File: Export: Quicktime movie (NOT quicktime conversion) with current settings. Take this file into compressor and apply the appropriate dvd preset."
I like to think of the export as a "master" file that I use as a basis for transcoding.
I have little knowledge of the newer output options like Sharing. My experience has been that the things done to "simplify" the work usually compromise quality and frequently don't work well.
Here's an article on making an autp-play DVD:
DVD Studio Pro: Authoring a DVD that plays automatically without a menu

XGrid and DVD Studio Pro

Greetings all,
I've searched the net for an answer to this and couldn't find one, although I'm sure this question has been asked hundreds of times before. I just finished sorting through this forum as well and couldn't find a similar question. It doesn't seem like this forum is too active, but I'll give it a shot anyway.
I use Final Cut Pro HD (4.5) and DVD Studio Pro 3 rather heavily. We have four systems and may have a new addition soon. I'd really love to be able to speed up render times in DSP at the very least.
So far I've set up the grid. I used XgridLite to make one of the computers the controller. Through Apple Preferences I enabled Xgrid on the agent systems (including the controller) and pointed them to the controller system. The grid is password-protected, and all agents are set to receive tasks regardless of whether they are idle or not. With the exception of one system (the slowest one), all systems successfully joined the grid and are in "Available" status when viewed with Xgrid Admin.
I presume the grid is properly set up so far. When I try to encode with DVD Studio Pro, however, the admninistrator utility doesn't show any of the systems becoming active. Note that the primary encoding system was the same as the controller system - was that the problem, perhaps?
All systems are currently linked through a 100 mbps network. We'll soon be moving them to a 1 gbps network. I was hoping that the 100 mbps network would at least let me see that it worked, even slightly. I looked through DSP's preferences but I can't find any options about network encoding or tying into Xgrid. I presume that acting as a client to the Xgrid network is a function built into Xgrid-enabled programs (or scripts you'd write yourself).
Any advice? If anyone can say for certain that DSP 3 won't do it but that newer versions of DSP will, I can request an upgrade and probably get it. I'd rather not do that unless this will for sure work with Xgrid, and only if Xgrid will provide a reasonable performance boost.
Thanks in advance!
David

This post has received a number of views but no comments back, so I thought I'd give a brief update on my findings. Even though I've seen Xgrid as being marketed as something that could be used for media, it is the wrong tool for the job when it comes to Final Cut Pro, DVD Studio Pro, and likely other media applications. What should be used instead is a program called Qmaster. If you have DVD Studio Pro 4, Qmaster is included in the "Extras" content on the disc. Qmaster allows for distributed work to occur through Compressor, which Final Cut Pro and DVD Studio Pro rely on.
I have requested that my department upgrade to DVD Studio Pro 4, and may update with how successful it is. Otherwise, if you were like me and were looking around the internet for how to get this stuff working with Xgrid, stop and begin looking into Qmaster.

Quick and Dirty "Chapters" with DVD Studio Pro?

Ok, so here is my workflow:
I have a project in FCP. It's one large 60 minute file broken into segments from start/stop in my timeline.
- I am going to export this to a quicktime reference file (uncompressed, 10bit)
- Then use Compressor to turn the uncompressed movie file into MPG and AC3 video and audio format
- Import the mpg and the ac3 into DVD Studio Pro as a track, set to play on dvd start
- then burn the DVD
My question is, is there any quick way to lay down chapter markers where the segments are so that when I put the DVD into a regular DVD player I can just skip to the next clip with the DVD remote? (My source is one large 60 minute file with about 30 start/stop points in FCP)
I just want to be able to scan the disc in the DVD player with the remote control without having to use the "search/speed" buttons to manually scan all the footage.
If this is a noob question, and I am missing something, please explain.
- I DO know how to add chapter markers in Compressor (and FCP), but am not sure if that translates to DVD studio in the output file, and I'd really like to do it in FCP because the segment start/stop points are already in my timeline.
Thanks!

1st, a QT reference movie is the same compression as the original files, not uncompressed. Once you're workign with a compression scheme (HDV, DVCPRO-HD, NTSC-DV) going to uncompressed does absolutly nothing for you, it does not add quality, just gives you larger than nessisary file sizes. If you export, use either a QT reference movie (there is no choice of compression scheme), or a ProRes QT.
If you want the best quality, go directly from the FCP Timeline to Compressor, don't export anything.
If your chapter markers in FCP are Chapter markers, go directly to Compressor, use one of the DVD preset folders, the chapter markers will translate into DVD SP. You can than use DVD SP's automated chapter menu function to get things done fast, create Stories for more complex functioning, etc.
This is old, FCP/Compressor parts may be outdated now, but the DVD SP part is still valid. Shows that functioning I'm talking about.
http://bbalser.com/tutorials_long/DVDSP/DVDSP_Full_Orig.mov.zip

Compressor & Dvd Studio Pro not loving me! pls help.

Hi, so ive got a bunch of QT's that i want to put on a dvd. so i use compressor to make them mpeg2 (m2v) using the "DVD fastest encode 90 mins" (or the others) option. it does the work, but as soon as i drop them into DVD Studio Pro, it tells me that they are NTSC assets and thus wont read. How do i stop compressor from making them NTSC, and why the **** would it do so?
I never made them NTSC, but would like them to be PAL.
Any help would be seriously appreciated.
shot.

yeah thanks Luca.
i imagine that will work, it seems its a bit of a weird one. it only seems to go bad when im passing the converted files onto another mac with dvd studio pro. thanks for the help tho, ill let you know if i get sorted
cheers

Motion 5 and DVD Studio Pro

I apologize if this question has already been answered somewhere else, but I am wondering if Motion 5 will work with DVD Studio Pro 4. I have been working with both programs for years (as a hobby) and have enjoyed increasing my skills in Motion. I do a couple big projects a year, so I definitely don't do this full-time, although I'm hoping to change that. Although I had the entire FCP suiite, I only really used Motion. My motion program was pretty out-of-date (I think it was 2.1, although it did what I needed it to do) and stopped working properly when I upgraded to Snow Leopard. Before, I would just create my project in Motion, bring the motion document into DVDSP, add audio that I created in garage band, and burn to disk. I just bought Motion 5 and am learning a lot of new skills. However, when I imported a short Motion 5 document into DVDSP to see what happens, it just shows a purple still saying "Media Missing in Motion File." So, I guess there are 2 questions. Am I going to have to export my Motion files out as some sort of quicktime video to then be able to use in DVDSP (and what will that do to the quality)? Or am I going to have to get FCPX? And if I do get FCPX, I have read that the burn features are pretty limited. Any hopes that they're going to be updating DVDSP?

I just tried a Montion 5 (clip) in DVD Studio Pro 4 and it doesn't work. A Motion 4 (clip) worked just fine. You're going to have to export the Motion 5 clip as a Quicktime and import that into DVD Studio Pro 4.

DVD STUDIO PRO - How to make chapters loop?

Hi
I'm trying to create a DVD and my last problem I'd like to resolve before the final burn is:
Is there a way to make the Chapters in my Track Loop?
My scenario: I have 5 Chapters Total. In my Chpater Menu I created 5 Buttons so you can jump straight to 5 Chapters. But let's say for Button 3 (Chapter 3), when I activate/play it, if I hit SKIP FWD I can skip to Chapter 4, & 5, BUT if I hit SKIP BACK it stops at Chapter 3 (which is where I started - Button 3).
Is there a way for me to set it so that if I hit Button 3-Chapter 3 from the Chapter Menu - I can access Chapter 1&2 by hitting Skip Backwards while the track is playing? The only way I can think to resolve this is to add Chapter 1&2 after Chapter 5 in my Story List but that means I can only hit Skip Forward and it will eventually stop skipping forward once it hits Chapter 2. So is there a way to loop it???
Sorry I hope I explained it decent enough for you guys to understand
NEED HELP ASAP!!! Trying to finish for a client this weekend! :

Yeahhh so it took me giving up and just burning to DVD and playing it in an actual DVD player to realize that the DVD Studio Pro does its "behind-the-scenes" magic and will have that function automatically figured out for the DVD Player. DO NOT rely on the simulation feature...geez...problem solved.

DVD Studio Pro Error message

In dvd studio pro 4.1.2 I keep getting an error message when burning. "Media error L-EC uncorrectable error (OX11, OXO5.) I just started getting this message after years of no problems. It starts the burn and goes through Encoding but then stops less than 1 minute into Formatting/Writing Image. I have tried several different projects that I have already burned successfully in the past and I still have the same problem. I even tried burning in iDVD and have the same problem in that program.

sounds like your physical dvd burner needs replacing..
ive had similar problems and replaced the dvd unit and everything back to normal. depending on the mac model you have will depend how tricky it is, most tower units are straight forward, a few issues with some needing you to remove the plastic bit of the front of the dvd tray door so that it can come out of the g5 slot if i remember rightly. not hard though and pretty cheap. check compatibility first though to make sure the replacement dvd is going to work.

DVD STUDIO PRO 4 - STOP SNAPPING

Similar Messages

Maybe you are looking for