DVD Studio Pro 4 will not open after installing Leopard

I had trouble opening my film project in FCP studio 2 but resolved the problem by trashing the preferences. This did not help other programs like DVD studio pro which will not open at all or crashes as soon as it is open. It also gives me strange messages while it tries to open like" Media-application quit unexpectedly." Would re-installing help? I would have to begin with FCP studio pro and then update all the programs again. Is there an easier way to solve this problem? (Leopard is causing other programs to quit unexpectedly but I don't get messages that some part of the application has quit).

So far it seems the advice when going to Leopard is to due a total clean install of Leopard on a clean drive before installing the applications.

Similar Messages

Imovie will not open after installing leopard

Leopard was installed and then ilife 08. Imovie would not open- what do I need to do?

welcome cw50 to the  boards..
reading the iM08 and the Leopard boards here at apple-discussions, and other ext. boards, you'll notice many topics like yours..
there's actual no 'official' or unofficial workaround to fix that ..
just to add to database:
did you made a clean-install of 10.5. on your System?
or, as most of us would do, just 'upgrade' your OS, without reinstalling all software...?
and, please, don't hesitate to give Apple directly feedback:
http://www.apple.com/feedback/imovie.html

DVD Studio Pro 4 behaving strangely after install

Hi. I just did an upgrade from DVDSP 3 to 4 and it’s not going smoothly. First, I hadn’t used 3 in a while and in the interim, I went from OS 10.3.9 to 10.4.9. When I finally opened DVDSP 3, it was not a happy camper: slow and full of unusual quirks, such as when I go to IMPORT -> ASSETS, the pop up window disappears immediately and then is no longer accessible; when I import assets via the Assets window, the assets come in, however the "importing assets" progress window will not close; and I could not open preferences.
OK, so I upgraded to 4, but with all the same results. It’s acting very buggy. What can I do? I found another post in this discussion, all the back to late ’05, which cited the “Preferences window won’t open problem” but he/she was very vague about how that problem was solved.
Also, Compressor 2 won’t stay open for more than a second before quitting out. (I posted this issue on the Compressor board, of course.) I have a feeling these things are hand-in-hand.
Thanks!!

There are error messages for Compressor. In the console.log:
2007-05-20 07:25:20.387 Compressor[1924] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0x5b921b0]
2007-05-20 07:25:20.402 Compressor[1924] An uncaught exception was raised
2007-05-20 07:25:20.402 Compressor[1924] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0x5b921b0]
2007-05-20 07:25:20.402 Compressor[1924] * Uncaught exception: <NSInvalidArgumentException> * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0x5b921b0]
May 20 07:25:24 SMAComputer crashdump[1926]: Compressor crashed
May 20 07:25:27 SMAComputer crashdump[1926]: crash report written to: /Users/stephenaltobello/Library/Logs/CrashReporter/Compressor.crash.log
2, 0
In the system.log:
May 20 07:25:24 SMAComputer crashdump[1926]: Compressor crashed
May 20 07:25:27 SMAComputer crashdump[1926]: crash report written to: /Users/stephenaltobello/Library/Logs/CrashReporter/Compressor.crash.log
As for DVD SP, nothing pops up in the system.log, but the console.log has this error:
2007-05-20 07:29:34.059 DVD Studio Pro[1935] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0xf301330]
2007-05-20 07:29:34.089 DVD Studio Pro[1935] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0xf301330]
2007-05-20 07:29:35.999 DVD Studio Pro[1935] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0xf301330]
2007-05-20 07:29:36.000 DVD Studio Pro[1935] * -[NSToolbarView drawsBaseline]: selector not recognized [self = 0xf301330]

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

CS 6 MAC will not open after Installing Flash Player

After installing a the latest version of the Flash Player (MAC/Yosemite/Safari) Photoshop CS6, that had been working very well for a couple of years, now it will not open, or is not responding.
I reinstalled CS6 and still it doesn't work. The poblem may be related to the new version of Flash Player.
It there something I can do?
Please, help.
Thanks

Yes. Uninstall Intego Virus Barrier. You don't need it.
You will find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435

InDesign CS3 will not open after installing updates

Hello,
I am having a problem printing borderless with InDesign CS3. When my paper size is set on borderless my photos print very light. If Iremove the borderless setting the photos print fine.
In a effort to correct this problem I downloaded and installed updates for InDesign CS3 now InDesign will not open.

5.0.3 should not have installed after 5.0.4 (that's a problem with the installer), and it may have added problems. First things to try, though, before we get down to uninstalling and reinstalling again, are trashing the prefs (Replace Your Preferences), trying a new user account, and starting with extensions disabled (hold down the Shift key when you boot).
If it comes to reinstalling again, you should probably also run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) before reinstalling, and make sure you have the correct update which you can download again from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4029

DVD Studio Pro will not load videos

Hello,
Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
I have deleted my DVD Studio Pro preferences several times with no success.
Any Ideas?
Thanks,
Mike Kommersmith

When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
I can import audio, stills ,etc without a problem.
I'm just amazed that noone else ran into this problem yet.

Itunes will not open after installing yosemite

I installed Yosemite and have tried to repeatedly. Get my new Itunes 12 to open but it refuses. It will not make any indication that it is attempting to open. I have tried to reinstall it a number of times and it still will not open.
any help is appreciated.
david

Hi,
I've encountered the exact same problem.
iTunes wouldn't start up at all, even tough it had the correct version.
By browsing to the applications contents and running the itunes exec it would work.
Also running it through Terminal would work. But simply not by clicking the iTunes.app
However i've fixed it! by manually setting read and write so that you can delete the iTunes.app. (for a tut see http://www.tekrevue.com/tip/uninstall-itunes/)
Then manually Install iTunes again by downloading it at http://www.apple.com/nl/itunes/download/
Then it worked fine with me! Hope it helps.

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

DVD Studio Pro will not recogise my chapter markers!!!

When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
However, when it gets into DVD Studio Pro, it does not recognise them at all.
I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
How can you get Final Cut Pro to just export chapter markers.
Help!

You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
Hope this helps.
Max Average

Is it true that DVD Studio Pro will not burn HD discs?

I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
Thanks, Bob

You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

AE CS4 Will not open after Snow Leopard Upgrade

Ok, i posted this earlier but I don't think I was clear enough to get an answer. I recently did a clean install of Snow Leopard and a fresh install of my Production Studio CS4. Upon getting it all installed, I realized that After Effects will NOT open at all. It just bounces on the Dock a few times and then stops. Then after that, when you click on it, it bounces once, then stops. Every other program works great, only after effects is not working. Why is this? Is there something I need to do? I reeinstalled just the AE and downloaded the newest update, still, the same thing. I would appreciate any suggestions to get it running.

I experienced this when upgrading to Snow Leopard myself.
After Effects is one of many, many applications which require Rosetta to be installed. In Snow Leopard, Rosetta is an optional install on the disk. So just make sure you install it.
Now, the thing also is that once Rosetta is installed, the OS still seems to have AE flagged as an app which requires a missing component to launch. This was fixed after a couple of restarts, in my case.

OMiC will not work after installing Leopard

Does anyone know why OMiC will not work after upgrading to Leopard?
After downloading Leopard, went into mail and tried to open a windat file, but a message came up stating OMiC disabled. I deleted that version, and tried to download OMiC 1.7.7 but it won't even get thru the download menu, it stops at "installation" gives me a choice of Tiger, or Panther, and it will not let me go any further. Has this happened to anyone else???

I am not sure any of the solutions for these files have been made Leopard compatible -- I saw another post about this not long ago. See:
http://discussions.apple.com/thread.jspa?messageID=5736631&#5736631
Ernie

Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

Adobe Acrobat X Pro does not open after installing CS6

I successfully installed CS6 & Web Premium package. I found I could not open .pdf files so I reloaded Adobe Reader X and now realize I cannot open Adobe Acrobat X Pro to create .pdf files. Reinstalled Acrobat again this evening, restarted computer but same issue (Acrobe Acrobat X Pro - it does nothing when I try and open it). What am I missing? any insight is soooo appreciated!

After installation of the CS6 suite, everything worked great. I am not sure the time frame it took to notice the problem in Acrobat X Pro the first time as the user does not use it everyday, but the program would not open. PDF files would only open if you chose to open them in Acrobat Reader and would not open in Acrobat X Pro. There were no error messages nor were there any error logs in the event viewer. The program just would not open. If that user logged out of Windows and I logged in, the program would open but only for a brief period and then would close without warning and never open again.
I checked the dates and from the time that I last fixed the error addressed in this thread until it happened again was exactly 30 days which would make me think that the trial would end but it is actually not a trial. It is a licensed suite.

DVD Studio Pro 4 will not open after installing Leopard

Similar Messages

Maybe you are looking for