DVD Studio Pro Authored DVD plays on iMac, but not PC or DVD Player

Have put several film up on web using FCP. Trying to make DVD of movies using DVD Studio Pro. The DVD plays on my iMac, but not my PC or my DVD player. Any suggestions?

Pop your disc into your Mac. On the disc there should be two folders, VIDEO_TS and AUDIO_TS. If the VIDEO_TS folder is not there, replaced by something else, then you have indeed created a HD DVD. You need to completely start over.

Similar Messages

DVD Studio Pro: is it possible to burn unusual resolution video on DVD?

Hello All,
FCP 0.6,
DVD Studio Pro 4.2.1
Compressor 3.0.5
I have a short that has a resolution 1920 x 650 px (it is a split screen video). I am trying to burn it to DVD by using DVD Studio Pro. I tried to export the film from FCP by using Compressor. I customized the DVD Best quality: 90 min setting to "letterbox the area of source" in "Geometry" tab, but the result looks like the resolution is not preserved but conformed to the DVD and the image looks squished. I know I have long trip on this subject but I would love to learn if this is at all possible.
I know of software called: Popcorn from Roxio that supposedly burns anything into DVD. I dont know if I should bother installing and trying..?
Should I experiment with Anamorphic DVD (does a standard DVD player read those)?
Please help and thank you,
Izabela

The short answer is, unfortunately, no. The DVD standard is 720x480, either 4:3 or 16:9 anamorphic. If you do the math, you'll note you'll be looking at a LOT of black screen as you interpolate the 1920 down to 720, even if it's anamorphic.

Output from DVD Studio Pro plays on computer but not on TV DVD?

When I output a DVD from DVD Pro (16:9) it plays fine on the computer (and other computers) but not on a conventional DVD player. What am I doing wrong?

I don't want to take over this thread, but figured why start another when I am having this exact same issue. I create my project, everything is good, I simulate it and everything is good, I burn it to disc and play it on the computer and everything is good, try it in a conventional player and it says it's unreadable and kicks it out. I've tried it in Two different players that both have been able to play movies created in iDVD just fine.
I browsed my disc I created and it didn't have the standard files (VOB etc) so I thought maybe I mistakenly burned it in HD, checked the encoder settings adn they were set to HD. Fixed that so it was 16:9 SD, burned another and same exact result. Do I need to create a whole new project so it will encode the whole thing in SD? I did do a new movie track and it should have encoded it at SD but I think everything else (Menus, Slideshow, etc) are all in HD still (maybe???). Any suggestions or help are greatly appreciated.

DVD Burned from iDVD 6.0.1 plays on iMac but not a DVD player?

After burning a DVD production on DVD-RW and DVD+RW CDs and both directly from iDVD and by first creating a disc image. In all cases they worked on my iMac but none of them worked on the DVD player. Only the DVD+RW is compatible with the player and it appears the DVD starts to load but can not finish the process. Is there something I missed or is there a bug in iDVD 6.0.1?
The iDVD production was made from scratch using Magic iDVD and some video files. The Map has no errors and there where no error messages.

Is there something I missed or is there a bug in iDVD 6.0.1?
The bug is probably the format you're burning to...
Use DVD-R. I'd recommend Verbatim DVD-R burned at 4x or slower. I'll bet that will play just fine...as long as the DVD player is relatively new (2-3 years old).

Dvd plays on iMac, but not on TV?

Made short iMovie from movie clips, then to iDvd. Disc will play back through my G5 iMac but my stand alone player will not accept it to play through my HDtv. Would like to play it thru the TV. Any suggestions?
Jack

Thanks Shippey: Nothing unusual that I'm aware, but I don't do much with clips. These were made with a Nikon Coolpix. All my DVD' originate as still images, but these little clips are my daughters dog, and the dog is ill, so want a little record for her of the dog barking. Fortunately as I mentioned, the disc will play on my computer, but won't even load on the stand alone player for TV.
BTW, the movie has a theme and title at beginning and end but no sound except what was recorded on the clips.

HT203164 CD will play on computer but not in car CD player - what did I do wrong?

I burned a CD playlist to a blank CD and will play on the computer and a home CD player, but it won't play in my car CD player - did I do something wrong? Waht do I need to change when I burn another CD?

Did you burn it as an Audio CD or a Data CD? You may have a home CD player that can play data discs while the car player cannot...
tt2

DVD Studio Pro - Story for "Play All"?

I want to make a DVD with four videos on it. The user goes to the menu and selects either Video 1, Video 2, Video 3 or Video 4. When each video is finished, the user is returned to the menu.
I also want a "play all" button, so that the user can watch all four videos from start to finish.
This is what I did, and it didn't work:
I made a single track, and put all four videos on it. There was a chapter marker on the timeline at the start of each video.
I made a story that contained all four chapter markers. So the "play all" button worked just fine.
I also made buttons for each individual video. I targeted each button for its respective video. But when you select Video 1, it still plays all four videos. When you select Video 2, it plays 2, 3 and 4. And so on.
How do I tell it to play a single chapter, and not all the videos on the track?

Set the "End Jump" for each chapter story to return you to the Main Menu.
x

I have a typical 720x480 sequence in final cut that i've exported as a quicktime movie. I put it in DVD studio pro 4, made a simple menu, but it never burns correctly. How do I burn a simple one video DVD that actually has reasonable quality?

I don't understand why burning DVDs has so many problems.

There are a number of tutorials that might help you.
http://www.kenstone.net/fcp_homepage/first_play_warmouth.html
http://www.kenstone.net/fcp_homepage/basic_build_dvd_in_dvd_sp.html
DVD SP gives you a lot of control over the DVD authoring process. But with that, you also have the ability to make a lot of bad discs. iDVD will lead you down a narrow path. It will always make a disc that plays, but you have very little control or customization. If all you want to do is make a simple DVD that plays, then you might be better off with iDVD.

I am using DVD Studio Pro and every time I try to burn a sd dvd it is telling me my bit rate is to high. I am using the factory settings for sd 16:9. Why will it not burn my dvd?

Button Four

DVD SP will compress the video if you have not already. However, it is usually better for you to make use of Compressor and compress the video yourself. That being said, the usual reason for the bitrate being too high error is that the audio is causing it. In Compressor you need to also compress your audio to a AC3 file. Start with the Dolby 2.0 preset and make the following changes;
Change the Dialog Normalization to -31 dBFS, and under the Preprocessing tab, change to Compression Preset to None.

DVD Created with IDVD Will Play on Computer, But Not in DVD Player

I loaded some video into IMovie, then went to IDVD to create a DVD. It previews fine and the disk burned fine. I can play the disk back in the computer, but when I drop it in a Panasonic DVD Player, it won't play.
I've been burning for some time now and haven't had this problem before. Disks burned two weeks ago are fine, these are not.
I've tried a couple different brands of disks, it makes no matter.
I'm at a loss.

One of the limitations of iDVD 4 is that 'out of the box' it doesn't support the creation of disk image files - just burning to writable media.
Your problems sound to be high burn error related. With newer versions of iDVD you can create a disk image file out of iDVD and use Apple's Disk Utility to burn the image to writable media at a low (4x or lower) speed. This reduces the amount of burn errors. None of the iDVD versions prior to the current iDVD '08 had any provision for reducing the burn speed.
What brand of media are you using? (Maxell and Verbatim have good track records around here.)

Dvd will play on comp. but not on tv/dvd player? help

Hey,
i just started to learn how to use my mac/iDVD and I burned two DVd's without any issues and they played fine on my regular tv/dvd player. I had a basic image/audio for the background.
I made another DVD with a video for the menu background and more data on it-but it still was under 4.7 Gb of storage..etc. But I went to play it on my tv/dvd player and it says "incorrect disc" and will not read it,yet it will play fine on my Mac.
Any reason why this won't work vs. my other two that burned fine??
Thanks.

Did you burn it as an Audio CD or a Data CD? You may have a home CD player that can play data discs while the car player cannot...
tt2

I have downloaded my purchases and or digital copy pass codes to two different computers, both of which are authorized to play my purchases. but not all of my purchases are on either one computer. some are on this computer some are on that computer. why c

please answer my question. why cant i see or play all of my purchese on either one computer?

Use Edit > Preferences > Store to configure both computers for automatic downloads of your purchases. For past purchases go to the iTunes Store and click the Purchased link in the right-hand column.
tt2

HD DVD Authored in DVD Studio Pro does not play - any suggestions?

so i've built a hd dvd in dvd studio pro. here's the odd thing. once built, the hd dvd files sitting on a folder on my hard drive can be played by dvd player. but when i burn these files onto a disk using toast, the apple dvd player can't play them. and they don't play on any of my dvd players either. anyone ever run into this problem?

HD DVD required UDF 2.5. Not sure if Toast supports that. Burn with DVDSP instead. HD DVD required an HD DVD player as well.

DVD studio pro not playing entire video

When I use the simulator it only plays a portion of the video, and when I burn it to a DVD it stops at the same point. But both the audio and mpeg2 in the track play all the way through though. What am I doing wrong?

deadbeatpanda wrote:
So if the project is corrupt, does that mean I just have to re export my project in FCP? I used quicktime conversion and I read that it isn't recommended for exporting to be burned to DVD. I orginally tried to use compressor to get it to mpeg2 for DVD studio and what not so I compressed it again and the same thing happened. I also tried to use the share option in FCP with the DVD option but it exported for over 10 hours and was stuck at 5 minutes remaining for about the last 3 hours so I just cancelled it. This is the first time I have ever had to burn to DVD so sorry for being such a noob. And I have no menu, the DVD just needs to play automatically.
No, the clips do not automatically need to be re-exported. The issue with QuickTime is primarily a quality issue.
As Michael mentions above, the preferred workflow is "File: Export: Quicktime movie (NOT quicktime conversion) with current settings. Take this file into compressor and apply the appropriate dvd preset."
I like to think of the export as a "master" file that I use as a basis for transcoding.
I have little knowledge of the newer output options like Sharing. My experience has been that the things done to "simplify" the work usually compromise quality and frequently don't work well.
Here's an article on making an autp-play DVD:
DVD Studio Pro: Authoring a DVD that plays automatically without a menu

DVD Studio Pro 4 Dual Layer Disc Question - Can Files Be Moved from Top to Bottom Layer?

HI Everyone -
I have authored a dual layer DVD for a feature film with lots of bonus material. I put the layer break in the least intrusive spot where the frame is already still and there is little sound. Layer switch is fine. DVD plays as it should with no problems other than the expected pause during the layer break.
I'd like to have the layer break at a point much earlier in the movie, where it actually goes to black and silence for a moment - a spot DVDSP4 won't let me assign a layer break marker to. I do understand why.
DVD Studio Pro has the movie on the bottom layer of the DVD, I assume because that is the first track I created.
At this point, is it at all possible to move the tracks around where the bonus features take up most of the bottom layer so the less of the movie is on the bottom layer and I can move that layer break up (without completely re-authoring)?
Thank you for your time.
Joe Grisaffi
Houston TX

The fun continues...
The DVD Drive on my 10.6 machine seems to no longer be working...
Maybe this caused/contributed to/resulted in the earlier problem?
Anyone else experiencing similar issues? All hard drives and firewire drives seem to be functioning normally at this time.
My 10.5 machine appears to be eating through the DVD writing process successfully... slowly, but successfully

DVD Studio Pro Authored DVD plays on iMac, but not PC or DVD Player

Similar Messages

Maybe you are looking for