DVD Studio Pro does not work on Mavericks

Is there a way to install Mountain Lion on a partition I created?  I made a 101GB partition on my 750GB H/D.  I tried holding the C button down on starup but all I got was the panic screen telling me I had to shut down again. Am I doing something wrong or is there another solution that is eluding me?  I want to regain full functionality of DVD Studion Pro, that I lost when I installed Mavericks.

I have no such issues on my systems, we burn lots of DVDs. Description suggests something wrong with your DVD drive not the software or OS since neither Eric nor I can duplicate your problem.
bogiesan

Similar Messages

  • Dvd Studio Pro Serial Not Working

    Hi all,I recently had to replace my late 2005 G5 Powermac due to its inconsistency in powering up.
    Cutting the story short,I bought a second hand PowerMac which Ive been using for the past months with no problems,I re installed my Original compy of Final Cut Studio and everything seems to work fine,oly today Ive tried to burn a project on DVD with DVD Studio Pro 4 and it will not accept my original serial !
    Ive already tried deleting the FInal Cut System ID and reinserting the serial but no luck.
    Anyone had this problem before ? If not ,how could I claim Apple ?after all the original suite cost me back in its day around 1000euros.
    Thanks

    kkita75 wrote:
    Thats the version I have on my laptop,sorry !
    Well, there never was a Final Cut Studio 9. So I'm still confused. What version is listed on your disk?
    DVD SP shouldn't be asking for a serial number if the FCS suite was correctly installed.
    Download this utility and remove DVDSP (it will ensure that you get all the associated files). Reinstall from the install disks. Then run Software Update repeatedly until there is nothing more listed. Repair permissions in Disk Utility and launch DVDSP.
    I wouldn't be surprised if this fails to cure the problem. If it doesn't work, repeat the process and uninstall the entire suite, running Software Update, and so forth.
    Russ

  • HD DVD Authored in DVD Studio Pro does not play - any suggestions?

    so i've built a hd dvd in dvd studio pro. here's the odd thing. once built, the hd dvd files sitting on a folder on my hard drive can be played by dvd player. but when i burn these files onto a disk using toast, the apple dvd player can't play them. and they don't play on any of my dvd players either. anyone ever run into this problem?

    HD DVD required UDF 2.5. Not sure if Toast supports that. Burn with DVDSP instead. HD DVD required an HD DVD player as well.

  • Dvd studio pro does not burn readable dvds on other platforms

    I have DVDSP 4.1.2 and always used it to create DVD with content.
    Now after I upgrade to 10.6.4, I can burn DVDs but they are not readable on other platforms (PC or DVD Players).
    Thank you

    I have no such issues on my systems, we burn lots of DVDs. Description suggests something wrong with your DVD drive not the software or OS since neither Eric nor I can duplicate your problem.
    bogiesan

  • DVD Studio Pro does not play my background

    Hey guys,
    Has anyone ever experienced this problem? When I try to use a Quicktime movie as a background in my menu, it does not show up. Simulator will not play it, and watching a Video TS folder after a build does not show it. What is strange is that I see my buttons, but no background?
    The Quicktime I am using is an Animation codec, 29.97fps at 720 x 480.
    Anyone have any ideas? Thanks in advance.
    PS; When using a jpg as a background, everything shows up fine. It is just the quicktime movie.
    -Frank R.

    Perhaps is the animation file saved with an alpha channel (millions +)?

  • Buttons work in DVD Studio Pro, but not in DVD Player. Why?

    I recently upgraded I movie I made to Dual layer disk. I had already built one for a standard 4.7 dvd but now I was putting on a director's commentary so I need more space. So I opened up the original DVD Studio Pro project, thats worked fine for over a year, then saved it as "director's commentary", then simply changed the settings for a Dual Layer. In DSP the buttons on the first menu work fine. But when I build it and open it up in DVD Player the buttons dont activate. Even when you roll over them there is nothing there.
    Whats happening?

    You can find information on Reader Extensions on the developer center: http://partners.adobe.com/public/developer/livecycle/readerextensions/devcenter.html
    For help with the buttons to navigate, go into Designer help and search for "Attaching a database script to a button" (without the quotes) and this should provide you with the information that you need.
    Michael, is this where you found your information the first time?
    Catherine

  • Why do my dvds that i made in dvd studio pro don't work in a dvd player or a windows computer?

    Why do my dvds that i made in dvd studio pro don't work in a dvd player or a windows computer? I tried everything, and I watched so many tutorials after not succeeding. I read in another forum that it is common. Please help. I have already used about 20 discs trying to figure out what is wrong.

    >Can you please tell me again what the software is for me to convert the files from a DVD in order for me to edit the footage in Final Cut Pro?
    MPEG Streamclip (freeware): http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    Here's a tutorial from Nick Holmes on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
    -DH

  • Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

    Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

    Attached is screen shot. What happens is I go to File/Automate/Merge to HDR Pro, then select my 3 images, which are flattened psd files (I have tried tifs and jogs too), hit OK, it processes them, but instead of the image appearing, I get this black image. You can see my original images at bottom... jpegs too),

  • The sound on my Macbook Pro does not work.

    The sound on my Macbook Pro does not work.  When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done.  I went into system preferences, but there aren't any options there that I can see to change it. 

    "Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
    Au contraire. TS1574's title and affected products are thusly:
    "Troubleshooting issues with no audio from built-in speakers on Macs
    Products Affected Mac mini, MacBook, MacBook Pro, iMac"
    As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
    So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
    1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
    2. Remove any external audio devices from USB, firewire, etc.
    3. Open Sys Prefs > Sound > Output
    If Internal Speakers is listed, select it and test again.
    If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
    If mute is selected, unselect it.
    If the volume slider is low, raise the volume.
    If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
    I hope it gets resolved for you. Good luck.

  • Resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    See:
    * [/questions/777886]

  • I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
    Tell us what steps that you are taking to configure the Express and what happens after each step.

  • ICloud sync with MacBook Pro does not work

    I've installed iOS 5, updated Lion to 10.7.2, marked Calendar and Contacts sync in System settings for iCloud on my Mac. However iCal and Address Book sync between iCloud and Mac (MacBook Pro) does not work though there is no problem in syncing between iCloud and iPhone. Whether I create new event or contact, change existing one or delete existing one in iCloud this change is not reflected on my Mac and vise versa. I could not find a solution in this site or in forums.

    Yep, worked for me, too and now contacts and calendar seem to be syncing perfectly.  We'll see if it lasts.
    Thanks for your answer.

  • I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    what's creative cloud 6?  do you mean cs6?
    what version of acrobat pro do you have installed and what are you clicking to start it?

  • Mac Mail's smart mailbox's tagged-serach does not work in Mavericks.

    Smart mailbox's tagged-serach does not work in Mavericks.
    Tagged search such as "from:amazon OR from:yahoo" does not return any result in a smart mailbox. A strange thing is that it still works in the search box on the tool bar, but once the "Save" button is pressed to convert to a smart mailbox, it stops working.

    Smart mailbox's tagged-serach does not work in Mavericks.
    Tagged search such as "from:amazon OR from:yahoo" does not return any result in a smart mailbox. A strange thing is that it still works in the search box on the tool bar, but once the "Save" button is pressed to convert to a smart mailbox, it stops working.

  • Disk burning device of my macbook pro does not work

    hi
    the disk burning device of my macbook pro does not work from last night!!
    it don't eject and don't pick CD!!! it is off!!!!!
    in my macbook pro info see this messege:No disc burning device was found. If the device is external, make sure it’s connected and turned on.
    I reset my System management Controller:http://support.apple.com/kb/HT3964 But it don't right!!!!
    and i can not go to a apple support!!!! i'm in dubai!!!!! is here an apple support???
    it don't have any other way to solve this problem???????

    Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.
    If the hardware has filed there's nothing anyone here can do to help you ...

Maybe you are looking for