DVD Studio Pro doesn't run anymore, please help

After launching DVD Studio Pro an alert appears: "can't find Sequence BranFIN-00000029". Then it asks search or cancel and then the program stops running whatever I do, and needs a forced quit. The same happens again and again after restarting it, even after a hardware reset. What can I do? Thanks in advance. PR.

Can you launch DVD SP without clicking on a project? Looks like you used a reference movie in a project and part of it is gone. (In other words it is probably that one project and not DVD SP in general). Cancel should work. Have you moved files/deleted render files/swithced hard drives?

Similar Messages

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

Done but cant finish, DVD studio PRO wrecking my day. PLEASE HELP!

ok I am done, did a practice burn of one of my clips on the same settings. Project burned just fine and played in the DVD player. Earlier I was having problems it was only playing on my Mac.
NOW I get this message - The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
I am done with a project and need it to get out today, PLEASE HELP please please please. I have stayed up all night jumping through hoops and so close to finishing.

As in you're burning from DVD studio? you might wanna build your format as a .img to your hd then using disk utility or toast, burn that to disk.... or it could just be your optical drive :/

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?

Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.

How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                    "Configuration error
                       This software requires certain hardware or software which is missing
                                * AGP graphics Card"
If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
On the same note I also have DVD studio Pro 2 and that just quits without any message.
Hope any of you can be some help.
Thank you,
Doug

This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

DVD Studio Pro doesn't accept Compressor settings

I export to mpeg2 from my FCP file and when I import the file into DVD Studio Pro, the message comes up non supported file.
I end up using iDVD.
Would like to use DVD SP again.
What video and audio settings do I use for a 90 minute DVD?

Let's start with the settings you used in Compressor. Which did you use?
-DH

Compressor & Dvd Studio Pro not loving me! pls help.

Hi, so ive got a bunch of QT's that i want to put on a dvd. so i use compressor to make them mpeg2 (m2v) using the "DVD fastest encode 90 mins" (or the others) option. it does the work, but as soon as i drop them into DVD Studio Pro, it tells me that they are NTSC assets and thus wont read. How do i stop compressor from making them NTSC, and why the **** would it do so?
I never made them NTSC, but would like them to be PAL.
Any help would be seriously appreciated.
shot.

yeah thanks Luca.
i imagine that will work, it seems its a bit of a weird one. it only seems to go bad when im passing the converted files onto another mac with dvd studio pro. thanks for the help tho, ill let you know if i get sorted
cheers

SD DVD made in DVD studio pro doesn't work- please help!

Can't figure this problem out for the life of me - checked all forum posts available and nothing has helped. Hopefully you can help me solve this:
I made a SD DVD on a DVD-R (Verbatim 16x) with DVDSP 4.2.1 and it wont work on most DVD players - but - it DOES work on mac computers, Sony PS2, and some PCs with mpeg players.
The footage is 10 min. long (shot with DVCPRO HD 720p60) and imported as a .m2v video & .ac3 audio file using compressor (with the preset DVD Best Quality 90 minutes).
I had originally thought I made an HD DVD by mistake, but when I checked the file in DVDSP, all settings are marked SD; when opening the DVD in file manager, I also see that there are 2 bins VIDEO_TS & AUDIO_TS, so it can't be HD.
What am I doing wrong that it preventing this DVD from playing on most DVD players???? Please help!

In what way does it not work, is it not doing absolutely anything at all, is playback jumpy, something else?

My macbook pro overheats when running Adium, please help. (Pic included)

When I run Adium, the cpu usage goes over 160% for a while. This causes the computer to overheat, up to 102degrees C. I've redownloaded the latest Adium and reinstall. Still the same problem. Could this be software specific or is there any other causes? How can I troubleshoot this problem?

When I run Adium, the cpu usage goes over 160% for a while. This causes the computer to overheat, up to 102degrees C. I've redownloaded the latest Adium and reinstall. Still the same problem. Could this be software specific or is there any other causes? How can I troubleshoot this problem?

Jar file doesn't run properly, please help!

Hi everyone, i'm a student and i'm programming a game for my homework of AI subject. When i compiled the code from Eclipse, the game run smoothly, but when I create the jar file of the project, it appear blank when i run it. Here is the image:
[blank screen|http://c.upanh.com/upload/4/299/3L0.8429518_1_1.png]
and run from Eclipse:
[Run from Eclipse|http://c.upanh.com/upload/4/299/TL0.8429668_1_1.png]
I have followed the instruction of creating jar file in Eclipse properly, and now the trouble come. If anyone can show me how to solve this problem?
Thanks all.

I have all of e.printStackTrack( ) in my try - catch block. But i also think the blank screen appears because the class can not find my resources. Maybe it's my fault, because i create by hand a folder name "res" in project folder, then put all my resource in this folder. And in Eclipse when i try to get these resource, i wrote something like this:
     Image robot1N, robot1E, robot1S, robot1W;
     private void initResources() {
          try {
               String sb = "car1";
               robot1N = ImageIO.read(new File("res\\img\\unit\\" + sb +"_N.png"));
               robot1E = ImageIO.read(new File("res\\img\\unit\\" + sb +"_E.png"));
               robot1S = ImageIO.read(new File("res\\img\\unit\\" + sb +"_S.png"));
               robot1W = ImageIO.read(new File("res\\img\\unit\\" + sb +"_W.png"));
          catch(Exception e) {
               e.printStackTrace();
     }Maybe the string of path to resource is right in Eclipse but wrong in Window?

How Do I Use DVD Studio Pro Files In iDVD?

I had somebody create a DVD for me using DVD Studio Pro. (This was a compilation of many different videos.) It turned out great.
I now want to make a DVD of one of those videos on my own using iDVD '08.
I have the raw video/audio files. But, my problem is the raw files that were used for the DVD Studio Pro project are separated into one video file and one audio file. I don't know how I can get them both into iDVD. I was told that I have to recombine these two files into one file. But, how do I do this and still maintain the best quality?
(I am not a video expert by any means, but I can tell you that the video file is a ".mpeg" and the audio file is an ".ac3". When looking at the .mpeg file in the finder it lists its Kind as "MPEG Movie" and when looking at the .ac3 file in the finder it lists its Kind as "Unix Executable File".)
(I'm using iDVD 7.0.1 - I do have Quicktime Pro - I do not have the Quicktime MPEG-2 Playback component - I do not have DVD Studio Pro)
Thanks in advance for your help!

Q: How Do I Use DVD Studio Pro Files In iDVD?
A: You don't, essentially.
DVDSP is apple's top end app and it is intended to be used with FCP > Compressor > DVDSP. All of these are pro apps.
i-Apps are consumer apps all of which are QT based. With that in mind ....
now that doesn't mean you can't use FCP > iDvd. You can. But you have to do it in a way that iDvd will read all the files (meaning you must think in terms of QuickTime and export in this way). So when you export your QT File / Movie from FCP over to iDvd, it will look something like this hopefully regardless of the raw image & audio files you have already compiled which unfortunately will NOT work with i-Apps BUT will work with apple's pro apps which is the intended workflow / direction of said files in the first place.
Btw ... if your QT movie has chapter markers then please use the following settings so iDvd can read these markers. (if on the other hand you were looking to export this file to DVDSP; then you would choose DVDSP Markers.
Let me know if the above helps. If not, just come on back.

Importing 1080/24p sequence into DVD Studio Pro 4

Perhaps the answer here is as simple as "DVD Studio Pro doesn't do Blu-ray." In any event, I recently got a Sony HXR-NX5U, which, among its many functions, shoots 1080 at 24p, 30p and 60i. Following these instructions from Ken Stone (http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html), I was able to output a 1080/24p movie and burn it to the hybrid format he describes, which plays fine on my PlayStation 3.
However, when I try and bring the files that were created as a result of the "Share" command in FCP 7.0.3 (which are an ac3 file and an H.264 file), DVD Studio Pro will not recognize the H.264 video file and says that it is invalid. I'm assuming that the "Share" command creates these files via Compressor... if I'm wrong, please let me know.
However, if I just do a straight export of my 1080/24p timeline as a QuickTime movie, then DVD Studio Pro will accept the files, marking it with a "yellow" indictator, indicating that it needs to be processed.
What I'm wondering is... is there a way to export using Compressor so that DVD Studio Pro will accept the files? If I just do a straight export from the FCP timeline as a QuickTime movie and let DVD Studio Pro do the encoding, will it remain 24p?
Bear in mind I'm not trying to burn a blu-ray disc.
Thank you!

DVD SP does't do Blu-Ray.
If you have time to kill, do a search on the forum for hours of entertaining reading on this subject.
To create a DVD, use Compressor to generate the m2v and ac3 files needed by DVDSP to author a DVD.
Again, a search of this forum will turn up hundreds of threads - most of which are restating the process for authoring that is spelled out in the manual.
x

First few video frames 'stuttering' and then DVD Studio Pro hangs

Hi, I wonder if anyone can assist me with this problem...
I've been using Final Cut Studio for some time, with no issues with DVD Studio Pro. Now, whenever I import video assets into DVD Studio Pro, and then run simulate to see how the video will look, the first few frames of the video appear to 'stutter' and then jam on the screen; the audio keeps running fine.
Eventually DVD Studio Pro hangs-up and I have to use Force Quit to get out. If I don't simulate but just go-ahead with burning a DVD, the program still hangs.
When I view the same video in Quicktime, it's fine so it does not appear to be the video file...
Has something gone wrong with DVD Studio Pro, with it's preferences or something else? Any advice on what I should do? I can no longer burn DVDs because of this!
Thanks.
PowerMac G5 2GHz Mac OS X (10.4.3) 4.5 GB RAM

That's the problem, I can't get to the stage of actually building a DVD. I've attached assets, go to burn, and then the program hangs. If I view the video in simulate, it see that the few few frames are not advancing, just sort of hanging there, repeating pver and over, then it hangs. Viewing the video in QT it seems fine.
Help! Anyone seen this problem? What should I do, I have to burn a DVD for Monday! Thanks.

Exporting from Final Cut Pro for DVD Studio Pro

In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
Erin

The best and only format is mpeg2/m2v.
The encoding rate for video is based on the length of the sequence in h/m/s.
They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

Steps to exporting from FCP to Compressor/DVD studio pro

Hello,
I have just completed editing my video and would like to know the steps to exporting my video so that I can burn it on a DVD. I need help with the steps involved in exporting my project to compressor then to DVD studio pro.
Thank you for your help in advance!
p.s. on a separate note: I shot in 1080i and converted my raw footage to .mov format (640 x 480) to edit. Now that I'm done with editing, is there a way to bring the quality back up to 1080i?
Thanks!

http://discussions.apple.com/thread.jspa?messageID=12830379&#12830379

DVD Studio Pro doesn't run anymore, please help

Similar Messages

Maybe you are looking for