DVD Studio Pro - How to create a DVD playable on all mediums

I'm trying to create a DVD playable on all mediums, i.e Mac, PC, home DVD players. I have placed all assets in appropriate places etc, menus built correctly, end jumps etc set correctly. The simulation shows me what the DVD will play like on my mac, but when I burn (in HD mode using either DVD+RW or DVD+R DL) it does not play on PC or other DVD players, including my PS3 or XBOX360 any ideas why?

If you're in HD mode you're making a HD DVD. Search for info on it as there are lots of threads on here but basically you can only play HD DVD content (even if on DVD-R etc) in HD DVD Players. Not PS3, DVD Players and so on. If you have the (discontinued) 360 HD DVD drive add-on you can get the 360 to play it too.
If you want better luck you'll need to use SD DVD and search for tips on that.

Similar Messages

  • DVD studio pro how to resize background picture

    DVD studio pro how to resize background picture? I want my photo be a background but cant find how to resize it to fit the screen.

    Hi Miron,
    You are best off taking the image into Preview or Photoshop and resizing it to match your framesize. You could use a button and resize that but it is not economical or pretty.
    Pi

  • How to create full new user with all privileges

    how to create full new user with all privileges?
    and how to delete existing users?
    Thanks in advance..

    Common solution is probably to use sudo for privilege elevation, wiki should help

  • DVD STUDIO PRO - How to make chapters loop?

    Hi
    I'm trying to create a DVD and my last problem I'd like to resolve before the final burn is:
    Is there a way to make the Chapters in my Track Loop?
    My scenario: I have 5 Chapters Total. In my Chpater Menu I created 5 Buttons so you can jump straight to 5 Chapters. But let's say for Button 3 (Chapter 3), when I activate/play it, if I hit SKIP FWD I can skip to Chapter 4, & 5, BUT if I hit SKIP BACK it stops at Chapter 3 (which is where I started - Button 3).
    Is there a way for me to set it so that if I hit Button 3-Chapter 3 from the Chapter Menu - I can access Chapter 1&2 by hitting Skip Backwards while the track is playing? The only way I can think to resolve this is to add Chapter 1&2 after Chapter 5 in my Story List but that means I can only hit Skip Forward and it will eventually stop skipping forward once it hits Chapter 2. So is there a way to loop it???
    Sorry I hope I explained it decent enough for you guys to understand
    NEED HELP ASAP!!! Trying to finish for a client this weekend! :

    Yeahhh so it took me giving up and just burning to DVD and playing it in an actual DVD player to realize that the DVD Studio Pro does its "behind-the-scenes" magic and will have that function automatically figured out for the DVD Player. DO NOT rely on the simulation feature...geez...problem solved.

  • How to create shortcut desktop icon for all users???

    Hello All,
    I want to know how to create shortcut icon for all users in windows 7. I tried C:\Users\Public but no folder for Desktop.
    Thanks

    C:\users\All users
    JS
    Hi,
    I am just wondering, what is the technically correct location to place say, a shortcut, for all users to access on their desktops on a given machine?
    Is it C:\Users\Public\Desktop ?
    Or is it C:\Users\All Users\Desktop ?
    Would it also be possible to explain the differences as well? Or paste some links to the overview of each one? I am having trouble finding anything from MS.
    Thank you.

  • How to create a report to bring all data from two different Info providers

    Hi All,
    I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
    Here is an example
    DSO Contents:
    DocNum-     DocItem-     DocText-     Amount-      Quantity
    10000----     10----            ABC----          100----           10
    10001----     20----     DSN----     200----     10
    10005----     20----     DSN----     200----     10
    Z1003----     10----     CAN----     500----     1
    Cube Contents
    DocNum-     DocItem-     Date-----          InvoiceAmt
    10000----     10----     1/10/2009----         50
    10001----     20----      2/20/2009----        100
    10005----     20----      2/25/2009----        100
    The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
    DocNum-     DocItem-     DocText-     Amount-      Quantity
    10000----     10----     ABC----     100----     10
    10001----     20----     DSN----     200----     10
    I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
    Thank you all in advance and i would really appreciate for your suggestions.
    Regards
    Chinna
    Edited by: chinna2479 on Mar 3, 2009 7:38 PM
    Edited by: chinna2479 on Mar 3, 2009 7:39 PM

    Hi chinna,
    Two possible options, I can think of now, but both of them may be a compromise with performance.
    1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
    2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
    Use this navgntal attr for selection in your report.
    Let us know, if you require any further info.
    Naveen.A

  • How to create an entry hub to all task flows

    I have created a bunch of bounded task flows and want to create a" home" page from which I can access all of the bounded task flows. How can I do this? Thank you.

    I think you can do that , as :
    Create a UnBounded taskFlow with a Home.jspx and create a menu in this Page with the task flow you defined, ( Drag and Drop your task flow into the Home.jspx as Button, link or a other User Interface )

  • How to create a target group with all prospects?

    Hi guys,
    I am wondering how do I have to set up my data source when I would like to build a target group in my segment builder which includes all persons/contacts/organizations with the bp role prospect?
    Which infoset do I need to choose in my data source? What do I need to fill under details?
    Thanks a lot for your help.
    Best regards,
    Janine

    Hi Janine,
    What I could understand is that you require to create target group of all BPs having BP role as prospects.
    To do so, you can create an infoset joning tables BUT000 and BUT100. The table BUT100 , has a field "BP Role"->select it, so that it is available when you are creating the attribute list using this infoset.
    Create a data soucre for this infoset. Then when creating a attribute list, include this datasource and under this select the attribute "BP Role". Add filter to this attribute for prospects.
    This filter can be used in segmentation builder in UI to create TG containing BPs having BP role as prospect.
    Hopes this helps you.
    Thanks,
    Apoorv

  • How to create multiple expanding outlines with all points equal distance to original shape?

    Here's an extremely simple example.. It works with a circle or a square, obviously because it has the same height and width. The problem is when you have irregular shapes, (or in this case, an oval). I know I've seen solutions to this in the past, but I just can't think of how to word this question and find them again.
    I know you can create multiple strokes for an object in the appearance palette, but I'm looking for something more effective than just having colored stroke > white stroke > colored stroke> white stroke > etc.
    Here's a couple examples of the kind of effect I'm looking for.
    Any help would be greatly appreciated.

    You need to use Offset path. Object>Path>Offset path. Use negative numbers to go inside of an existing shape, positive to go outside.
    [ signature removed by forum host - advertising is not permitted ]

  • How to create a document/report on all objects in the BW system?

    Hi,
    The requirement in our company is to create a document/report with the list of all the objects that exist in the BW system for various applications. This list should contain the technical details of the different objects and where an object is used, what's the source for the object etc. The information should be similar to that in the Metadata repository but it should be one single document/report which includes all the objects.
    I tried using the 0TCTBWOBJCT info object (content browser) but it was not of great help.
    Can anyone help me out in this task?
    Thanks,
    Anu

    Hi,
    Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
    Hope it helps
    bhaskar

  • LSMW me51n, how to create one PR document for all the records in the  file

    HI all,
    I need to create LSMW for t-code me51n -Create Purchase Requisition. I`m using Bapi BUS2105, method CREATEFROMDATA, idoc message type PREQCR, basic type PREQCR03. The problem is that the LSMW is creating different idoc and different PR document for every record in the source file. My requirement is to create one PR document for one source file (Every source file is different Purchase Requisition) . I`m trying to do this with writing some code(global functions ) in the 'Mapping and conversion rules'  events - BEGINOF_TRANSACTION_, ENDOF_TRANSACTION__..., but i`m not very sure what exactly i`m doing .
    Please help me resolve this problem, any help will be appreciated .
    Best regards, Emil Milchev.

    Thank you for you answer.
    But I have found faster way of doing it - two source structures, one HEADER and ONE ITEM.
    HEADER: one empty text field and identificator for it.
    ITEM: everything else.
    Then everything was just fine, i`ve mapped the different IDOC segments by PREQ_ITEM fields (equal values in the source file : 10-10-10..., 20-20-20,.... etc.) and put all required fields for my LSMW
    SOURCE FIELDS:
    Z_ME51N_V2 - MASS_UPLOAD - CREATE create
    Source Fields
    UPFILE                    upload file
                IDENT                          C(010)    ident
                                               Identifing Field Content: header
                TEXT                           C(001)
                UPFILE2                   123
                    IDENT                          C(010)    ident
                                                   Identifing Field Content: item
                    BSART                          C(004)    Document type
                    BANFN                          C(010)    Purchase requisition number
                    BNFPO_FOR_MAP                  N(005)    Item number of purchase req. for MAPPING acc.
                    BNFPO                          N(005)    Item number of purchase requisition
                    KNTTP                          C(001)    Account assignment category
                    PSTYP                          C(001)    Item category in purchasing document
                    MATNR                          C(018)    Material Number
                    WERKS                          C(004)    Plant
                    LGORT                          C(004)    Storage Location
                    MENGE                          N(013)    Purchase requisition quantity
                    EKGRP                          C(003)    Purchasing group
                    KONNR                          C(010)    Number of principal purchase agreement
                    KTPNR                          N(005)    Item number of principal purchase agreement
                    LIFNR                          C(010)    Desired Vendor
                    FLIEF                          C(010)    Fixed Vendor
                    AFNAM                          C(012)    Name of requisitioner/requester
                    PREIS                          AMT4(011) Price in purchase requisition
                    ABLAD                          C(025)    Unloading Point
                    WEMPF                          C(012)    Goods Recipient
                    PS_POSID                       C(024)    Work Breakdown Structure Element (WBS Element)
                    KOSTL                          C(011)    COST_CTR v bapito ?
                    NAME1                          C(040)    Name1 - Name of an address
                    NAME2                          C(040)    Name2 - Name of an address 2
                    STREET                         C(060)    Street
                    DELIVERY_DATE                  C(008)    Date on which the goods are to be delivered
                    TEXT                           C(132)    item text
    STRUCTURE RELATIONS :
    Structure Relations
    E1PREQCR              Header segment                                               <<<< UPFILE  upload file
               E1BPEBANC             Transfer Structure: Create Requisition Item                  <<<< UPFILE2 123
               E1BPEBKN              Transfer Structure: Create/Display Requisition Acct Assgt    <<<< UPFILE2 123
               E1BPEBANTX            BAPI Purchase Requisition: Item Text                         <<<< UPFILE2 123
               E1BPESUHC             Communication Structure: Limits                              <<<< UPFILE2 123
               E1BPESUCC             Communication Structure: Contract Limits                     <<<< UPFILE2 123
               E1BPESLLC             Communication Structure: Create Service Line                 <<<< UPFILE2 123
               E1BPESKLC             Create Comm. Structure: Acct Assgt Distr. for Service Line   <<<< UPFILE2 123
               E1BPESLLTX            BAPI Services Long Text                                      <<<< UPFILE  upload file
               E1BPMERQADDRDELIVERY  PO Item: Address Structure BAPIADDR1 for Inbound Delivery    <<<< UPFILE2 123
                   E1BPMERQADDRDELIVERY1 PO Item: Address Structure BAPIADDR1 for Inbound Delivery    <<<< UPFILE2 123
               E1BPPAREX             Ref. Structure for BAPI Parameter EXTENSIONIN/EXTENSIONOUT   <<<< UPFILE2 123
    MAINTAIN FIELD MAPPING AND... :
    the MAPPING between two IDOC`s segments:
    In first segment:
    E1BPEBANC                      Transfer Structure: Create Requisition Item
             Fields
                 PREQ_NO                      Purchase requisition number
                                     Source:  UPFILE2-BANFN (Purchase requisition number)
                                     Rule :   Transfer (MOVE)
                                     Code:    E1BPEBANC-PREQ_NO = UPFILE2-BANFN.
                 PREQ_ITEM                    Item number of purchase requisition
                                     Source:  UPFILE2-BNFPO (Item number of purchase requisition)
                                     Rule :   Transfer (MOVE)
                                     Code:    E1BPEBANC-PREQ_ITEM = UPFILE2-BNFPO.
    In second segment :
    E1BPEBKN                       Transfer Structure: Create/Display Requisition Acct Assgt
               Fields
                   PREQ_NO                      Purchase requisition number
                   PREQ_ITEM                    Item number of purchase requisition
                                       Source:  UPFILE2-BNFPO_FOR_MAP (Item number of purchase req. for MAPPING
                                       Rule :   Transfer (MOVE)
                                       Code:    E1BPEBKN-PREQ_ITEM = UPFILE2-BNFPO_FOR_MAP.
    After that everything was OK .

  • How to create a default profile for all users in Firefox 9.

    I run a computer lab, and am looking for a way to create a default profile in Firefox 9 that new users can use. I want them to be able to launch Firefox for the first time, and see my homepage. I want to disable any check for default browsers, firstrun pages, or any other prompts.
    The old .adm files for group policy don't seen to be working any longer.

    See http://www.frontmotion.com/Firefox/howtodeploy.htm
    You can create a defaults\profile folder in the Firefox program folder and place files in it to be used to create and initialize a new profile.

  • How to create a report to monitor all the reports created in the system?

    Hi all,
    i need to create a new query where i can get all the information about the web intelligence files in BO, i need in particular both the title and the description, in fact it's my intention to put in the description the technical name of the bex query, is it possible to do this with the auditor DB?
    Thanks
    Stefano

    Hi Stefano,
    I would agree with you. One thing that may halp is that you can get the SQL details from the document refresh action. This might provide the technical details you need
    Regards
    Alan

  • How to create a global property for all the reports in Oracle BIP

    Hi,
    I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
    If(bproperty)
    else
    I do not want to have a property for each of the reports but this should be a global one for all the reports.
    Please help. Your help is greatly appreciated :)
    Thanks,
    Karthik

    Hi,
    I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
    If(bproperty)
    else
    I do not want to have a property for each of the reports but this should be a global one for all the reports.
    Please help. Your help is greatly appreciated :)
    Thanks,
    Karthik

  • How can create report to get the all SAP transactions available to CSRs

    Hi,
    The user like to have the format of report as follows:
    SAP transactions      Transaction desription     CSR 1     CSR 2     CSR 3      u2026etc.
    VA01                                     order entry      Yes     No     No     
    VA02                                     order change     Yes     No     No     
    VA03                                     order display     Yes     Yes     No     
    u2026etc.                    
    ( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
    1) I think CSR means Customer Service Representative, where it is residing means in which table ?or How can I get CSR1,CSR2.....?
    2)How can I get the all SAP transactions available to CSRs ?(first column)
    3)How to find the which transaction is available to CSRs ? so that I can mark it is as Yes else NO

    I am not able to show the correct format as all get mixed when I post thread:
    SAP transactions  Transaction desription CSR 1 CSR 2 CSR 3 u2026etc.
    VA01                                  order entry     Yes    No           No
    VA02                                  order change  Yes    No         No
    VA03                                  order display  Yes    Yes        No
    u2026etc.
    ( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
    First column is Sap transactins,
    second column is Transaction description
    third column is CSR1,
    fourth column is CSR2,
    and soon.
    In the first column I need to display list of all sap transactions available to CSR,
    In the second column I need to display the transaction description
    from third onwords I need to display CSR1
    in fourth CSR2 and soon .
    Please let me know for any questions,I appreciate for the reply .

Maybe you are looking for

  • Primary index and secondary index in a select query

    Hii, How to use a primary or secondary  index in a select query?  How does this indexes actually work? Moderator message: please search for available information/documentation. Edited by: Thomas Zloch on Jan 21, 2012 8:38 PM

  • How do I boot with a certain user in-control?

    Duh.  Maybe I am suffering a lapse mentally.  But my question is my Subject, please:  "How do I boot with a certain user in-control?"  I set Users as I want, then I re-start, but I use the older user, still.  So I feel perplexed, which is not good. 

  • IPhone 5 unable to verify account information

    I use iCal for my calendar.  I have an iMac and Ipad2 which both connect to the server just fine.   My new iPhone 5 (which has the same user name, server information and password) as my iPad2 will not verify account information.  I have added the opt

  • Looking part time job or project.

    Hi, I am Labview certifier Developer(CLD). and I am looking part time job or project. If any one intreast ,so please mail me on [email protected]  Thanks labview.solution

  • How to customize shortcuts in Encore DVD 2.0?

    Hi! I need to customize some shortcuts because i am using a keyboard with a Swedish layout. If i press Ctrl+; to show guides on a menu the menu zooms out... In "C:\Program Files\Adobe\Adobe Encore DVD 2.0\Required" there is a file named keymap.xml th