DVD STUDIO PRO: Menu Button does not work when in Simulation mode

How can I make the MENU BUTTON work when I am playing my DVD in SIMULATION MODE? Right now nothing happens when I click on it. I want to make sure it works for the user.
Thanks

Not sure I understand. Are you talking about the menu button on the remote control? If so, I think you need to check the inspector for the disk in dvdsp and make sure the correct menu is selected for this button. The behavior of the menu button can be a little tricky. If I remember correctly, it usually toggles between the menu and the track.
If you're talking about a button you've created on a menu, select the button and set the target in the spector.

Similar Messages

Since upgrade to v29, pinned tabs don't appear and sometimes all tabs don't appear and open menu button does not work

My pinned tabs don't appear at any start and at some starts, I don't see the bookmarks toolbar (I can restore that by removing it from view-toolbars and then reselecting it). when this happens, FF also does not show any tabs and the Menu button does not work.
I have tried various suggestions found on here like deleting the sessionstore.js and re-installing FF, also tried disabling hardware acceleration in safe mode and still have the same problems.
Am reluctant to reset FF in case I lose my favourites and Bookmarks, is there anything else I can try?

Firefox may not have closed properly.<br />
You can try to update to Firefox 29.0.1 to be released tomorrow (Friday) to see if that helps with this issue.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs

"Add to Shooping cart" button does not work when changing Product Category

Dear all, we are running SRM 4.0 Classic scenario and we have a strange problem with Product Category field. When click on the "Describe Requirement", it opens the shopping cart page with the Product Category field and the default value is coming from favorites. As long as you dont change this value , enter the other fields and click on the "Add to shopping cart" button, then it works. If the users try to change this value on this page to select a different value from the drop down, then the "Add to Shopping Cart" button does not work. Has anyone encountered this problem before. Users are getting frustrated with this behaviour. Any help to fix this issue is appreciated. Thanks in advance.
Regards
Gabriel Bertrand

Dear Disha, this is what is the behaviour.
Suppose, if for a particular user, there are 4 items listed as favorites in the Product category and one of them is a default value. If you don't make any changes to this value and then click on Add to Shopping Cart, it works. If you try to select a different value other than the default from the favorites, then the Button does not do anything.You click on it nothing happens and cannot go to the next page. Also all the links are disabled (ie Describe Requirement / Old Purchase Order and Template)
If we dont change the value for Product category and go to the next page (with default value) and then change the Product category here, it works (Continue button works and were able to Order or Hold).
Thanks
Regards
Gabriel

DVD Studio Pro 1.5 Previewing Not Working

Hello! I don't know if anyone can help me with such an old application, but I got it for free so I'm trying to make it work.
Anyway, I used to use DVD Studio Pro 1.5 on my Titanium PowerBook, and it worked fine then, but I think that ever since I put it on my MacBook Pro (Santa Rosa, non-unibody) with OS 10.6, it seems to have some issues. I am able to build a DVD menu, but for some reason, I can't use the Preview button. Here's a link to a screenshot with the problem:
https://files.me.com/jgilbertproductions/nymyz3
Hopefully someone can help with this. It's really bothering me that I can't use DVD Studio Pro. I love it, and I wish it would work. I think it's just probably too old for my MacBook Pro and Snow Leopard, but it's worth asking around. Thanks so much for looking!
—Tommy

Absolutely what StudioX said - this is because you are now using Intel processors, and the code for DVDSP1.5 runs on Power PC chips.
You either need to keep that titanium running, or upgrade to a later version of DVDSP.
FWIW I have a copy of 1.5 running on an old G4 Quicksilver desktop. I have no reason to use it at all... it was (is) buggy in places and uses obscure methods, but I love it, so I keep it

MY MENU BUTTON DOES NOT WORK! ah!

I've had my ipod photo 30GB for about 5 months and i love it..i have about 2500 songs on it and i was listening to it yesterday and no matter how many times i pressed menu..it wouldn't go back to any of the other screens. all the other buttons worked fine, but the menu button wouldn't work!! now i know my ipod would still be under warranty, but i don't even know how to go about doing that. is there something i send in? or print out? or do online? and besides the warranty..is there a way to fix this menu button problem?? please help me!! thankk youu =)
~Rachel

No, a Reset is just like rebooting your PC - all your data will still be there. Now, a Restore will wipe your iPod, but you probably won't need to go that far.

After update menu button does not work

tried a restore that does not work.. tried the five r's nothing has helped
worked fine then updated now doesnt not work.. flicking hold from on to off now does what menu used to do and goes a page back..

lol i update with the newest software for my mini then the software makes my menu key no function.. i GET ZERO HELP and they want me to pay 229 for repairs thats just to priceless

Help my menu button does not work at all

it won't work the menu button doesn't work
Windows P.C Windows XP

Welcome to Apple Discussions!
Try these...
Resetting iPod
Restore the iPod
If those do not help, then it is a hardware problem. Your iPod may need service...
iPod Service
btabz

Form button does not work when a program is moved from Windows 8.2 to Windows 7

Hi,
I have a few Excel programs which use the ODBC to get data from Access and which have macros which writes data to an external program, MYOB.
When the macros tries to write the data to MYOB it fails if I am not running the program in administrator mode.   It seems that Windows 8.2 has a different level of security than Windows 7 and must be run in administrator mode for the ODBC to work.
I have had issues after running the program in administrator mode (testing) if I simply do a save (in administrator mode) and then send it to the customer.   The issue is that it just will not work on the customer's site.   I have gotten
around this in the past by saving any changes, going back out of excel, loading the program again (not in administrator mode) and saving it - before sending it to the customer.   This worked until now.
For some unknown reason, the last time I sent a program to the customer and carried out the above process, the program stopped working. Originally I thought that the macro just wouldn't work on windows 7, but eventually found that it is the form button
that will no longer work when the program is moved from 8.2 to 7.
Does anyone know why there is an incompatibility between 8.2 and Windows 7 and what I should be doing to ensure that my programs work in my customers environment(windows7)?
In the meanwhile, I have changed the form button to an activex button and the program works fine in both environments.
Thanking you in advance,

there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
try to
Close Excel
Start Windows Explorer.
Select your system drive (usually C:)
Use the Search box to search for *.exd
Delete all the files it finds.
Start Excel again
Open that file and save it, and try open at Windows 7
to get more detail about this issue, I suggest also contact Office forum
this case also will be solve installing kb3025036
good luck

Captivate 7 exit button does not work when published to LMS

I recently published a course using Captivate 7 and uploaded it to our LMS. During the review of the course it was noticed that the Close or Exit button on the controller did not work in IE. However, it did work in Chrome.
I have looked through this forum and found that there were similar issue with older versions of Captivate. However, we have course published with Captivate 6 on our LMS in which the Close or Exit button does work.
Does anybody have a solution for this problem? Do we know if there is an update scheduled to fix this problem?
Please let me know
Dawn

1. Create a button in Captivate and assign a javascript call to "MyExit()"
2. Create a .js file called CourseExit.js.
3. Place the following code into that file.
function MyExit()
var SD = window.parent;
if (blnReachedEnd == false && confirm("Would you like to save your progress to resume later?")){
SCORM2004_CallSetValue("cmi.exit", "suspend");
SCORM2004_CallSetValue("adl.nav.request", "suspendAll");
else{
SCORM2004_CallSetValue("cmi.exit", "");
SCORM2004_CallSetValue("adl.nav.request", "exitAll");
Unload(true);
4. Place the CourseExit.js into the "assets/js/" in the published folder
5. Add "<script language="JavaScript1.2" src="assets/js/CourseExit.js"></script>" to the html file that was output on the publish.
I was able to set this up on the set up files on the local hard disk but so all I had to do was create a button and add the "MyExit()" code to the button, but when the next update came out it reset the hard disk files. So, I have just resorted to updating the output file as seen above.
Hope this helps.
Garrett

The menu button is not working on my iPod Nano

I cannot get back from anywhere. Once I have seleceted a track to play, the menu button does not work so that I cannot get back to all music or to choose other options such as radio. It does not make a click sound. It works occaisionally (once a week). Any ideas? Anyone had this problem before?

Hey Nick Norway,
Thanks for the question. Let’s see if we can isolate your issue further to determine if it is hardware related. Have you attempted to reset your iPod? If not, definitely give that a go:
How to reset iPod
http://support.apple.com/kb/HT1320
If you are unable to reset your iPod, please attempt to restore it with iTunes.
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
If your issue persists after the restore, your iPod may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/ipod/service/faq/
Thanks,
Matt M.

Browser Go button / "More" button does not work

Within the browser the Browser Go button / "More" button does not work
When I tap it the highlight appears above it... but nothing happens.
I upgraded the OS today and that didn't fix the problem.
I have to use google to browse to a different url... incredibly frustrating... solution?
With further testing I've found that if I load a new tab nothing happens... if I then reselect that new blank tab I can then enter in one url of my choosing and it will load... after that the tab from a Go button stance is dead again. No matter what I do I can get the 'three button' more button to work.
Help Please!
Tudor

Hey tudorwhiteley,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Does this happen to all websites? Also what version of BlackBerry 10 are you currently running? This can be found by going to Settings>About.
If you remove the battery and place it back in and then access the browser, are you able to replicate the issue?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I have website that on the Home page and the home only. When opened in Chrome or Safari the last 3 menu buttons do not work.

I have website that on the Home page and the home only. When opened in Chrome or Safari the last 3 menu buttons do not work. But work fine in Explorer and Firefox.Its weird. The site is baystatewiring.com see if you have the same problem. Does anyone have a idea?

Code errors could explain the problem. You're missing a closing </div> tag for container.
[Invalid] Markup Validation of http://baystatewiring.com/index.html - W3C Markup Validator
Try changing your link CSS from display: inline to display: inline-block.
Nancy O.

My 'Menu' button will not work. How can I fix this?

The menu button will not work.
Is there anything I can do myself to fix this problem?
It works occasionally, but mostly does not work.
Thanks

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TS2771 my ipod touch home button does not work how do i fix this?

my ipod home button does not work. How do i fix this?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

DVD STUDIO PRO: Menu Button does not work when in Simulation mode

Similar Messages

Maybe you are looking for