DVD Studio Pro must be serialized before using...?

I keep getting an error when I try encoding using QT and A.Pack. The error reads "DVD Studio Pro must be serialized before using A.Pack/QT." I have legit software and I've registered my software, but this error keeps popping up and it's a hassel when I need to rush on projects. I'm using compressor, but for certain projects I like to use QT for encoding...please help!!
MB

Have you just opened DVD SP and re-entered the serial number?
If not then do so, if DVD SP isn't installed then install it, then open it and input the serial number, that's all it's asking for.
The Mpeg 2 encoder is part of the DVD SP's install and activated when DVD SP is launched and serialized.

Similar Messages

DVD Studio Pro must be serialized first......

OK.... this is super bizarre. I've used Quicktime to export MPEG-2's for time beyond memory. However, we purchased an additional license of FCP Studio.... so I deleted all the ID files off of this machine and entered the newer serial number when I was prompted.... serializing all of my FCP Studio apps. Now whenever I try to export MPEG-2 files out of Quicktime I get this oh-so-lovely error:
DVD Studio Pro must be serialized first in order to run Quicktime MPEG Encoder.
Isn't that grand?
Now I realize that I could go through the painful and very lengthy steps of finding all of the FCP Studio files, preferences, support files, etc. and chucking them.. and then go through the nice, lengthy 2 hour install and put everything back on... however, I see this as very un-Maclike... has Apple truly made the FCP Studio ownership experience this tedious? This reminds me oh so much of my.... ahem... Winbloze experiences.
Anyone have a solution for this besides doing the standard solution that Windows users have to go through when something breaks? (aka reinstalling bloody everything and hoping to **** that it actually works?)

Have you just opened DVD SP and re-entered the serial number?
If not then do so, if DVD SP isn't installed then install it, then open it and input the serial number, that's all it's asking for.
The Mpeg 2 encoder is part of the DVD SP's install and activated when DVD SP is launched and serialized.

DVD Studio pro must first be serialized in order to use MPEG encoder...

Hey. I recently got DVDSP4. I was using the much older DVDSP1.5 without any problems.
anyway. My problem is, whenever I try to export into an mpeg2 file it gives me this lame serial message....
"DVD Studio Pro must be serialized first in order to run Quicktime MPEG Encoder"
I did a search, and it seems others have ran into this same problem. but there was no solution that I read....
I have quicktime pro 7, but am editing with the very old final cut pro 3.
however, even exporting into a seperate .mov and quitting FCP3 all together, and just trying to export directly from quicktime does not work.
is there any straight answers for this problem? other people have encountered it too obviously....
please help....

Since you have DVDSP4, I don't understand why you can't just use Compressor rather than exporting MPEG2 from QT Player.

IDVD and DVD Studio Pro

Is there a way to import a theme from iDVD into DVD Studio Pro? I want to use a theme on iDVD called Revolution, but in iDVD it only has one drop zone for pictures. I have seen this theme used with multiple pictures so there has to be a way to do it. I was wondering if you can somehow get that template into DVD Studio Pro for more customization options.

Importing iDVD Projects and Themes:
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5.
In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import:
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations. If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects:
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into
DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro user manual.+

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

IDVD Templates in DVD Studio Pro?

Hey everyone! Just wondering if it's possible to import either a project or template from iDVD into DVD studio pro? Love DVD Studio Pro and would like to use the templates in iDVD in DVD Pro. Thanks...

http://discussions.apple.com/thread.jspa?threadID=385969&tstart=0

Should I use Compressor 4 before sending over to DVD Studio Pro

I am making a FCP X movie and when it's finished I want to put it on a DVD using DVD Studio Pro. I have done this before but now I'm wondering if I should first export it to Compressor 4 and then to DVD Studio Pro. I understand that if I was puting it on YouTube or an iPod device I would need to Compress it however why would I need to go to Compresss 4 first if ultimately going to DVD Studio Pro? Would I get a better Codec quality then what I get from exporting in FCP X using their default Compression format i.e. Quicktime? Should I use an Apple ProRes Compression from Compressor 4? I guess I really don't understand the encoding quality options very well however I do want the best quality on my finished DVD. The DVD or Sequence is somewhere around 20 - 25 minutes if that makes any difference in your response.

This is (at least) a triple post. It's best not to ask the same questions multiple times in multiple forums.
Russ H

How can I reinstall Motion/DVD Studio Pro using my new serial no.

I used to have my office copy of Motion on my computer. Now that I got my own I want to reinstall it. But whenever I did that I still have the same Motion/DVD Studio Pro as was installed with the older serial no.
How can I get rip of this old serial no so I can use my new serial no?
Any help will be much appreciated.

http://docs.info.apple.com/article.html?artnum=303184 Trash the files... then re-enter the serial number with new one when asked.
Jerry

Using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Using Qmaster with DVD Studio Pro OR Qmaster requires FCP on all machines?

Greetings everyone,
After a few days of tinkering I've finally managed to set up a managed cluster. However, I have a problem (surprise, surprise). When I submit a job to the cluster, Final Cut Pro suddenly opens up on all of the computers being used. I have Final Cut Studio 2 under an academic license, and all copies report that there is another copy running with the same serial number and that they must shut down. They render a few frames before suddenly quitting the job, regardless of whether I leave the message up or OK it away. I've done some reading from this thread which makes it sound like all systems must have a copy of FCP installed, or to use a slightly different method:
http://discussions.apple.com/thread.jspa?threadID=375923&tstart=195
It's a bit upsetting as I'd originally read that systems could aid in rendering with just QMaster installed, and that they didn't need FCP installed. Hence, having FCP open up was unexpected, and I get the feeling that uninstalling FCP from those systems wouldn't help me.
But let me explain what I do normally, and perhaps some of you can guide me.
My work has me converting hundreds of tapes to DVD. Without QMaster, I would import the videos in Final Cut Pro, set chapter markers and in and out points, and then export the video (with barely any processing - an export typically takes 4 minutes on a dual 800 Mhz G4). I'd then import it to DVD Studio Pro, handle the menus, and then do a build and format. That process would take ~2-3 hours per DVD, and that is the part that I'd like to optimize.
The setup is such that I have one dual G5 wired to our hard drives (all Firewire 800), and then four other systems that connect to the G5 to access the HDs through a gigabit network switch. This has worked quite nicely in that it allows systems that only have Firewire 400 to work at Firewire 800 speeds regardless.
I'd originally thought that DVD Studio Pro 4 would automatically be able to process jobs through Qmaster, but I couldn't find a setting for it and it didn't seem to do it on its own. Instead, I was planning to redo my work flow such that the encoding of the video (the most time-consuming part of DVD Studio Pro's build procedure) would be done in Final Cut Pro. Or more specifically, it would go through Compressor. However, as I mentioned above, attempting to work this way causes Final Cut Pro to open up on all nodes within the cluster. As they all have the same serial number, they become unhappy under such conditions. I can uninstall them from the systems as I only ever use one copy at a time anyway, but as I mentioned from the link above, it seems that rendering through FCP -> Compressor will require FCP to be installed on all participating systems.
Does anyone have any advice for what to do? Is there a way to get around having FCP activate on all participating systems, or is there a way to do it directly through DVD Studio Pro (ideally in a manner that wouldn't cause DVD Studio Pro to activate on all participating systems)?
Any advice is much appreciated. The distributed encoding is really the only reason why we upgraded to Final Cut Studio 2, so I'm going to feel rather foolish if this doesn't work out.

A QCluster network isn't designed to distribute Rendering from FCP, rather it's designed to distribute encoding tasks.
As mentioned in that thread you linked to, the best workflow I can think of in your situation is to export Quicktime reference movies from FCP, then bring those reference files into Compressor for distribution to the QCluster for the transcode to MPEG 2 for DVD. There is a wealth of good information in that thread.
In short, if you attempt to use a Cluster to export from FCP, then all of your nodes will need to have separate licenses of FCP. But if you use the reference movie method, FCP is not required for the encoding.
One question for clarification with your workflow, are you logging & capturing these clips then sending them directly to DVD? or are you editing them in a timeline prior to export to DVD?
If you're just using FCP as your Log & Capture tool, then you can skip the reference movie step and just grab the captured clips in your Capture Scratch folder and send those directly to Compressor.

DVD Studio Pro and Soundtrack Pro always ask for Serial

I use FCP X and sometimes Logic Pro X but the latter doesn't have nearly the capabilities for dialog editing that Soundtrack Pro did. Now that I'm on Yosemite (have no idea is that the problem) I can only open Soundtrack Pro or DVD Studio Pro by re-entering the serial number. I've seen this before with OS updates, but now it asks for me to re-enter serial every time I try to open them. Even if they were open a few minutes ago and I haven't restarted. Any ideas?

See this thread and see if it helps:
Final Cut Studio Keeps Asking For Serial Number
MtD

Dvd Studio Pro Serial Not Working

Hi all,I recently had to replace my late 2005 G5 Powermac due to its inconsistency in powering up.
Cutting the story short,I bought a second hand PowerMac which Ive been using for the past months with no problems,I re installed my Original compy of Final Cut Studio and everything seems to work fine,oly today Ive tried to burn a project on DVD with DVD Studio Pro 4 and it will not accept my original serial !
Ive already tried deleting the FInal Cut System ID and reinserting the serial but no luck.
Anyone had this problem before ? If not ,how could I claim Apple ?after all the original suite cost me back in its day around 1000euros.
Thanks

kkita75 wrote:
Thats the version I have on my laptop,sorry !
Well, there never was a Final Cut Studio 9. So I'm still confused. What version is listed on your disk?
DVD SP shouldn't be asking for a serial number if the FCS suite was correctly installed.
Download this utility and remove DVDSP (it will ensure that you get all the associated files). Reinstall from the install disks. Then run Software Update repeatedly until there is nothing more listed. Repair permissions in Disk Utility and launch DVDSP.
I wouldn't be surprised if this fails to cure the problem. If it doesn't work, repeat the process and uninstall the entire suite, running Software Update, and so forth.
Russ

How Do I Use DVD Studio Pro Files In iDVD?

I had somebody create a DVD for me using DVD Studio Pro. (This was a compilation of many different videos.) It turned out great.
I now want to make a DVD of one of those videos on my own using iDVD '08.
I have the raw video/audio files. But, my problem is the raw files that were used for the DVD Studio Pro project are separated into one video file and one audio file. I don't know how I can get them both into iDVD. I was told that I have to recombine these two files into one file. But, how do I do this and still maintain the best quality?
(I am not a video expert by any means, but I can tell you that the video file is a ".mpeg" and the audio file is an ".ac3". When looking at the .mpeg file in the finder it lists its Kind as "MPEG Movie" and when looking at the .ac3 file in the finder it lists its Kind as "Unix Executable File".)
(I'm using iDVD 7.0.1 - I do have Quicktime Pro - I do not have the Quicktime MPEG-2 Playback component - I do not have DVD Studio Pro)
Thanks in advance for your help!

Q: How Do I Use DVD Studio Pro Files In iDVD?
A: You don't, essentially.
DVDSP is apple's top end app and it is intended to be used with FCP > Compressor > DVDSP. All of these are pro apps.
i-Apps are consumer apps all of which are QT based. With that in mind ....
now that doesn't mean you can't use FCP > iDvd. You can. But you have to do it in a way that iDvd will read all the files (meaning you must think in terms of QuickTime and export in this way). So when you export your QT File / Movie from FCP over to iDvd, it will look something like this hopefully regardless of the raw image & audio files you have already compiled which unfortunately will NOT work with i-Apps BUT will work with apple's pro apps which is the intended workflow / direction of said files in the first place.
Btw ... if your QT movie has chapter markers then please use the following settings so iDvd can read these markers. (if on the other hand you were looking to export this file to DVDSP; then you would choose DVDSP Markers.
Let me know if the above helps. If not, just come on back.

Export settings for quicktime movie to use in DVD Studio Pro

The workflow:
I created a movie and did extensive sound adjustments in iMovie and a few video edits, and exported it to a quicktime format:
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
Since then I upgraded to FCS, and tried to create a DVD with DVD SP and import the movie, and I get this error:
Import error:
One or more files failed to import. Common reasons for this are that they do not match the current project's video standard or their file format is not supported.
I'm fairly sure I have matching video standard...and the file format has always been supported before.
I imported the quicktime (.mov) file to FCP and added some edits, recreated the chapter markers, and early on there was a pop-up that said my movie format did not match the project settings, so I checked the "okay" to adjust the video file to match.
When I finished, I exported the file from FCP to a quicktime movie with the "current settings" that have always worked with DVD Studio Pro before, and I'm getting the same error.
I don't know where the problem is. Both the original movie I created in iMovie and the movie I recreated in FCS will import to iDVD. I wanted the better quality production from DVDSP....
I no longer have the iMovie project file. (I thot I was done.) I do have the original footage, but I'm already three days in and hoping to avoid starting over.
I would sure appreciate any help!
Thanks!

2cute2b2smart wrote:
I don't know where the problem is.
compression H.264
Quality: High
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1280x720
The specifications you listed are the problem.
I can't comment on iMovie -don't use it personally.
From FCP, you would export a self contained movie using the current Timeline settings (not H.264 ever)
Bring that file into Compressor and apply one of the time based DVD presets that the running time of your movie fits into. This will produce a MPEG 2 video file and an AC3 audio file. Bring both into DVDSP and author.
A DVD video is always standard def 720x480 (NTSC) or 720x576 (PAL).
Converting the output from FCP to H.264 is adding an unneeded compression stage that will compromize quality -because DVD assets are always MPEG 2 / AC3. Even if DVDSP accepts that H.264 file, it gets transcoded again using DVDSP's own compression system.
All of this is covered in the DVDSP user manual. Take the time to read it. DVD authoring is complicated if you just jump in and start poking around, simple if you take the time to understand the basics.

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

DVD Studio Pro must be serialized before using...?

Similar Messages

Maybe you are looking for