Dvd studio pro problem?

Hi everyone! If you can solve or even try to solve my problem in dvd studio pro i will be very gratefull.
I filmed a wedding on a jvc hm750 camera and edit this in FCP 6.0.6. The total time of the project is almost 6 hours with 7 chapters. I tried quicktime conversion in FCP with a file size 4 gig. when i drop this in dvd studio pro it becomes almost 50 gig. Also tried in compressor best dvd quality 120 minutes on sd dvd, with a file size of almost 12 gig. How can i solve this without losing to much quality on my footage.
What about the chapters in my project? When i import the file in dvd studio pro the chapters are visible, but will dvd studio pro automaticly burn the chapters on dvd? Please help me out, its keeping me busy now for 3 days in a row with no results.

You will need to break up the project in FCP. Set in and out points in your timeline and export the resulting chunks as Quicktime movies with current settings then run them through Compressor.
If you want to do a nicer job create 3 new sequences and put titles at the beginning and end of each segment. You can also break it up into more sequences/discs giving you the possibility to create meaningful parts and not just chop it off at the 2 hour mark.
Not my business but .... I'd cut it down to 90 minutes max. Who's going to watch all that?

Similar Messages

4:3 & 16:9 on one sequence in FCP5.1/DVD Studio Pro Problem...

G'day,
In ref to my previous post, I am trying to make a showreel of the short films I have been involved with over the past 2 years, to then put onto a SD DVD.
The first 3 projects were filmed on DV-CAM, 4:3, 25fps, 48k. The next 3 were filmed on XD-CAM, 1920x1080p, 25fps. I have the XD films as quicktime movies (XD-CAM codec), but the other footage I had to rip out of Video_TS folders (ie VOB files).
I used MPEG StreamClip, and saved them as MPEG2 & AIFF files, 16bit Integer (Big Endian), 720x540, data rate 5595.22 kbits/s.
In order to bring both formats together, I created a sequence that was 960x540, using XD-CAM codec. There are thus black bars on the sides of the 4:3 footage, but the XD-CAM footage fills the screen.
Now, the problem really is not so much that process, which appears to have created a fairly good quality compromise between the two formats... but with DVD Studio Pro...
After creating a DVD, I have just checked it out, and the 4:3 footage in the showreel distorts if there is any fast-moving action (pixellation in the area of rapid movement). Looking at the settings available in iDVD, it appears as though my 960x540 has been scaled down to 720x404 (which thus fits the 720x540 interlaced SD DVD preset?...
Would that be the cause of the degradation? Should I go back into FCP and make the sequence
The footage itself (from the VOB file) appears to be ok, as I've included it as well, and it plays fine.
Hope this is coherent... late night and on a buzz from graduation screening night... my film picked up 2 awards, one granting "us" a year's usage of Uni equipment... yay.
cheers and thanks
cosmic
Message was edited by: cosmichobo

This pic demonstrates the issue...
http://members.optusnet.com.au/thecosmichobo/fcp.jpg
The viewer shows the VOB file... (I imported one to make sure MPEGStreamclip was extracting ok - there is no difference between the original VOB file, and the MPEG2 file that it creates) The Canvas shows the result.
I know there's a tape-distortion line there too, but it's the very harsh fuzziness created around her arms that I'm curious about.

DVD Studio Pro - Problem with video size

Hello all,
I'm having a problem with dvd studio pro.
I have a project that I edited in FCP, then compressed to the default DVD setting in compresser, then imported the video as an asset in DVD studio pro. I'm trying to create a SD dvd, and whenever I simulate the dvd, the video plays with some of the left side cropped out. I have text that is cut off because of it. This has never happened before, and I have checked again and again to make sure its all set on SD. I'm pretty new to fcp studio, i'm teaching myself as I go and this is driving me crazy. I have made a bunch of dvd's prior, and this has never happened, so I have no idea what I did to mess things up.
For all I know, the problem may not even have to do with dvd studio, it may be in compresser. I have also played around with that, to no avail.
Thanks for the help!
Thomas

Thanks Javabob,
That is a way good idea. While trying your suggestion i stumbled upon the problem, I have no idea why i never noticed this before. When i got to the step of importing it as an asset into dvd studio, i clicked on the video track and the inspector box for it showed up, then i noticed it had a display mode drop down menu set on '16:9' pan-scan. I then changed it to 16:9 letter-box and the simulation video fits correctly onto the screen. I don't really understand the reason why pan-scan blew it up like that, but it is fixed now. I still don't recall ever having to do this before, but oh well. I will pay attention to the inspector window for the videos more carefully from now on.
Thanks for the help Javabob!

Importing Compressed Video into DVD studio Pro: PROBLEM WITH SYNC

Hello,
This post regards software from Final Cut Studio 3
So, I have made a 2 minute clip in FCP7, exported it, compressed it using compressor, and then opened up dvd studio in order to burn it.
I have made sure the lengths of the audio and video were equal in FCP.
The problem is that when i drag the M2v and AC3 files into the DVD studio pro timeline, The audio is slightly longer than the video track.
I am creating a loop and want to duplicate the tracks within DVD studio to make use of the full dvd....so after i have added the files into the timeline a few times, there is a noticable lag, due to the discrepency between the length of audio and the length of the video.
I have even tried to change the length, under 'duration'in the track menu, but this makes no difference.
any help much appreciated.
THanks, Bradley

Bradley Zero wrote:
The looped clip in question is APPROXIMATELY 2 minutes. Infact, the DVDs are for an art installation, with numerous clips all Approx 2 minutes long, set to loop using dvd studio to around 20 minutes. (snip) However the loop is fine tuned so cutting frames to allow for the different frame rates of Ac3 and M2v is not an option.
So far I have only made a test batch, next time to avoid these problems I will Loop the files within FCP7 before exporting and compressing to avoid frame rate discrepancies. good idea??
I'm not surprised to hear that the clips are for an Art installation. I once helped my partner with multiple looped VHSs for a Degree Show & believe me DVDs make life a whole lot easier!
In conclusion I would recommend that you do a separate sound & vision edit, so to speak. Once you have finished your vision edit, lay down the single (compressed) vision clip on a track in DVD SP. Loop it to taste, and make a pencil note of the number of loops. Go back to FCP & duplicate your original final edit (ie the 'lock down') & loop the sound to match. Play out just the complete soundtrack at the new ~20 minutes and encode the resulting mix to AC3. Add it into DVD SP3. Voila! Really this is no different from making a movie; when the sound is going to be worked on by a whole different set of people from the pictures and both added together when complete.
... is there an alternative sound format to export in that is compatible with dvd studio pro that will sync perfectly in the sequence?
Of course uncompressed .aiffs don't suffer from the frame-based problem and are compatible with DVD SP. However using uncompressed sound is not recommended as this can lead to playback problems - especially with DVD-Rs - because of the high bit-rate.
BTW where is the show? Regards, Stedman.

Installed Leopard and DVD Studio Pro Problems

Just installed Leopard 10.5.6 Box Set and Compressor and DVD Studio Pro will not work properly.
DVD Studio Pro 4 will open a past dvd and when go to burn it shuts down. I also cannot export out to compressor from FCP 5. I already tried the http://support.apple.com/kb/TA47672?viewlocale=en_US
link and it didn't work for either. Any guidance would be appreciated!
Thanks

Just did an upgrade install. No erase and install which I'm sure is the best way. I just got off the phone with apple and also found this on apple's site.
Issue or symptom
Compressor/Apple Qmaster versions 2.3 and earlier and version 3.0 are not supported on Mac OS X 10.5 Leopard.
Solution
Compressor and Apple Qmaster 2.3.1 and later or version 3.0.1 or later are supported on Mac OS 10.5 Leopard. Use Software Update to ensure you have the latest updates.
I couldn't do it even if I wanted to. Time to move on to Intel or FCP 2. Thanks for responding.

DVD Studio Pro problem at Install Final Cut Studio

Hi,
I'm a new (not very knowledgeable user)trying to install Final Cut Studio.
My iMAC configuration is: 2.8 GHz Core2 extreme, , 2GB 667 DDR2 SDRAM, 1 TB Serial ATA drive, Super Drive 8X, plus a 1TB G-Raid.
I placed my final cut studio installation disc into the system and started the dialogue. Here's the result:
1) Final Cut PRO box (blue) checked Action= install
2) Color

Aborted queston answered later, Thank you

Problems downloading the new DVD Studio Pro update.

Hi Everyone,
I was wondering if anyone else has had this problem/message when trying to download the new DVDSP update?;
'You appear to have already downloaded the DVD Studio Pro update.'
This also happened on the last updates that were released.
There is a workaround that I know of that I had to use last time but it seems strange that this is occuring. Has anyone else had any issues with this update (or the last for that matter)?
Any help would be greatly appreciated as Apple Tech would not help me because I am on a Volume Licence and the Apple Store that I purchased it through has not given me any help.
Thanks
Carlo

I can get around this problem by using software update to download the updates and then use the downloaded file to update the machines but I would really like the ability to download the updates as a standalone dmg file.
I am running 20 systems on an airport network that will freeze up if I do the updates online the best i can do is 3 at once to avoid serious lag.
Being able to download them seperately was always my first choice so i could update the machines regardless of being conected to the net or not. The workaround that I am using only downloads the package file and it seems there is the possibility of them being corrupted or damaged over time (moving from server to drives to media to computers etc).
I still want to know why it thinks I have downloaded them already, it doesn't make any sense.

Aspect ratio problem in Windows Media Player for DVD from DVD Studio Pro

So I made a DVD with DVD Studio Pro and it looks good in Apple's DVD Player, on an Insignia DVD player appliance and on Playstation 2. Both the movie and the deleted scene were 16:9 from camera to Final Cut Pro and they show that way in all these players.
But on Windows Media Player for Windows XP, the program thinks the movie is 4:3 and the deleted scene is 16:9. Nero's Showtime has the same exact behavior, but at least you can force aspect ratio on Nero.
Besides being longer, the movie is different from the deleted scene in that the movie was originally out of Final Cut Express on an older Mac and it was encoded big endian. The deleted scene was output from Final Cut Pro and encoded little endian. I didn't think it would make a difference, but I tried outputting the movie from Final Cut Pro on the newer Mac and it did come out little endian. I took that into DVD Studio Pro, got rid of the old VIDEO_TS folder and re-built the project, burnt a new DVD. Then I went back to Windows and...
...the same exact problem. Some of the people I give this DVD to will be using Windows Media Player to view it, which is why I want this to not be an issue at all. What am I overlooking?

Look, everyone here (who each have been creating DVDs for over a decade) is telling you the same story. WMP is buggy. Everyone in the industry knows that. Hardware manufacturers like Dell and HP, know that. Why don't you use the DVD player program that they put on the hard drive? Sure one "Hollywood" title works. Did I mention that WMP is buggy? Test a thousand titles, and I'm certain that you will find some discs have problems on WMP, and WMP alone. (And it isn't my assertion that Hollywood DVDs have issues in WMP, everyone is telling you that.) No one has a solution for this, except to not use WMP. Let me repeat once again, no one has a solution for this except to not use WMP. It is impossible to add any sort of programming to the disc that will detect which player is being used to play the disc and compensate for the problems of that player.
Let me put it this way, if you have a disc that plays fine on Zeus's device, and on Apollo's device, and on Hera's device, and on Hermes' device, and on Artemis' device, but you have problems with Athena's device, then logically, Athena's device has a problem... not the disc. Your own experience has proved this to be true. If you were having problems with every device used, THEN you could rightfully say that there is a problem with the disc.

DVD STUDIO PRO burning problem damned!

hi everyone.
Here are the steps:
-i edited a film on final cut, exported it in quicktime proress 422 25p 48khz.
created a dvd on dvd studio pro.
it doesnt work and here is the log:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Barquettes v3)...
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Warning: The file ‘UNTITLED_DISC.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
I'am stuck, can anyonw help!
thanks a lot!

I've run into this before too.
What ended up happening to me, after literally many months of stress and frustration, for it was a huge project I had worked on for a long time. I simply had to just make a new project. Something within my project settings or files had become corrupt. My first suggestion would be to just start again and see what happened. But if you don't want to, try making sure you don't have any hidden unused tracks or buttons. This will upset and make DVDSP pissy at times. If that isn't it, maybe it is your actual final cut exported file. Ask yourself, did you run it through compressor or not (this is not a necessity, but could potentially help), if not then try burning a dvd with another project all together and see what happens. It might help you narrow down your problems, sort of like a check list. If the other project burns, then it is either your DVDSP project (which is my guess), or it is your final cut file, which means you just export again and try again.
Hope that helps!

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Another burn problem (dvd studio pro 3)

have built my project, but when i hit the burn button i just get a message box telling me 'formatting was successful'. why won't it start burning a disc, what am i doing wrong?
thanks

I am having the same problem. Have you recently upgraded to Leopard? It worked fine for me until I upgraded. I hope they come up with a fix. I would like to use DVD Studio Pro 3 more, but I don't use it enough to justify upgrading to 4.

Problems Importing Complete Video in DVD Studio Pro

I have video that I edited in Final Cut Pro and exported as a QuickTime file (.mov), with chapter markers. I checked the video in QuickTime player and all my chapter markers were present, and the entire video played through the end. The whole movie is 52 minutes in length. However, two problems have arisen once the video was imported into DVD Studio Pro.
1. All my chapter markers disappeared.
2. The entire audio track is present and will play through the end of the movie, but the video cuts off more than 6 minutes before the end of the movie.
I have tried several options to get this video to import correctly. Sometimes the chapter markers remain, but I can never get the video track to import completely. I would greatly appreciate any advice, as this has become very frustrating. Thank you.

Since my last post, I have tried importing a couple different versions of the video file. One attempt included chopping the video file into 2 parts and exporting them two separate .mov files from FCP. I then tried to insert them into the track editor as separate entities that played back-to-back. This led me to the discovery that DVDSP will not let me have a video track that plays any longer than 00:45:58:21. Why this is, I do not know, but I am convinced this problem lies within DVDSP, not in the video file. Is there a setting somewhere that limits the length of a video?

"file is not compatible when import assets in dvd studio pro, my file are .mov and .mp4, what is the problem?

i have a MacBook Pro v. 10.7.5, also have dvd studio pro 4.2.2
I have a file exported from final cut v. 7, using quick time movie option, it created a file with .mov. When I import to dvd studio pro, I have an error
message " file is not compatible". shall I export again using different parm? settings? thanks for the help in advance.

Thanks, Russ. I had my problem resolved by re-creating file from Final Cut using the "Video Format" as "MPEG-4 improved" instead of "H.264" before.
My orginial source is a dvd came from Taiwan, I used software 'Handbrake' to convert it to MPEG-4. Input to Final Cut to edit it. Exported out with H.264 as Video Format, wishing to improve the image quality but run into 'file impaitable' when import to DVD SP.
Now. I exported out Final Cut using the following parms, pictures quality is not bad.
1. File format = MP4
2. Image size= 1280x720 HD
3. frame rate = 30
4. video format = MPEG-4 Improved
hope this help people who might run into same problem. I never use the Compressor, will try it next time. thanks Russ.

DVD Studio Pro 4.o Install Problem

I had trouble installing FCP Studio on a MBP. Disk space is no problem; I set installer to put the loops and templates on a clean, new 300 Gb drive, and main drive has 40 Gb free.
The installer keeps hanging on the portion where it states it is writing the DVD Studio Pro Templates. The first time, the progress bar got to 100%, but did not move for 30 minutes, and both the nottom buttons are greyed.
I did a force quit, tried from beginning (skipping components that did get upgraded), and this time it just stopped at 98%.
For the third try, I had to skip everything related to DVD Studio Pro, and the installer got to the end of its work ok.
Not sure what I am missing- I have on my remote drive:
Library/Application Support/DVD Studio Pro/Apple/
Patches/
Shapes/
Styles/
Templates/
with content in all 4 directories.
It's not critical as I have no immediate needs for pressing DVD titles, but only expect difficult installers when I have to boot in XP

No Joe, but I've not really tried anything. I have no immediate need for DVD Studio. I thought I maye have had a bad disk but if you have the same issue it might be a problem with the installer script.
I was installing these on an external drive, bot sure if that is a factor.
Hopefully Apple reads these forums...

Slideshow transistions problem DVD Studio Pro

When I author a build from DVD Studio Pro 4 and view the slide show using the Apple DVD player I see a green rectangle on the bottom of each transition. No problem when checking it in DVD studio pro. Would appreciate any help, suggestions, etc. Lack of sleep and a deadline is not helping my thought process.
thanks

First, export the shots you want to use.
From there you can import directly to dvd studio pro and title them as a dvd slide show if you like. You can also do this with idvd.
The dvd slide show format is limited to 99 shots, though and has some other limitations, (transitions), as well. You can break these by turning the shots into a movie, using something like imovie or final cut pro. Both also support titling.
There are several stand alone programs for doing this too, including photo2movie, and still life, both of which have relatively low price tags.
Search the dvdsp or fcp forms for more on this. Also search for "ken burns effect", which you may want to consider if you do this much.

Dvd studio pro problem?

Similar Messages

Maybe you are looking for