DVD Studio Pro Slideshow problem

Have created DVD with video track and two slide shows.
Build works fine and plays fine on simulation and built in DVD player
but when I attempt to play it on my Sony DVD player, the video track will play fine and at the end it links to the first slide show with no problem but if I attempt to launch either slide show from the menu, it crashes the player
and gives me an error code (error code says disk is dirty).
I have burned 3 disks and all behave the same.
I have encoded the slideshows as slideshow and converted them to tracks but the result is still the same.
Anyone else encountered a similar problem? Any fixes or work around?
Thanks for your help
David

Don't use slideshows. Put your stills together in FCP, etc. There are SO many posts about slideshows with weird problems.
OR
Try turning your slideshow into a track before you build. There's a button to do it right at the top of the slideshow dialog. This should maybe give you better results.

Similar Messages

DVD Studio Pro Transitions Problem

Hi, When I try to apply a transition to my slideshow in DVD SPro, only white appears during the transition time. Can anyone give me some insight on what the problem may be.
Thanks,
Gankog

I am having the same problem. Have you recently upgraded to Leopard? It worked fine for me until I upgraded. I hope they come up with a fix. I would like to use DVD Studio Pro 3 more, but I don't use it enough to justify upgrading to 4.

DVD STUDIO PRO burning problem damned!

hi everyone.
Here are the steps:
-i edited a film on final cut, exported it in quicktime proress 422 25p 48khz.
created a dvd on dvd studio pro.
it doesnt work and here is the log:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 7 PGCs in VTSM1
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Barquettes v3)...
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Warning: The file ‘UNTITLED_DISC.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
The recording device reported the media error: Unknown device error. (0x73, 0x03.)
I'am stuck, can anyonw help!
thanks a lot!

I've run into this before too.
What ended up happening to me, after literally many months of stress and frustration, for it was a huge project I had worked on for a long time. I simply had to just make a new project. Something within my project settings or files had become corrupt. My first suggestion would be to just start again and see what happened. But if you don't want to, try making sure you don't have any hidden unused tracks or buttons. This will upset and make DVDSP pissy at times. If that isn't it, maybe it is your actual final cut exported file. Ask yourself, did you run it through compressor or not (this is not a necessity, but could potentially help), if not then try burning a dvd with another project all together and see what happens. It might help you narrow down your problems, sort of like a check list. If the other project burns, then it is either your DVDSP project (which is my guess), or it is your final cut file, which means you just export again and try again.
Hope that helps!

DVD Studio Pro Slideshow help.

I'm attempting to make a slideshow and I'm wondering if it's possible to import a slideshow created in iMovie as 1 jpeg?
For example, I want to do a slideshow in DVD Studio Pro with each slide having its own audio. However, I want multiple slides to play over just one audio track. Let's say I have a song by Mariah Carey and want to show different details about the song and album while the song is playing.
I hope I explained it so anyone can understand.

If you want one audio file per slide you can do that in DVD SP. If you want multiple slides for one audio file then you need to create a video, either in iMovie or FCP.
Message was edited by: Shawn Birmingham

DVD STUDIO PRO SLIDESHOW VOLUME?

Hey all...so i finally burned my DVD...while checking it, i noticed that the volume for the slideshow music was WAY TOO HIGH compared to the rest of the Menu music i had added...i cannot find a Volume level for the music anywhere like did on IDVD...help...does anyone know how to adjust the audio levels for the dvd menus and slideshows so that they are all the same? thanks

DVDSP is a little different to iDVD in this respect. It follows a more high end work flow, and forces you to get the levels and assets correct before you start to author the disc. There are no audio tools inside DVDSP which, at it's basic level, is a tool for compiling the assets into a navigable DVD. It isn't a composition tool in any way really, although it does have things like the menu editor and so on.
The only way to get the audio correct is to do it outside of DVDSP and then import the correct version with the right levels and add it to the track in DVDSP.

DVD Studio Pro 4 problem

So I set up a DVD with 2 menus and 18 chapters, burned it and it played o my DVD player. BUT, I made an error - the Play button did not play beyond the first chapter. So I tried to fix it. An article on Ken Stone's site suggested making a story for each chapter. I started to do that. The program crashed. Now menus do not work. The buttons, texts, etc are there ( I see outlines) but contents are invisible unless i double click on them and then if I click elsewhere they go away. i can see the settings in the Inspector and some things show up in Graphical View, but nothing comes up in Simulator. This happens with all files (I tried starting again).
I trashed prefs etc etc. I suppose reinstalling program is the next thing. Any ideas other than that? If the file is corrupt will it corrupt any new installation? I hate to lose everything I did. what are the PAR files?

I did make a new project. It had the same problem.
There is one track.
I set end jump to Main Menu (or Menu 1 as it is called).
We performed maintenance on the Mac, also, but that did not fix it.
I even tried using a different user: same prob.

Dvd studio pro button problem

Hi, i have created my DVD with a menu, and use an arrow default button for each chapter of the DVD.
I have burned on my DVD and i notice a problem. in the menu, when I push a button, all the buttons disappears before the track start to play...
how to solve that?
thx a lot

Hi Jonathan, welcome to the discussions.
Yes - you certainly can put buttons over video in a track. It works by using the subtitle stream with start and end markers for the button duration. Look up 'Buttons over video' in the manual.
It is easy to set up, but there are reports of mixed levels of reliability with it.
The 1GB allowance in menus can be doubled if you use 4:3 menus AND 16:9 ones... but later versions of DVDSP allow you to move the menus into different spaces which helps avoid the 1GB limit.
Just so you know, the limit is actually formed because earlier versions of DVDSP insisted on all menus going into a single VOB when the disc is built. A VOB on a DVD can only be 1GB...

DVD Studio Pro Burn Problem

I have built a Dual layer single sided disk. Everything in the build works great on the HD however once it is burned to disk parts of the second layer lock up or only play 1 frame every 20 secs.
Does anyone have any idea what causes this?

How is the disc designed?
One long track? Is the areas where it is skipping near the layer break or in a story? Did you build first then see if there is a valid layer break (a proper chapter selection will be dark black.)
Were these items encoded at a different rate and/or did you A.Pack all the audio?
What type of media (brand + or -R)?

Slideshow transistions problem DVD Studio Pro

When I author a build from DVD Studio Pro 4 and view the slide show using the Apple DVD player I see a green rectangle on the bottom of each transition. No problem when checking it in DVD studio pro. Would appreciate any help, suggestions, etc. Lack of sleep and a deadline is not helping my thought process.
thanks

First, export the shots you want to use.
From there you can import directly to dvd studio pro and title them as a dvd slide show if you like. You can also do this with idvd.
The dvd slide show format is limited to 99 shots, though and has some other limitations, (transitions), as well. You can break these by turning the shots into a movie, using something like imovie or final cut pro. Both also support titling.
There are several stand alone programs for doing this too, including photo2movie, and still life, both of which have relatively low price tags.
Search the dvdsp or fcp forms for more on this. Also search for "ken burns effect", which you may want to consider if you do this much.

DVD Studio Pro Dual Layer Break Point Problem

I have a problem with a disc that I am burning. It is a dual layer (the break point is not set to seamless) with 1 movie that is about 3.6 GB and 1hr 23 min long, a 30 min slideshow, another 30 min extra and five other extras that total to about 20 min. I put the dual layer break point at the beginning of the slideshow, everything played fine on the computer, but on the Panasonic DVD player it just freezes at 35 seconds into the slideshow. Its never had a problem with DLs before. Itried the DVD on my softmodded Wii, on a program for it called WiiMC (it uses Mplayer) and everything played fine. I tried another burn where i set the break point to fifteen minutes before the end on the main 1:23 movie and on the DVD player it still froze at 35 seconds on the slideshow. Is there anything that you guys can suggest to help?

DVD+R or DVD-R?
http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=1%2 6section=9%26tasks=true
DVD+R Double-Layer
You can use DVD+R double-layer media, often referred to as DVD+R DL, for burning your dual-layer projects. With DVD+R double-layer media, DVD Studio Pro places the layer break point and sets the switch point to be nonseamless as specified in your project.
DVD+R double-layer discs require you to use the Opposite Track Path (OTP) direction setting when burning the disc. This means that the first layer must be larger than the second layer. See Setting the Dual-Layer Direction for more information.
While DVD+R double-layer discs allow you to burn your dual-layer projects, they tend to have more compatibility issues than the other types of DVD media.
DVD-R Dual-Layer
If your system contains a DVD drive that can write to the new DVD-R dual-layer media, you can burn your DVD project to it with DVD Studio Pro. However, there are several issues:
Because currently DVD Studio Pro has no way to identify DVD-R dual-layer media as having two layers, burning a dual-layer project to it results in the appearance of an alert message telling you that the DVD media may have insufficient room to hold the project. This message is based on the assumption that the disc is single layer. Both layers of the disc will be written to as needed, however, when you click Continue.
If you are burning a dual-layer project, the break point you set will not affect where the layer break actually occurs. Instead, the first layer is written to until filled, at which point the drive switches to writing to the second layer.
The switch between layers is a seamless layer change not supported by some DVD players, which may stop playing the disc when the switch point is reached.
Important: Do not use DVD-R dual-layer media unless these issues do not impact your project.

Problems downloading the new DVD Studio Pro update.

Hi Everyone,
I was wondering if anyone else has had this problem/message when trying to download the new DVDSP update?;
'You appear to have already downloaded the DVD Studio Pro update.'
This also happened on the last updates that were released.
There is a workaround that I know of that I had to use last time but it seems strange that this is occuring. Has anyone else had any issues with this update (or the last for that matter)?
Any help would be greatly appreciated as Apple Tech would not help me because I am on a Volume Licence and the Apple Store that I purchased it through has not given me any help.
Thanks
Carlo

I can get around this problem by using software update to download the updates and then use the downloaded file to update the machines but I would really like the ability to download the updates as a standalone dmg file.
I am running 20 systems on an airport network that will freeze up if I do the updates online the best i can do is 3 at once to avoid serious lag.
Being able to download them seperately was always my first choice so i could update the machines regardless of being conected to the net or not. The workaround that I am using only downloads the package file and it seems there is the possibility of them being corrupted or damaged over time (moving from server to drives to media to computers etc).
I still want to know why it thinks I have downloaded them already, it doesn't make any sense.

Aspect ratio problem in Windows Media Player for DVD from DVD Studio Pro

So I made a DVD with DVD Studio Pro and it looks good in Apple's DVD Player, on an Insignia DVD player appliance and on Playstation 2. Both the movie and the deleted scene were 16:9 from camera to Final Cut Pro and they show that way in all these players.
But on Windows Media Player for Windows XP, the program thinks the movie is 4:3 and the deleted scene is 16:9. Nero's Showtime has the same exact behavior, but at least you can force aspect ratio on Nero.
Besides being longer, the movie is different from the deleted scene in that the movie was originally out of Final Cut Express on an older Mac and it was encoded big endian. The deleted scene was output from Final Cut Pro and encoded little endian. I didn't think it would make a difference, but I tried outputting the movie from Final Cut Pro on the newer Mac and it did come out little endian. I took that into DVD Studio Pro, got rid of the old VIDEO_TS folder and re-built the project, burnt a new DVD. Then I went back to Windows and...
...the same exact problem. Some of the people I give this DVD to will be using Windows Media Player to view it, which is why I want this to not be an issue at all. What am I overlooking?

Look, everyone here (who each have been creating DVDs for over a decade) is telling you the same story. WMP is buggy. Everyone in the industry knows that. Hardware manufacturers like Dell and HP, know that. Why don't you use the DVD player program that they put on the hard drive? Sure one "Hollywood" title works. Did I mention that WMP is buggy? Test a thousand titles, and I'm certain that you will find some discs have problems on WMP, and WMP alone. (And it isn't my assertion that Hollywood DVDs have issues in WMP, everyone is telling you that.) No one has a solution for this, except to not use WMP. Let me repeat once again, no one has a solution for this except to not use WMP. It is impossible to add any sort of programming to the disc that will detect which player is being used to play the disc and compensate for the problems of that player.
Let me put it this way, if you have a disc that plays fine on Zeus's device, and on Apollo's device, and on Hera's device, and on Hermes' device, and on Artemis' device, but you have problems with Athena's device, then logically, Athena's device has a problem... not the disc. Your own experience has proved this to be true. If you were having problems with every device used, THEN you could rightfully say that there is a problem with the disc.

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Another burn problem (dvd studio pro 3)

have built my project, but when i hit the burn button i just get a message box telling me 'formatting was successful'. why won't it start burning a disc, what am i doing wrong?
thanks

I am having the same problem. Have you recently upgraded to Leopard? It worked fine for me until I upgraded. I hope they come up with a fix. I would like to use DVD Studio Pro 3 more, but I don't use it enough to justify upgrading to 4.

4:3 & 16:9 on one sequence in FCP5.1/DVD Studio Pro Problem...

G'day,
In ref to my previous post, I am trying to make a showreel of the short films I have been involved with over the past 2 years, to then put onto a SD DVD.
The first 3 projects were filmed on DV-CAM, 4:3, 25fps, 48k. The next 3 were filmed on XD-CAM, 1920x1080p, 25fps. I have the XD films as quicktime movies (XD-CAM codec), but the other footage I had to rip out of Video_TS folders (ie VOB files).
I used MPEG StreamClip, and saved them as MPEG2 & AIFF files, 16bit Integer (Big Endian), 720x540, data rate 5595.22 kbits/s.
In order to bring both formats together, I created a sequence that was 960x540, using XD-CAM codec. There are thus black bars on the sides of the 4:3 footage, but the XD-CAM footage fills the screen.
Now, the problem really is not so much that process, which appears to have created a fairly good quality compromise between the two formats... but with DVD Studio Pro...
After creating a DVD, I have just checked it out, and the 4:3 footage in the showreel distorts if there is any fast-moving action (pixellation in the area of rapid movement). Looking at the settings available in iDVD, it appears as though my 960x540 has been scaled down to 720x404 (which thus fits the 720x540 interlaced SD DVD preset?...
Would that be the cause of the degradation? Should I go back into FCP and make the sequence
The footage itself (from the VOB file) appears to be ok, as I've included it as well, and it plays fine.
Hope this is coherent... late night and on a buzz from graduation screening night... my film picked up 2 awards, one granting "us" a year's usage of Uni equipment... yay.
cheers and thanks
cosmic
Message was edited by: cosmichobo

This pic demonstrates the issue...
http://members.optusnet.com.au/thecosmichobo/fcp.jpg
The viewer shows the VOB file... (I imported one to make sure MPEGStreamclip was extracting ok - there is no difference between the original VOB file, and the MPEG2 file that it creates) The Canvas shows the result.
I know there's a tape-distortion line there too, but it's the very harsh fuzziness created around her arms that I'm curious about.

DVD Studio Pro Slideshow problem

Similar Messages

Maybe you are looking for