DVD Studio Pro will not load videos

Hello,
Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
I have deleted my DVD Studio Pro preferences several times with no success.
Any Ideas?
Thanks,
Mike Kommersmith

When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
I can import audio, stills ,etc without a problem.
I'm just amazed that noone else ran into this problem yet.

Similar Messages

  • DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

    PLEASE HELP!!!
    I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
    Building Project Treesitting DVD with sub+menu
    17/12/2007 14:12:01
    Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
    Starting DVD Build TREESITTINGDVD_WITHSUB...
    Compiler Initializing...
    Precompiling Project TREESITTINGDVD_WITHSUB
    Compiling VMG Information...
    Created 15 PGCs in VTSM1
    Created 8 PGCs in VMG.
    2 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu 1)...
    Skipped Rendering Menu:Menu 1,Language:1.
    Compiling Menu#2 (Menu 2)...
    Skipped Rendering Menu:Menu 2,Language:1.
    Writing HV000M02.EVO
    1 VTSs and 1 Titles will be created...
    Compiling VTS#1 (Track 1)...
    Preparing Subtitles...
    Muxing HV001T01.EVO
    Done.
    Linking VMG...
    Linking VTS#1...
    Writing VTS#1...
    Writing VMG...
    Writing Layout Info...
    Compile Completed Successfully
    +*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
    +*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
    Start formatting
    Formatting as Standard DVD
    Simulation mode is off
    Lossless linking is on
    Number of layers is 1
    Doing side 1 of 1
    Playable in region 1,2,3,4,5,6,8
    Disc size is 12 cm
    Disc has no copyright material
    Writing UDF 2.50 structures
    Writing files
    Writing final UDF information
    Formatting finished.
    Formatting finished.
    DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
    I have burned another project with menus succesfully..

    Hi
    FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
    You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
    - Create a simple black JPG file i.e. in Photoshop
    - Create a Slideshow
    - Add a the JPG to the slideshow, set duration 2 secs
    - Set the Slideshow as First Play
    - Set Slideshow End Jump to your Main Menu
    Build and burn again.
      Alberto

  • DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

    I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
    I am using DVD Studio Pro 2.
    Any ideas?

    Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

  • DVD Studio Pro will not recogise my chapter markers!!!

    When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
    However, when it gets into DVD Studio Pro, it does not recognise them at all.
    I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
    How can you get Final Cut Pro to just export chapter markers.
    Help!

    You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
    There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
    Hope this helps.
    Max Average

  • Is it true that DVD Studio Pro will not burn HD discs?

    I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
    Thanks, Bob

    You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
    SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
    In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

  • HT1338 after upgrading to OS Mountain Lion my DVD studio pro will not compile.  There doesn't seem to be any software update for DVDSP4.

    after I upgraded to mounatin lion I tried to make a dvd with DVSP4  All goes well importing, connection chapters etc.  Looks fine in simulate.  When I try to make the DVD the measseage says compiler failed.

    I went back into DVD SP and clicked on build.
    After the build I was able to burn a disk.

  • MacBook Pro will not load Facebook

    MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.

    tanyafromva wrote:
    MacBook Pro will not load Facebook, pictures on Pinterest, and will not play any Youtube videos. I already checked for software updates and it is still not working. This is happening in both firefox and safari.
    You have to do more than just check.  If flash player is out dated, you must download & install. 

  • Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    Adobe Acrobat 9 Pro will not load on  new Windows 7 Home Ultimate PC

    When I double click on the AA9 icon to initiate installation, it whirls away for a while then asks if I want to allow "this program to make changes to his computer?"  I click Yes and it begins to process again for a few minutes.  Then it displays the following Invalid Unicode file error message...and simply stops processing or installing.  In that last process, it also reaches out for whatever reason and activates the magnifier tool in Windows.
    I have thought that perhaps upgrading to a higher version of Windows might help, but who knows for sure?
    P.S. – This is a brand new HP Pavilion dv6 series computer that is more than adequate to this task.
    Thanks for your interest in helping!
        b
    Bob Horton, MS
    972-786-6445
    [email protected]
    www.rshorton.com

  • My MacBook Pro will not load

    My MacBook Pro will not load.  I get the white screen with spinning rainbow for several minutes. Once I get the log-in screen it takes several more minutes of the galaxy screen before anything happens. When I am finally able to click the mouse on an application, I get the spinning thing again and nothing loads. The only thing I can do is turn the computer off by holding down the power button.

    You might have an older model that came with disks. In that case, put the disk in and boot while holding down the C key. Run Disk Utility from there.

  • Firefox 13 will not load video

    firefox 13 will not load video - live feed - from websites - other browser - says can not connect

    This can be caused by a recent Flash 11.3 update.
    See:
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  • Why does DVD Studio Pro compress my 3GB video?

    I thought since the original Quicktime movie I made with FCP was under the 4.7(?) capacity of a DVD, that Studio Pro wouldn't compress my 3GB movie. But after import to DVD Studio Pro the whole project only shows up as using 350MB of space. And when burned and played back the video looks horrible! Artifacting (?), etc.
    Do I need to go into Compressor and select a setting there BEFORE bringing it into Studio Pro? What setting is recommended? (8 min, wide screen, HD).
    Thanks!

    >I thought since the original Quicktime movie I made with FCP was under the 4.7(?) capacity of a DVD, that Studio Pro wouldn't compress my 3GB movie.
    Unfortunately, you thought wrong.  The DVD video specification requires MPEG-2 video and either AC3 or PCM audio, specially multiplexed and formatted as VOB files.  So the size of the source file doesn't really matter.
    >Do I need to go into Compressor and select a setting there BEFORE bringing it into Studio Pro?
    That would be preferable.
    >What setting is recommended?
    Duplicate one of the DVD presets and adjust the bit rate to increase the quality ... but do not exceed 8.0mbps or the disc may stutter in some players.  Encode the audio as Dolby Digital (.ac3).
    >8 min, wide screen, HD
    You're out of luck there ... DVD is a standard definition format only.  If you want to deliver HD content on an optical disc, it will have to be Blu-ray - not DVD.
    -DH

  • Playback of DVD Studio Pro 4 built SD video file - Menu 1 screen is WHITE!!

    I recently upgraded from FCP 4.5 with DVD Studio Pro 3 to FCS with DVD Studio 4. I have resolved a number of problems with the upgrade by reading "Apply Discussions", however, I need help with the following: When I import my mpeg2 and AC3 files into DVD SP4, I use the DVD SP4 palette to select an Apple Template for my MENU 1. (I like the "Theater Interior" menu template.) When I view the final product with the DVD SP4 simulator, everything is great including the colors in MENU 1. So, I build my program onto my desktop, the same way I did when I had DVD SP3. Now, the problem begins. When I view the built video TS file on my G5 Apple DVD player, or format it to a standard DVD-R with my pioneer 106D burner and play it back on my in-house DVD player, when the program MENU 1 is displayed on the monitor, it is WHITE in color. The menu is set to times out in 20 seconds. Once that happens, the programs runs perfectly. However, what's with the white menu screen? I can barely make out the buttons. When I click on a button, it operates and the color and program work perfectly from that point. I there an option to get rid of the white screen when the menu comes up? Somehow, when DVD SP4 builds the video file, MENU 1 is encoding with a white background rather than with the colors of the Apple template in use. This did not happen with DVD SP3. Can you help me?
    Ugene

    try switching the menu encoding from software to hardware (or vice versa) in your DVDSP preferences and see if that makes a difference for you.

  • Idvd & dvd studio pro disc not playing properly in other players

    Hi
    I have edited a program for the past 3 DAYS, and i have burned the program using IDVD, DVD studio pro, and Toast Titanium.
    It plays ok on my G5 and my laptop G4.
    And every lousy time i give the disc to the client something different goes wrong.
    If it's not a lockup,it's artifacts, and programs jumping forward and backwards between scenes, by itself.
    I'm using Memorex and Philips DVD discs.
    My Toshiba DVD appliance deck burns the program beautifully and no hiccups.
    But the customer wants the lovely menus that apple has designed
    Personally i am sick and tired of apple and all the "perfect world marketing" , i had yet to burn a DVD disc with idvd or dvd studio pro with any confidence.
    Apple should get into the " Bovine scatology " business, at least when that gets spread something grows despite the smell.
    Anyway, i don't know if anyone can help me or not .
    Any help would be appreciated.
    Thank you
    Vic.

    While I can understand your frustration, I believe the problem here is in the encoding settings. iDVD doesn't give you much control over specific encoding settings, whereas encoding through Compressor will.
    Some specific things are missing from your post. What is your workflow? How are you exporting your timeline? What format is your project (DV, HDV, DVCPRO, PAL, NTSC)? When you built your DVD in Studio Pro, what encoding settings did you use? Do you know where the encoding settings are? What are the settings for your DVD project (SD or HD)?
    You would do yourself and your client good to take some time to read over proper DVD mastering workflows. It's really quite painless once you understand how things work. Blaming Apple for this is not a very helpful way to solve your problem.
    The tutorial DVDs that came packaged with your install discs will also help. Just look at the lessons for DVD Studio Pro.
    Encoding settings for SD DVDs.

  • Dvd Studio Pro Serial Not Working

    Hi all,I recently had to replace my late 2005 G5 Powermac due to its inconsistency in powering up.
    Cutting the story short,I bought a second hand PowerMac which Ive been using for the past months with no problems,I re installed my Original compy of Final Cut Studio and everything seems to work fine,oly today Ive tried to burn a project on DVD with DVD Studio Pro 4 and it will not accept my original serial !
    Ive already tried deleting the FInal Cut System ID and reinserting the serial but no luck.
    Anyone had this problem before ? If not ,how could I claim Apple ?after all the original suite cost me back in its day around 1000euros.
    Thanks

    kkita75 wrote:
    Thats the version I have on my laptop,sorry !
    Well, there never was a Final Cut Studio 9. So I'm still confused. What version is listed on your disk?
    DVD SP shouldn't be asking for a serial number if the FCS suite was correctly installed.
    Download this utility and remove DVDSP (it will ensure that you get all the associated files). Reinstall from the install disks. Then run Software Update repeatedly until there is nothing more listed. Repair permissions in Disk Utility and launch DVDSP.
    I wouldn't be surprised if this fails to cure the problem. If it doesn't work, repeat the process and uninstall the entire suite, running Software Update, and so forth.
    Russ

  • MacBook Pro will not load start up properly

    My MacBook Pro 2012 will not load properly after I took it to the apple store and they ran test on it. When I boot it up I get the gray screen with the loading bar. I can get into disk utility. However I don't believe they messed with anything and it was wirking fine in the store

    Try:
    Mac OS X: Gray screen appears during startup
    BTW, this is the Mac Pro desktop forum

Maybe you are looking for