DVD studio Pro won't import .mov files

My dvd studio pro 4.2.2 from final cut pro 7.0.3 won't import .mov files. Any suggestions?
Thanks,
Chris

Ask this on the Final Cut Studio forum.

Similar Messages

DVD Studio Pro Can't Import MP4 Files

I'm trying to start a DVD Studio Pro 4 project, and have .mp4 video files. When I import them with the Assets>Import tab, they come in as MP4 audio files only, not movie files. The users manual says the integrated encouder auto encodes Quick Time assets into DVD compliant formats with default Compressor settings ... but that is not happening. The MP4s play fine when I double click and open them in Quick Time Player, or post them on line they work fine in a browser. I'm confused, how do I import them to work in DVD Studio Pro? BTW, I did not create them in FCP, nor do I know how to use Compressor yet. I have MPEG Stream Clip but don't know how it would help. Thanks, Tom, Miami.

Use compressor to convert them to m2v and ac3 files before bringing them into DVDSP.
x

DVD Studio pro 3 - cannot import mpeg2 files

Hi,
I have some mpeg2 source files. They are dvd-spec mpeg2 (I think). They are muxed mpeg2, interlaced 29.97 fps. However they will not import. If I demux 'em the audio will come in, but not the Video. QT 7 Pro says the frame size is 640x480 (although lower-level programs will correctly recognize it as 720x480), and the frame rate as 30fps (again lower level programs will say its 29.97 fps).
The mpeg2 comes from a hauupage MPEG2 hardware capture card - it has not been transcoded. The format I guess would be interlaced TV-like input.
Anyone import these kind of mpeg2 without transcoding?

Hi Ryan,
Ideally the mpegs should be elemental streams.
Try demuxing using MpegStreamclip from macupdate. If you can change the settings of your encoder to give you elemental streams that would be a great start.
Also there are many flavours of mpeg and their headers do very considerably and DVDSP doesn't recognise several of them.
You may need to use a utility such as MpegAppend to remedy the situation.
Good Luck.

DVD Studio Pro Quits when importing Photoshop files. HELP!!!

often when importing PS layered files DSP quits without any warning.
and it does it with the same files, some are ok, others make DSP quit. So the problem should be in the files...
I'm going crazy, since I don't undertand where the problem come from, any help?
(I use DVD SP 3.0.2)

see what I have to do:
I create a new PS file, and then paste one by one all levels from the original (buggy) one; then import in DSP the new one and everything is fine!

DVD STudio Pro won't let me delete stills. has brought in ALL my stills

Hi all. In need: DVD Studio Pro won't let me delete STILLS from palette. The minus sign is greyed out even with control-click and shortcut menu. As a result, the program goes through ALL my photos when looking for a cover for my dvd. Makes it impossible to put pix on cover of DVD (when played).
I should be able to DELETE these folders with 1000s of photos! The manual says so but the minus sign still stays greyed.
Also, not sure how it imported all of these in first place? i am currently keeping photos in i-photo, so ....?
Do I need to wipe out the dvd-studio pro and replace. [Of course I am in Rome and don't have that disc!]
HELP if possible is much appreciated.
best,
SoundFilm

http://discussions.apple.com/thread.jspa?threadID=2230816&tstart=0

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

Premiere CS6 won't import mov files, the message: "file has no video or audio streams" shows up instead. How can I import the files?

MOV is a wrapper that can contain many different codecs. The message you get is indicative of a distribution codec inside the MOV wrapper. You may need to convert the material to an editable codec before importing.

How do I rectify the issue that AE (CC) won't import mov files on Windows 8.1. (It's the most current Quicktime).

How do I rectify the issue that AE (CC) won't import mov files on Windows 8.1. (It's the most current Quicktime).

troubleshooting QuickTime errors with After Effects

DVD Studio Pro Won't Launch

When I try to launch DVD Studio Pro 4.02, I get a series of error messages saying that it can't find specific files. These files are from an old project that I deleted, so they no longer exist. The real problem is that it eventually freezes and doesn't open. I reinstalled from the disks, reinstalled the upgrades, tried deleting every project file and all files in the DVD Studio Pro folders and I still get the error messages and the program freeze. Any help would be appreciated.

Solved the problem. I had to clear out all files from the "Movies" folder. Still a bit annoying that the program won't launch without having all of the files.

HELP! DVD Studio pro shows a 3GB movie as 88GB!

I am realy in deep troubles!
Doing a (volentary) documentation about my city, the final doc movie will be shown at 7.januar 2006.
Since 1 1/2 year i am working on DVD projekt and nearly finished.Suddenly DVD Studio pro goes crazy.
I have a lot experiances with iMovie and iDVD but not with Production Suite (FCP + DVD Studio pro) .Maybe i have some misstakes done with FCP or DVD studio pro. But i can't see what and why because during this periode i have burened and check it on TV couple of times bevor.I could cry.
Just have upgraded to the newest Production Studio pro Version and same result.
Ok, one thing i have changed, and later the Problems stared!
In DVD Studio pro you can say how much motion you have.
small, meduim,often i guess (have it in german)
This setting worked and i could one time burn a DVD.
I can say the quality was better, better color and less noise or moire.
I changed it back, but no success.
I have seen in the forum discussion about audio which might
doe troubles and some advises using a.peak tool.
I have checked the aiff files and there are terrible big!
350 MB the biggest. I am totaly confiused because it worked bevor. Have checked the sequenzes from FCP which still works.
What would you suggest first befor i jump out of the window.
Many thanks for any helping hand
Sven

Finaly i have solved my problem!
The forum and the helpers did guide me in the right direction.It was not logicaly to me why it work again.
With FCP i could view the sequenz correct.
Then i used compressor-2 with DVD Best Quality, 90min 2 Pass 90min. Best motion. GOP closed.
The output i imported into DVDStudio pro.The import was about 4 minute while bevor it was a few seconds!
I did "clean up" DVDStudio Pro removoed the dvdstudio....plist file -> same result
I did start a new FCP projekt with a new Sequenz, imported all the work i have done befor (lot of work)
and used compressor again.
Then i imported with DVD Studio Pro the compressor files
(this time dolby ac3 audio file) and the import was done very quick.
I could burn the dvd (2.3gb instead of 88GB) and a first quick look this (very early) morning was good!
I chosed this way because i am not sure does working with multiple projekts (not sequenzes) can disturbes the other projekts if they use the same movie. So i will continue with a Projekt, finish them, and start the next from scratch. Hope have no problems like this again ...
regards
Sven

Playback of DVD Studio Pro 4 built SD video file - Menu 1 screen is WHITE!!

I recently upgraded from FCP 4.5 with DVD Studio Pro 3 to FCS with DVD Studio 4. I have resolved a number of problems with the upgrade by reading "Apply Discussions", however, I need help with the following: When I import my mpeg2 and AC3 files into DVD SP4, I use the DVD SP4 palette to select an Apple Template for my MENU 1. (I like the "Theater Interior" menu template.) When I view the final product with the DVD SP4 simulator, everything is great including the colors in MENU 1. So, I build my program onto my desktop, the same way I did when I had DVD SP3. Now, the problem begins. When I view the built video TS file on my G5 Apple DVD player, or format it to a standard DVD-R with my pioneer 106D burner and play it back on my in-house DVD player, when the program MENU 1 is displayed on the monitor, it is WHITE in color. The menu is set to times out in 20 seconds. Once that happens, the programs runs perfectly. However, what's with the white menu screen? I can barely make out the buttons. When I click on a button, it operates and the color and program work perfectly from that point. I there an option to get rid of the white screen when the menu comes up? Somehow, when DVD SP4 builds the video file, MENU 1 is encoding with a white background rather than with the colors of the Apple template in use. This did not happen with DVD SP3. Can you help me?
Ugene

try switching the menu encoding from software to hardware (or vice versa) in your DVDSP preferences and see if that makes a difference for you.

DVD Studio Pro won't burn disk

I have a DVD Studio Pro file that used to burn without a problem, but now it won't at all. I found all of the files necessary, but when I click the burn button, I get a warning:
The Build Location folder contains a VIDEO_TS folder(standard DVD content). You must remove the VIDEO_TS folder from the Build Location in order to proceed with Build/Format of a HD DVD project.
I wouldn't know where to find this Build folder anyway. I am not sure what to do at this point.
Can anyone shed some light?
I have a 2010 2.66 GHz Macbook Pro Core i7
Thanks!

Are you trying to build an HD DVD rather than a standard defintion DVD? I've never tried to build an HD DVD... does that format also use the VIDEO_TS structure?
A simple alternative to finding and removing the troublesome VIDEO_TS folder is to select a new location for the build -- an empty folder on your desktop, in your documents folder, wherever.
Or, if the contents and/or design of the disc hasn't changed since the last time you built it, find the current VIDEO_TS folder and use that to burn your disc rather than building it anew.

IPhoto won't import .mov files from iPhone

I'm trying to import the photos and videos from my iPhone and the following screen shows up:
I've only had this trouble since updating to Yosemite. Any help is appreciated.
MacBook Pro (17-inch, Mid 2010)
8GB Memory
2.53 GHz Intel Core i5

There are many, many posts of this nature in these forums. See, for example:
iphoto won’t import mov video
For many, rebuilding the XPC helper cache solves the problem off the bat. In terminal try this, and reboot:
sudo /usr/libexec/xpchelper --rebuild-cache
The above posted by Andy Ball on a thread related to a similar problem with Aperture:
Re: Import video to Aperture library on Mountain Lion
Other things to try:
1. create a fresh iPhoto library and try that. (hold down opt while launching iPhoto)
2. create a new OS X user (in system preferences) and try there.
In my case – and many cases – neither of those things work either, which means the problem is system wide. Again suggesting that the xpc helper solution might work. But for me it did not either.
There are other suggestions that there are conflicts with Perian (on Yosemite) and flip4mac. In my case uninstalling both of those didn't solve it either.
So maybe one of those solutions will work for you, results apparently vary. But this is a huge unresolved issue many others are having as well. I have a case with a senior apple advisor open, still unresolved. His suggestion of course, at this point, is an archive and re-install. I'm not ready to go there yet.
BTW, another thing he had me try was to import the file with Image Capture (which works). Then open it in QuickTime Player X. Then try exporting to 480p. Does QuickTime crash? It does for me.
My summary:
1. Files successfully import with Image Player.
2. Files play with QuickTime Player X.
3. QuickTime Player X crashes when exporting to 480p.
4. Files import with iMove.
5. Files fail to import with iPhoto (unrecognized format as with OP)
6. iPhoto import failure/errors are system wide and not specific to a library or a user.
7. rebuilding xpchelper cache and rebooting in my case does not resolve issue.
8. same videos import fine in iPhoto on a totally different system (laptop running same versions of OS X 10.10 and iPhoto 9.5.1)

DVD Studio Pro won't build right!!!

Hi,
I finishing my portfolio for college. And I getting problem after problem. I am using a Mac Pro 8 core leopard, final cut pro 5 and dvd studio pro 3. First I could import mpeg-2 to studio pro 3 that it would crash. That I upgraded to version 4 and updated as well. Then I could import mpeg2 to DSP but it would play strange, with half of the screen in green. I solved the problem exporting in mpeg 2 from after effects instead of final cut. I checked quicktime on export and the mpeg 2 wasn't there anymore like it was before. But I could export on final cut and after on mpeg2. After all that, imagine what happen. I finish all my portfolio, build to my HD, try to play on dvd player and it happened the same thing with the videos as before. Came up with the green part.
I don't know what to do anymore. I was going to try to start from scratch. Install the leopard or tiger on external hd, install final cut and dvd studio pro. And see what happen. Should I install DSP 3 or 4, tiger or leopard?
If anyone know the solution or have a suggestion, please help me!!! I don't know what happen, I never had this problem.
Thanks in advance!

Welcome to the Boards
Holf wrote:
I finishing my portfolio for college. And I getting problem after problem. I am using a Mac Pro 8 core leopard, final cut pro 5 and dvd studio pro 3.
FWIW ... FCP 5 and DVD SP 3 are not officially supported on Intel Machines. Also Leopard has issues and should be installed via erase and install.
First I could import mpeg-2 to studio pro 3 that it would crash. That I upgraded to version 4 and updated as well.
Which Version 4 (4.0.x. is not universal binary for intel machines.)
The green sounds like a corrupted file or Codec issue...

DVD Studio pro won't open

Just upgraded to Leopard and my DVD Studio Pro 3 and compressor won't open. It starts to open and then shuts down. I have repaired permissions, deleted preferences, and re-installed the programs. Everything else at the moment seems to run fine. Any suggestions?

You're not alone. Last week my DVD Studio Pro, which I use all the time, worked perfectly. Then over the weekend I upgraded from 10.3 to 10.5.1 and I can't load it at all. I get the logo box, then it seems like it just hangs. This happens no matter how I try to open a file or launch the program.
The only other program I know I'm having problems with is iDVD, which I turned to in desperation after DVDSP stopped working. Unfortunately, iDVD crashes every time I launch it. I'm an editor, not a computer programmer, so I'm afraid I'm in real trouble here.
I wish I hadn't upgraded. Everything was great until I went to Leopard. This is the first major problem I've had since I switched from PCs to the Mac platform 5 years ago. Hopefully a fix will be as easy as the rest of my Apple experience has been, but I'm extremely frustrated and desperate right now. PLEASE HELP!

DVD Studio Pro won't accept my H.264 QT asset

Hi, I want to import my HDV 1080i FCP project into DVD Studio Pro v.4.2.1 to create a SD Disc. I exported the FCP project in Compressor using H.264 10.3mbps in the HD DVD: H.264 60 minutes folder. I was able to import the audio asset but not the video asset. Any idea why I cannot import this into DVD Studio Pro?
When I export this as MPG2 best quality and import it into DVD studio pro, formatting for SD (I have to make an SD dvd from my HD source material), the quality looks AWFUL. like a cheap camcorder.
Running out of options....

A HD DVD will only play back in your Mac and the now obsolete Toshiba DVD-HD set top devices.
A standard DVD will play back on any DVD Video device.
the quality looks AWFUL.
You are compressing to MPEG 2 and throwing a lot of pixel information away -going from 1920x1080 to 720x480. There's no way that it can look the same.

DVD studio Pro won't import .mov files

Similar Messages

Maybe you are looking for