Dvd to dv to dvd

i have been told that if you change a dvd to dv ....when you finish and want to convert back to dvd...the picture isnt exactly the same....how can i resolve this

Assuming you're trying to get content from a dvd, that content must have originated from minidv tape (most likely), or a variety of other sources including recordings from hard disk camcorders, dvd camcorders etc.
If the DVD you're trying to change to DV started off life as mini dv tape, you'd be better trying to get these source tapes and editing directly from these which at least removes the level of compression first applied when the original dvd was made.
What is the original source of recording? Did it come from DV tape, hard disk camcorder, dvd camcorder or what? If you don't have access to the original source material, you'll be stuck with the extra level(s) of compression and the consequent quality loss. Obviously you need to have permission to use the material - no Hollywood blockbuster DVD ripping - that's illegal.
It's difficult to advise the best course of action without more detail.

Similar Messages

MyiMac wont let me open DVD Player. It's brand new. Every time i put a dvd in it says 'dvd player quit unexpectidly'. what do i do?

MyiMac wont let me open DVD Player. It's brand new. Every time i put a dvd in it says 'dvd player quit unexpectidly'. what do i do?

Same here on a brand new 13" Macbook Pro (Mid 2012) running Mountain Lion. DVDs play fine using VLC media player but not the default player that comes with Mountain Lion. Will visit my Apple store next week.

How can I convert my iPhone 5 movies to a DVD to play in DVD players?

How can I convert my iPhone 5 movies to a DVD to play in DVD players?

Here's one way:
https://itunes.apple.com/us/app/video-to-dvd/id569680533?mt=8&ign-mpt=uo%3D2
Or, you look for software like this:
http://www.aimersoft.com/how-to-burn/iphone-video-to-dvd.html

Intel iMac SuperDrive (Matshita DVD-R UJ-846) DVD Burning Problems

Hi there:
Having a strange problem burning DVD's now. I have a January '06 intel iMac Core Duo 2ghz, 2GB RAM. My DVD burner suddenly no longer will burn DVD's. When I put in a blank DVD-R, it just spins for a bit then spits it out, no prompt or error message. When I put in a blank DVD+R or DVD-RW, it gives me the usual prompt that a blank DVD has been inserted and asks how to handle it. But when I try to burn, it opens the session, then quickly finishes the session (without any burning) and spits the disc out with an error that burning failed because of an inability to calibrate laser power level for the media. Sometimes it says due to a media error. It also will not read a previously burned DVD data disc, including the OS install DVD that came with the computer. It will however, read and play movie DVD's, and also reads and burns CD-R's with no issues.
I've tried the following fixes with the following results:
1) Change media. Have tried several different types and different brands. No success.
2) Burn DVD's from an external firewire DVD burner. Works fine.
3) Hardware Test via the install DVD (on the external firewire burner). No problems found.
4) Did a fresh install of the Tiger OS onto an external firewire hard drive, booted from that, and tried to burn. No success.
5) Tried burning from Disk Utility and Finder. No success.
6) Put a cleaning CD into the drive and let it run. Still no success after.
System profiler says the drive is ready to burn CDs and DVDs. CDs work, DVDs don't.
Any ideas as to what could be causing this and how to fix?
Thanks!
--Equus

If you guys did a search on the optical drives you'll discover that they have a rather extensive
history for failure. the failing optical drive process starts off rather slowly and worsens over time.
You could replace the internal optical drive but rather than performing surgery on your Imac
you would be better off going with an external optical drive.
If your IMac is still under warranty you can have it replace but I would still pick up an external
as well, I have read a couple of threads where even after having the internal replace the same issue
happened yet again.
I ordered a LaCie that does rather well.
http://www.amazon.com/gp/product/B001P5C9S0/ref=oss_product
I did however discover a couple of minor issues with my LaCie...
1) When the mounts a disc , for some reason the mechanical ejection button
on the face of the enclosure is disabled. This is not a major issue right click and eject or, drag the
icon into the trash
2) if you are wanting to lightscribe be sure to go to the LaCie website and download the latest
lightscribe app, the one that came with mine was out of date and did not work in Mac OSX 10.6
3) My lightscribed DVD's had a problem , the images where filled with rings from the center of the
disc out, I have discovered this is due to calibration , Amazon has shipped me a new Lacie that
I have sitting in a box next to me, I have not had a chance to test out the new unit yet.
You may also look at OWC's optical drives
http://eshop.macsales.com/shop/firewire/optical-drives/
Either way make sure that you go with an optical drive with Firewire.
James

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

DVD drive stopped writting DVD's on my Satellite 5200-801

Quick question that I hope someone knows the answer to. My DVD drive stopped writting DVD's a while ago (several system reinstalls have proved that it is the drive and not a driver error/conflict) So I got hold of another drive. Fitting was easy however it appears that there is something funny with the ide chain configuration in this laptop. The old drive was set on cable select, however the new drive is set as slave. because of this neither the HD or the DVD drive are accessable.
Does anyone know how to switch dvd drives to cable select to make them work (I tried putting jumpers on the HD to change it between a master and slave but with no joy.)
Thanks in advance
John Walker

Hi John,
Normally, slim design CD/DVD drives are preset by the manufacturer but it is apparently possible to change the setting if you really want to. Please check out the following post :-
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5946&messageID=20727#20727
HTH

Dvd not playing on dvd player

Burning the dvd works and the dvd plays fine in the computer, but it doesn't work on my dvd player (or the other two that I tried it on...all relavtively new dvd players. I think my settings may have changed or something? any suggestions? I'm exporting my clip as a quicktime and just dropping it into idvd. thanks so much!!

I see this is your first post. You have a problem which keeps coming up and I'm not sure I have see a definitive solution.
First, DVD players re designed to accept commercial DVDs and DVD-Rs are a sort of extra so they don't read them with the same certainty.
Some suggest trying different brands, verbatim is a popular choice.
It is always worth burning a slower speed than the disc rating, this appears to help.
My favourite hint is to quit all other applications whilst burning the disc. Particularly internet connection if you run an application like Entourage which accesses the net at regular interval.
Show respect! you are asking the system to burn over 32,000,000,000 and only a small number of errors will spoil the disc.
I hope this helps.

DVD DL with a DVD-rom part

Hi,
With DVD SP 3.0.2, I'm trying to burn a DVD-DL, containing a DVD-video part (2,1 Go) and a DVD-rom part (4 Go). The layer is set to Dual and the Break Point is set to Automatic. DVD SP reports an error :
"Formatting Failed.
Formatting was not successful. A suitable marker could not be found in the required layer break range. See DVD manual for more information."
I think that the problem is that the DVD-rom part is bigger than the DVD-video one, and a marker can only be on the video part. As layer 0 needs to be larger than Layer 1, the break point should be on the DVD-rom part. DVD SP3 seems unable to do this. Does further versions of DVD SP can do it ?
I also thought of burning with Toast, but I don't think that Toast will include the DVDaccess function. Am I right ?
If anyone as an idea that could help me...thanks !

Do you have any markers in the video towards the end of the video? If not try adding one and seeing if that helps.
How big is the video? (size) Did you do a build? You could also add/duplicate the track and add chapter markers in there to force things if needed.
Take a look at these threads, there are others but this should help..
http://discussions.apple.com/thread.jspa?messageID=8096861&#8096861
http://discussions.apple.com/thread.jspa?messageID=7721738&#7721738

DVD+R vs. DVD-R?

Okay, can someone finally tell me the difference between DVD+R and -R? +R seems to work better for me but I've read on this forum that -R is better. Help, please! I don't understand.
Pablo

I use iMovie 06 with iDVD 08 to make DVDs.
I have found DVD+R to be more reliable than DVD-R. The only disadvantage to DVD+R is that DVD players manufacture before 2003 may not play them.
DVD+R disks are better than DVD-R disks because of the increased error correction technique used for the +R type.
http://www.cdfreaks.com/reviews/Why-DVDRW-is-superior-to-DVD-RW
I would recommend Taiyo Yuden DVD+Rs. (I get excellent results using iMovie 06 with iDVD 08.)
Burning too slow is often just as bad as burning too fast.
I burn at 4X using 8X DVDs.
http://www.digitalfaq.com/media/advancedconcepts.htm

New FireWire DVD Burner Plugged In - DVD Player Wants To Change Region?!

I have just bought an external Freecom FW/USB 2.0 DVD Burner.
As part of my testing, I inserted a DVD-R video I had made and attempted to view it via DVD Player.
However, I got a warning window saying that as this was the first time I had played a DVD I would have to set the region.
This DVD is a home-movie and as such has no region.
Needless to say, the DVD plays perfectly when using the Superdrive.
If I did set the region would it only apply to the Freecom or would it be one of the 5 changes you are able to make to the Superdrive?
Is every DVD burner allowed 5 changes of region?
I have not attempted to change the region as normally I will not be using the Freecom to play DVDs . . . . . just burning and copying.
What exactly does changing the region affect? The DVD Burner, my iMac, DVD Player or what?

Hi Ian,
most if not all computer DVD drives allow up to 5 changes of the region code with the 5th being the last and permanent one.
The region code itself is saved inside the drive itself and each drive is 'for it's own'.
http://en.wikipedia.org/wiki/DVDregioncode
As for your home video DVD you might wanna have a look here http://en.wikipedia.org/wiki/DVDregioncode#Circumvention
Regards
Stefan
Message was edited by: Fortuny

Copy-Protecting DVDs against piracy in DVD Studio Pro; or otherwise ?

Copy-Protecting DVDs against piracy in DVD Studio Pro; or otherwise ?
I'm about to start encoding to MPEG2 a very important project that I've edited in Final Cut Pro.
It is vital that it cannot be copied by the client or I could lose a lot of money.
In the past this has never been a concern, but in this case it is very important.
What is the best way to prevent a client/people from copying your DVDs?
Is there anything I can do within DVD Studio Pro or is there anything the Replication house can do at the Glass-Mastering stage?
I'm sure this topic has been covered, but a quick search found nothing.
Thanks guys.

Common problem but no easy answer. It's simply too easy to get around.
If you want to prevent finished master disks being copied in the same way commercial disks are then you will need to get them made at a duplication facility. Not cheap. You can't do it in DVD studio, it's to do with the disk burner.
On a feature film it is very important to prevent copies of work in progress. What a lot of cutting rooms do is make dvd's with the name of the person burnt in and a copy number. Often a large X with 30% opacity is put in the middle of frame.
This can't stop copies being made but at least you will know where they came from. It also seems to make the person who's name is burnt in take more care.
Sorry but thats the best I can offer.
John

I want to use my home dvd player to burn dvds/cds onto my MacBook Air. Please help!?

I want to use my home dvd player to burn dvds/cds onto my MacBook Air. I have an hdmi cord with thunderbolt connector. Where do I go from here?

Apps for OSX aren't in iTunes: they are in the App Store in your Applications folder. The payment method is the one registered in iTunes. There's no app actually called Yoga Studio, though there are several Yoga apps. There is an iOS app called Yoga Studio but it appears to have no OSX equivalent, though I haven't done a detailed search.

Playing dvd's on a dvd player

I have some home movies that I have moved from my I phone to the mac. I have tried to burn them to disc but the disc will not play in my dvd player. What do I need to do?

Hi
a. in iDVD do a "Save as a DiskImage" and test this
b. When OK - burn this on good quality brand of DVD -
• I use Verbatim
• DVD-R
• set down burn speed to x4 max
Yours Bengt W

Creating DVD Chapters from within DVD studio Pro

Hey,
Is this possible? Can we create DVD chapters from within DVD Studio Pro?
Chris

Yes, you can add chapter markers in the DVDSP timeline, although they are not frame accurate as they are in FCP. You'll typically get them within about half a second as they can only sit on a 'GOP' boundary, and these occur roughly every 15 frames equivalent.
To add a marker you move the playhead to where you want it and type the 'm' key, pretty much as in FCP.
The chapter marker then defines the start of a chapter for playback. You can manipulate the navigation such that only one chapter plays before you go back to the menu, or you can start at a marker and continue onwards. You can even create lists of markers that are not in track order and have playback jump about between them, although it's not always wise to do so!

Title safe different from dvd player to computer DVD player

I have a title problem where I have a screen divided into three sections. I have a title on the top right that needs to be centered in own space . I have marked where a set top dvd player cuts the video off, a little more than action safe. I centered the text based on that. Problem is if someone plays the dvd on a computer dvd player nothing gets cut off and the title looks off center. Any ideas?

take2visualmedia wrote:
I have marked where a set top dvd player cuts the video off
No, you've marked where the display you used cut the video off.

I was writing to -R dvds fine from blank dvds purchased last year. Inserted newer purchase -R dvds and MacPro spits out dvd. Why won't my computer now accept -R blank dvds?

I was writing to -R dvds fine from blank dvds purchased last year. Inserted newer purchase -R dvds and MacPro spits blank dvd back out. Why won't my computer now accept -R blank dvds?

Likely either the batch of media is defective, or the drive itself is not working.
Swap for different media; for a different batch from a different vendor, and also try +R media.
The slot-loading drives on various Mac systems can and variously do fail. If different media doesn't work, then you probably have a failed drive.
If your Mac is of same the vintage as OS X v10.4 that's listed in your footer and you're not in a position to replace or repair the optical drive in your Mac, then you might consider using an external USB CD/DVD device. If you don't have another Mac around to perform the recording on, that is.

Dvd to dv to dvd

Similar Messages

Maybe you are looking for