DVD To DVD

I want to make a copy of my DVD Can anyone help me?

Hi Sandi--
Depends on the DVD...
Is this a dvd that you made? If so check out this site:
http://docs.info.apple.com/article.html?artnum=42724
If it's a "Commercial" dvd, can be done, but we're not allowed to discuss that info. on this site.
Hope this helps.
T.

Similar Messages

Aspect ratio problem in Windows Media Player for DVD from DVD Studio Pro

So I made a DVD with DVD Studio Pro and it looks good in Apple's DVD Player, on an Insignia DVD player appliance and on Playstation 2. Both the movie and the deleted scene were 16:9 from camera to Final Cut Pro and they show that way in all these players.
But on Windows Media Player for Windows XP, the program thinks the movie is 4:3 and the deleted scene is 16:9. Nero's Showtime has the same exact behavior, but at least you can force aspect ratio on Nero.
Besides being longer, the movie is different from the deleted scene in that the movie was originally out of Final Cut Express on an older Mac and it was encoded big endian. The deleted scene was output from Final Cut Pro and encoded little endian. I didn't think it would make a difference, but I tried outputting the movie from Final Cut Pro on the newer Mac and it did come out little endian. I took that into DVD Studio Pro, got rid of the old VIDEO_TS folder and re-built the project, burnt a new DVD. Then I went back to Windows and...
...the same exact problem. Some of the people I give this DVD to will be using Windows Media Player to view it, which is why I want this to not be an issue at all. What am I overlooking?

Look, everyone here (who each have been creating DVDs for over a decade) is telling you the same story. WMP is buggy. Everyone in the industry knows that. Hardware manufacturers like Dell and HP, know that. Why don't you use the DVD player program that they put on the hard drive? Sure one "Hollywood" title works. Did I mention that WMP is buggy? Test a thousand titles, and I'm certain that you will find some discs have problems on WMP, and WMP alone. (And it isn't my assertion that Hollywood DVDs have issues in WMP, everyone is telling you that.) No one has a solution for this, except to not use WMP. Let me repeat once again, no one has a solution for this except to not use WMP. It is impossible to add any sort of programming to the disc that will detect which player is being used to play the disc and compensate for the problems of that player.
Let me put it this way, if you have a disc that plays fine on Zeus's device, and on Apollo's device, and on Hera's device, and on Hermes' device, and on Artemis' device, but you have problems with Athena's device, then logically, Athena's device has a problem... not the disc. Your own experience has proved this to be true. If you were having problems with every device used, THEN you could rightfully say that there is a problem with the disc.

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not

After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.

Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can I create a DVD in DVD SP from a keynote presentation? I looked at old posts but don't see a good solution. Thanks

Can I create a DVD in DVD SP from a keynote presentation? I looked at old posts but don't see a good solution. Thanks

This is all the files Pages needs:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Overwise click on my blue name and email me.
Peter

Finder/Disc Utility/Toast Will Not Burn DVD+R, DVD-R

I have an iMac that will no longer burn DVDs. I've tried various brands of DVD+R, DVD-R and DVD+R DL all of them do not burn in the finder, disc utility, or Toast. CDs burn fine. DVD+R DL discs burned previously with this machine will no longer mount. I just wiped the hard drive and reinstalled OS X and ran all updates and still have the problem.
Media brands tried: OfficeMax, TDK, Maxell, JVC, Sony.
Thanks in advance!

Hello StraightUp and others
Check thru this Disc Burning Quick Assist link, there are some good troubleshooting tips in it.
http://docs.info.apple.com/article.html?artnum=303599
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

Making 5.1 DVD in DVD Pro

Hi,
Do you know how to make a 5.1 surround sound DVD in DVD PRO?
Thanks
Elad

When I was looking to do the same I didn't find a tutorial, but cobbled together the how to from various sources. Some things I learned:
DVDSP will be a 5.1 project if the aac audio is a 5.1 mix. The key is how to get a 5.1 mix. I used STPro which can output an aac track directly (no need for compressor). There are a number of steps inside Soundtrack to configure and output 5.1 inclusing setting each track to 1-6 output, setting the bus to 1-6 outputs and setting the master output as 1-6.
It's also possible to setup FCP for 5.1. As above I used STPro.
Hope that helps.
-Bill

Mac pro DVD Writer + DVD Studio pro + Toshiba HD-EP10 - HD DVD Player !!

Hi there..
I tried to make a short HD project in 4.7GB DVD by Mac pro Standard DVD Writer and i tried to play it in Toshiba HD-EP10 - HD DVD Player ( it gives msg ... the disc not contained DVD format and cannot be played ) so what is the mistake which i maded??
Mac Pro DVD writer can Burn HD Project OR should i by HD DVD Burner?
Can i make HD DVD in 4.7GB DVD?

NAWAF65095 wrote:
ok
how about the HD DVD Burning .. should i buy HD DVD Burner or the mac pro DVD Writer will solve this problem? and it will burn HD DVD SL-15GB and DL-30GB ?
You cannot burn a 15 or 30 Gig DVD from DVD SP and it is not supported by DVD SP. You can build those to a hard drive for replication
also what is the basic steps to creat the HD project in HD DVD not the DVD 5 and compatible with the toshiba player?
Best Regard.
You can make a HD DVD on the DVD 5 which will play with the Toshiba and it will give HD quality (and will not play on an SD player) video results, though you cannot author the extras that HD has (the new features in HD as compared to SD DVD), pretty much menus and playback of video. The steps above will create the DVD 5. Have not tried writing to a DVD 9 size for more running time

How Can I Make a High Quality HD DVD Video (dvd vob)

i work a hd project and after we will make a dvd video. if i export a mov and convert it with toast titanium the quality is bad. if i make it dvd studio pro hd dvd mac and pc is open but dvd player does not play it. and the other version dvd studio pro convert from 16/9 to 4/3. but i don't like it. the other one i send to compressor and chose the dvd/hd dvd:mpeg-2 30 minutes it exports mv2 not vob(audio ts video ts)
so i want to make a high quality hd dvd video how can i do that?
thanks
Message was edited by: rec_off
Message was edited by: rec_off

I don't know about NTSC but there is a nice PAL solution for SD 16:9 for ordinary DVDs. The 16:9 image becomes 720x576 pixels. So the pixels are each quite wide, and the horizontal resolution is less than the vertical resolution, but at least no pixels are wasted as with letterbox.
A semi-solution is to make a HD-DVD. That format has been abandoned but Apple software pretends otherwise. Apple Compressor does compressions at around 20 Megabits/second data rate specifically for HD-DVD, and Apple DVD Studio Pro makes HD-DVDs. For short projects, less than around 30 minutes, the HD-DVD can be made on a normal DVD. (I did this for a 40 minute project by cutting the bitrate somewhat.) The quality is almost equal to Blu-Ray, but who can play it? People with well equipped Apples can.

DVD drive has DVD stuck and will not eject or read DVD? DVD is 4 months old. What do I do?

DVD drive has DVD stuck and will not eject or read DVD? DVD is 4 months old. What do I do?

Try issuing this command in the Terminal application followed by the Return or Enter key:
drutil eject
Might take several attempts
OT

How to make direct DVD-to-DVD copy?

I'm hoping this is easier than I'm making it. I work for a small theater that films every show in a weekend on 4 camera angles plus a multimedia feed. We record every angle directly to stand-alone DVD recorders (5 DVDs per show).
I get requests from the directors to view the shows each week, and up till now, i've been dutifully using Disk Utility to make an image file of the DVD to the hard drive, then burn a new blank DVD, but this process takes about 25 minutes for every show, not to mention the disk space, and increased requests are making this too time-consuming.
*I've got 2 DVD-writable drives; isn't there a way in OSX to directly copy a non-copy-protected DVD directly to another DVD? Wouldn't that be a big thing on the new Mac Pros that have 2 internal Superdrives? I tried doing it in Finder by copying one DVD and pasting it in the blank DVD, but that didn't work.*
If not, is there software anybody recommends? Nero for the PC does exactly what I want but doesn't come in Mac. I'm not sure if Roxio Toast does it, and I haven't found a demo of anything else that works... (tried Fast DVD Copy, but it won't stop "analyzing media" and "Aimersoft DVD Copy for Mac" doesn't download a file that my mac will open.)
Thanks for the assistance!
~Trav

So far as I can tell (and the only thing that comes up in Disk Utility Help) is the method which requires an image file to be fully written to the Hard Drive and then burned to a blank DVD. I'm hoping to get that down to one step, DVD-to-DVD...
Any thoughts? It seems ludicrous to me that OSX would not have this ability natively.
~Trav

Burn from DVD to DVD on Mac

I must admit, I have never done this before. Is there a program built into OS X or freeware I can download to burn from a DVD to DVD. I believe the DVD contains PowerPoints and other files. No, I can't get the PowerPoints off of the DVD...when DVD is inserted it just has a menu to access the PowerPoints.
Thanks so much for your help in advance. PC solutions welcome as well but I am more comfortable doing this on a Mac.
Sincerely,
Phil

Open Disk Utility in your Utilities folder. Select DU Help from the Help menu and search for "Duplicating a CD or DVD." Locate the article of the same title where you will find instructions on how to duplicated a CD or DVD.
If you don't wish to duplicate the DVD but simply copy a few files to burn to another DVD, then create a new burn folder (search Mac Help from the Finder's Help menu.) Drag the files you want from the source DVD into the burn folder. The help file for creating a burn folder is followed by instructions on how to burn the contents of the folder to a blank disc.

HD DVD SD DVD dvd studio

Ok so after burning an HD DVD and it not working in any of my dvd players I did a little research to find out that you have to burn SD DVD.
Ok so backtracking a bit... First I compressed in FCP under the option of HD for dvd studio. The problem is that file will only import if my preferences are set to HD DVD in dvd studio. So in order to import to SD DVD in dvd studio what should I compress a HD movie to? I would like to retain as much of the HD quality look if possible.

You need to export from FCP as SD. Try exporting to Compressor and using a standard preset to create your M2V and AC3 audio files. As long as you keep to the dimensions Eric stated, and the bitrate for encoding in Compressor is below 9.8mbps, then DVDSP should import into any SD project.
HD is long since dead as a DVD format, with Blu-Ray the dominant high def format. However, you can't create a BD disc in DVDSP... so we're stuck on SD for now.

Cannot burn DVD in DVD SP

I am trying to burn a DVD using DVD SP
I am taking the following process.
Export to .mov file from FCP
.mov file approximately 12 gig into Compressor
Compress file using the best 90 2 pass best VBR . average bit rate 6.2 mbps and maximum 7.7 mbps
Resulting files are .m2V and .ac3 respectively
I connect all elements in DVD SP and test with simulator. All working OK.
Proceed to burn (I have tried with both -r and +r DVDs) I have no luck. I get a message saying the DVD was unsuccessful. Not even the muxing process takes place.
Any suggestions would be greatly appreciated.

Are you getting a bitrate too high error?
Did you set the First Play? Have you check all of the links? Did you check your preferences? Is it set to SD DVD? Do all of your tracks have video?

Do I need DVD+ or DVD- to burn movies?

I'm trying to burn a DVD on my MacBook Pro. Do I need to buy DVD+ or DVD - ?

In case you want to delve deeper into the question:
More information on DVD-R v. DVD+R here:
http://www.answerbag.com/q_view/2279
http://www.diffen.com/difference/DVD%2BR_vs_DVD-R
Just as important, if not more so, is the quality of the media. Most users here recmmend Verbatim or Taiyo Yuden DVD-R:
and (about coating quality):
http://adterrasperaspera.com/blog/2006/10/30/how-to-choose-cddvd-archival-media
and that last article includes information on where (in the US) you can buy Taiyo Yuden media.

What compressor settings settings are best for 1080i to output to DVD using DVD Studio pro?

What compressor settings settings are best for 1080i to output to DVD using DVD Studio pro? I used FCP 6, exported using Quick Time.

DVDs are only SD. There was at one time HD-DVDs, which DVD SP and Compressor can make, but HD-DVDs will only play in Macs and, now obsolete HD-DVD players. HD-DVDs will not play back in standard DVD players or Blu-Ray players. If you want to make a "DVD will be played on DVD player for TV" disc, your only choice is SD.
If you want HD video on a disc, then you want Blu-Ray. You will need a Blu-Ray burner (Apple does not make a Blu-Ray burner so you will have to buy a third-party Blu-Ray burner), Blu-Ray discs and software that will make a Blu-Ray disc. That could be the latest version of Compressor, or FCPX, or Toast, or Encore.

Universal DVD (DVD-A, DVD-V) scripting issues

I am in the process of making a DVD for playback in both DVD-A and DVD-V players. I am using DVDSP4 and Minnetonka Disc Welder Chrome. The DVD-V has both AC3, and DTS audio streams, and the DVD-A is MLP. Both versions are done, but when I try to import and burn the VTS file from DVDSP4 into Disc Welder I get this message:
A VTS with pre commands is not legal for VIDEO_TS import. (VTSPRE_CMDNs).
A VTS with more than one post command is not legal for VIDEO_TS import. (VTSPOST_CMDNs).
A VTS with pre commands is not legal for VIDEO_TS import. (VTSPRE_CMDNs).
A VTS with more than one post command is not legal for VIDEO_TS import. (VTSPOST_CMDNs).
I spoke to tech support @ Minnetonka, and they said it's an issue in DVDSP4. I assume it's a scripting problem, but I'm not sure (they're not very helpful @ Minnetonka.)
Any help is appreciated.

You can't use dvdsp4 (only) for those types of projects. You need to use a spec based app for the DVD-V part of a project that will be for DVD-A & DVD-V. DVDSP is an abstraction layer tool, it does all the domain layout, PGC structuring, command sequences for you when you click add Track, set an end jump etc.
You have to use Sonic Creator(OS9 only), Sonic Fusion(OS9 only) or Sonic Scenarist(Win only) as they are spec based apps. They aren't cheap either and if you don't know anything about the 'spec stuff' there is a steep learning curve.
Another option is to try deleting all the commands and re-authoring with a Editor. DVDAfterEdit(OSX only) will let you open your dvdsp build and re-program things. MyDVDEdit may be an option also...
Related:
http://www.sonic.com/products/Professional/Scenarist/default.aspx
http://www.dvdafteredit.com/
http://www.mydvdedit.com/
Other:
http://www.dvd-replica.com/DVD/domains.php
-Jake

DVD To DVD

Similar Messages

Maybe you are looking for