DVD to E90

What's the best program to use to make a copy of a DVD movie that's watchable on an E90? Preferably freeware, but not necessary...

I stumbled upon this site which talking about ripping any dvd, there are many tips about ripping dvds, including converting dvd to MP4 or 3GP compatible with E90 ...

Similar Messages

  • Sync Options using E90 triggered via Phone over bl...

    I have newly bought E90 hand set. So I am very new to the setting and other options available with E90.
    The scenario I would like to achieve is:
    1. Use my phone to trigger and synchronize to my Calendar and to do calender/to do items in Lotus notes on my PC.
    2. Use my phone to trigger and synchronize to my contacts on outlook express in my pc.
    The major catch in above is that I need to trigger this synchronization using my phone ( may be sync profiles) and not using the PC suite application synchronize button.
    Can someone tell me how do I do this and what all do I need to feed into the sync profile setting on my phone.
    Thanks a lot

    Hello,
    First, I have to apologize for my bad english, my mother language is french.
    Most of my applications I use are in french.
    I shall try to help you to my best.
    You have to :
    1 Install on your computer Nokia PC Sync
    Help is given, if I remember well, on the DVD selled with the device. You can also download the application (6.85 Version) from Nokia Website.
    2 You can use Bluetooth or USB to bind the computer to the device.
    Your computer must have a name.
    3 Once you are tied between the device and the computer you must configure Nokia PC Sync. This must be done once.
    Help is given with the application for each possibility.
    You have to indicate :
    1 Outlook / Lotus(?)
    2 the data you want to synchronise (Contacts...)
    3 the direction of the synchronization
    4 where the data must go within Outlook
    Other possibilities exists...
    Once this is done, begin a synchronisation PC -> E90.
    If it works try the other direction using the "Sync" application you will find on your E90.
    In my hands, it works perfect. Good luck ! !

  • E90 Hangs after restart.... Requires Hard reformat...

    Hi Guys,
    Any one faced problems with E90 Phone getting hanged after restart.... It hangs up at the boot cycle..... You have to hard format using * + Call + 3 + Power on button to reformat it.
    But after reformating it after i restore my data, after restart it again hangs...
    Any one aware of any firmware or software that can help me solve this issue.

    It is the orginal Snow Leopard install disk that came with the machine.
    Techtool indicates that the dvd drive is working correctly.
    Techtool shows Disks 3 and 4 are working correctly.
    Disk utility and disk warrior show 3 & 4 are working correctly.
    Disk utility and disk warrior say that the raid setup needs to be rebuilt.
    In order to rebuild the raid and lots of other reasons using the install disk is necessary.

  • PDF Documents on Nokia E90

    Hello Friends,
    I've got a Nokia E90 with Blackberry setup on it, everything seems to be working fine but when somebody sends me a PDF doc its appears as a blank page. However, the same document if transferred via computer or Bluetooth opens fine.
    Clueless about what to do!

    Hi Zack,
    AFAIK SAP has stopped the printable documentation from 4.6C on. I would suggest that you install the HTML-Help for Windows from the Documentation DVD. Here you can Print whole chapters. If you use <a href="http://freepdfxp.de/freepdf.htm">FreePDF</a> as your Printer you get the PDF's.
    Regards
    Gregor

  • Stuck: Need Disk repair but DVD drive dead and only have USB 1

    [1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
    I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
    (The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
    Disk Utility reports three things:
    1. Incorrect number of thread records
    2. Volume Bit Map needs minor repair
    3. Checking volume information.
              Volume free block count",0)   [I might have mangled this line]
    (It should be 13438611 instead of 13437937)
    Here is the GOOD (but these are useless as explained under the "Bad"):
    - I have a Tiger 10.4 boot DVD for a repair ==>but see below
    - I also have a Disk Warrior disk (never used)
    Here is the BAD:
    - My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
    - I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
    Questions:
    1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
    2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
    I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
    Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
    Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
    Thanks,
    Bill

    Jeff and Michael,
    Thank you both for your generous and thoughtful input.
    Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
    I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
    CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
    ==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
    fsck -fy   in Single User Mode
    I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
    Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
    Thanks,
    Bilil

  • How do I install bootcamp on the new drive that I installed with the dvd drive adapter

    Hello, I have a macbook pro mid 2012 13 inch, I have just earned some money, enough to buy a SSD, and I happily went to the store and bought a samsung evo 840 120gb SSD. My plan was to clean install windows 8.1 on the SSD, I already had bootcamp on the 500GB HDD with windows 8 that came with the mac, so I backed up the important files from the windows partition. I deleted the partition, and restored it to the mac's partition (which I was going to partition again after the windows installation is complete for the storage for my windows partition) I made a installation usb with the iso I have made with bootcamp assistant, and waited. After that was done I restarted my computer holding the option key, then I booted into the EFI boot partition, and went through the process, entered the serial key, and agreed the thing, and then  when I did the format it said it couldn't do it, so I took it out put it in an external hard-drive case, then I plugged it into my windows 8 laptop, then I opened command prompt, then I typed "diskpart", then after the administrator thing popped up, I clicked yes, then in the diskpart prompt, I typed in "list disk", and my SSD was disk 1, so I did "select disk 1" then I typed "clean" Then I went into the drive manager, then a thing popped up saying which one would I choose between MBR or GPT so I selected GPT, then made a new NTFS partition on the SSD, then took it out, then I popped it back in then went through the installation, until the actual installing part where after copying files is done, this pops up "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D" So I downloaded a torrent because I had thought that this was corrupted, and downloaded a torrent from a website, and downloaded the iso, and I tried and the same error, again and again of taking out the drive from my computer to format it and putting it back in again (since there was some files made on the SSD) so I had decided that I would download a windows 8 torrent, then I did then it couldn't even start, so I want to install windows 8.1 on my macbook pro, on a separate drive in the the DVD cage (not external, internal), would there be any way to do it, please help!
    Specs:
    Macbook Pro Mid-2012
    OSX 10.8.5
    i5-3210m
    Samsung 2x4GB 8GB RAM (Dual Channel)
    Hitachi 500GB (comes with it) in the normal hard drive cage
    Samsung EVO 120GB SSD in the DVD cage

    1. The disk layout in OSX Disk Utility.
    2. Choosing the Free Space partition.
    3. Executing the installer
    4. After the installation, from W8.1 Disk Management.
    5. On a soon-to-be-released OS, diskutil list before and after W8.1 EFI installation.
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         128.7 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                     Logical Volume on disk0s2
                                     AFB7276E-51EF-478F-98A1-47D941BD9843
                                     Unencrypted
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         128.7 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:         Microsoft Reserved                         134.2 MB   disk0s4
       5:       Microsoft Basic Data                         126.4 GB   disk0s5
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS OSY-MBP13              *128.3 GB   disk1
                                     Logical Volume on disk0s2
                                     AFB7276E-51EF-478F-98A1-47D941BD9843
                                     Unencrypted

  • How to connect my Macbook Pro to play dvds on my TV

    What cables and which output ports are best to play DVDs on my Macbook pro and displaying the movies on my TV? I was thinking the video output would be either "mini display" or "firewire" and the audio would be the headphone audio out port, but I'm guessing and I would rather not buy a lot of cables I don't need.

    Actually, mini displayport is digital only so you can only output to digital standards like DVI or HDMI. If you have an old CRT w/ RCA inputs (the red, yellow, white inputs) then you won't be able to connect your MBP (at least not w/o an expensive convertor). There is a DVI to video adaptor but that is b/c DVI can transmit both digital and analog; your MBP, however, is not capable of sending an analog signal through there.
    Long story short, if you have a new TV w/ digital inputs, then there are a lot of options, but realistically none if you don't have digital inputs.
    You can buy this combination for HDMI:
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
    http://store.apple.com/us/product/TR842LL/A?mco=NDY5NzgwMw
    You can also buy a mini displayport to hdmi adapter and hdmi to hdmi cable from amazon (or other electronics stores).
    If your TV accepts DVI, you can get this combination:
    http://store.apple.com/us/product/MB570Z/A?mco=NDY5OTA2OQ
    & a DVI to DVI cable not sold at the Apple store.

  • RECORDING DVD FROM VCR

    HOW DO I RECORD A DVD FROM A VCR? I BOUGHT A APPLE MINI-DVI TO VIDEO ADAPTER AND A S CABLE ADAPTER, IT ALL HOOKS UP, BUT IT DOESN'T SHOW UP AS BEING THERE. HELP! ANYBODY! I WOULD LIKE TO DUB MY CHILDS MOVIES OF WHEN SHE WAS YOUNG BEFORE THEY ROT AWAY ON VCR TAPE. ANY SUGGESTIONS?
    imac G5 20"   Mac OS X (10.4.5)   just received

    FYI.
    I recently purchased the EyeTV 200 (Firewire).
    A refurb direct from Elgato for $200.
    (http://www.elgato.com/indexfr.php?file=shoponlinesh
    opeyetv200refurb)
    Yeah, I got the "200" because I'm transferring 300 training sessions from VHS to DVD. I use the RCA inputs (three wire plug type - white & red (sound) and yellow (video)). EyeTV200 does a fine job.
    I also use our Canon GL2 to pass the video through the camera via firewire into my Intel iMac. I find EyeTV 200 easier (and I can watch and record TV!) while at work! (WaaHOO!)
    This is for the analog signal. TEh EyeTV 500 is for
    digital cable.
    Didn't know that. Saw the "500" but thought it was for HDTV only. Thanks for the info.
    Comes with EyeTV software which allows you to view a
    TV guide (titantv.com) and click what you want to
    record.
    True! You can even schedule it to record like a VCR. I set it up to record "Amazing Race" before leaving work because the program comes on late and I wanted to see it. Got to work and there it was!
    Has S-Video as well as Composite video and stereo
    audio inputs.
    So true. I also have a VCR with S-Video and it works just dandy with EyeTV 200.
    I'm in the process of putting my videos onto DVD with
    it.
    Let's you save directly as MPEG 1, 2, or 4.
    Also exports to DV, iPod, H.264, DIVX, HD720, HD1080.
    etc.
    Between this and iDVD and iMovie HD, it's some pretty
    wicked stuff.
    Ain't it so! Two happy EyeTV users playing on their Macs!

  • HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

    I have a new apple dvd drive, I was told it will work with my imac,  but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

    If it is this drive, note that it is for MBA's and Mini's only:
    http://store.apple.com/us/product/MC684ZM/A
    Ciao.

  • I am trying to build a DVD from an Everio Camcorder in 16:9. but output is 4:3

    Hi,
    I can't seem to be able to fix this problem. The settings I use in Premiere Elements 9 are as follows when I Open the project: NTSC, Hard Disk Flash Memory Camcorders, Widescreeen 48KHZ. When I bring my scenes in the timeline, I get a warning:"Mismartched Project Setting Preset" . I does not matter if I click Yes or no, they come out 4:3. Also when I create a DVD, I use the setting NTSC Wide Screen Dolby DVD.
    I can figure out what to do to fix that. Also, just spent an hour on the phone with a tech about blurry output and the resolution was to change my files .MOD to .M2V. It could be a pretty long process. With those issues, it is getting to be pretty frustrating.
    Thanks for your help,
    Luc

    Lut,
    Welcome to the forum.
    What are the full specs. of your MOD, and M2v files?If you do not know exactly, you can use G-Spot, or MediaInfo, to gather that info.
    That info might help pinpoint the issue.
    Good luck,
    Hunt

  • Script to open and close CD and DVD

    Hi everyone,
    My MAC has an internal CD burner and an external DVD burner. I would like to know if it could possible to create two scripts that, by clicking , it would open or close (depending of the status) my CD and another one for my DVD burner.
    I look at the list of functions, and I could find only eject. I new to Automator.
    Thanks a lot

    Bruno,
    I believe you will find what you want at the following discussion forum item:
    http://discussions.apple.com/thread.jspa?messageID=1337938

  • How do i back up my itunes library to multiple dvd's

    I have 7.32GB of music file and from the instructions provided for copying my music folder to a dvd, it tells me the dvd is not large enough...duh.....but it doesn't give me the option to use multiple dvd's.  I tried zipping the file but that still doesn't work.
    i have loaded all my music on one computer.  I want to make a copy of it to place on my work computer.

    Doublechecking, tex ... are you using the following instructions to create backup DVDs for migration to the work PC? (The plan being that you then take those to the work PC and then "Restore" the backup to the different PC?)
    How to back up your media in iTunes
    ... or are you using a different sort of technique?

  • Can't install Snow Leopard on MacBook Pro - DVD won't mount

    I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount.  This is an early 2008 vintage MacBook Pro, intel core duo...
    I'm using a OS X Snow Leopard install DVD (family licensed).  This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP.  Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted.  Upon running the installed (a year ago), the computer restarted but hung in boot.  After getting the disk ejected and the computer restarted, the disk would never mount again.  I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
    The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
    BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs.  Only the Snow Leopard install DVDs fail to mount.
    I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing.  I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
    I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
    Zapping the PRAM did not help.
    Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

    Solution that worked: Copy the Install DVD to a USB flash drive and boot from that. 
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Up and running with Snow Leopard now and working on the updates.

  • I have three videos to edit.How do I save each one so I can burn them together to a DVD?

    I have three videos to edit. How do I save each one so I can burn them together to a DVD?

    Use Share/Computer/AVI to output each video as a DV-AVI.
    Then open a new project set up for DV and combine the three AVIs on that timeline. Voila!

  • What's the simplest way to edit the audio on a DVD using a Mac?

    I appreciate you taking the time to read/respond to this post.
    Here's the deal:
    My church records its service on DVDs to pass out to members.  This past weekend an annoying, high-pitch hum found it's way on to our DVD.  We also record audio versions of our service to pass out on CDs, and (scratching my head) this week's CD turned out just fine, no hum.
    Is there an easy way to detach the "bad" audio from the DVD and replace it with the good "audio" from the CD?  I know I could do what I want using iMovie, but every time I do something like this using that program, the picture quality on my new DVD looks worst than the original, plus it takes a ton of time converting and reauthoring.
    Your help and suggestions are most appreciated.

    I've never really used IMovie cause I have Final Cut, but I'm surprised its degrading your video , This makes me wonder what format your movies are in , are they .dv ( digital video ) ?
    You may even take a look at your burn settings in IDVD , I cant think of anything else outside of video editing software that will do what you are trying to do, in short its your only real option..  

Maybe you are looking for