Dvd tray goes in out out without playing dvd

pavilion a636n the button won't open or close the tray and when I put dvd in manually the tray will not stay closed but just ejects without playing the dvd. Any ideas?

Hi John,
Open up the case, remove the front cover and check the eject button on the CD/DVD drive to be sure that it is not sticking.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Ipod 4g goes black out while playing games

i dont know whether you guys have experinced this but my ipod 4g goes black out while playing some games. its like when im playing games half way, the ipood will auto close the app that im playing. Does this means that my ipod is having problem?
Btw My IPOD 4G WAS JAILBREAK BEFORE.BUT I RESTORE BACK NORMALLY

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

:( Has anyone put card reader into cd/dvd drive by mistake ? If so how do i get it out without breaking drive :(

Has anyone put card reader into cd/dvd drive by mistake ? If so how do i get it out without breaking drive

Thankyou !!!!! Its worked ! Was going to cost me a lot just to have it looked at without anything being done ..... I cannot believe how simple this was

So my iTunes Radio is not working and whenever I press or choose a station, it goes into the song it was going to play and goes back out to the stations menu. I have great wifi, great cellular option or whatever it it, So how do I get it to work again?

So my iTunes Radio is not working and whenever I press or choose a station, it goes into the song it was going to play and goes back out to the stations menu. I have great wifi, great cellular option or whatever it it, So how do I get it to work again?

Hi Jbierrie,
There is an issue with Photoshop specifically related to recent updates in which causes the licensing to revert to trial after a certain number of launches (typically 2-3).
The current workarounds are to either:
- Sign in with your Adobe ID again every few launches
- Uninstall Photoshop CS6 and then reinstall it but don't install any of the updates
The issue with the updates is planned to be fixed in the coming weeks. Sorry for the inconvenience.
-Dave

I have no way to return to previous page without going completely out of firefox - can you help with this?

I start with the home page of a site. Then go to one of the other pages on the same site. I find no way to return to the home page without going completely out of firefox and having to start all over again. In other words the "back" arrow is gray and does not work to get me back to the original home page. Can you help with this?

Try double clicking on the Back arrow. If you click on it and hold it pressed, it should give you a drop down list of the previous pages. You can also achieve that by right click on the Back arrow. But if you do a single, quick click on it, it should take you back.

My iPhone 5 is going throw all songs very fast without playing. Whats happening?

My iPhone 5 is going throw all songs very fast without playing them. Whats happening?

Hi - in my opinion, it sounds like you might have more than a normal heat and battery drain issue - the iPhone will heat up and use up the battery under intense usage but it shouldn't crash unless you let the battery drain completely - the most disturbing part is the slowness when on LTE - my phone is actually faster on LTE than wi-fi - however you cannot compare the iPhone 4 to the iPhone 5 - and if you are not satisfied with the local Genius bar, I would contact Apple directly and see what they say - http://www.apple.com/support/contact/ - also check out my previous post - https://discussions.apple.com/thread/4525586?tstart=0 - having said all this however what your are experiencing could be normal in your situation - I hope this helps.
Regards,
Charlie

How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?

I have a seagte back up plus. I pulled my hard drive out without ejecting it and now finder dosn't find it but I see it in disk utility (although I cant repair permissions) How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?
Thank you so much for any help

In Disk Utility you need to see a volume or partition in addition to the drive.
If all you see is the drive, then when you ejected it you proably corrupted the volume or partition on the drive.
If that is true then your chances of getting anything back are slim at best.
About the only thing I know that might work not is to send the disk out to a service for recovery. This is going to cost like $$$$.
Is the data worth that much?
Allan

The sound on my iPhone 4S cuts out when playing music/podcasts.

The sound on my iPhone 4S cuts out when playing music/podcasts. If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again. Sometimes it will play for 15-20minutes before cutting out. The track is not "paused", and appears to continue, just no sound. I tried cleaning the headphone jack with compressed air to no avail. I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio. That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing. If I reset the bluetooth, the sound comes back on.
This started happening about a week ago, but no "event" that I can think of caused it. I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat. I've tried doing a reset of the phone. I also was running iOS5 when I first noticed this, and since upgraded to iOS6. The problem appeared with both.
Any help would be greatly appreciated.
Thanks,
Steve

One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone. I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner. An Apple employee told me that the pins on the phone had a little corrosion and sand. The problem hasn't gone away completely, but has been significantly reduced. I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

Is there a way to zoom images in and out without changing the frame?

It is easy to move an image around within a frame without touching the frame, but I have not found a way to zoom in and out without touching the frame. I'm working with a lot of images (Indesign CS6 for PC) and I need to do this a lot. Thanks.

I don't know what is the correct terminology, but none of those things does what I want. With the Content Grabber I can move the image and see where it is going and place it where I want it, and the frame does not move and is not changed in any way. I want something that does exactly the same thing with "zooming" in and out on the image.
Shift-drag on the corners moves the frame. In the Transform panel, in the lower box, it makes the image AND the frame larger or smaller. Neither of these is what I want.
If I'm not using the right terminology, let me try to explain. If I have an image that is larger than the frame, then I can only see a small part of the image inside the frame. If I could zoom out on the image, I would then see a larger part of the image in the frame, but the frame would be exactly the same size and in exactly the same place (just like it would be when you use the Content Grabber). If I could zoom in on the image, then I would see less of the image but in more detail.
If I could move (like the Content Grabber) AND zoom without doing anything with the frame, then I could get the image just the way I want it inside an already-properly-placed frame in the most straightforward and simple manner, and be able to see what I was doing in the process. Dragging on the corners is basically trial and error because you have to go through several steps before you see the final result.

Can I set an HP LJ4000T to stop printing if Tray 2 runs out of paper while leaving AUTO CONTINUE ON?

I'm dealing with an issue here where I'd like my HP LJ4000T to stop printing completely if Tray 2 runs out of paper. Currently it automatically prints to Tray 3 which has a different paper type.
On the other hand, I'd like to keep AUTO CONTINUE set to ON. Can this be done or is this just a direct contradiction?

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

1 hour clip in time-line goes gradually out of sync

Hello,
I captured a one hour mini-DV tape to a G4 Powerbook as one clip in FCP 4.5. As it plays in the timeline, it gradually goes out of sync and eventually goes way out of sync. Why would this happen? The tape itself plays fine in the camera and as it was captured it appeared to be in in sync all the way through. Thanks.
Jonathan

Mini dv does not lock the audio to the picture, so over a period of time you'll get sync drift. Check to see that your sequence settings for audio match the camera's. FCP defaults at 48k. if you shot at 32k (12 bit), than on a long capture your audio will drift out of sync. You can create a sequence that is 32k, that might help but it looks like you'll have to move the audio track possibly in sections to get it back into sync.

Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using password on ios 8?

Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using her password on ios 8?

You can't. Your mysterious benefactor must remove the device from her (I guess you know it's a her?) iCloud account by logging into icloud.com, going to Find my iPhone and removing from there.
Matt

My Mighty Mouse wont come out and play!

This is really not a new topic but an old problem for which I have yet to find an answer. I have a new iMac 27” i7 on which I have installed Windows XP Home Edition. I can’t get the Mighty Mouse to work.
I have tired a number of solutions. I have gone through the Windows trouble shooting process and not found anything wrong except that the mouse still doesn’t work. I have reinstalled the Bootcamp drivers from the Snow Leopard OS DVD but that did nothing.
All this has entailed a lot of exploration and exposition for me in the Windows wilderness and I have been able to identify the point at which my mouse refuses to come out of its hole.
In Windows when I go into the Control Panel/Printers and other Hardware/Bluetooth devices a window opens with two pale icons, one is the keyboard and the other the mouse. The Keyboard icon is identified as “passkey enabled” and “connected”. The mouse is identified as “enabled” but there is no connected entry. When I highlight the mouse icon, click on Properties and click on the Services tab a touch appears and looks for and finds a check box labelled “Drivers for keyboard, mice, etc (HID)”.
When I check this box and click either “OK” or “Apply” a window opens titled “Bluetooth Service Error” telling me that “Access is denied”.
Denied! Denied! Windows XP is behaving like my best friends mother telling me her son has a cold and I can't come over to play and he can't come out.
So how do I get this best friend (my Mighty Mouse) to come out and play in Windows XP?

Thanks Barry
I remember trying this download earlier in the year and getting nowhere. Still I gave it another shot.
I downloaded the update "AppleBcUpdate.exe" from the link
http://support.apple.com/kb/HT3934
and tried to install it in Windows.
As the link you directed to me explained it is possible to get the following message "This update is not intended for this computer and will not be installed".
Well that put an end to that little idea.
It wouldn't install and the link didn't explain how to get around this message. The link also suggested that you should see if the drivers were correctly installed. I figured if the update wouldn't install it was because the drivers were already there. So I followed the instructions - Start menu/All Programs/Accessories/Systems Tools/Systems Information/Software Environment/(+) and looked for the drivers.
The link said that the Apple Built-in Bluetooth should be version 3.0.0.9. It was. It also said that the Apple Wireless Mouse driver should be version 3.0.0.5. Well there was no such driver.
This download was dated Oct 28th. My machine was bought in late Dec and has Snow Leopard OS X 10.6.2 so perhaps this version of Snow Leopard has Bootcamp drivers that supersedes this update.
Who know?
Anyway the problem remain.
I have a young friend who has just bought the small version iMac and I helped him install Windows XP using Bootcamp. He also can't use his mouse.
I should also correct myself at this point. I called my mouse "Mighty Mouse" when it should of course be "Magic Mouse". Well what do you expect I'm old. In my day there was only one mouse and his name was Mickey.
John

I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

Dvd tray goes in out out without playing dvd

Similar Messages

Maybe you are looking for