DVD/TS will not burn - error with rendering menu video asset?

This 5-minute slideshow takes 45 minutes to prepare, then "could not burn", yet on my MacBook, a 10-minute slideshow took 3 minutes with flawless rendering/processing (granted I only had the 2 songs and 60 pics or so on my computer, not like my dumping ground iMac). I've spent 3 nights troubleshooting this. I have reinstalled Snow Leopard and repaired disk permissions. There are no yellow triangle/yield/error signs in the project.

Your comment about "dumping ground" suggests the hard disk may be too full. Even with a small project, you need a fair amount of space on the boot drive (your main hard disk) for iDVD to do all the processing. If you're under 10 gigs of available space, it may cause some trouble -- some around here recommend 15-20 gigs of free space when you're burning a DVD.
John

Similar Messages

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Rendering menu video asset: not starting at top level

When I start to burn a DVD on iDVD6.03, the rendering does not start at the top menu - it picks any sub-menu.
I removed iDVD incl. all files and reinstalled it - no change. Any advice ?
Thankx
M
G5 DP1.8 2HD 250GB Mac OS X (10.4.9)

I had the same problem. I've more or less convinced myself that if you use a video for the autostart that is also in one of your sub-menus, then the burned DVD will mistakenly "return" to that sub-menu after it plays the auto-start.
This is a bug.
This is not 100% reproducible, so I'm not sure what magic makes it not happen. It almost always happens.
Workaround is to make a copy of the video outside iDVD and include it twice, so that they look distinct to iDVD. Fine for shorts I suppose.
iDVD 6.0.3 with the Lines theme.
Preview exhibits the correct behavior, so it must be some problem with laying out the menu navigation during mastering.
Chris

DVD's will not burn at their full speed

I've had my powerbook for about a year now and haven't had any problems with it until now. I recently just purchased Phillips DVD-R 4.7GB 120min 1-16x speed blank DVD's. My powerbook will only write them (using built in utils, and 5 other 3rd party burning software) at 2x speed.
I know that my powerbook is capable of much more than that. What can I do to acheive the full write potential?
Thanks
Powerbook G4 12'' Mac OS X (10.4.8)

Thanks for the information, I will check it out. My system profiler says that I have a
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
and under burning it says:
Firmware Revision: DMP2
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Thanks again.
Chris
Powerbook G4 12'' Mac OS X (10.4.8)

Qosmio G30: CD/DVD drive will not burn CDs or DVDs

hello everyone..
I am using a G30 notebook and from the moment i bought it i couldnt burn CDs nor DVDs using the built in rewriter!
Every time i insert a blanc CD/DVD into the drive, it cant be read and an error message appears (E:/ is not accessible, incorrect function) when i try to click on the CD/DVD ROM.
If anyone has any idea on what to do, please share it.
Thank you

Hi Mohamed
The same suggestion you can find here in this posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17212&messageID=62862
PS: If you use or have installed two burning applications on the OS so remove one and use only one burning program; for example Nero.

DVD drive will not burn CDs?

I am having trouble copying CDs. I've tried to copy an audio CD using both Windows Media Player 10 and Toshiba's Sonic Record Now, but both produce an error towards the end of the burn process.
I've reinstalled the DVD Driver and reinstalled Windows Media Player, but these actions haven't remedy the problem.
Has anyone got any other suggestions that might help?
Thanks in advance, Monkey

Hi
Try to remove preinstalled Sonic software and use Nero. I have used Nero on many different notebook models without any problem.

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpful

Try using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT

My DVD will play DVD's but will not burn from FCP

my DVD will play DVD's but will not burn from FCP also the Finder does not recognize when I load a black DVD

You need DVD burning/Authoring software.
EIther iDVD or Roxio Toast or try freeware burning software Burn for OS X.
iDVD is no longer available, but the last complete version that still works comes with Apple's iLife '09 apps.
You would need to search for this on online sites like Amazon to see if you can still purchase.
You install the iDVD app and all the authoring themes by doing a custom install of the disc and ONLY installing the iDVD app and iDVD themes.
Here are a few copies of this for sale on Amazon U.S. site.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=iLi fe+%2709
Roxio Toast is another option.
http://www.roxio.com/
And freeware burn software Burn for OS X.
http://burn-osx.sourceforge.net/Pages/English/home.html

Installed New DVD burner, but it will not burn DVDs

I just installed a new Pioneer DVR-112D DVD burner but when I try to burn a DVD with iDVD 4 it will not burn a DVD. It looks like iDVD 4 will get to stage 4 of the process but it will not finish burning the DVD. Can anyone help me out?
Thank you
Nelson Rego

If you don't have Tiger, or iDVD 6 or higher, you will need PatchBurn
<http://www.patchburn.de>

Finder/Disc Utility/Toast Will Not Burn DVD+R, DVD-R

I have an iMac that will no longer burn DVDs. I've tried various brands of DVD+R, DVD-R and DVD+R DL all of them do not burn in the finder, disc utility, or Toast. CDs burn fine. DVD+R DL discs burned previously with this machine will no longer mount. I just wiped the hard drive and reinstalled OS X and ran all updates and still have the problem.
Media brands tried: OfficeMax, TDK, Maxell, JVC, Sony.
Thanks in advance!

Hello StraightUp and others
Check thru this Disc Burning Quick Assist link, there are some good troubleshooting tips in it.
http://docs.info.apple.com/article.html?artnum=303599
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.8) Maxtor 300GB FireWire 2G Nano

ITunes 12.0.1.26 on 2009 Mac Pro will not burn disc - error message medium write error

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Just upgraded to iTunes 12.0.1.26 on 2009 13" Mac Pro with Lion. Will not burn music disc and getting error message "The burn failed because of a Medium Write Error". Is this version of iTunes compatible with Lion and if not how can I revert to previous version.

Idvd 08 shuts down after building, idvd will not burn a dvd

Dvd studio pro burns fine, Burning a DVD data disk works fine. Burning a project in Idvd 08 will not burn anything. It simply quits before finishing and spits out an empty dvd disk. I have a imac g5 power pc 2.1 ghz, 500gb hd, 2.5 gb ram and I am running idvd 08 version 7.0. I have tried reinstalling idvd and have even repaired permissions. What do I do? What could it be?

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• *Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb*
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
Yours Bengt W

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Encore CS6 will not Burn DVD and restart computer

Encore CS6 will not Burn DVD and freeze then restart computer. But if I burn to a Image file then use a program like Image Burn no problem burning a DVD. Whats up? The burner is Blu-ray \ DVD burner from Pioneer. All other Adobe suite apps run with no issues. Computer is windows i7 with 24gig of memory Nvidia Geforce GTX 760 Raid 5 system.

Things and Software to AVOID when authoring/burning a disc.
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html

DVD/TS will not burn - error with rendering menu video asset?

Similar Messages

Maybe you are looking for