DVD UJ892 driver

I cannot play DVDs on my new T410 thinkpad. In the device manager I get the following message: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
How do I fix this?
Thanks

Hello mate,
Go in the Device Manager, then right click on your dvd player and choose uninstall.
After that click on the button Action on top and choose Scan for hardware changes. It should find your dvd and reinstall it properly. Otherwise reboot and it will detect your dvd.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

T410 DVD UJ892 Issue, 'prepared for safe removal'

When I first received my T410 a couple of weeks ago, several programs which access the Mat**bleep**a DVD-RAM UJ892 drive did not recognize it. I updated the BIOS and the programs seemed to work, that is temporarily.
The machine works better, but still the DVD drive frequently becomes unrecognized completely, or the icon in Device Manager is marked with a yellow '!' (Windows cannot use this hardware device because it has been prepared for “safe removal”, but has not been removed from the computer (Code 47). To fix this problem, unplug this device from your computer and then plug it in again.) Rebooting the machine causes the device to be recognized again and removes the ‘safe removal’ status.
When the device is in ‘safe removal’ status, any attempt to manipulate it with Device Manager will cause Device Manager to hang. Removing and plugging the drive back in will not return the drive status to normal. The machine must be rebooted. Seemingly this also causes the machine to hang when it shut down making it necessary to force it to shut down.
If one manually marks the DVD drive for safe removal and then removes it, it remains in the list of devices that can be removed, but is grayed out. The drive still appears in Device Manager as prepared for safe removal. When the drive is plugged back in, it is not recognized. A scan for new hardware will not find it. Only when the machine is rebooted can the drive be used again.
Any help in finding a solution would be appreciated.
Solved!
Go to Solution.

Now its working. I download and install the battery firmware then on the battery power manager I select: power source optimized. Now the DVD RW is always on and ready to go.

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

PowerMac G5 doesn't work anymore simply due to a DVD-ROM drive removal!

Hello, here's what's happened (I'll write using the "present" because I'm not English).
This happened about two days ago:
I need to read an Ultra ATA hard disk, so I power off the Mac.
I remove the SuperDrive DVD-ROM and I connect the hard disk in its place (I already made this with other ATA hard disks in past and it always was OK).
I close the Mac.
I try to start: nothing! The light on the power-on button of the Screen (Apple Cinema Display 20" plastic) and the light on the power-on button of the Mac case starts flashing 3 times (then stop, than other three times, etc...).
So I power off. I change the jumper configuration of the hard disk, like the Super Drive. I try again: NOTHING. Always three-times flashing the lights.
So I power off. I re-install the DVD drive, close the Mac again and restart it.
SURPRISE: the same symptom! The computer doesn't start and always makes the three-times flashing lights...
So I tried totally removing the DVD drive, and restarting it without it: nothing: same symptom.
Unfortunately I made these attempts forgetting to disconnect the power cable of the Mac!
Then I start trying with other RAM configurations, hoping that just a RAM module got burned. I have 6 ram modules (512 MB each).
I try lots of combinations... nothing, always same symptom.
Finally, I disconnect the power cord again, I re-install all the RAM modules, an I try to reset the CMOS: I remove the Motherboard battery for some seconds.
Than I re-install the battery, close the Mac, connect the power cord, restart it: it works!!!
I go in System Info, and I see that it doesn't recognize two of the 6 RAM modules: just 4. The slots of the other 2 not recognized DIMM modules seems empty, but there is the ram!
So I power off the Mac Again. I disconnect the power cord.
I change the RAM modules positions. I try again: nothing! Again the three-times flashing lights symptom, and always black screen again.
So I try again by removing the CMOS battery... nothing... always flashing...
After lots of attempts (also changing again the RAM positions, trying to remember how it was when it worked...)... nothing.
I power off the Mac.
After about an hour, I simply try to power on it... IT WORKED!!!
I used it too... went on Internet, etc... Finished working, I powered it off and went to bed.
The day after, I tried to power it on... nothing! Always three times flashing lights...
From that moment, it was totally impossible to let it work...
I tried to change the RAM positions again... I tried also pressing every time the reset button on the Mother Board... nothing...
The only different symptom that I obtained, a couple of times, was that the two lights (on the Screen button and on the Mac tower button) didn't flash, but was always on.... but it didn't run anyway: totally black screen.
How is this possible? Durin 18 years of computer hardware experience, NEVER happened that a computer got broken just removing and re-installing a DVD-ROM drive!
And I'd never imagined that removing a DVD-ROM could be a dangerous operation... It seems to me just like a car that got broken if I replace the cigarette lighter...
What do you think? how is this possible?
If the CPU or the Motherboard or the RAM too got broken... simply it NEVER should run... on the contrary two times it worked very well!... with a broken Motherboard or CPU??? ...mmmm... so strange....
If the RAM got broken... how is this possible? 6 ram modules burned together??? It seems so absurd... (in past there were 8 RAM modules... one or two got broken... so I removed them and it worked again... but not 6 !!!!).
Any opinion?
Any practical advice?
Prevision of costs?
Thank you!!!
Message was edited by: ununpentium

Hi Wolfman I have an update of the situation.
We tried moving the RAM modules again... and at one point it worked! With just 2 RAM modules.
But at the green screen (with the gray apple darker) it blocked.
So we removed the two RAM modules and installed other two modules: it worked again! These two last modules are 512 MB each.
So we restarted the system pressing "c" with the OSX DVD in the drive, and it worked! I used System diagnostic OSX utility and it found the 2 ram modules, but of 256 MB each instead of 512 !!! How is this possible? (if they were broken OK, but detect just half of its size seems so strange...).
Than we restarted it again connecting an OSX bootable external Fire Wire LaCie hard disk (FW400 port), and it worked!
We used DISK UTILITY to test the internal boot hard disk and it gave me an error (verify disk).
The Disk utility was unable to repair the disk.
Another damage!
I remember that in the past attempts it booted once (not three times flashing) and stopped at the grey screen... (I think: maybe due to the boot hard disk error!).
Unfortunately this external bootable firewire disk has got some problem and it sometimes blocks itself emitting a "clic".
So I powered the mac off and connected another newer firewire lacie bootable hard disk. I connected it in the FW800 port. I rebooted and... surprise: three times flashing light again!!!
No way to let it pass this wall, no initial "sound" again... nothing!
So I removed the FW800 drive, and changed the RAM again (inverted them, always two internal slots n. 1 and 2): it worked!
I booted from the FW400 hard disk, and it worked. I was able to backup some data from the internal hard disk (in order to be able to try to solve the error initializing it), and I tried again to boot with the FW800 hard disk (I want a stable system while initializing a drive!).
As I connected the FW800 hard disk again, I tried to reboot... nothing! Again the three-times flashing light error! No sound... black screen again...
(So, simply removing a DVD ROM I got RAM broken, maybe the Logic board, the hard disk too... maybe the FireWire 800 port too.... mmmm.... this mac is possessed! And it is connected through a professional power stabilizer too!).
So after several attempts with RAM, cmos reset, firmware reset (power it up holding the power on button for some seconds), etc... I got it working again...
So this time I rebooted it pressing "c" and I initialized the internal hard disk using the OSX DVD as boot drive...
Then I rebooted from the FW400 hard disk and I used CarbonCopyCloner to restore an internal hard disk clone OSX complete installation from a .dmg image file in the FW800 lacie hard disk... but this time I connected it not using the FW800 port but through the USB 2.0 port... and it was able to copy the data.
The computer was working... able to boot... no three times flashing error... no FW800 connections... always rebooting OK... the internal hard disk initialized, working, with NO errors (disk utility tested), made bootable...
I tried to reboot again (with no "c" or "alt" pressing, hoping the internal boot hard disk working again): nothing!
THREE TIMES FLASHING LIGHT AGAIN!!! No way to solve the problem now... always flashing...
What is happening here??? I don't understand! I use computers (instable DOS/Windows computers mainly!!!) form about 18 years... never seen a so strange behaviour!!!
We'll try to gather money to replace the RAM, before thinking to a Logic Board replacement...
Your opinion?
Thanks!

How do I fix my dvd/cd drive after updated Itunes?

How do I fix my dvd/cd drive after updating itunes today?

Hi there,
It sounds like you got about half way through the process. You may want to review the process for relocating you iTuens Media found in the article below.
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/ht1364
-Griff W.

I Need a PC Detective for..The Strange Case Of My Malfunctioning DVD RW Drive: IT WILL NOT EJECT!

I can't get this drive to spit out my disc and quit saying error code: There are no factual errors.
Here is the play by play summary list regarding my pc's vital stats, events that occurred just Before the problem happened, what happened During the time and right After the strange malfunctioning of my DVD RW Drive.
BEFORE:
My DVD RW disc drive is malfunctioning on my Acer all-in-one desktop running a new install of win 7 ultimate x86.   I was in the middle of labeling a handful of blank title DVD's by looking at the content on them.
I stuck in the first no label CD to jar my memory. When I did realize, I ejected it, wrote on the top, then went to the next DVD and did the same. When I loaded the 3rd DVD in the DVD tray, I wasn't sure what was on it. I saw 3 files labeled photos, templates,
and back up. upon further inspection I realized the content I was looking at was off my off my old palm pilot. I clicked eject. BUT...
DURING:
...at the exact moment I click eject a I got a double bubble notice that tells me Adobe has a important update and Windows has important updates too. OK, so I approve the updates. Adobe was fast... Windows takes awhile and says I can continue doing what I was
doing while the updates occur.
AFTER:
I go back to my DVD Drive project. I figured the timing was bad that's why my disc didn't eject, and so I right click to eject my DVD again. This time the notice says "Please insert disc in the drive". WHAT?? So I start a series of mouse clicks to
reload the contents i just read from the disc of old palm pilot info, and it was still all gone. The drive reads nothing is inserted aka the drive is empty. OK But I still cant eject my disc either. Frustrated by the obvious fixes not working I eventually
do reboot my PC to start fresh, and now I see my palm pilot info displayed on the disc that's in the DVD RW drive: I click on a folder to see the contents just to make sure I can. AND I COULD. Then I try to eject it and the same BS happened again... Error
code: 0x80070057 / Path: unknown / Source: Catalog - OK OK to spite the fact this error code has no indication that it applies to my DVD RW issue so.. whatever, I try to see if my contents still appears, and it does.   I again try to eject
and it pops up error: "again please insert a disc into the drive" so I check again to see my content and again it's also gone.In my Device Manager everything is fine and says working correctly?
LAST: I make my way to the Microsoft Support run the DVD RW "Fix-iT" tool. Before that I ran a internal diagnostic with the tools in my OS.. I read the help section, I did all the obvious things I could think of. I can't afford not to have
my Drive working, I need to install some programs.   PLEASE CAN YOU HELP ME?

Hi,
According to your description, maybe the disc is damaged or the disc is compatible with the drive. Since you cannot eject the drive,
you can update the drive to see if the issue persists. Maybe the issue is due to the hardware of the
Disk Drive, you can contact your computer’s vendor for assistance.
In addition, since it is related to windows 7, maybe you can ask in the Windows 7IT Pro forum below for further assistance.
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards,
Susie

T60 HDD res. partition, USB ports and DVD-RAM drive no longer recognizing data/media!

I have a base installation of the IBM T60.. I made no modifications to the setup or configuration of how the HDD is structured nor have I downloaded and installed any strange drivers... only automatically downloaded drivers from Microsoft update and manually downloaded driver updates from the Lenovo website.
One day everything was working fine. Next day, my USB devices, reserved partition (can't remember what this is called) and the DVD-RAM drive stopped working but power was still getting to these devices.
My DVD-RAM drive is seen as a DVD-RAM on first bootup. When I insert a CD or DVD media in the drive, the Explorer tree changes DVD-RAM to CD-ROM in the Explorer (really strange). It behaves like there is no media in the drive. Cannot boot with that drive either.
In addition, I have external USB HDD and Flash drives as well. None of them work on this T60 anymore.
When I plug in an external USB HDD or Flash drive, I get "not formatted" error message and a prompt to format my drives?!
I tested these USB external drives on a desktop machine and verified that they are working 100% fine. So the problem has something to do with my IBM/Lenovo T60.
It almost seems like something broke on the motherboard perhaps? I downloaded and installed the latest BIOS updates as well to no avail. Please help. Thanks in advance for your time and consideration of this issue.
Message Edited by bodmaster on 07-18-2008 09:51 PM
Message Edited by bodmaster on 07-18-2008 09:52 PM
Message Edited by bodmaster on 07-18-2008 09:52 PM

Anyone have any ideas? *praying*

DVD optical drive no longer works with Windows under bootcamp or parallels

For some strange reason, the DVD optical drive- Optiarc 5680 on my 27" iMac, no longer works anymore with Windows under Parallels or Bootcamp. It used to work perfectly fine before, but now it just shows up with a yellow exclamation mark under Device Manager and Code 39 "Windows cannot load the device driver..."
The DVD drive continues to still work fine with OSX. But it won't work anymore under Windows via Parallels or bootcamp, despite trying to uninstall the optical device drivers, update, reinstall, etc. Anybody else experiencing this or have any ideas?

Finally found the solution for anybody else who runs into this problem. It was solved by doing a registry mod in Windows from this site:
http://aumha.org/win5/a/xpcd.php#problems
described in “My CD drives have vanished (from Explorer, Device Manager, etc.)”
After applying the registry changes the DVD optical drive worked instantly again with Windows....sigh...guess I can't blame the Mac on this one.

My acer 7535-5020 no longer recognizes my cd/dvd rom drive

My acer 7535-5020 no longer recognizes my cd/dvd rom drive-I am ready to scream! I cannot afford the tech prices as I am disabled but I cannot find anything to cure this sick puppy. Help please!!!

check inside BIOS whether your ODD can be detected, if cant be detected must be connection cable or HW issue
if still able to detect in BIOS, try to run basic troubleshoot regarding ODD
https://support.microsoft.com/en-us/kb/314060/en-us?wa=wsignin1.0

Hello my name is Tyesha Woods,and I have a problem with my dvd hard drive, it will not eject my cd no matter what i do can you please help me?

Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?

Hi Tyesha,
Your DVD won't eject?
Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop.

DVD RAM Drive issue

We have a macbook pro with 2 gig of RAM and osx tiger 10.4.8. We have a DVD RAM drive due to the nature of our work. This drive always seemed to take longer to sin up thn other drives but I just assumed this was o.k Now the drive simply spits all DVD types out, but plays CD's just fine which seems odd to us. We would like to know if it could be someting simple before we send it away to apple. Any suggestions please?

From my experience it sounds like you have a faulty drive. Replacement would be the option.

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

DVD stuck, drive not recognized in system profiler, can't eject, HELP!

I am distraught, my DVD/CD drive is quite sick, if not dead. Alright, I watch DVDs on my computer somewhat regularly, but this one time I was about an hour into a movie when it just stopped playing. I couldn't finish the movie because now my computer doesn't recognize the disc or even the fact that it has a DVD/CD drive at all. The DVD doesn't appear on the desktop and the eject button doesn't do anything, it's been stuck my drive for maybe a month or so and I forgot about it for a while actually.
The scariest thing is that when I check my system profiler I can't find any info about my DVD drive. When I click on disc burning, it says I dont have a disc burning device installed.
I've tried resetting the power manager (PMU) but to no avail. I would really like to solve this without taking my computer somewhere.
Any suggestions?

Welcome to Apple Discussions
Simple step first. If the "stuck" is due to a software problem, restart the computer holding down the click pad through the start-up until the disk ejects. This usually ejects anything in the drive.
You'll find other suggestions here (Donald Worrell post).
If none of the above suggestion work, you'll need to get a technician (Apple certified, if still under warranty) to look at the machine. If the DVD ejects, but the profiler still does not recognize the drive, then a trip to the Technician is your only recourse.

Dv6915nr DVD optical Drive is MISSING

Help my
Dv6915nr DVD optical Drive is MISSING for 3 weeks now. I have done seaching the problem all over the internet.
still couldn't find the solution for it.
Microsoft fix it doesn't fix the problem.
Device Manager won't show any Dvd/Cd drivers
There are 2 ATA devices listed
Ata channel 0 - target:0 - device type:ATA Disk - Current mode: Ultra DMA mode 5
Ata channel 1 - target - device type: - Current mode:
Last time the Dvd drive works and the ata channel 1 target is 1 device type is dvd/cd driver.
i can press the eject button, i can put in the cd and the dvd driver will spin, the light will go on for 3 secs then it stopped.
My computer won't show any Dvd Driver.
Someone help.

lots of people having this problem.
I wonder why....
maybe AVG or some thing is blocking the access of the Dvd-driver?
But get this, when ever i reinstall OS , win vista,
the dvd-rom will show up and starting working....after while or downloading
some windows updates, it stop working again....
hmmmm.......
hmmmmmmmmmm....
who can configure this out.
it could be the microsoft's problem. or anti-virus problem.. i dont know.
but every one here got this problem really need some help from the experts.

DVD UJ892 driver

Similar Messages

Maybe you are looking for