DVD will not pause after burning

The DVD I create with iDVD will not pause after burning. I've tried various DVD players with the same result. Everything else about the disc seems fine. I'm using a DVD-R disc, with iDVD 5.0.1
I have burned DVDs in the past without this problem! I seriously need advice, thanks!!

Hello artisshiny,
if you feel that you have performance issues on your Mac in general (and iDVD in particular), try to do the following:
1. find the file com.apple.iDVD.plist and trash it, then empty the trash.
2. free up some space on your hard drive (20 GB should be free when working with iDVD)
3. repair permissions with Disk Utility (Applications > Utilities) and reboot.
4. run software like DiskWarrior or Macjanitor
hope this helps
mish

Similar Messages

Dual layer DVD will not play after iDVD burning

Hi All,
I am having some trouble making a useable DVD. I have a video that I recorded and imported into iMovie (2h33m long). I exported it to iDVD, which told me that I needed to use a dual layer DVD to make it fit. Here's where I noticed the first problem: iDVD has one option for a dual layer disc, stating that it has 7.7GB storage space, and my discs have 8.5GB. I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD. After burning two discs, I still do not have one that works. It comes up as "supported disc not available" on my Mac, and as a blank disc on any other machine I put it in. It will run on my coworker's brand new iMac, but that is the only one. Am I doing something wrong? The only mistake that I have corrected since I have tried all this is changing the aspect ratio back from 4:3 to 16:9 in iMovie (I am not sure how that happened, as the video was originally recorded in 16:9). I am re-exporting the file to my desktop now in the proper ratio, and changed the quality to HD. I am waiting for the file to encode as we speak. Any help would be greatly appreciated, as this work is for my local school board and is very time sensitive.
I am running a 28" iMac, 2.66GHz Intel i5, 8GB RAM, 1TB hard drive on OSX 10.6.8.

I set it to use the standard setting for the DL disc any ways, turned the quality down a bit to make it fit, and burned the DVD.
That part I don't understand.
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

Main Menu Button will not Highlight after burn!

I'm creating a DVD that has multiple motion menus w/each menu consisting of around three to 10 buttons. These motion menus were created in AE & I made overlays from the AE files in Photoshop. I'm using the simple highlight state for all of my buttons & everything has been playing back smoothly in the simulator...
However, when i burn a dvd the first button on my first play menu doesn't load & reamains unhighlightable even though I can still select it. All of my other buttons in this menu highlight on/off as they should. And this isn't just happening in my main menu, but in about 1/3 of the menus I've created for this project.
I've looked through the discussion pages, talked to Apple, and tried to create some simple scripts to work around the problem, but to no avail. If anyone can help me out w/this seemingly simple, yet incredibly frustrating problem I'd be most appreciative!
G5 2.7GHZ 4GB RAM Mac OS X (10.3.9) DVD SP 4

Are you using AC3 audio?
What player are you looking at the dvd on?
I have an el cheapo Cyberhome that gets all kinds of funky on some menus--does similar things to what you are saying.

Blank 16x DVDs will not burn in internal DVD burner

Hi
Some blank 16x DVDs will not burn in the internal DVD burner on my iBook G4.
My iBook tries to load the DVD-Rs but it spits the DVD out after 2 tries.
Any reason why
iBook G4 Mac OS X (10.4.8)

It could be just the brand you are using.

Macbook pro will not let me burn or load cd or dvd ejects them

my macbook pro will not let me burn or load cds or dvds. It ***** them in, and then ejects them. Have tried blank, music, video.
Wassup?

Hey there Kathi,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that can help you resolve the issue burning CDs and DVDs on your MacBook Pro.
Mac OS X 10.6: Solving problems with burning discs
So long,
-Jason

IDVD will not launch to burn DVD

In my iMovie HD 5.0.2, the iDVD will not launch to burn a DVD. I have tried everything. When clicking the iDVD, it says to go to Finder to launch. In Finder, I go to applications and click iDVD and get:You cannot use this version of the application iDVD with this version of Mac OSX.
What are my options???

Just a little confused. I already have iphoto, imovie, garage band etc that would be in a ilife download so what are the benefits? Currently, when I click for software upgrades, there are none. Would downloading ilife really change anything?

DVD will not stop and start in a Menue Mode

Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
The DVD is a NTSC, SD, single layered 2.9GB
Any help would be much appreciated, Thanks.
Mike
PowerBook G4 15 1.25 ghz Mac OS X (10.3.9)

If only five months old it is still under warranty. Take it back.

DVD will not play on iMac in Bootcamp using Windows 8

I am trying to play a DVD in Windows 8 being run with Bootcamp on my iMac (OSX 10.9). The DVD will not autoplay in Windows. You can see the DVD in the folder view, but can only access the Video_TS and Audio_TS files, not the actual playable DVD. Have tried playing it through the folder view as well as Windows Media also to no avail. Booted down Windows and into Mac OS, and the DVD autoplays just fine. How can I get it to play in Windows mode, as the software we are running for a certain program needs to be accessed constantly before and after the DVD needs to play?

tried the vlc player it's free to download and works better then other players really

DVD will not play on standalone.

Ok so here's the deal. I imported my DVD using MpegStreamClip - this is a DVD previously built by me, but back in the days I used Pinnacle... which wasn't so long ago. I imported this DVD as .m2v and AIFF audio, and built a project in DVDSP 4. The simulations run fine and I have had no problems up until the point that I burn the DVD, and the DVD will not play on a standalone player.
When outputting from DVDSP, do I need to Burn/Build/Format/Build&Format? Is it one of my settings that I need to change?
I know this question has been asked before, but there seems to be no solution out there yet.

I have an HVDVD_TS folder, but not the usual VIDEO_TS folder - could this be evidence of my problem?
It's the smoking gun.
Keep your m2v files.
Take the aiff files and encode them in Compressor ac3/Dolby 2.
Create a new project in DVD SP. Make certain the SD button is selected.
Import ac3 and m2v assets and you are good to go.

DVD will not complete using FCP share

I am trying to burn a DVD in FCPx. The audio and video files are created but the DVD will not finalize. The progerss bar sits at 95%. What should I do. I have been able to create DVD's in this way in the past.

Can you try another project to see whether it is a project-specific problem? (You can choose HD as output device so you don't waste media.)
How long is your movie and what is its format?
Russ

I-DVD created DVD will not play back on i-Mac 27"

The i-DVD Tutorial says "When you have burned your DVD, you will have your own DVD that can be played in any DVD Player or any DVD-EQUIPPED COMPUTER"
Unfortunately I do not find this to be so, and I would like to know why, please. The DVD created is in UDF form. It plays back perfectly in my Liteon Player via the TV. It will play on my Windows PC via either WMP or Nero, BUT IT WILL NOT PLAY on my i-Mac, neither by Quick Time nor DVD Player. I get the message "not in a form recognised." Goodness! It was created on the i-Mac, via i-DVD !!
All my software is up-to-date of course.
Can anyone tell me WHY?

There are a variety of reasons why a burned DVD will not be recognized by a DVD player.
I'm interested to hear you say that you burned the disk with iDVD and yet the disk does not playback on the same computer that created the disk. If you put a standard purchased video DVD into the computer does it playback? If it does not then I would focus your attention on the Computer / DVD drive itself and not iDVD.
Things to try:
1.) Make sure the DVD disks you are using are compatible with your computer's optical drive. If you use a disk that is not supported by your computer's SuperDrive you may get inconsistent burn results. You can find out what types and speeds of disks your computer supports by going here and looking for the "SuperDrive" section under your model of computer: http://support.apple.com/specs/
2.) Older drives / players may not be able to read newer types of burnable media. Use DVD-R disks that list a lower speed. Burnable media comes with numbering on the original packaging that indicates the speed of the disk (Usually 1x,2x,3x, etc.). The lower the number the more compatible the disk will be with more DVD players.
3.) Try different brands of media. I personally try to stick with media made by companies with a long history of making recordable media.
4.) Lower the burn speed in iDVD:
iDVD > Preferences > Advanced > Preferred DVD Burning Speed
-- The lower the number you choose the more compatible the resulting disk will be with more DVD players. It will also increase the amount of time it takes to burn the disk.
Hope that helps

CS4 DVD will not start

I am running XP Pro with SP3 and all current patches. My dvd drive is a Plextor PX-760A. At first neither the CS4 application dvd nor the Learning dvd would start in my drive.
Then I flashed the drive firmware from 1.04 to 1.07.
This drive uses the windows drivers. Plextor does not supply drivers.
After flashing the firmware the CS4 Learning dvd starts fine. I also found my CS3 dvd and it also starts fine.
However, the CS4 application dvd will not spin up. The drive makes 2 faint beeps, tries to spin up the disk a few times and then gives up.
Any suggestions on what I might try before calling Adobe and asking for a replacement disk?

Success!
A PC at the local library was able to spin up the Photoshop CS4 DVD. I then copied the files to an sdhc card via a USB card reader that I brought with me. Those files take a bit under 4GB.
Back home I scanned the card for malware, copied the files to an empty partition on one of my drives and then installed.
Installation was smooth, my serial # was accepted, and I have opened both Bridge and PS. I am good to go.

Our dvd will not eject

The cd dvd will not eject. Are there any tricks out there to help get this problem figured out?
jwe67

use the F12 or eject key on the keyboard.
If the disc will not eject try dragging the disc icon to the trash.
If the disc will still not eject, hold down the trackpad or mouse button after restarting the computer should also eject a disc.
If the disc continues not to eject, reset the System Management Controller (SMC) and try steps 1-4 again.

Will Not Copy After Being Idle

THIS IS A COPYING ISSUE!!! After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print. I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem. Consequently, we purchased a new HP 5740 printer The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work. If you then turned the printer off and immediately turned it back on, it would copy. Again, Comcast reiterated it was a printer problem. I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer. After hooking up the second HP 5740, the same problems with copying occurred. I returned the second HP 5740 to the dealer for a refund and left town for three months. We recently returned and purchased a HP ENVY 7645 printer from another dealer. We are having the same issues with this printer as we had with the two previous HP 5740 printers. I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician. The installation occurred today and we are still experiencing exactly the same problem. The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy. He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem. DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

Hi @lamoso,
Welcome to the HP Forums!
I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
Let's see what happens after giving these two steps a try!
Thank you for posting!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

DVD will not pause after burning

Similar Messages

Maybe you are looking for