DVD will not play on standalone.

Ok so here's the deal. I imported my DVD using MpegStreamClip - this is a DVD previously built by me, but back in the days I used Pinnacle... which wasn't so long ago. I imported this DVD as .m2v and AIFF audio, and built a project in DVDSP 4. The simulations run fine and I have had no problems up until the point that I burn the DVD, and the DVD will not play on a standalone player.
When outputting from DVDSP, do I need to Burn/Build/Format/Build&Format? Is it one of my settings that I need to change?
I know this question has been asked before, but there seems to be no solution out there yet.

I have an HVDVD_TS folder, but not the usual VIDEO_TS folder - could this be evidence of my problem?
It's the smoking gun.
Keep your m2v files.
Take the aiff files and encode them in Compressor ac3/Dolby 2.
Create a new project in DVD SP. Make certain the SD button is selected.
Import ac3 and m2v assets and you are good to go.

Similar Messages

What can I do, if a DVD will not play?

What can I do, if a DVD will not play?

You don't want to change the player Region Code. If I remember correctly you can only change the Region Code three times and it sticks to the last Region Code you selected.
Does the DVD play in another player?

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

Hello there, tomazdes.
The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Particularly:
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

DVD will not play on iMac in Bootcamp using Windows 8

I am trying to play a DVD in Windows 8 being run with Bootcamp on my iMac (OSX 10.9). The DVD will not autoplay in Windows. You can see the DVD in the folder view, but can only access the Video_TS and Audio_TS files, not the actual playable DVD. Have tried playing it through the folder view as well as Windows Media also to no avail. Booted down Windows and into Mac OS, and the DVD autoplays just fine. How can I get it to play in Windows mode, as the software we are running for a certain program needs to be accessed constantly before and after the DVD needs to play?

tried the vlc player it's free to download and works better then other players really

Finished DVD will not play

Hi,
I have burned my project to a DVD using FCPX. The problem is that it will not play in my DVD player (8 year old Sony player). It gets stuck on the first picture but the sound is running. I tried to play it on the Mac and on a PC, but the same problem there.
The project is made with HD1080i and 50i frame rate. When burning I set everything to default.
The camera I am using is a Canon Legria HFM46
Any ideas what the problem might be?

One thing that comes to mind is that your player may not be able to handle the default compression settings that FCP uses. If you have Compressor, you could dial those down to see whether that fixes playability problem.
If you follow Emilia's advice and make a disk image you can also reduce the burn speed, which might be a cause. It's not clear from your most recent response whether it played from the img on your computer. Sharing to DVD from a 1080 sequence should work perfectly well otherwise.
Good luck.
Russ

DVD will not play on a Windows machine

I authored a project that is a simple looping movie. I has not interface, I just set the .mov to start playing and continually loop. It plays fine on my MAC but will not play on a windows machine from a DVD. The files included on it are all .bup .ifo, and .evo files. This is unusual because typically all the DVD burned .vob files to a DVD. Is there some setting I am missing when burning the dvd?

Wellcome to the forum!
What software are you using to play the DVD? If you make a little search in this forum you'll find a lot of threads about problems with DVDs running under Windows Media Player.
You can download free VLC Player to test your disks in Windows.
How did you burned the disc? If you want to be sure you are burning the right disc format anf the right files, make a Image file from DVDSP and burn it with Toast or Disk Utility. Take a look at this link for Creating Disc Image in DVDSP (from www.kenstone.net site).
Hope it helps!
Alberto

DVD will not play in PS3

I am using ILife '08 to render and burn family dvd. The video is imported from Canon HD20 camera. Iphoto project as well burned on dvd. I am using one of the 7.0 themes from IDVD 16:9 ratio. I am using a Fujifilm -R dvd media. The first menu will load and play but when I select either the movie menu or the iphoto menu on the DVD it locks up and will not play.
I tried a regular DVD player and it plays but is jumpy on it. The video is about 3 minutes long but the it jumps around almost like the dvd is scratched (it is not) and only really plays about 1.5-2 minutes of the video. Does anyone have any suggestions.
The dvd plays fine in my macbook pro.

I wouldn't worry too much about Toast not working well with i-apps. My honest opinion is that Toast should be part of the i-Life apps since it DOES work so well.
I only have Version 7 though and not 9 (so I can't really comment on Roxio's latest and greatest app).
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

DVD will not play in standard player?

Rookie to DVDSP. Created project in FCP, exported using Quicktime movie, brought into DVDSP and created dvd, first as HD DVD and read that a standard dvd player will not play so I created new project using all standard settings and still nothing. Dvd player says cannot read disc. I have watched entire tutorial on Lynda, read manual, and researched topics concerning this but am still stumped. Probably something simple but I'm really over my head and have wasted a pile of dvds. Any help would be appreciated.

First of all thanks again, watched Lynda tutorial on compressor and was able to compress. Ok, used setting for creating dvd in compressor. When compressor was finished it asked me to insert media to burn to disk. I did. The resulting dvd plays on my dvd player but looks horrible. Way too bright and nothing close to my project in FCP. From some of the tutorials and discussions I've read I'm assuming it is because my color levels are not correct?
Message was edited by: John Applewhite

I-DVD created DVD will not play back on i-Mac 27"

The i-DVD Tutorial says "When you have burned your DVD, you will have your own DVD that can be played in any DVD Player or any DVD-EQUIPPED COMPUTER"
Unfortunately I do not find this to be so, and I would like to know why, please. The DVD created is in UDF form. It plays back perfectly in my Liteon Player via the TV. It will play on my Windows PC via either WMP or Nero, BUT IT WILL NOT PLAY on my i-Mac, neither by Quick Time nor DVD Player. I get the message "not in a form recognised." Goodness! It was created on the i-Mac, via i-DVD !!
All my software is up-to-date of course.
Can anyone tell me WHY?

There are a variety of reasons why a burned DVD will not be recognized by a DVD player.
I'm interested to hear you say that you burned the disk with iDVD and yet the disk does not playback on the same computer that created the disk. If you put a standard purchased video DVD into the computer does it playback? If it does not then I would focus your attention on the Computer / DVD drive itself and not iDVD.
Things to try:
1.) Make sure the DVD disks you are using are compatible with your computer's optical drive. If you use a disk that is not supported by your computer's SuperDrive you may get inconsistent burn results. You can find out what types and speeds of disks your computer supports by going here and looking for the "SuperDrive" section under your model of computer: http://support.apple.com/specs/
2.) Older drives / players may not be able to read newer types of burnable media. Use DVD-R disks that list a lower speed. Burnable media comes with numbering on the original packaging that indicates the speed of the disk (Usually 1x,2x,3x, etc.). The lower the number the more compatible the disk will be with more DVD players.
3.) Try different brands of media. I personally try to stick with media made by companies with a long history of making recordable media.
4.) Lower the burn speed in iDVD:
iDVD > Preferences > Advanced > Preferred DVD Burning Speed
-- The lower the number you choose the more compatible the resulting disk will be with more DVD players. It will also increase the amount of time it takes to burn the disk.
Hope that helps

HT5630 I am attempting to watch a DVD on my macbook air with the apple super drive but the dvd will not play.

I am trying to watch a DVD on my Macbook Air using the Apple super drive but it will not play. I can view CDs but not watch movies. Can someone give me instructions on how to watch a DVD?

Help Needed. DVDs will not play on my imac, they used to play.

The auto selection will not load my idvd app selction when I'm asked what to do when a dvd is loaded into the drive and of course the mac will not play the dvd.
The dvds are playing fine on my mac book pro no problem so its not the dvds, so I really am stuck with this, please help!!
Cheers

Dave Angel wrote:
There are a selection of disks to look at or repair, not sure which one to work on
Select Macintosh HD... Usually the Top of the List in the column on the Left...
1)     In Disk Utility, on the Left Side Column, select the disk you want to check.
2)     Click First Aid.
3)     Click Verify Disk Permissions to test permissions.
          Wait until it is Completed...
4)     Then, Click Repair Disk Permissions to test and repair permissions.
          Wait until it is Completed...
5)     Quit Disc Utility and Restart your Computer

My cd and dvd will not play

my cd and dvd will not play

Ah, I'm sorry! I think I misunderstood your second post. Open the Start Menu and click "Computer." A window should open that shows the drives in your computer. Is one of the icons your DVD drive? What drive letter is it? Is the the D: drive?
Put a disc in the computer. Tell me a little about the disc. Is it a CD or a DVD? Is it a retail version of something or is it a homemade, recorded disc? Is it computer data (such as an application, game, or documents), a music CD, or a movie?
Once the disc is in the computer, right-click on the disc drive in the Computer window we opened and select "Open." What happens?
- Peter

Superdrive dvd will not play

I insert a dvd into my USB superdrive (attached to my iMac) and I can hear some mechanical things taking place then the dvd is ejected.
the last thing I was doing was running a dvd writing program on a Windows VM with some Clone DVD software writing to disk. I left the machine to run on its own and when I returned the next morning I saw that the write had failed. My iMac was running very slowly. Initially my super drive would not accept any disks but after reboot the problem "disappeared".
Now none of my DVDs will play.

Disconnect the drive, reset the SMC and PRAM reconnect and see if it helps.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

DVD will not play in dvd player

Hi,
I created a dvd in dvdpro and put into my dvd player and it says it can not play my dvd. Is there some sort of setting that I missed?

You misunderstand. You most likely created and burned an HD DVD in DVD Studio Pro.
iMovie will only build and burn standard DVDs so of course it will work.
Drew put up a link to another thread where this is discussed is excruciating detail. Read through it and you should be on you way to addressing your problem.
x

Dvd will not play in color

We recently purchased a samsung plasma/HD/3D tv. We have an older model Sony home theater system. We understood that we would not be able to use the 3d feature until we upgraded to a blue ray player but we thought everything else would work. We have transfered everything and everything works except the dvd now only plays in black and white. We have checked all the cables and have switched to a different cable but it still will not work. Are these systems not compatable? do we have to upgrade to a new dvd player? Does this have to do with it being a 3d tv? Or do we not have it installed correctly? Any ideas?

On samsungs, the composite input for picture (yellow cable) uses the same input that you would put the green component cable. So if you are using a 3 cable setup from the dvd and wii, the yellow cable needs to been in the green port. And make sure the red and white cables (audio) are in the audio inputs of the tv. If they are right next to the yellow cable, they are in the wrong spot and the tv will think your using component cables giving you a black and white picture. The audio inputs should be labeled.

DVD will not play on standalone.

Similar Messages

Maybe you are looking for