DVD will not POP OUT ?

Hi guys has anyone had this problem where there DVD will not pop out but you can hear it trying ?
B540 i5
Solved!
Go to Solution.

hi Buckie,
I've seen some issues like these on laptops but not recently on the IdeaCentre B540 (your issue might be similar to this thread though).
Can you try to:
1. Press WinKey+E to open Windows Explorer. On the left pane, check if you can see the CD/DVD drive then do a right click > eject to open the CD/DVD tray.
2. If same problem, use a paperclip to force eject the DVD tray
Spoiler (Highlight to read)
Credits to this website for the picture.
Credits to this website for the picture.
3. Open Device Manager (press Winkey+R > type devmgmt.msc) and verify that the CD/DVD drive have no errors (exclamation or question mark right next to it). If this is ok, verify that you see the CD/DVD drive when you open Windows Explorer (see Step 1). If it's not visible, apply this microsoft fix.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

TS3274 Just got an ipad and can't open the SIM Card slot - is it meant to be spring loaded - as it comes with a little tool that you poke in the hole, but it will not pop out any help please?

Just got an ipad air, ordered from Apple online store, can't open the SIm card slot - comes with a special tool, but is it meant to be springloaded and just pop out? I think it is faulty.

Push pin in firmly (tap to enlarge image)

External hard drive will not pop out of my desktop

I just bought a Simpletech Signature Mini 250 GB external hard drive but the external HD does not launch on my desktop or utility. I contacted the Simpletech Tech Support but no one answered... Please help!
The external HD is connected via a USB plug to my Powerbook G4 laptop and it is compatible with my MAC OS.

I am having the EXACT same problem!! Please let me know if you figure it out!! Thanks!!

Memory slots on D7-6100 will not pop up

Trying to re-install memory after repairs on my D7-6185. Went down to shell for repairs Have double/triple checked rebuild.
H
Memory slots will not pop up to all install of memory cards. Nothing is blocking them physically. At the point of pulling out hair.
Ideas?????
Marie

Hi,
I can't find any D7 model. If a DV7, gently use your fingers to widen the latches and put it down a bit, it should pop up otherwaie use a thin plastic to help it to pop up.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DVD will not play on standalone.

Ok so here's the deal. I imported my DVD using MpegStreamClip - this is a DVD previously built by me, but back in the days I used Pinnacle... which wasn't so long ago. I imported this DVD as .m2v and AIFF audio, and built a project in DVDSP 4. The simulations run fine and I have had no problems up until the point that I burn the DVD, and the DVD will not play on a standalone player.
When outputting from DVDSP, do I need to Burn/Build/Format/Build&Format? Is it one of my settings that I need to change?
I know this question has been asked before, but there seems to be no solution out there yet.

I have an HVDVD_TS folder, but not the usual VIDEO_TS folder - could this be evidence of my problem?
It's the smoking gun.
Keep your m2v files.
Take the aiff files and encode them in Compressor ac3/Dolby 2.
Create a new project in DVD SP. Make certain the SD button is selected.
Import ac3 and m2v assets and you are good to go.

Blank 16x DVDs will not burn in internal DVD burner

Hi
Some blank 16x DVDs will not burn in the internal DVD burner on my iBook G4.
My iBook tries to load the DVD-Rs but it spits the DVD out after 2 tries.
Any reason why
iBook G4 Mac OS X (10.4.8)

It could be just the brand you are using.

I-DVD created DVD will not play back on i-Mac 27"

The i-DVD Tutorial says "When you have burned your DVD, you will have your own DVD that can be played in any DVD Player or any DVD-EQUIPPED COMPUTER"
Unfortunately I do not find this to be so, and I would like to know why, please. The DVD created is in UDF form. It plays back perfectly in my Liteon Player via the TV. It will play on my Windows PC via either WMP or Nero, BUT IT WILL NOT PLAY on my i-Mac, neither by Quick Time nor DVD Player. I get the message "not in a form recognised." Goodness! It was created on the i-Mac, via i-DVD !!
All my software is up-to-date of course.
Can anyone tell me WHY?

There are a variety of reasons why a burned DVD will not be recognized by a DVD player.
I'm interested to hear you say that you burned the disk with iDVD and yet the disk does not playback on the same computer that created the disk. If you put a standard purchased video DVD into the computer does it playback? If it does not then I would focus your attention on the Computer / DVD drive itself and not iDVD.
Things to try:
1.) Make sure the DVD disks you are using are compatible with your computer's optical drive. If you use a disk that is not supported by your computer's SuperDrive you may get inconsistent burn results. You can find out what types and speeds of disks your computer supports by going here and looking for the "SuperDrive" section under your model of computer: http://support.apple.com/specs/
2.) Older drives / players may not be able to read newer types of burnable media. Use DVD-R disks that list a lower speed. Burnable media comes with numbering on the original packaging that indicates the speed of the disk (Usually 1x,2x,3x, etc.). The lower the number the more compatible the disk will be with more DVD players.
3.) Try different brands of media. I personally try to stick with media made by companies with a long history of making recordable media.
4.) Lower the burn speed in iDVD:
iDVD > Preferences > Advanced > Preferred DVD Burning Speed
-- The lower the number you choose the more compatible the resulting disk will be with more DVD players. It will also increase the amount of time it takes to burn the disk.
Hope that helps

Our dvd will not eject

The cd dvd will not eject. Are there any tricks out there to help get this problem figured out?
jwe67

use the F12 or eject key on the keyboard.
If the disc will not eject try dragging the disc icon to the trash.
If the disc will still not eject, hold down the trackpad or mouse button after restarting the computer should also eject a disc.
If the disc continues not to eject, reset the System Management Controller (SMC) and try steps 1-4 again.

Airport CD will not come out

I have been trying to eject the AirPort Extreme Disc and it will not come out. I have tried several ways, iTunes, the eject botton on the keyboard, the file menu. When I try to eject it make a little noise and the then the disc disappears off the desktop but it is not ejected. I then have to restart to get it to appear again.
suggestions?
Thanks,
1.25 Power PC DP G4 Mac OS X (10.4.7) many macs

ebhome, Welcome to the discussion area!
Check out the suggestions in KB 88215, Power Mac G4: How to Eject a Disc From the DVD or CD Drive.

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will not play, any suggestions?

Hello there, tomazdes.
The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Particularly:
Accepts discs but they don't mount or are automatically ejected
Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
Reset the System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Cannot open photoshop, illustrator, indesign. when I try to open them, nothing come out, the adobe application manager will automatically pop out.

cannot open photoshop, illustrator, indesign. when I try to open them, nothing come out, the adobe application manager will automatically pop out.

go to the installation directory (not a shortcut) and confirm they're installed and try to start from the install directory.

My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario

HT1414 my iphone 4 running on IOS 5 will not come out of recovery mode and gives the error code -1. Can any one help me please because i've been without a phone for 2 weeks and still not getting anywhere.

Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your time

This is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.

Ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help

ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it

lol ok nvm i fixed it

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

DVD will not POP OUT ?

Similar Messages

Maybe you are looking for