DVD will play on MacBook not on DVD player

I burned a slideshow with music using iDVD. On the MacBook it plays fine. On the dvd player the music is clear, but the pictures scroll vertically on the screen like on old film projector. I decreased the burnspeed to 1x with no effect. I am using DVD+R and they work fine when my wife burns things on her PC.
Any suggestions?

Hi
When iDVD starts to behave funny then it usually is corruption to this file that's
the cause.
This is very common.
• Quit iDVD
• Locate it at - Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and it is named. com.apple.iDVD.plist
• Move it to desktop - or trash it
• iDVD will make a new error less one at next start-up of iDVD
To set up a new user account and log into this does the same - but discards
lot's of other eventually faulty ref. files.
Yours Bengt W

Similar Messages

  • After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

  • IPhone 4 - my phone doesn't "ring"...  Speaker plays, it works on vibrate, and when you set the ringer, it will play.  Just not when an incoming call comes in.  Any thoughts?

    iPhone 4 - my phone doesn't "ring".  Speaker plays, it works on vibrate, and when you set the ringer, it will play.  Just not when an incoming call comes in.  Any thoughts?

    Check the position of the mute switch. On the side, just above the volume keys.

  • How can I burn CDs that will play on my car stereo CD player?

    How can I burn CDs that will play on my car stereo CD player?

    Make sure the format when you burn your playlist is one your car's CD player will recognize. Typically mp3 songs are readable now but when in doubt, burn an audio cd. Yes, you will get less songs per cd (as compared to mp3 formatted one) but you are guaranteed the cd will work in any place.  Most cars have it written on the radio somewhere what formats it can read for CDs.. Good luck!

  • DVD will play on iMac, not on DVD player

    I'm burning dual layer DVDs from iDVD. The DVDs won't play on my DVD player, but will play fine using the DVD player on the iMac. Anyone have any idea why?

    But for 6 hours of VHS video, it will take two DL DVD disks.
    You might want to think about importing the footage into iMovie and editing it.
    I put footage from about 35 VHS tapes and about 40 Hi-8 tapes onto miniDV tapes for importing into iMovie and found that there was a quite a bit of bad footage: shots of ceilings and floors, jerky movements, shots of nothing important. With good editing, the footage total time length was cut down, and I have been able to use single-layer DVDs for all my iMovies. I have put our family's photos and videos onto DVDs in chronologic order. I have now done 30 years worth--the last 10 years were recorded onto miniDV tapes so no conversion needed. Some years took only one DVD; other years had to go on several; a couple of years we were very busy on trips/doing plays and sports and it took 5 or 6 disks for the year.
    If you are not interested in editing, you wouldn't need to use a computer, just get one of those VHS-DVD converting machines.

  • 10.5.2 iTunes on Windows 7 x64 bit laptop - Quick Time will play videos but not iTunes

    I'm hoping you can help, I've looked for a solution to this for a while now.
    I store my itunes library on an external hard drive. I completed a clean install of x64 bit Windows 7 on my laptop - all went perfectly. Downloaded and installed the 64 bit version of 10.5.2 iTunes and located my library...the music plays fine but no videos. I opened iTunes in safe mode and it said that I needed the up to date version of Quick Time. Downloaded and installed that...no problems. Now my vidoes will play in the Quick Player but still not in iTunes! They apprear in the "Now Playing" pane but the timer doesn't move - even after pressing pause and play. Can anyone help me please? Do I need to open iTunes in 32 bit mode? If so, how do I do that in Windows 7? i can only find solutions for Mac's....
    Thanks in advance

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • C655D-S5041 Will Play CDs But Not DVDs

    I'm running Win7x 64bit Home Premium, the CD/DVD drive is a TSScorp TS-L633Y ATA.  It plays CDs just fine, but when I load a DVD, it spins a bit and / or does nothing.  I've tried Windows Media Player / Classic and VLC, but it won't play DVDs. I checked the CD/DVD driver via my device manager, it is recognized (no yellow exclamation icons) and it says that the driver (6.1.7601.17514) is up today, even though it is dated 6/21/06.  I have tried uninstalling / reinstalling the device, but I always get the same driver coming back.  I checked the Toshiba website to see if there were any specific CD/DVD drivers that I could update to, but there doesn't appear to be anything else. I typically watch DVDs via home player, not my computer, but this is annoying. If anyone has worked through this issue, I'd sure like to hear from you.  My laptop has been rock solid otherwise, but this is really making me crazy...(!).  Thanks! -

     Just as a follow-up to anyone else having this problem, I ended up going to https://tsstodd.com/eng/firmware/faq/ and running the firmware LiveUpdate utility.  It worked.  I can play CDs / DVDs without any problems now(!).

  • Audio in .swf file will play on Mac, not on PC ...

    here is another one i need help with.
    I have a .swf file on the stage. when you press the space
    bar, or press a button on the .swf, audio plays. This works
    perfectly on a Mac. On a PC, the .swf file annimates as it is
    supposed to, but there is no audio. When i open the .swf file in
    internet explorer on a PC, it works as it is supposed to, so its
    not a problem with my speakers or anything.
    Thoughts? ... why would the audio in flash member play on a
    Mac and not a PC? ... am I missing a setting somewhere?
    thanks a million in advance!
    And, in case it matters, this is being deloped with director
    MX 2004, Mac 0S 10.5, PC running windows XP.

    Please don't post the same question to as many forums as you
    can find.

  • Adobe premire  CC will play audio but not video

    Hello guys I'm having an issue i recently upgrade my pc and added a second video card I have two amd readeon r9 290 with crossfire enable. Last night after installing both video card I ran premire and it would show the thumnail of my video but when i played it back only the audio would play but not the video.
    Pc specs
    Cpu: amd fx 8350
    Motherboard sabertooth 990fx r2
    2x readon ati amd r9 290
    Thanks in advance for the help

    http://docs.info.apple.com/article.html?artnum=302828

  • IPod Nano ad will play with VLC, not with QT Pro 6.5.2

    I downloaded the new iPod Nano ad from apple's website but all I get is music when I play it and a message saying that there may be some problems with video (QT Pro 6.5.2). I tried it wih Video Lan Client and it played without problems. Is QT 6 unable to play it ? Do I really need QT7 ?

    I think we both are taking each other a little too seriously I appreciated your correction (which, when now rereading my response is not very obvious). My skills were not slighted
    I have Panther on my external for the same reason.
    It's certainly not the first time I've been wrong on these boards and won't be the last, but that's the reason I post here- to learn. Thanks again for the clarification.
    JC

  • PowerPoint Presentation in Keynote will play video but not audio

    I made a presentation in powerpoint and sent it to Keynote. I have four videos in .m4v format embedded in the presentation. When I open it in Keynote, the video plays but the audio does not. How do I fix this? The presentation is saved in .pptx.

    itunes on the computer play tons of different formats
    the atv only play the ones listed in spcs
    http://www.apple.com/appletv/specs.html

  • Can no longer burn cds that will play in my car's cd player

    Yesterday I tried to burn a replacement CD for one that got damaged. The disc was one I created in Itunes a couple of years ago. It won't play in either my sound system's cd player or my car's. The only thing that has changed is the version of Itunes (current) and my OS which is now 10.6.8. I also bought an album from Wofgang's Vault, and got identical results. I tried to burn in both Itunes and straight to the CD burner. I tried audio format vs MP3. I tried a windows machine with a different CD burner, the same machine actually that I was burning Itunes discs on originally. Same results. Is this a Rights Management issue? Has something changed recently in this regard? How do I make CD's that I can play in the car?
    Thanks for your help
    Philip

    Get a different band of CD-R.

  • Publish settings so it will detect earlier versions, not just flash player 10.2!!

    How to i change the publish settings in cs4 (action script as2) to detect like flash player 7 or 8 not just 10. Cuz not alot of people have the newest flash player????? it has a spot where i can change it but only the decimals......10."0"."2".....the numbers in quotes are changeable but not "10"...any ideas??

    file/publish settings/flash and select the fp version you want.

  • [SOLVED][KDE4]Only system sounds will play

    I'm not sure if this belongs here or in the DE section, so please move it if you see fit.
    I'm having a bit of a tricky issue with KDE, all the system sounds will play, but nothing else. I'm currently using the gstreamer phonon backend with ALSA. I've seen some forum posts from the gentoo wiki with similar problems but it seems it was just a mixed mess of deleting .folders and other configuration files. I've also tried to use the VLC phonon backend but to no avail either. I'm wondering if anyone else has this problem and has a coherent solution.
    So far I've tested playing audio files in VLC and videos on youtube. My alsa device is fully configured and will play audio, just not output from programs that are not part of the plasma environment. I have also looked to the wiki for a solution but it only seems like it has solutions for audio conflict problems, which is all sorted out for me.
    Last edited by jjsullivan (2011-05-25 04:22:50)

    i recently had a gstreamer issue that i solved today as well.  run a pacman -Ss gstreamer0.10 to see which packages you have installed.  you might need to install the gstreamer0.10-plugins group of packages, as i did.
    this might be completely different from what i went through, since i'm not using phonon or kde, but it's worth a shot.  worst case scenario is you uninstall the extra packages afterwards.
    another option to try (which didn't help me, but was a solution for SOMEONE i found through my searches) was to compile and reinstall a fresh version of the gstreamer0.10 package.  abs makes it so simple to do, it's also worth trying.

  • I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

    Probably because they don't accept that media.
    Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

Maybe you are looking for