DVD won't play in ordinary player

Hi,
I'm quite new to the whole process of creating DVDs, so I tried using iDVD but it's a terrible program so Iäm trying to use DVD Studio Pro without knowing much about it. I've burned a DVD using it and it won't play on an ordinary player. It simulates fine in DVD Studio, and it plays back fine on the computer, but simply doesn't register in any DVD player. Can anyone suggest any reason why this might be the case?
Thank you all in advance for your help!
Kinkersnick

Thank you for such a quick reply! Ok, so here's a bit more information. The DVD is actually only a single video (of about 60 mins.) which has the first play set to it - the little disc with play arrow on it in the graphical display. The disc is an SD DVD not an HD DVD (first, and only, thing I thought would be the problem). Here is a copy of the burning details:
Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Warning: The file ‘WIMWENDERS.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
I don't know if any of this is relevant though. I#m confused as to what the two errors at the beginning mean... perhaps they have something to do with the problem???
The media used is DVD-R and has been tried in 3 different players, all relatively new, which suggests to me it's unlikely to be the media.
I'm at a total loss here, so I would appreciate any and all help!
Thanks in advance,
Kinkersnick

Similar Messages

Burned DVD won't play on outside player but OK with Toast

Here we go again!
After scanning the other posts I still cannot find anything to make my problem go away.
Situation: New G5 Quad and all of HD Suite installed.
Have gone through DVDPro advanced tutorial OK.
Burned to Memorex DVD-R media.
Plays great on G5, and a G3 that I still have, with DVD Player app.
But after trying disc on 3 different outside players they still come up with "unreadable disk" or "bad disk".
Players are relatively new - one mf'd within the last year in a TV combo, and the other, my favorite, Apex AD1200.
I figure if something will play on ANY machine, it will play on the Apex.
I have burned the same file to Toast 7 using the DVD Video from VIDEO_TS option and have been able to play it on my Apex with no problem.
However, inserting this "Toasted" disk into my computer gets me everything except the audio.
I have talked to Support and they do not cover this problem, but pointed me to a page on the Apple website for deleting preferences, which I have done with no effect, and have done a clean re-install of the application, again with no change in what I am getting when re-burning disks.
Anyone have any ideas as to what needs to be done to make this application work properly?
G5 Quad Mac OS X (10.4.5)
G5 Quad Mac OS X (10.4.5)

GENTLEMEN -
I posted this to the BMUG website subsequent to chasing down the suggestions offered at that time.
So far the response has been ZERO . . .
At the March 20 meeting I brought up my problems with selecting the correct media for burning my DVD Pro files so that they would play well across a range of dvd players out in the real world - approaching what you expect when you buy a commercially produced DVD movie.
I’m running the G5 Quad, and have the Final Cut Studio HD package.
I am simply looking for some guidance from Apple. Is there a favorite media that has been settled on by Apple, or Apple employees by word of mouth?
One of the attendees stated that he had no problems with his machine or disks that he produced. I wish to communicate with him as to exactly what he is doing and what he is using to be problem-free.
Another attendee suggested I contact the drive manufacturer and ask what media they recommend. Problem is, there is nothing in the Apple profiler that tells me who manufactured this drive. All I can glean from my profiler is the model number, which is HL-DT-ST DVD-RW GWA-4165B. Other forums suggest it is a Hitachi. My own investigation yields the probable manufacturer as LG Electronics. They do not show that EXACT model number (the last 4 digits are slightly different) in their lineup, so I am assuming it is a special build for Apple. So much for that line of inquiry.
I initially used DVD-R media. This played back OK on my computer DVD player, and about 2 out of 15 other DVD players I sampled. Using the same media and file, I burned a disk using Toast 7 on the superdrive. It played fine on three players it did not play on before. I only used the ones that I had immediate access to.
When I switched to 2 different DVD+R media I got the same results as the “Toasted” -R disk.
Why is it OK with Toast on the superdrive, but not with DVDPro on the superdrive???
There is no question about the correctness of the file itself. It is the completed Advanced Tutorial for DVD Pro.
I cannot proceed with projects I have until I can be certain that I am not producing coasters for the majority of the dvd readers out in the real world. I purchased all this gear just so that I could do what it promises can be done with it.
Some answers.
Please.
G5 Quad Mac OS X (10.4.5)

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

I used iDVD to create an IMG file
You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
OT

IMac 2008 OS10.9.1 external dvd won't play movie DVD's

iMac 2008 OS10.9.1 external dvd won't play movie DVD's. Other DVD/CD's are recognized.
My internal DVD/CD p-layer/burner stopped working 3 years ago like many other iMacs did.
Any help would be greatly appreciated. This is all red because I am ******!

I have discovered, no thanks to Samsung techs, what the problem is, and it might be revealing for others, as well. It seems that DVD Player, which is the app Apple provides in OS x for (naturally) playing videos, doesn't work with external drives if the computer has an internal drive – even when, as in my case, the internal drive is dead.
I have learned, however, of the existence of a couple of alternative, free applications that run video and audio disks with external optical drives, and one of them, at least (VLC), seems to be widely acclaimed. Does anyone know whether bypassing DVD Player could be a bad idea? There were some gripes from one or two reviewers about awkwardness with playing audio DVDs with iTunes, but I'm not sure what they meant when they said that you have to click on individual items in a selection. Would that mean, for example, having to click on each movement of a Mozart trio? That I couldn't play an entire album's contents of another kind of music without clicking on each song?
Getting the internal optical drive replaced would be prohibitive, even if the parts could be obtained, so I guess I'm stuck trying to deal with the external drive I have and finding the best replacement for DVD Player that I can find. The interesting thing is that the drive works beautifully with a MacBook Air I tried it with, so I guess that is because the Air doesn't have an internal drive?
Wouldn't you think that Samsung techs would know all this? The one I spoke to told me to make sure that my system preference for CDs and DVDs was set to open automatically with DVD Player and sent me all kinds of FAQs, plus a way to get an RMA number for a return. Not a word about difficulties with Macs having an existing internal drive. And all after spending a very long time talking with me about what was going on, what the error message was, and so on. I guess the message hasn't gotten to them.
I hope this information will be helpful to someone.

Short content DVD won't play

I've had this problem for years, and I've finally decided to ask. Every time I make a short content DVD with under about 10 minutes of content, my finished Encore DVD won't play in some players. The amount of data written by Encore is visibly small on the disc. I've noticed however, that if I take the same content, and master it in Nero rather than Encore, the content on the disc (burn area) is much larger and it plays just fine on every player. Is there anything within Encore that I can change to eliminate this problem?
Thanks for any thoughts.

"Probably" the reason nero doesn't have the problem is the same as for ImgBurn: it automatically pads the total size. I never remember to pad tiny disks anymore, because I have become dependent on the autopad!
Edit: I see John's second past! That's the other imgburn advantage here: let it figure out the addition!

TS1859 I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

I have a .mov file that won't play in QuickTime Player, MPEG Streamclip or in FCP but plays in VLC, how can I convert it so I can use it in FCP?

hi
download perian from internet, it'll solve your issue.

MP4 H.264 video won't play in Flash Player

I am using a Mac Book, OS X 10.8.5; FireFox 32.0.1; Flash Player 16.0.0.305. I am trying to play video (MP4 H.264 format) that works on VLC, Quicktime Player & Real Player but won't play through Flash Player. Why?

I'll take a look at the GPL sources to see how the firmware encodes the video output, I think the mpeg encoder might be built into the firmware's Linux kernel (instead of a stand-alone encoder program), I see references to the IBM mpeg2 headers but I'm not sure. But honestly addressing this possible bug is not the first thing on my todo list, but I do fidn this report interesting enough to merit investigation.
May I ask what you are using for the Samba server (aka windows shares)? Do you use your desktop PC, or perhaps a NAS server?
As an interim thing to try, I advice you install VLC media player to view the files, or to use VLC to examine the media files properties to see what you can findout.
IF you must use Windows media player, then I suggest you look into the combine community codex package.
www.cccp-project.net/

My OSX 10.2.8 DVDs won't play in OSX 10.6.8. What do I do?

My OSX 10.2.8 DVDs won't play in OSX 10.6.8. What do I do?

Firefox 2.0.0.20 is the last ever release for Mac OSX 10.3.9 and earlier versions. <br />Get it here: <br />
https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
System requirements for Firefox 3.5: <br />
Mac OS X 10.4 and later, Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor, 128 MB RAM (Recommended: 256 MB RAM or greater), 200 MB hard drive space <br />
http://www.mozilla.com/en-US/firefox/3.5/system-requirements/

What format shiould i burn dvd in to play in blueray player? Using MacX DVD Ripper Pro and Handbrake

what format should i burn dvd in to play in blueray player? Using MacX DVD Ripper Pro and Handbrake

MacX DVD Ripper Pro and Handbrake
Neither is suitable for burning DVDs or BluRay media. They are DVD rippers/converters, not DVD authoring tools. Handbrake doesn't produce any format suitable for DVD Authoring. And while MacDVD Ripper can create .mov files even that's not a guarantee the file can be used for DVD authoring. You need DVD Authoring software like Roxio Toast to burn DVDs or BluRay disks.
Most BluRay players can play both standard def DVDs and high def BluRay disks. Which kind do you want to burn? And what exactly is your source media (video) that you want to burn?
And if you want to burn BluRay disks, you need a BluRay burner.

HT1338 Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.

Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.

Because this is affecting multiple DVD's it suggests a faulty drive. If you were willing to spend a few $ or € and purchase an external optical drive from any electronic shop, that would be a sound diagnostic step to take; possibly a solution and cheaper than replacing the internal drive if counting labour is a factor.

DVD Studio pro 4 no longer builds a DVD that will play in any player, is there an update or comparable program?

DVD Studio pro 4 no longer builds a DVD that will play in any player, is there an update or a comparable software available? Or are there some internal fixes that I have not found. Preferences that will allow a clean product to be delivered?

Thank you for your prompt reply. I first import all my assets, build my DVD, which may include one or more menus, pictures, music, etc. I use the simulator to test all aspects of video before burning. Making sure that the end jump works, if I add chapters, going to each chapter making sure buttons and end jumps for the chapters work. When I am satisfied I then go to burn/format function and delete or reuse any folders that the computer advises. The resolution is SD, display mode 16.9, Lossless linking, red laser, single, one side 12 cm. Thats about it. Haven't had a problem in the past just wondering what I could be doing wrong now. I am workingo on an imac, MAC OS X, 10.7.4, 2.93 GHz, Intel Core 17, Memory 8GB, 133mHz,DDR3.
Response I get is, unknown disc, please check disc again."

Cd/dvd won't play on win 7,

cd/dvd won't play on win 7, using hp touchsmart tx2, autoplay option is checked. Have itunes installed also, does this have something to do with it? I have used it recently for lightscribe and copying music to a blank cd...I am not getting any errors, it just won't play..

I am having similiar problems but on a HP DV6700 running Vista.
Can you explain "won't play"? Does it show up in Device Manager? Does it show up in My Computer?
There could be a number of possibilities. Lets try to narrow your resolution.

Copying/burning a dvd, won't play in a dvd player

Before my disk drive was replaced I could take a dvd, copy it and burn it to a disc (i.e., make a copy for myself), ad it would pla in my dvd player
Since then when I make a copy of something and burn it, it won;t play in ant DVD player. Will play onthe computer though
What settings do I need to change?

Musicwind is right, there's no way to do what you describe without third-party tools. A commercial DVD, like what you'd be using in a DVD player, cannot be copied using the Finder or Disk Utility, due to copy protection issues. Are you using something like Handbrake to rip the DVD, or is this not a commercial DVD that you're copying?

Burned DVD won't play in DVD player?

I burned a video I purchased on itunes to a DVD using Finder (dragging and dropping onto disk). It burned fine, but won't play in my DVD player. It will play on my computer though.
Are there different formats you can burn it in? Am I not using the correct format?
I am using a DVD-RW disk.
Any help is appreciated! Thanks.

In iTunes you create a Playlist from the tracks you want and then select it and 'Burn Playlist to disc', just dragging the files in the Finder is just copying the files across and not making a playable CD.

DVD won't play in DVD player, but OK in computer

Hi, I recently made a 500-picture slideshow in iMovie, imported it into iDVD and then burned it. the dvd plays on computers and in my playstation, but won't play on my sony dvd player, which usually doesn't have a problem playing projects that i made on my computer.
any advice would be appreciated.

Hi, I recently made a 500-picture slideshow in iMovie, imported it into iDVD and then burned it. the dvd plays on computers and in my playstation, but won't play on my sony dvd player, which usually doesn't have a problem playing projects that i made on my computer.
any advice would be appreciated.

DVD won't play in ordinary player

Similar Messages

Maybe you are looking for