DVD won't play in Windows XP

Hi
I've been working on a iDVD project this week and my burnt DVD will not play on Windows XP machines.
Plays fine on standalone DVD player and on most of the Macs I've played it on but will not play on any Windows XP machines.
Message is: Windows Media Player cannot play the DVD because a compatible DVD decoder is not installed on your computer.
Thanks to anyone who can help.

.. I still can't get over the fact that you can't but a DVD in a Windows machine and play it! LOL ...
.. be sure: I didn't believed it either.. asked a friend, who's MS-certified-blablabla .. he told me/confirmed me that old "Mac rumor" ...
and he told me: the app is called Windows Media Player, 'cause it plays Windows Media.. and Microsoft didn't invent the DVD .. so ... ;-))

Similar Messages

DVD won't play on windows computer Ever see this prob?

A potential client of mine says he can't play the DVD authored in DVDSP.
"I have not been able to open the DVD and run it. It requires the CinePlayer DVD Decoder Pack 2.3.1-ESD.
Is there another video program available to open the DVD?
I have Windows XP but not this application."
Has anyone run into this issue? The DVD I produced plays fine on stand alone DVD players, my Mac computers and the Window unit my partner in this project has.
To me this sounds like a windows issue or this guy hasn't updated his OS, or he is trying to open the disc like a data disc and not play it like a movie DVD.
I don't want to have probs mastering a boat load of these DVDs. These will be stamped copies so if the person has a DVD player aplication most issues like the above should go away right?
Brad

Brad - it's definitely down to the client to upgrade his software, nothing you can do about that one! Unless he is saying that he can usually watch DVDs using that software, but this one won't play, it sounds to me that he doesn't have any MPEG decoding hard or software installed.
The other thing that springs to mind is that he should be able to alter the default application that WinXP uses for DVD playback. Again, this is something for him to address, not you... sounds like a case of needing to educate the client a little

Dvd won't play on Windows media player

I have used idvd 6 to burn a final cut express movie onto a dvd. However, when I try to play it on my pc, it will not work. It works on a dvd player, but not Windows media player. Is there any way to make this work?
Thanks!

HI there, I am too having this issue, I have never had this problem before. I always test the dvd in my windows p.c. to make sure it is viewable. I forgot to do it this time, and low and behold when I gave it to a few people, they were also not able to view it. 2 pc's in my office keep saying that it is missing an mpg2 plugin so can not play. The other pc, it just keeps playing the main menu, there is nothing for them to click to view it. Now mine at home will not play either, it has no menus on the screen, but it plays the menu music. Now my p.c. is up to date so there should not be any reason it will not play. I have burned at 1x, verbatim disc's etc.. It plays fine on my Mac, but even there I have just noticed that I used to be able to click with the mouse on each title to play. Now I have to scroll on the menu, then play from the dvd player control. Any help would be appreciated. They have been playing on a TV with the player though, thanks as always, Ileen

DVD won't play on Windows XP

I'm using iDVD to create a short slideshow movie for my employer. I've basically imported a slideshow from iPhoto. All I need is for the DVD to bring up the main menu when inserted into any player and then play the short slideshow when that menu option is selected.
Thus far I have had access to DVD+R discs - could this be my problem? If I switch over to DVD-R will the resulting DVD play properly on the Windows side of my Parallels?
It seems like it should be straight forward thing...but I'm stumped.

As it turns out, Windows is super-duper awesome and, though it has WMP and the Nvidia deal that should decode the DVD, it still doesn't play the disc.
Fortnately, this turns out to be an issue with my specific machine - I've tested the DVD-R that I burned on another windows machine that does have a DVD player and it worked fine. The disc also played just fine in my DVD player at home.
Thanks for helping guide me in the right direction!

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

I used iDVD to create an IMG file
You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
OT

TS1489 My songs won't play on Windows 7 version of iTunes. Everything on my PC is up to date. Windows Media Player works fine. I followed the directions and nothing has changed. I have already tried to re-install iTunes but that hasn't worked either.

My songs won't play on Windows 7 version of iTunes. Everything on my PC is up to date. Windows Media Player works fine. I followed the directions and nothing has changed. I have already tried to re-install iTunes but that hasn't worked either. If anyone knows how to solve this problem please E-Mail me at [email protected] or reply to this message.

Itunes worked after reseting my computer to factory setting however had trouble again after syncing my iPod and iPod shuffle. Is this a coincidence or could it be the cause of the problem?

IMac 2008 OS10.9.1 external dvd won't play movie DVD's

iMac 2008 OS10.9.1 external dvd won't play movie DVD's. Other DVD/CD's are recognized.
My internal DVD/CD p-layer/burner stopped working 3 years ago like many other iMacs did.
Any help would be greatly appreciated. This is all red because I am ******!

I have discovered, no thanks to Samsung techs, what the problem is, and it might be revealing for others, as well. It seems that DVD Player, which is the app Apple provides in OS x for (naturally) playing videos, doesn't work with external drives if the computer has an internal drive – even when, as in my case, the internal drive is dead.
I have learned, however, of the existence of a couple of alternative, free applications that run video and audio disks with external optical drives, and one of them, at least (VLC), seems to be widely acclaimed. Does anyone know whether bypassing DVD Player could be a bad idea? There were some gripes from one or two reviewers about awkwardness with playing audio DVDs with iTunes, but I'm not sure what they meant when they said that you have to click on individual items in a selection. Would that mean, for example, having to click on each movement of a Mozart trio? That I couldn't play an entire album's contents of another kind of music without clicking on each song?
Getting the internal optical drive replaced would be prohibitive, even if the parts could be obtained, so I guess I'm stuck trying to deal with the external drive I have and finding the best replacement for DVD Player that I can find. The interesting thing is that the drive works beautifully with a MacBook Air I tried it with, so I guess that is because the Air doesn't have an internal drive?
Wouldn't you think that Samsung techs would know all this? The one I spoke to told me to make sure that my system preference for CDs and DVDs was set to open automatically with DVD Player and sent me all kinds of FAQs, plus a way to get an RMA number for a return. Not a word about difficulties with Macs having an existing internal drive. And all after spending a very long time talking with me about what was going on, what the error message was, and so on. I guess the message hasn't gotten to them.
I hope this information will be helpful to someone.

Short content DVD won't play

I've had this problem for years, and I've finally decided to ask. Every time I make a short content DVD with under about 10 minutes of content, my finished Encore DVD won't play in some players. The amount of data written by Encore is visibly small on the disc. I've noticed however, that if I take the same content, and master it in Nero rather than Encore, the content on the disc (burn area) is much larger and it plays just fine on every player. Is there anything within Encore that I can change to eliminate this problem?
Thanks for any thoughts.

"Probably" the reason nero doesn't have the problem is the same as for ImgBurn: it automatically pads the total size. I never remember to pad tiny disks anymore, because I have become dependent on the autopad!
Edit: I see John's second past! That's the other imgburn advantage here: let it figure out the addition!

My OSX 10.2.8 DVDs won't play in OSX 10.6.8. What do I do?

My OSX 10.2.8 DVDs won't play in OSX 10.6.8. What do I do?

Firefox 2.0.0.20 is the last ever release for Mac OSX 10.3.9 and earlier versions. <br />Get it here: <br />
https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
System requirements for Firefox 3.5: <br />
Mac OS X 10.4 and later, Macintosh computer with an Intel x86 or PowerPC G3, G4, or G5 processor, 128 MB RAM (Recommended: 256 MB RAM or greater), 200 MB hard drive space <br />
http://www.mozilla.com/en-US/firefox/3.5/system-requirements/

Music files won't play in windows media player.

My music files won't play in windows media player. all of them have .wpl as the file name extention. Could that be the reason they will not play? Help!

Hi
Please find the link given below please run the Microsoft fix it. Also second might help you as well to resolve your issue.
Information about the Multimedia file types that Windows Media Player supports
Troubleshoot
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

HT1338 Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.

Multiple dvds won't play. Just make spinning noises for a few seconds then ejects.

Because this is affecting multiple DVD's it suggests a faulty drive. If you were willing to spend a few $ or € and purchase an external optical drive from any electronic shop, that would be a sound diagnostic step to take; possibly a solution and cheaper than replacing the internal drive if counting labour is a factor.

When I import a video I recorded to my laptop from my Iphone 5c it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

When I import a video I recorded to my laptop from my Iphone 5c it won't play on window media centre or vec or any medium. Please help??? It plays perfect on the phone.

The format from the phone is :
h.264 encoded video, AAC audio. Both standards of MPEG 4.
You need Windows Media Player version 12 or above to play MP4 (or add the codecs to your current version).

Cd/dvd won't play on win 7,

cd/dvd won't play on win 7, using hp touchsmart tx2, autoplay option is checked. Have itunes installed also, does this have something to do with it? I have used it recently for lightscribe and copying music to a blank cd...I am not getting any errors, it just won't play..

I am having similiar problems but on a HP DV6700 running Vista.
Can you explain "won't play"? Does it show up in Device Manager? Does it show up in My Computer?
There could be a number of possibilities. Lets try to narrow your resolution.

Satellite A200 does not play DVDs won't play

I'm a first time user on this forum so hello to everyone.
My problem is that my (Vista-running) A200 Satellite will not play DVDs. When I try I get the following message: "Windows Media Player cannot play DVD video. You might need to adjust your Windows display settings. Open display settings in Control Panel, and then try lowering your screen resolution and color quality settings. Needless to say, I've played around with the relevant settings and there was no change to the situation. In a response posted at a different forum, someone suggested that I ditch Windows Media Player in favour of something better. I thought the alternative program he suggested would be free but it wasn't. Anyway, I've tried playing DVDs with other programs and got the same basic message. So it's not a Windows Media Player thing, it's a playing DVDs thing. Also, it doesn't matter if WMP isn't the BEST DVD player - I just want to play DVDs!! I've written to a Microsoft customer care helper person and they wrote back saying that it wasn't their problem. They consider it a "hardware matter". I don't buy that.
Just some history - I bought the computer second hand from a good friend. Now I can't remember ever playing a DVD on the computer, which slightly confuses things for the following reasons. Just after I bought the computer, which runs Vista, I installed MP3 player software that disagreed with the CD/DVD player drivers. This I think is a fairly common problem. That time Microsoft reps were happy to help me and told me to delete two key lines of the registry. That fixed the problem to some extent because now the drive a) existed again and b) could read and play CDs. But when I tried to play a DVD I got the above-mentioned message.
So like I say, as I don't remember ever even trying to play a DVD on the drive, I don't know whether or not the problems are related to the MP3 software clash problem, although it doesn't seem unlikely that they are related. Finally, the computer was less than a year old when I bought it and in every other respect it has been fine (Vista's intolerable sluggishness notwithstanding). Sadly the extended warranty has now run out so I hope it's not a hardware problem. The point is that since I've never even played a DVD on this thing, and it plays CDs with no problems (furthermore, the drive can READ DVDs, it can tell me all the chapters that are on a DVD and read files off it - it just won't play movies), I don't think it's hardware. I think there's some bug going on.
If anyone could shed any light on this matter, I would be eternally grateful!
Regards
Tom

Turns out that my confidence in Windows Media Player was misguided.
I wrote and said as much to the Microsoft rep who advised me to look elsewhere for advice.
I further told him that from now on, if I meet anyone with the same problem I will give them the advice with which I was originally provided - don't use Windows Media Player.
Heeding the rep's advice, I looked around on the website for the company that produced my DVD drive (Mat****a DVD-RAM UJ-850S ATA Device) and in other forums, I forget where I found the advice but this media player:
Videolan Media Player Downloadable for free at:
http://www.videolan.org/
seems to play DVDs with no problems. I hope someone else might benefit from the information.
Good luck to all

HP MediaSmart DVD won't play anymore (HP HDX 16 laptop)

Three days ago I used it to play a Blu Ray and it worked fine. Now it won't play blu rays or dvds anymore. What happens is when it opens and it says disc is ready to play, it doesn't go any further than that. When I hit the play button, the "reading disc" symbol pops up for a split second and goes away again.
I tried re-installing the program, even to an older version but still no luck. I have the latest version too. I also tried doing some critical windows updates and some optional ones. Bad part is that my laptop is a few months past warranty so I'm not sure what to do next. Any help would be greatly appreciated.

Try doing a Windows restore point. Pick a date where you know the player was working.
You will find it in the control panel under "Recovery"
If that doesn't work there a number of things to try.

DVD won't play in Windows XP

Similar Messages

Maybe you are looking for