Dvd won't read

i just got a dvd-rom for my g3 lombard, won on an e-bay auction. the model # is M7931( MKE #SR 8174-c ).i could hear it spin up, but it would'nt mount the dvd i had in it.
is there a firmware update or something i should run b4 it will work.
i appreciate any help, thanks
B&W G3 400mhz,768mb ram,40gb WD,15gb Maxtor,DVD-Rom   Mac OS X (10.4.6)   21" Studio Display

thanks for the reply jpl, the drive was bought via ebay auction. everything is working fine now, reads on OSX 10. 3.9 & plays dvd movies when booted into OS 9.2.2 . i just had a 60gb toshiba 5400rpm hdd installed today, installed 9.2.2 then 10.3 on top. again thanks for your reply.
B&W G3 400mhz,768mb ram,40gb WD,15gb Maxtor,DVD-Rom   Mac OS X (10.4.6)   21" Studio Display

Similar Messages

  • 16X DVDs won't read

    I have a G5 PowerMac (latest version I believe). It came with a SONY DVD RW DW-U21A installed. I tried replacing it with a Memorex DVD unit to be able to use 16x DVDs. It still won't read 16x DVDs even though the Memorex DVD drive will burn an dread them just fine in a PC. Is there a special drive that I need or is it a matter of the G5 not being able to read 16x no matter what?

    I think you've got the same "software fault" that's affecting a number of us at the moment.. I'm was trying to log this with Apple but I'm just out of support so they won't help.. They wont even acknowledge my question.. Search on "DVD not reading blank media" or similar..

  • ILife upgrade DVD won't read

    I bought iLife 06 for my eMac but the DVD's won't mount. They have sent three and none will mount. I saw a thread about a firmware update for superdrives but when I attemtpted the upgrade I got a message that it wasn't needed. Anyone else having problems with these software DVD's? standard movies or movies i have burned work fine. cdroms play fine, both factory and burned.

    Is your DVD drive an original part, or is it a third party DVD drive? If it is third party, then you may have some compatibility issues with it. I would recommend calling the manufacturer to see if there are any updated drivers.
    Another thing that you may want to try is to upgrade to Tiger (or reinstall Panther and upgrade it, but this is time consuming and doesn't yield much benefit). The latest version of OS X always has the latest fixes and hardware compatibility patches.
    If all else fails, take the machine and the software into the Genius Bar at the Apple Store and see what they can do about it.
    Good luck to you.

  • DVDs Won't Read - Keep Ejecting

    I'm having trouble with my PowerMac G4 Quicksilver, specifically its DVD drive. Whenever I try to play a DVD movie it just ejects the disc. After persistently reinserting it a few times it will finally mount, but then DVD Player freezes. The Mac OS X DVD works fine as do others, it seems to be exclusively movies that throw it off. Does anyone have any suggestions on how to fix this problem?

    In the few years I have owned Macs I have taken them apart, put them back together, wiped and reinstalled the software, done extensive troubleshooting on the hardware, and yet one of the only things I haven't done is clean the lens of the optical drive. How stupid of me. Well, I would certainly be willing to give it a try. Any suggestions on how to go about doing this? Thanks.

  • DVD won't read DVD; will spit it out

    When I insert a DVD into the drive, it tries to read it, then spits it out. Thought that F12 key was stuck, but wasn't. I have a DVD +/-RW drive so it should work. I restarted the computer, and it worked. But next day, put in a different DVD, and it wouldn't read it. Then I tried the same disc from the day before, and that wouldn't work.
    Help please.

    First, welcome to the discussions.
    I had this issue many moons ago, I found that following some of the recommended steps here fixed the problem.
    Most note worthy, Repair Permissions, run Macjanitor, Cache Out X, and Onyx once a week need to or not. This will keep all of the clutter out from burning CD's and DVD's.
    http://discussions.apple.com/thread.jspa?messageID=607640&#607640
    Cheers Don

  • Dvd won't read snow leopard

    I finally decided up upgrade to Snow Leopard; when I put in the disk, nothing happened, and the disk got kicked back out.  Suggestions?

    Is your optical drive able to read other disks - movie DVDs, music CDs, burned data? If so you may have a faulty Snow Leopard disk. If all disks are failing, however, it is likely a problem with the drive itself, which will need service.
    Best of luck.

  • DVD drive won't read disks at boot

    I have a Paviliton DV6-2113sa running Win7 HP  64bit. 
    I removed Acronis True Image and when I rebooted I got a BSOD at the point when the coloured balls should merge into one.
    I thought OK, put the system repair disk into the DVD drive and boot up, but the drive is failing to read any recovery dosks. I think the drive has packed up as I haven't used it for some time.
    Can I use any replacement drive in this model or must I get the same one again?
    The drive light flickers as though it is reading data but it doesn't 'spool up' to speed and I don't get the 'press any key to load from DVD'.
    The BSODs are a seperate issue which I think running a system repair will fix but I can't as the drive won't read data.
    Is it possible to put the repair disk files onto a 4gb USB stick and if so, how do I do it?
    Thanks.

    Hi Peeps
    I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
    Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
    But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
    Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
    Macbook 2Ghz, 512Mb, 60Gb, Superdrive   Mac OS X (10.4.7)  

  • CD/DVD drive won't read any CDs or DVDs

    Whenever I insert a DVD, CD, or CD-ROM my computer won't read the disc. The computer starts making noise like it is reading the disc but then it stops. It tries 3 times (starts and stops) and then just spits the disc out. I can't watch movies, install software, etc. How do I fix this.

    Before taking it or sending it anywhere I'd first try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238

  • Drive won't read any dvd ejects it automatically

    My drive Won't read any kind of DVDs, it keeps ejecting automatically after spinning for a while. it's been going on for a while now. please help!!!!!

    You can try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    and PRAM How to Reset NVRAM on your Mac - Apple Support
    If that doesn't help you can try a cleaning disc or a quick shot of canned air. It's likely though that your drive has failed, it' not all that uncommon. It that is the case you can either replace it or have it replaced but it's far cheaper just to buy a usb external drive....just not Apples because it won't work with macs with a built in drive working or not. .

  • Pavilion DV4-2161nr CD/DVD drive won't read or burn

    I recently had my Hard Drive changed in my HP and the CD/DVD drive was working fine...then about a month ago the door won't open and it stopped reading every cd/dvd i put in...it won't read blanks or movies or audio cds/dvds...I also have a yellow question marke by PCI Device...CAN SOMEONE PLEASE HELP ME?

    do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Hp pavilion cd/DVD drive won't read discs

    My pavilion G6 G6 2295sa won't read cd/DVD but will play DVDs with cyber link I have gone through the suggested routes when I put in the error code E:\hp DVD-RAM UJ8D1 H.01 please help.

    Hi Primhak,
    Welcome to the HP Forums! I need to clarify a couple of things the optical drive (CD/DVD drive) is playing DVDs but won't CDs is that correct? What is this error code that you are talking about? What operating system are you running?
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-o​perating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • MacBook CD/DVD drive won't read disc

    I have a Apple MacBook MC207LL. I have run into a major problem. My CD/DVD drive won't recogonize a disc when it's inserted (I have to force eject it). Disk utility shows that there is a disc present in the CD/DVD drive.
    My major issue is that I erased my partition so I can have a clean install of my laptop. Now I can't reinstall the OS because it won't read the disc or a USB.
    Is there a way to use Terminal to force it to read my data on the disc?
    Otherwise I am stuck with an empty computer that I will never be able to use I have done research on this and nobody has run into this exact problem as me. If someone can take their time to help me out that would be greatly appreciated.

    I am having the same problem, but now mine wont even notice that the disc is there! I wouldsay take it to the genius bar.

  • HT1338 DVD drive won't read or burn

    DVD drive won't read after upgrade to mountain lion install

    do you have the win 7 cd handy, try to boot into the discs and see whether that works, this will tell you whether that is software or hardware problem. Such failures do occur, due to ageing of laser. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • DVR-K17 DVD drive won't read installation disks

    Hi ,
    My DVD drive will read music, data dvd's but will not read any installation disks
    Have tried finding firmware update - but it does not seem to exist
    Compaq Presario
    V6508AU
    Win 7 64 bit
    was hoping the fresh install would fix the problem (came from Vista 32 bit)
    but it didn't
    any suggestions appreciated
    Vix

    Total WAG:  are your home-made data DVDs finalized?  I think just about everything these days can handle mulit-session CDs, but IIRC there are some configurations that won't recognize multi-session DVDs.
    Like I said, just a WAG.
    Z.
    Message Edited by zoltanthegypsy on 04-19-2009 05:05 PM
    Message Edited by zoltanthegypsy on 04-20-2009 09:52 AM
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • DVD Drive Won't Read "Homemade" Data Discs

    Hello! I just purchased a T500 with a regular old DVD burner (Optiarc DVD RW AD-7910S) and am having an issue with it. The problem is that it will read certain DVDs just fine (a Visual Studio DVD, for instance, worked just fine. As did a Vista Ultimate DVD). Unfortunately, other discs are not so fortunate. Anything that contains just plain old data files (such as a disc of log files, a disc with video files, etc) won't load at all. The drive will spin up, spin down, make a floppy disk reading clunking sound, and repeat the procedure.
    So it seems that anything that comes from an ISO or an "official" source (Microsoft) works fine, but any time a disc was burned with Nero or the Windows burning thing(tm) it won't read at all. This doesn't apply to CDs, however, which seem to be working just fine.
    Is this an easily fixable problem? Could it be a problem with the hardware? It doesn't seem like that would only stop it from reading data discs, but I'm no expert. I updated the firmware to the latest version available on the download site (actually I did that before trying any data discs, so I don't know if it was an issue with the old firmware). Is it possible that it didn't update properly or something? Would it be worth trying (or possible) to redo the firmware update or to revert to the old version to test? Forgive me if I'm sounding ignorant here.
    Thanks for any insights!
    P.S. I'm using Windows Vista Ultimate 64-bit, if that makes any difference to anything.

    Total WAG:  are your home-made data DVDs finalized?  I think just about everything these days can handle mulit-session CDs, but IIRC there are some configurations that won't recognize multi-session DVDs.
    Like I said, just a WAG.
    Z.
    Message Edited by zoltanthegypsy on 04-19-2009 05:05 PM
    Message Edited by zoltanthegypsy on 04-20-2009 09:52 AM
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for