DVDPro3- "Device Not Supported for requested burn operation"

Hello All,
In build and format I get "device not supported for requested burn operation."
On my iMac G4
Using DVD Pro 3.0.2
Mac OSX 10.3.9
And a LaCie Superwriter external burner.
Thanks for any suggestions,
Al

in case anyone else has a similar problem... SOLUTIONS:
formating to hard disc as an .img and then burning with toast works.
Also I found downloading and installing the device profile patches from www.patchburn.de got the burner to be recognised by both DVDSP and Disc Utility. Lot's of people recommend this source.
Another tip was to zap the PRAM but that did nothing. Nor did deleting the preferences file.
No idea why things stopped working in the first place but hope this helps others.

Similar Messages

Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad. Why is this iphone "not qualified for icloud"?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

External Inland DVD Burner not supported for disc burning?

Hello all,
I have a G4 tower running OS 10.2.8. It is used for a recording studio and is in great working condition. I recently purchased an Inland external usb burner model op-2488x which says is compatible with mac os10.2 or higher. The drive is recognized by the computer and it reads dvds as well as cds but when i insert a blank dvd or cd to burn it will not allow me to open in the finder because it says "drive is not supported" I spoke with the tech support at inland and they told me that since the computer recognizes it that its not an issue with the burner itself and that it is something wrong with my os software. He said that there were no drivers and to check my system settings. Any advise would be a great help, thanks!

Hi msg, and a warm welcome to the forums!
Might try PatchBurn...
http://www.patchburn.de/

HT201442 device not eligible for requested build

I tried to update wirelessly and it went into recovery mode. I found two gs.apple.com entries when I go into terminal: sudo nano /private/etc/hosts. Is that because I have had two iPhones? Would deleting one help? They also already have # symbol at start but no 'space' IE: #17.151.36.30 gs.apple.com
One entry has different digits like the apple example, the second has two 0s eg: #354.0.0.1
Thanks in advance for your time

The only reason for that entry to be in your host file to begin with is if the computer was used to jailbreak or attempt to jailbreak an iOS device.
Try doing the update with a "clean" computer.

IPhone 4 will not charge using apple charger displays this device not supported for charging

The iphone will connect to iTunes but will not charge with the charger or computer. It has been reset, and that didn't help.

Hey endifrommiami,
Check out the website link on my profile and then navigate to the products section of the site, there are solutions to fixing your specific charging iPhone problem there.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Fonefixer.

Can't burn bootable DVD. Err: Device not supporting this operation

I'm trying to create bootable DVD of Lion. The following error message pops up after clicking "Burn" under "Disk utylity":
"Unable to burn "InstallESD.dmg" (The disc drive doesn't support the requested burn operation)".
Can anyone help?????
More background:
1. Running clean&fresh install of Lion
2. MacBookPro i7 early spring 2011
3. DVD drives's spec:
                    MATSHITA DVD-R   UJ-898:
                      Firmware Revision:          HE13
                      Interconnect:          ATAPI
                      Burn Support:          Yes (Apple Shipping Drive)
                      Cache:          1024 KB
                      Reads DVD:          Yes
                      CD-Write:          -R, -RW
                      DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
                      Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
4. Media type (DVD) which I'm intending to burn it to: TDK +R, 16x, 4.7 GB
                      Media:
                 Type:          DVD+R
                 ID:          CMC MAG M01
                 Blank:          Yes
                 Erasable:          No
                 Overwritable:          Yes
                 Appendable:          Yes
                 Write Speeds:          2.4x, 4x, 8x
5. I was able to burn a DVD (to exactly the same DVD type) when doing the burn from under iPhoto and when launching the burn function in Finder ("right click" and select "Burn xxxx file to disc..."
6. BUT I am getting the above mentioned error message when attempting to burn the bootable DVD from under Disk Utilities. I'm following the steps recommended on various forums explaining how to make the bootable DVD drive. Briefly:
               a. placed InstallESD.dmg on my desktop
               b. launched Disk Utility. Verified (checksummed) the InstallESD.dmg file
               c. Press the Burn button
               d. The error message pops up.....
                    (The same happens with x8[max speed], x4, x2.4)

Thanks for the prompt reply. What you say is correct - the installer deleted itself after the instalation.
I then downloaded Lion again (another 8 hrs went by) from AppStore (using the "trick" with pressing "Option" button which changed "Installed" status into "Install" button) and therefore I DO have the Lion instalation content (including the mentioned .dmg file) on my computer ready for burning. (BTW, I've managed to burn a DVD with it from "Finder's" menu. I guess though, that such DVD will not work as the bootable one. Am I correct on it?
So, the status is that I have Lion's "InstallESD.dmg" file visible in the left side of Disk Utility window - the "Burner" (in Disk Utility) just doesn't want to start burning a dvd with this file. I need some suggestions on resolving it. Thank you in advance!

Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

Hi,
I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
I have to azure accounts and this is only happening in one of them.
I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
Regards
Christian
ChristianLLoyd

Hi Christian,
The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
http://azure.microsoft.com/en-us/support/options/
You can check the following links for similar issues.
The operation is not supported for your subscription offer type
Could not submit the request to create database
DBNAME. The operation is not supported for your subscription offer type
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

MP navigator ex the scanner driver for this device is not supported for my itunes/ ipod

Mp navigator ex driver for this device not supported when I plug in my ipod I have windows vista

Hello there K_McCreedy,
I saw your post about the scanning issues you have been having with your PS B110a and Mavericks. I have looked into this for you and I would like to offer some suggestions.
First of all, there is no downloadable full feature driver and software (scanning software included) for this model of printer and Mavericks. There are some work around options however, that I will link you to below!
Please follow these steps:
1. Mac OS X: How to reset the printing system
2. Repair disk permissions
3. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
(See under link #3 for the different methods of scanning options with Mavericks under the FAQ's section)
I hope I helped answer your question!
Thanks for posting in the community and have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

The requested action is not supported for this object. [message 131-171]

Hi,
One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
"The requested action is not supported for this object. [message 131-171]"
Any ideas what could be the problem?
Regards,
Mohan

Hi Johnson,
I have not tried your suggestion till now as I am waiting for the database copy from my client.
Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
The report prints fine if it has single invoice even if it is a check payment.
Will your suggestions address this as well?
Regards,
Mohan

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Query Problem - Exclude operation is not supported for this characteristic

Hello all
I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this.
We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit.
When we are in the report and try and drag out some profit centres or exclude some) it will not allow it and we get the following message: -
'Exclude operation is not supported for this characteristic'
Does anyone know why this is happening. I
Any ideas?

Hi Andrew,
if you have a chance confirm this with SAP Support, but I think excluding hierarchy nodes is not supported. The reason for this is the fact that it is not quite clear what should happen to the hierarchy structure when nodes are excluded. For example, what should happen to the value of the parent? Should it still contain the value of the excluded node under it?! or not?! One might want it one way, others might find the other more convenient.
Hope this helps.
Regards,
Maxim

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

Requested extension com.adobe.Vibration is not supported for Windows-x86 Problem with Cs6,air3.4.

While compiling my application on Flash CS6 with Air for iOS 3.4, I am getting the error given below:
The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.adobe.Vibration is not supported for Windows-x86.
I am using vibration.ane file which got it from Adobe (http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html)
Anybody out there who knows how to solve this problem!
Thanks.

1) The vibration ANE from Adobe does not support Windows.
2) The iOS simulator (adl) is not a virtual machine but rather it is a native Windows app, thus the platform your app runs on is Windows not iOS.
What Adobe needs to do to avoid confusing everyone is one of two things:
1) Include a stub for Windows (and MacOS) in the Vibration ANE.
2) Make it possible to deploy an app to a platform where the ANE is not supported, but produce a runtime error upon an attempt to use the ANE. The developer could then put logic in the app to detect the underlying platform and make adjustments.

DVDPro3- "Device Not Supported for requested burn operation"

Similar Messages

Maybe you are looking for