DVDs keep ejecting and won't play

When I try to insert some dvds, but not all of them, they just pop back out and will not play in the dvd player on my 2008 Macbook Pro. How can I fix this? Is this a dvd problem or a computer problem??? I am baffled and would really love to fix this ASAP!

Hi Linky
Welcome to apple discussions. All of our macs are Power Macs. I sometimes use an apple G4 laptop which belongs to my wife (or rather school site).
Suggestion: you may also wish to post this same question to a category specific apple forum that addresses hardware and / or firmware issues for your specific mac model (namely Mac Book Pro Forum => Optical Drives and your MacBook Pro.
http://discussions.apple.com/forum.jspa?forumID=1298&start=0
Experience has shown me that what works fine for one may have little to no effect for the other. This holds true not only for desktops models vs. laptops but also for varied types of media. Date of manufacture, firmware + software + the date your mac actually rolled off the assembly line also play a significant role for your own apple computer.
These same dvds play fine on my daughters ibook so there is not a problem with the disc itself
The above statement is true but nevertheless I wouldn't rule out media compatibility issues just yet.
Lastly, try running apple's software updater if you haven't yet done so. Remember to repair permissions before and after doing so.
Message was edited by: SDMacuser

Similar Messages

  • After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.

    After the update iTunes keeps crashing and won't play any of my music and keeps restarting my phone.
    Anyone else have this problem and resolved it?
    Thank you!

    Well, I hadn't rebooted after the 7.1.1 upgrade, but obviously I had to restart iTunes. After I rebooted my iBook iTunes worked... Maybe the 7.1.1 update should be marked with a must reboot?

  • All DVD's inserted, self eject and don't play, why?

    When I try to insert a blank or recorded DVD in my iMac it self ejects and won't play, is there a problem with settings or does anyone know how to fix it?

    Another help source (if you haven't already done so).
    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand.  Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448  How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs.

  • Dvd keeps ejecting but plays cd's fine?

    Hi,
    My DVD's keep ejecting but i can play CD's?
    any ideas!
    Harry

    A lot depends on the quality of the disk, and if the disk or the drive is dirty.  See my FAQ*.

  • My iPhone keeps playing same song and won't play next one

    My new IPhone 4 keeps playing the same song and won't play the next one! I have reinstalled the software and reset it, but still no luck.

    See Page 77 of the User's Guide.  Make sure you do not have it set to repeat that specific song.

  • After burning DVD, menus work on DVD player but assets won't play

    When I click on the "play movie" button the dvd freezes and won't play. But it works just fine in the simulator. Please help ASAP

    You realize there's almost nothing we can do for you, don't you? Authoring a DVD is not trivial and we were not watching to know what you did or did not do in what can be a tricky set of procedures.
    You can start by telling us what your source media is, how you built your menus, the level of complexity of your project, how many other DVDs you've successfully completed. Stuff like that.
    bogiesan

  • Ipod songs showing up grey and won't play

    I have recently added some cd's on to iTunes. The songs show up normal in my itunes library and will play, but then when I go to them on my iPod library they show up grey and have a sync sign next to them. Most of them don't even show up on my ipod, but some do and they are just grey and won't play. I have tried re-downloading the cd's, right clicking on the songs, and pretty much anything I can think of. How do I fix this?

    Couple questions for you.
    Are you using the Wi-Fi sync feature?
    Are you on the latest firmware?
    What I would try doing is, if your using the Wi-Fi sync feature turn that off and sync with the cable that was provided with the iPod. 
    If you are already doing that I would try going into settings > general > reset all settings
    if that doesnt work, then the last thing I would try is restoring your iPod to factory after backing everything up and trying to sync once more. 
    Let me know if this helps you out at all!
    While I am an Autotech at Best Buy, my posts are my own and are not those of Best Buy in anyway. If you have any questions feel free to give your local best buy a call and ask to speak to an Autotech.

  • Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

    Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

    Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player.  It may supply the codec it needs.
    Not sure why you wouldn't be able to play straight avi files though in quicktime.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

    After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

    After the 6.1 update, my phone keeps restarting and won't stop. how do i fix it?

  • When I manually add songs to iphone 4s many appear gray and won't play. How do I fix this?

    When I manually add songs to iphone 4s many appear gray and won't play. How do I fix this? I have the manually manage music button checked, and I can play them on itunes, but on my iphone they appear gray and won't play.  There doesn't seem to be any reason, as one song from an album will play, but the other 9 won't....

    Click here and follow the instructions.
    (66255)

  • Why do many of my song I have imported into iTunes have slats by them and won't play because they can't be found?

    why do many of my song I have imported into iTunes have slats by them and won't play because they can't be found?

    Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

  • Video thumbs became icons and won't play in preview of Bridge

    I started a new project in Premiere Pro 6.  I'm not sure if it is relevant, but one thing I did differently on a new project was change the DV to HDV, the only time I've done that.
    Then when I was importing by dragging from CS6 Bridge a bunch of videos, it looked like they were disappearing, or being moved instead of copied, so I terminated and started over.  But after that some thumbnails switched icons and won't play in CS6 preview, though they do when clicked to open in media player.
    I think when I finished the video and was starting to export, that a window came up and said dynamic link fail or something.  I'd never seen before. Back in CS6, I went to a backup disk and copied the video files that here had thumbs, and copied to the folder with the icons.  They had the same number code, but had text in front on the originals.  Once I compared to make sure all thumbs and icons were represented, I deleted the icons, and then renamed the thumbs according to my current naming system, so they were just like the replaced ones.
    I had exported to queue, and now ran the queue.  I got the dynamic link error again, and when I looked back in CS6, the replaced thumbs had become icons like before.  Since I still had the window with the other backup disk open, I copied those.  But this time, even though they lacked the text in front of them, they arrived as icons instead of thumbs also. I thinkperhaps it is because PP can recognize that they are the same files even though they have different name.  Because when I have changed the names of files that are already in a video sequence, and PP asks where the file is, and I indicate the file, it accepts it with the new name, though the old one still shows in the sequence, and doesn't need to be redone when reopened. 
    The icons, when in PP do play as normal and the export went normally.  But  the icons won't play in the Bridge preview, and now it seems I can't get back thumbs at all.

    Have you tried the Bridge forum?
    Bridge General Discussion

  • When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

    When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

    Did you try a reset?
    Restore?

Maybe you are looking for

  • Approval for Vendor Invoice

    My client required Approval for Vendor Invoice Payment from senior person. How can i configured this scenario in sap AP?   Pls Reply

  • Remove the extra email

    Problem: I have 2 mail and {name @ me . com} {name @ yandex . ru} I stopped using {name @ yandex . ru}, how to remove it from the profile?

  • FCP keeps crashing when loading thumbnails from bin

    Hey folks, I am having constant issues where FCP keeps crashing when I load a bin with thumbnails. This doesn't happen every time I open a bin, but after I open say 6 or 7 bins. After the research I have done I have come to a couple of possible solut

  • Error: could not open...........

    Particulars: New to Java, Windows 98, Java 1.4.0_01. My first program has compiled no-problem. However, when i attempt to run the program i get the following messege in the command prompt. Error: could not open 'C:\Program Files\Java\j2re1.4.0_01\lib

  • Installing flash player msi on Azure Worker Role VM

    Hi, Trying to install the flash msi on Azure Wroker role. Tried the following C# code: Type type = Type.GetTypeFromProgID("WindowsInstaller.Installer"); Installer installer = (Installer)Activator.CreateInstance(type); installer.UILevel = MsiUILevel.m