DVDs look horrible on Apple Cinema Displays

I compress my HD video using Compressor or Adobe Media Encoder, using Compressor's 'Best Quality 90 min' settings. Then burn to a single layer disc through DVD SP. It looks fine on an SD CRT monitor, but when playing back on an Apple 23" Cinema Display, it looks like it's been digitally uprezzed - basically it looks horrible.
However, when purchasing an SD DVD from the store, it plays back beautifully on the Apple displays.
I don't think it's the compression settings. Could it be that I'm burning & duplicatin instead of stamping & replicating? I'm getting lost with this.
Any thoughts?
Thanks!
Kenny Miracle
Mac Pro 8-Core, 12 GB Ram, ATI Radeon HD 4870
Final Cut Studio 3

I find the best way is to export as a self-contained movie to a codec such as ProRes (do not use things like HDV) then bring that into Compressor. In Compressor make it a SD m2v as suggested. Though frame controls add time, it is not too painful when using Better (not Best) settings, especially for resizing. The difference between Better and Best is not worth the trade off most of the time in terms of the length of time needed to encode.
Set up virtual clusters to help with time to encode. Also make your own preset and/or make sure to tweak the Apple presets. If using the 90 Minute preset, for example, it is two pass @ 6.2. If you have an hour worth of material, for example, you can go higher. Sometimes the incremental difference may not be seen, but for an hour you can go up more to where it is noticable. YOu could even try a high CBR rate. Take a look at the links below.
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php

Similar Messages

Can I use an Apple Cinema Display as a second monitor for my iMac?

I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?

Just had a good look inside my box and nothing. Maybe it's a Apple UK thing
The back of my iMac does have a Mini DVI port so I'm gonna pop down the Apple store tomorrow morning to pick one up.
Thanks for the advice, I'll let you know if I'm successful.
Message was edited by: genpro

Can I use a 30" Apple Cinema display with a new 27" iMac?

I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA. I will soon be upgrading it to Mavericks, if that makes a difference. My understanding is that the resolution on it is 2560 x 1440.
I'm looking at buying a used 30" Apple Cinema display. I'd like to use it with my new iMac. The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great. I just want a larger screen.
I called Apple support, and the tech rep wasn't sure it would work. He seemed to think that the 30" Cinema displays were made with different connections. Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
Can anyone tell me if this would work? Would my new iMac and its video card support the 30" Cinema display? Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)? Any advice is appreciated.
I don't yet know many of the specifics of the 30" Cinema display I'm considering. I know it is about 3 years old. And here is a picture of the back of it:

Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
Regards.

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

Where can I buy a Brand New Apple Cinema Display 30"?

Hi,
I Already posted my question in the older Display topic, but I'm not sure it was the good place, so I post it here. If it's not the good place, you can move my thread to the good topic. Thanks.
I'm looking for mounths to buy a brand new 30" Apple Cinema Display. I went to some Apple reseller/Apple Stores and each of them didn't really knew where I could buy it since it's discontinued. I can't believe there is no brand new 30" Apple Cinema Display lying around in some Apple Stores/Apple general center at Toronto or anywhere in USA.
I really want one of them, and I'm ready to make anything to get one (phone call etc). I would like to get some help of where I can call or where I can go to get what I want. The price doesn't really matter now.
Thanks!

Have you done google searches for it ("Apple 30" cinema display")? That's all I can recommend.
A quick google search turned up this page which apparently lists some new 30"s.
Note, I did not follow those links to see if "new" really meant "new".

How Can I Test New Apple Cinema Display?

My new 30" Apple Cinema Display arrived today but the arrival of my MacBook Pro is still 4 weeks out (I ordered both at the same time for dual warranty purposes). I cannot hook this ACD to my wife's 12" PB and the only other computer that may have the ability is my daughter's new iMac Intel Core Duo (but I'm not sure if it will power the 30" ACD). I would like to test for stuck or dead pixels. Can I plug the AC cord into an outlet and no video connection then power on or will this show no pixel anomolies, or worse, cause potential harm to my display? Anyone? Thanks to all that may reply.
PS: I threatened to cancel my order unless the Supervisor allowed me time to evaluate the new monitor the full 2 weeks AFTER the arrival of my MacBook Pro, so I have plenty of time, just no computer to run the darn thing!
PowerBook G4 12" aluminum & iMac Intel Core Duo Mac OS X (10.4.5) Apple 30" Cinema Display w/ iLift LCD monitor arm

I think pretty much any Mac with DVI will drive the 30" ACD, just not at the native resolution. You will get 1280x800. But if you are just looking at a solid full screen of a single color, for the purpose of trying to spot dead/stuck pixles, the low res shouldn't make any difference at all for such purposes.

Is an Apple Cinema Display (ca 2005) Compatible with Mac Mini?

I have a 2005 Power Mac Dual G5/2.3 I took off-line last year. It used an Apple Cinema Display 20" that has it's own power supply "brick" and a cord with the monitor connection, a USB connection, and a FireWire connection. Is this display compatible with the latest Mac Mini? Thank you for any advice you may have.

That's correct, the link perfectly describes the Apple 20" Cinema Display I have. With the new Mac Minis requiring an HDMI cable to link to a display, the HDMI to DVI (female) adapter looks like the one I need. I found this on Amazon: http://www.amazon.com/Gino-Black-Female-Converter-Adapter/dp/B006Z8N60C/ref=sr_1 _18?s=electronics&ie=UTF8&qid=1371158207&sr=1-18&keywords=hdmi+to+dvi+adapter+ca ble
This adapter is an all-in-one plug with no cable linking the HDMI to the DVI ends. It looks like it might be too wide to plug in anything immediately adjacent to the HDMI socket on the Mac Mini due to the width of the adapter when the adapter is plugged in. However, I could get around this by purchasing an extension cable with HDMI male on one end and the HDMI female on the other if I had to.
However, one of the comments said that the DVI is video-only and that another cable is required for audio. Can I assume that plugging in either or both of the other connections (a USB and a FireWire) coming out of the 20" display will take care of audio?
That leads to another answer, but I'm confident that I'm almost there thanks to your help. Close enough to mark this as "solved". Thank you! Let me know if you have any further thoughts with regard to the audio though.

Help with cleaning off a 23" Apple Cinema display HD

Ok guys, I work with LCD's for a living, but mine are a bit different than the Apple monitors (plus, this is my dime, not my companies..). So, I come home to find out our "house guest"'s kid was flinging gogurt all over the place. I look at my LCD's and sure enough, both have someone oily on them.
I cleaned the dell with no issues, but my 23" Apple Cinema Display HD, has a couple of marks that won't come off (I used water and a micro fiber cloth to clean it). It's like two little oily spots about the size of the tip of a finger, and one little line in the bottom right corner.
At work, normally we would use denatured alcohol to clean the LCD surface, but I'm quite familiar with the LCD's at work, and what is attached to the polarizer. My Apple display, I'm not so sure, so I don't want to use something on it that is going to damage the surface. Any recommendations? The areas that have the issue don't seem to have any display related problems.... They aren't finger clusters, and the polarizer doesn't look damaged.
thanks! And yes, the house guest was informed what this monitor costs to replace.... and I threatened to chop off fingers (kidding).

Apple say not to use alcohol or ammonia. Dilute some hand dishwashing liquid. Moisten a facial tissue with it, and rub gently. Then use several facial tissues moistened with just water to remove the detergent residue.

Mini VGA to VGA to Apple Cinema Display

i just acquired an old imac g4/800. it has the mini vga port. i've seen the adapter to go from mini vga to vga but i'd like to purchase a 23" apple cinema display. do i need another adapter linked to the mini vga adapter that would connect a cinema display to the imac g4? i'm not worried about adding extra desktop space, only using the new display with the current setup. please advise

Apple's current 23" Cinema HD Display uses the DVI connection rather the ADC connection. The original 23" Cinema Display has an ADC but was discontinued in 2004. But then a VGA to DVI convertor is about the same cost as a VGA to ADC convertor. So I certainly agree with just buying a new display.
Remember the iMac G4 can only mirror the internal display on to the external if you have a 15" iMac G4 then that means you'll be outputting a 4:3 ratio XGA (1024x768) screen on to this nice large display which isn't going to look great. If you have a 17" iMac G4 then it's worth ensuring that the 23" display you do get is capable of the 1440 x 900 resolution. Personally I'd give serious consideration to the iMac 24" if you need the larger display as 23" display is 50% of the cost of the iMac.
mrtotes

Second Monitor with 2008 LED Apple Cinema Display?

Hi there I have an Eary 2011 15" MacBook Pro, with Thunderbolt.
Last night I purchased an immaculate 2008 LED Apple Cinema Display. It was just far too good a deal to turn down. The resolution is 1920 x 1200.
Prior to this I had (and still do have) a Dell Ultrasharp U2410 PremierColor, with attached sounbar.
I now have the Apple display set up and running and it is awesome looking (same resolution as my Dell, but with the backlit LED, it just looks pristine).
Is there a way I can set up the Mac so that both monitors are running, I know I can't daisy chain, and this Apple monitor is Mini Display port as opposed to Thunderbolt.
The Dell has two DVI ports, a VGA, a HDMI, a DisplayPort, and a set of Component and Composite connectors.
Which of these would be best to use and is it even possible?
Thanks in advance.
Tommy

Connect the Apple display to the Thunderbolt port and the Dell with a USB-to-DVI adapter like this:
http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
Note that because USB is slow, the Dell monitor will be less responsive than the ACD.

Calibrating Apple Cinema Display for Video Editing

What's the procedure to calibrate an Apple Cinema Display for editing in FCP (editing and preliminary color grading)?
My camcorder can produce color bars, but I can't hook it up directly to the monitor. Shall I record color bars and use the recorded clip to calibrate? What's the procedure regarding calibration?
Thanks!

The need to "calibrate" a display for video "editing" is a complete fallacy. There is no need to have accurate images when plopping pictures and graphics next to each other to create a story in a linear fashion. For accuracy you need a dedicated input/output device with a display that represents your intended delivery; projection, broadcast, whatever. If your intended delivery is web or phone only, well, it's a total rodeo where the word "consistency" has no meaning at all.
The MXO, it puts a look up table on a computer monitor and then does some other electronic mumbo jumbo to simulate interlacing and other tv junk. I call it lipstick on a pig, others here will give it high marks.
The only real constant is that if you want to play in the world of "hd", the costs are bigger than in "sd" and is the return on investment worth it?
z.

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

Where can I purchase a Logic Board for a 24" Apple Cinema Display?

My 24" Cinema Display started to flicker and black out shortly after I purchased my most recent MacBook Pro. Apple felt that the issue was the MacBook Pro so they replaced it. The problem continued so they suggested I take the Cinema Display to the Genius Bar. The display was out of warranty and the Apple Genius felt the issue was a bad display even after I told him I smelt silicon burning just before it went out completely. He said that he could "depot" the unit and have it repaired for ~$600. Due to the high cost of repair, I chose to purchase a new Thunderbolt Display instead. Recently, I opened the old Cinema Display and found that the Logic Board is fried. I have ordered a new board from 2 different Web retailers. Both accepted the purchase as "in stock" but then stated they could not get the board from Apple. Where can I purchase the Logic Board for a 24" Apple Cinema Display?
Many thanks!

I was very interested to read this document. I think there is a problem with the Cinema Display and that it is frying the computer.
My husband bought each of us a macbook pro. His was hooked up to the cinema display. After about a year, his MBP started to suffer intermittent failures where it would suddenly shut off and have to be hard rebooted. After 2 years, the power or logic board on his MBP completely failed. He bought a new MBP and a Thunderbolt display, and I inherited his Cinema Display for use with my original MBP.
After one month of use with the cinema display, my MBP started to have the same problems. It has to be hard rebooted almost every time I disconnect or reconnect with the cinema display. I went to the Genius bar, and they confirmed that my MBP logic board needs to be replaced; I'm just holding out until spring break to take it back in, as they say it may take a week. Fortunately, I have AppleCare for my MBP.
Our cinema display is 3-4 years old, but it looks like, even though it appears to be working, I should probably get rid of it. I can't keep frying computers!
I'm posting this because I'm wondering how many others are experiencing this problem.

Worth of 23" Apple Cinema Display?

Hello. I am looking to sell my 23" Apple Cinema Display. either on Craigs List or eBay. Can anyone help me figure out how to assess its worth? It's in perfect working order though I've had it for a few years. I appreciate any thoughts on the matter. Thank you.

Hi, I own two 23" Apple Cinema displays that I bought off of craigslist. I paid somewhere between $300-$400 each. To accurately guage how much they're going for, go to ebay and select the "advance" button. Then have the "completed listings" selected. Then enter what you're looking for, namely the Apple 23" Cinema Display and you'll have a listing of what people had purchased them for as opposed to hoping for. Good luck.

DVDs look horrible on Apple Cinema Displays

Similar Messages

Maybe you are looking for