DVDSP 4 crashes on new track

I am running Final Cut studio on my dual 2.0 G5. Just today DVDSP 4 started crashing everytime I try to create or edit a track. I have tried it in new projects and saved projects. I have trashed Prefs, repaired permissions, and updated my prebinding. Nothing.
Any ideas would be much appreciated.
thanks,

Right - there's definitely something dodgy going on here if the item description you just exported can't be re-imported. If I were you I would follow the instructions for removing DVDSP on the Apple KB, then re-install from scratch. This page has details for v2, but it will be the same for v4:
http://docs.info.apple.com/article.html?artnum=93452
Are none of the other apps in FCS affected? Any oddities with FCP, Compressor, Soundtrack, etc?

Similar Messages

PPro CC crashes when using Track Select tool

This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe Premiere Pro.exe
Application Version:    7.0.0.342
Application Timestamp:    5176598d
Fault Module Name:    ntdll.dll
Fault Module Version:    6.1.7601.17725
Fault Module Timestamp:    4ec4aa8e
Exception Code:    c0000005
Exception Offset:    0000000000052fc6
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    1ce0
Additional Information 2:    1ce04770b02f823ff20b7f82076eba51
Additional Information 3:    c192
Additional Information 4:    c19212ee5e1e8407cb093e848f6cb5d8
System specs:
Creative Suite CS6 subscription
Creative Cloud trial
Windows 7 x64, SP1
Nvidia Quadro 4000 GPU
i7-3039k CPU
32Gb of RAM
thank you

Yep, buggy project..
New project with same and different footage works fine
Other project created in CC works fine
Imported sequence from CS6 works fine
Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
Thank you for your replies!

DVDSP crashes on building

Hello, everyone~~
Simulator works fine.
When I try to build, DVDSP carshes after passing main menu.
I can't think of anything causing that.....
My Main menu is M2V and other menus are Tiff.
I don't think that's the problem.... then why does it crash.....
It crashes on same menu every time....
I'm swimming in the dark.. any answer will be helpful..
Thank you....

Mine 3.0.2 DVDSP Academic crashes right after "build".
The build goes fine, the log reads "done" ... 10 seconds later DVDSP crashes.
The VTS that is build proves defective if I try to use it.
This is on a project where DVDSP has a 2.3 gig track that gets broken into 3 parts in the VTS. I made the same project in a version composed of about 6 different tracks (all well under 1 gig) and that build and burn works fine.
I do have a few gaps in the audio tracks of a second or two between assets in that one large track. The manual implies this is OK.
Any ideas??
G5 Dual 2 gig Mac OS X (10.3.9)

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

Creating New Track

Newbie question - been trying to create more audio instrument tracks, but everything I do to try to separate them from the original (Instrument 4) track changes that original track as well. Both the manual and Sitter's book say to just hold the new track's name and from the pop-up menu, pick a new instrument from the list. The only problem with that is that the pop-up menu ONLY SHOWS ME THE INSTRUMENTS CURRENTLY IN USE BY THE OTHER FOUR TRACKS. It doesn't show me all 128 instruments and let me pick. When I try to change the intrument of the new track using the Channel selection in the Object Paramater box (which DOES list all 128 instruments) it also changes the instrument in the original channel. So both the new and the old channel remain totally linked and anything I do in the new channe (volume, pan, etc.) is mirrored in the old channel.
How do I de-link a new channel from an old one? (Seems like a dumb default to assume the new channel takes on the instrument as the predecessor instead of just picking the next). And yes, I've also tried creating a new one by double-clicking the first empty slot at the bottom of the Arrange window and by selecting 'Track' - 'Create with Next Instrument'. No difference - still creates using the last instrument and only shows me the instruments in use when I try to pick a new one. Help?

this is the second post today on this question.
use create track with next instrument.
or create multiple if creating more than one new track.
also ... search previous question on the subject.
also ... combine manual with sitter's stuff. It's great. I love those videos. but you still gotta read the manual.
Best of luck
Dee

Creating new tracks (any kind)

I´m getting a bit frustrated here now. I can not find a simple quick way of creating a new track (object) in the arrane window. I know Logic is a very customizable DAW, but I would like an easier way. Like control clicking in the tracklist and then choose track/object type. I´m still a novice here, and I may have missed something important and obvious, but if you have to go into the environment everytime, or create templates, it´s too much. When Steinberg and MOTU have done it, why not Logic? It should be right up there! Maybe it is, and I´ve missed it. Can´t find it in the manual, though. Any of you seasoned users got a tip? I´ll be happy to eat some humble pie if I can stand corrected here

Hi
That was quick :o)
Ok:
If I have an instrument track with Stylus RMX on it, then try to use the mentioned procedure, what happens, is I get a copy of the RMX track. If I then remove RMX on the copy, it also disapears on the "original". And I didn´t want an instrument but an audio track. Where do I go wrong? I can´t find it in the manual.
I work with a lot of different projects and with different DAWs, Nuendo, Samplitude, DP5, Pyramix, Live, Acid, and they all have their strengths and weaknesses.

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

Problem while creating a new track

Hi,
When we create a new track, we get the following exception:
Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException: com.tssap.dtr.client.lib.cms.DTR.connect(Ljava/lang/String;Lcom/tssap/dtr/client/lib/protocol/ISessionContext;)V
We have created a new product and a software component and defined the dependencies for the software component (SAP_BUILDT, SAP_JTECHS & SAP-JEE). In the CMS, we have done Update CMS. We are able to see the software component and have added the same in the 'Software Components for Development'. All the usage dependencies are clearly visible.
When we save the track, we get the above exception. Can any one of you please respond this query?
Thanks in advance.
Regards,
Ravi

Hi Ravi,
We enocounted a similar problem once. For our situation it was a missing DTR url in the lanscape configurator. To check/fix this do the following:
1) login to CMS
2) click on the Landscape Configurator link
3) if not already selected, choose the track in the list of tracks on the left
4) click on the Track Data tab for the selected track
5) verify that the Design Time Repository URL is specified and correct (e.g. http://<server>:<port>/dtr
Save the configuration.
Hope this helps.

Glitch? track creating a new track...

ok, so lets say I have 3 tracks... and in my window, you can see both "tracks"' and "mixer"(with volume/pan/level)
when I push the big "+" to add a new track, it "collapses my tracks" ( as if I am pushcin the little arrow at the top right by "tracks") - now the mixer is no longer visible for each track...
so then, I push the arrow again, and each of the tracks fall down into their place, as they should, but only like part of the gray box for each track (like where it says new track) is visible... I have to roll my mouse over the box for the rest of it to show up.. does that make sense.. it seems like some sort of graphic glitch- it is the latest version of GB.. I don't get it... on top of all this, my mixers have dissapeared again too, so I have to push the arrow again..
in short, every time I create a new track, I have to click the arrow, then roll my mouse over the gray boxes for me to able to see them, then click the arrow again so the mixer pops back out.. its strange..
I am new to GB, but want to know if this has happened to others, or if anyone knows how to fix it.. its annoying!
thanks
in short, after I

I really appreciate that. I went through every setting I could think of and didn't "check" or uncheck the obvious. Lifesaver.

Bouncing down to new track - mono!!

Hi - I'm using CS5.5 for Mac and I want to be able to bounce edited, joined, multi-clips to new tracks in mono. The original tracks are all mono - but the bouncing function always produces a new track in stereo. Is there a setting somewhere that I've missed (I have looked exhaustively).
As a workaround I have to use the 'convert sample' function in Edit view to create a mono track from the newly bounced stereo track and then add it back in to Multitrack view. This is extremely tedious in a complicated editing project.
Anyone else come across this?
Cheers
CrispJB

myscreennameis:RobbieS wrote:
ignor SteveG, does not understand the question.
Understand the question perfectly - there isn't an answer because, as you have observed, the function isn't there at present.
I'm thinking I might as well just uninstall CS6 because to many featues from CS3 were removed in CS6 and I find it user UNFRIENDLY.
No features from Audition 3 (not CS3) were removed in CS6 (only it was actually CS5.5) - they simply weren't implemented in a complete rewrite from the ground up. Not all features were re-implemented, simply because there wasn't sufficient time to implement them all before the externally-imposed deadline arrived. Some, but not all, have been added back in successive iterations. Yes, it's pretty much by popularity I think, although some things will likely never return, as they've been superseded by newer implementations. A typical example of this would be Scripting.
What I pointed out (several years ago), possibly too subtly, was that there are alternative ways of achieving a mono bounce, and it's one of those that you have to use. I have no idea if the original 'bounce to mono' will be implemented - if you want it back, you'll have to submit a feature request.
Audition Feature Requests

Problem in creating a new track

Hi,
I am trying to create a new track in NWDi like this
1.created a product,sofware unit and software component and defined the dependencies(required components like BUILDT,JTECHS etc)
2.Went to landscape configurator and clicked on track data and enter the track name and add the sc created .
3.After adding the sc created required components came automatically in the track data screen.
4.i saved the track data then it says track is created
5.I went to NWDS and trying to import that track.
6.i can see all the components in that track but inside each component like BUILDT i dont see any sda files(external libraries or jar files) they are just empty.
Did i miss any step here in creating the track
please help me in resolving this issue
Bala

I followed the same steps as mentioned below
1. you are running JDI on SPS12
2. you have defined your software component "mycomp" at the SLD
3. you have declared the three SCs BUILDT, JTECHS, JEE as
dependent SCs for "mycomp" at the SLD
4. after these you did an "update CMS" at the "domain data" configuration
5. you created your track and choose for your SCs "mycomp" as software component.
and now:
6. When i added the developed component it brought all the required (JTECHS,BUILDT,JEE)components in the Landscape configurator. You already defined the usage of these SCs
in the SLD at step 3.
In older Versions of the JDI (e.g. SPS10) you saw after the choice
of "mycomp" inside the track data also the dependent SCs. This is
not the case any more in SPS13.
Summary: only define your dependent SCs at the SLD, update CMS,
remove the definition from you track directly and try again.
But the problem is when i go to Transport Studio and checked in in check-in tab and after went to development tab and imported and after sometime it is saying import failed.And when i go to NWDS it is bringing all the scs in my trck but there are no libraries in my scs
I did observe a problem in CBS for this new track
when i go to CBS and select my track and look for DCs in JTECHS,JEE,BUILDT scs there are no DCS(0 dcs).
I think if i can resolve this i can create a new track without any problems
Please help me in resolving this issue

How to create a new track with existing changes in the production

Hi
I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requirement is to create a new track ( DEV, CONS, TEST and PROD) with DEV having all the existing changes we made. In short how do I import the SCA's from development track PROD to the new track DEV. We are on NW2004 SPS20.
points rewarded for helpful answers
Thanks
Sheril

Param
Have you done the import in DEV and CONS and then Assembled .. ?
If yes then go to /usr/sap/jtrans/CMS/archives/.......... -> check for the track name and then the last .SCA file in it . Copy that SCA file in the /usr/sap/jtrans/CMS/inbox and go to the new track and configure the checkin to inbox ... You should see the SCA in there ... check those in and you are ready to have those SCA in your Production track ..
If no then you need to know the NWDS functions .. I shall send you the details to bring the incomplete changes (not assembled) to new track .. let me know if the first one worked ..
Thanks
Rahul

Is it possible to have track and region parameters boxes under the inspector hidden by default when creating a new track?

I often need to access the effects section and/or select a different midi instrument and have to manual minimize these boxes. It would be nice if I could have these hidden by default as I'm accessing the portions covered by the track and region parameter boxes more frequently than I'm accessing the boxes themselves.
Thanks!

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Error message while creating new Track.

Hi,
I was unable to create new track in our NWDI systems, getting the following message. I checked authorizations and it looks fine to me.
CBS (URL http://<HOST>:<PORT>/tc.CBS.Appl/archiveapi2/) authorization exception: User not authorized to log into build server. ( Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<HOST>:<PORT>/CBSWebService/CBSHttpSOAP?style=rpc" )
Please help me to resolve this issue.
Thanks & Regards
Srinivas

Please see the fine documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/da/f812d366aa44ad83a30418b34dae1c/frameset.htm

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad. Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
Thanks.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

DVDSP 4 crashes on new track

Similar Messages

Maybe you are looking for