DVDSP reports wrong image size?
If I drop a DV-rez clip into DVDSP, then check that clips attributes in the Video Asset browser, it reports it as ~5.8Mb/s and 720x480. But if I drop an Uncompressed SD file into DVDSP - a clip which is recognized by both FCP and the Finder as being 720x486 and Uncompressed 8-bit SD NTSC - it too comes up as ~5.8Mb/s and 720x480. Which is completely wrong. Or am I crazy?
DVDSP 4.1.1.
Ray,
I think I understand what you are trying.
When you start with the image showing 6" rather than 8", I take it you are reading off the rulers on the left and top. Are you sure that there isn't a scroll bar on the right of the picture to move the image to show the bottom 2"? Try using Ctrl & 0 to fit the image to the window.
Do you work with images in floating windows?
The way I would get a 2" border at the bottom is to use Image - Resize Canvas Size and use relative changes.
Add the 2" height and make sure the anchor point is moved up.
Hope that might help
Brian
Similar Messages
-
LR 5 - Image Sizing Dimensions - wrong image size
Hi,
Image Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
Here a link to an image which exports at wrong size (export dimension set to 2048x1536px).
http://www.bobtronic.com/files/IMG_0289.JPG
I would appreciate a speedy fix for this problem. Thanks
cheers,
MatthiasThe image has a resolution of 3264x4928. Exporting using Dimension resizing of 2048x1536 results in an 2047x1536 image.
The scaling factor 4928 down to 2048, is 0.4155844155844156...
Assuming that LR is working to only 3 decimal places here, which indications discussed in another thread would suggest, then there are several ways to achieve that:
truncate down to 0.415 by discarding the subsequent digits
"quick-rounding" of the third digit by inspecting the fourth-place digit only, and incrementing the third-place digit when the fourth-place digit is larger than 5, which it is not in this case, resulting in 0.415
"math-rounding" by inspecting all of the following digit pairs in turn, until you reach a pair that is lower than 50, and then working back again to simplify. This procedure rounds 0.41558 up to 0.4156, then after doing that, rounds 0,4156 up to 0.416
Speculation: the difference between 0.415 and 0.416, is the difference between a result with 2047, and one with 2048, when executed.
Most of the time the "quick-round" procedure will work out fine, also truncating will usually be good enough, assuming the above has anything to do with the reality (which it may not). Just occasionally, though, there'll be an error in the final digit, compared with what the theoretically accurate procedure would have given. So if I am right this is not strictly speaking a bug (something failing to execute as it has been designed to do), but the result of a software design choice. "Works as designed", iow .
It seems that LR, perhaps differently between versions, is working this through by simple calculation (from the front-end), without comparing the back-end outcome against what you have requested. How much this (intermittent) issue actually matters, is a question of judgement, and of particular requirement.
[ alternative method: I find the Print module, outputting to JPG, is completely reliable when it comes to making a standardised JPG as to the dimensions, as well as offering some different technical and design options, than what you get with Export. For one thing, you get the option of on-the-fly cropping to shape, which you can then adjust interactively where (as here) the image is a different aspect than the Retina display. So if you want it, you can fill the screen instead of getting letterbox, all without having altered your main (Develop) crop for that image. Alternatively, if you don't want the Zoom to Fill option (e.g. with landscape images to be shown in portrait orientation as part of a sequence) you can still make all your images to the same dimension, but controlling the appearance of the borders that are left (which become part of the image) ]
RP
ps: AFAICT one would expect simple truncation to produce the appropriate answer half of the time; one would expect simple rounding to just one further digit, to be wrong half of the times when the following digit happened to be 5 - or to put in another way, to be right in 95% of cases; and proper rounding, examinng as many places as it takes, to be right 100% (within precision limits). -
Tecera A4 Wrong Image Size for Bios update....
using the site tools to id the machine to bios...it led me to a file named...sm45v20.exe, which i downloaded & attempted to update the bios...via floppy / usb drive method.
Done this with other machines (not this one) hundreds of times before...(fix a lot of friends machines...as this is). in the readme, it states this bios is for this string of machines...
Tecra A4
Tecra A4-S111TD
Tecra A4-S211
Tecra A4-S216
Tecra A4-S231
Tecra A4-S236
Satellite M40-S417TD
Satellite M45-S165
Satellite M45-S1651
Satellite M45-S265
Satellite M45-S2651
Satellite M45-S2652
Satellite M45-S2653
Satellite M45-S331
Satellite M45-S3311
Satellite M45-S351
Satellite M45-S3511
Satellite M45-S355
Satellite M45-S3551
where the tecera a4 is model I'm working on.
However, when booting into the update, it goes through the startup....reads the existing rom image...then attempts to look at the disk version...and gives the wrong image size message. Usually, this means ether you've got the wrong bios image (hmmm...toshiba led me to it...so maybe it's wrong...but readme says it's ok) OR the download was corrupt. Re-Downed the entire set up file again (file name as mentioned above) and tried again. All disk work on my master workstation which is almost always correct. (except when it's not?)
Any ideas? What the heck is the A4 anyway? Seems like a very rare model....
<edit>...the ENTIRE model number as shown on the bottom label is: PTA40U-1D701F </edit>
Message Edited by SetiRich on 04-16-2009 05:53 PMThis is a maybe...
Does the A4 in question have Intel video or ATI or nVidia?
Looks like there are different BIOS files depending on the video chipset. -
Image size H dimension does ot match image size on screen which prduces a gap between image and extension ? Conray.
Ray,
I think I understand what you are trying.
When you start with the image showing 6" rather than 8", I take it you are reading off the rulers on the left and top. Are you sure that there isn't a scroll bar on the right of the picture to move the image to show the bottom 2"? Try using Ctrl & 0 to fit the image to the window.
Do you work with images in floating windows?
The way I would get a 2" border at the bottom is to use Image - Resize Canvas Size and use relative changes.
Add the 2" height and make sure the anchor point is moved up.
Hope that might help
Brian -
I haven't figured out why Aperture is telling me the size of the images coming from my D70 are 3024 X 1998 px instead of 3008 X 2000 px. Does it stretch the images ? Until it does it right I don't trust it and don't dare to translate all my photos into Aperture… Thx for your help!
to clear things up: it has nothing to do with cropping or export or whatever - aperture simply doesn't work with the actual (true) pixel size.
the nikon d70 and d70s produce raw images at 3008 x 2000 effective pixels. nikon capture, picture project, adobe LR and photoshop open these files in these correct dimensions.
aperture displays and exports these (untouched, uncropped) files as 3024 x 1998, therefore stretches the width by 24 pixels and reduces the hight by 2 pixels. same happens if a nef is "opened in external editor" from within aperture (as jpg, tiff or psd) or exported at 100% (in any format).
this error is produced by the mac os and the way it handles these raw files (iPhoto shows the same WRONG pixel information and so does the os file info as well as "file info" in apple preview).
apple - we need a solution.
for those who are curious and don't have a d70 or d70s, i have uploaded a test nef for you at http://www.eleven01.com.au/aperture-d70s/DSC3255NEF.zip -
When I try to place a picture in photoshop CS6 either from drag&drop in the application window or from the place command, my image gets automatically resized based on the resolution (pixels per inch) of my document.
Example:
I create a new blank document, 1000*1000px @ 300ppi.
I have another image that I want to place in the document and this image measures 500*500px @ 100ppi.
I then go to File->Place and the image that appears is way too big. In the Info panel, it says that the image is 1500x1500 and the transform settings at the top indicate that the image hasen't been scaled because both width and height are at 100%
If I cahnge my document resolution (no resample) to 100ppi, the image has the right size when I place it.
So my question is: Is this normal? Because it has never done that with past versions of Photoshop. If it is normal, is there a way I can change this because placing an image based on it's physical (printed) size makes absolutely no sense. 1 pixel = 1 pixel.
Thank you for your helpOnce you understand how Photoshop works you can batch some some things you create some actions for. Size is difficult to deal with in actions and often you will have problems dealing with aspect ratios and image orientation.
To automate a process well scripting is more powerful then actions for you can use logic to solve problem area involving sizing, orientation, aspect ratios and positioning. You can size an image to cover an area then mask off any excess to virtually crop the image to the areas aspect ratio. If you download my Photoshop Photo Collage Toolkit there are script that create composite that can deal with any size image.
One script PasteImageRoll.jsx can past selected images into a document to be print on roll paper. Images will be tiled into the document some images may be rotated for a better fit for the tiles aspect ratio. Image will be resized to fill the tile area and masked to virtually make a center crop of the images. Other scripts will place in images file into collage template as smart object layers. Smart object images layers will be scaled to fit the various templates images areas position over the area and masked to the area. Link Documentation and Examples for the toolkit and Link Paste Image Roll Script Information
Scripting is very powerful you can even open image off the web using its URL even stack all the image on a web page using its url
OpenImageFromWeb.jsx
// OpenImageFromWeb.jsx
// Copyright 2006-2009
// Written by Jeffrey Tranberry
// Photoshop for Geeks Version 3.0
// modified by MLH
// modified by JJMACK 2010
<javascriptresource>
<about>$$$/JavaScripts/OpenImageFromWeb/About=JJMack's OpenImageFromWeb.^r^rCopyright 2010 Mouseprints.^r^rJJMack's Script.^rOpen Image From Web as a Placed smart object layer!</about>
<category>JJMack's Script</category>
</javascriptresource>
Description:
This sample script shows how to download images from a web server using the
Socket object.
// Note: Socket.read() parameter & behavior
// Socket.read() will read or time out. It may not read all data fromserver. <---------------
// Socket.read(999999) will read 999999 bytes, or timeout, or socket will be
// closed by the server.
// enable double clicking from the
// Macintosh Finder or the Windows Explorer
#target photoshop
// Make Photoshop the frontmost application
app.bringToFront();
// SETUP
var html = "";
var request = "";
var url = "";
var binary = "";
var requesthtml = "";
var socket = new Socket;
var domain = "www.mouseprints.net" // the domain for the file we want
var sImg = "/old/dpr/JJMack8btiSrgb.png"; // the rest of the url for the file we want
var port = ":80"; // the port for the file we want
// MAIN
var url = prompt("Enter the image's full URL http://domain/full image path",url); // prompt for domain name
if (url != null && url != ""){
if ( (url.indexOf("http://") != -1) || (url.indexOf("HTTP://") != -1) ) {
domainPathLength = url.length - "http://".length;
domainPath = url.substr(7, domainPathLength);
pathOffset = domainPath.indexOf("/");
domain = domainPath.substr(0, pathOffset);
sImg = domainPath.substr(pathOffset, domainPath.length - pathOffset );
// Isolate Image name
var Name = sImg
var imagePath = "";
while (Name.indexOf("/") != -1 ) { // Strip Path
imagePath= imagePath + Name.substr(0, Name.indexOf("/") + 1);
Name = Name.substr(Name.indexOf("/") + 1 ,);
//alert("domain = " + domain + " , Image = " + sImg + " Image File Name = " + Name);
if ( domain != "" && sImg != "" && sImg != "/" && Name.indexOf(".") != -1 ) {
var f = File("~/" + Name); // Image file name
f.encoding = "binary"; // set binary mode
f.open("w");
if (socket.open(domain + port, "binary")){
//alert("GET " + sImg +" HTTP/1.0\n\n");
requesthtml ="\n\nDmain:" + domain + " Port" + port + " binary\n"
request ="GET " + sImg +" HTTP/1.0\n\n"
socket.write(request); // get the file
var binary = socket.read(99999999);
binary = removeHeaders(binary);
f.write(binary);
socket.close();
else { alert("Connection to Domain:" + domain + " Port" + port + " Failed ");}
f.close();
if (binary.length != 0) {
//alert ("file length = " + binary.length );
if(app.documents.length == 0) {
//app.documents.add([width] [, height] [, resolution] [, name] [, mode] [, initialFill] [,pixelAspectRatio] [, bitsPerChannel] [,colorProfileName])
app.documents.add(new UnitValue(1600,'px'), new UnitValue(1200,'px'), 72, null, NewDocumentMode.RGB, DocumentFill.WHITE, 1,BitsPerChannelType.EIGHT, "sRGB IEC61966-2.1" );
placeSmartObject( f );
f.remove(); // Remove temporary downloaded files
else { alert("Invalid Image URL: " + url ); }
else { alert("Invalid URL: " + url ); }
else { if ( url == "" ) alert("No URL Entered"); }
// FUNCTIONS
function placeSmartObject(fileRef){
//create a new smart object layer using a file
try {
var desc = new ActionDescriptor();
desc.putPath( charIDToTypeID( "null" ), new File( fileRef ) );
desc.putEnumerated( charIDToTypeID( "FTcs" ), charIDToTypeID( "QCSt" ),charIDToTypeID( "Qcsa" ));
desc.putUnitDouble( charIDToTypeID( "Wdth" ),charIDToTypeID( "#Prc" ), 100 );
desc.putUnitDouble( charIDToTypeID( "Hght" ), charIDToTypeID( "#Prc" ), 100 );
desc.putUnitDouble( charIDToTypeID( "Angl" ), charIDToTypeID( "#Ang" ), 0 );
desc.putBoolean( charIDToTypeID( "Lnkd" ), true );
executeAction( charIDToTypeID( "Plc " ), desc, DialogModes.NO );
activeDocument.activeLayer.resize(100 ,100,AnchorPosition.MIDDLECENTER);
activeDocument.revealAll();
} catch (e) { alert("Placeing file: '" + fileRef + "' failed"); }
// Remove header lines from HTTP response
function removeHeaders(binary){
var bContinue = true ; // flag for finding end of header
var line = "";
var httpheader = "";
var nFirst = 0;
var count = 0;
while (bContinue) {
line = getLine(binary) ; // each header line
httpheader = httpheader + line;
bContinue = line.length >= 2 ; // blank header == end of header
nFirst = line.length + 1 ;
binary = binary.substr(nFirst) ;
if (httpheader.indexOf("Bad Request") != -1 || httpheader.indexOf("Not Found") != -1) {
alert (requesthtml + request + httpheader);
var binary = "";
//alert (requesthtml + request + httpheader + "\nFile length = " + binary.length);
return binary;
// Get a response line from the HTML
function getLine(html){
var line = "" ;
for (var i = 0; html.charCodeAt(i) != 10; i++){ // finding line end
line += html[i] ;
return line ;
StackWebPageImages.jsx
// Copyright 2007. Adobe Systems, Incorporated. All rights reserved.
// This script demonstrates how to download images from a web server using the Socket object.
// Adobe's Socket.jsx Photoshop sample javascript
// modified by JJMACK 2011
<javascriptresource>
<about>$$$/JavaScripts/StackWebPageImages/About=JJMack's StackWebPageImages.^r^rCopyright 2011 Mouseprints.^r^rJJMack's Script.^rPlaces Images used in a Web page as smart object layers in stack in a new document!^rOnly images embedded coded with path relative to the domains root will be Placed though.^rImages that fail to be placed may be Placed into the document using your browser right click to copy image URL.^rThen paste that URL into the OpenImageFromWeb script URL input field. </about>
<category>JJMack's Script</category>
</javascriptresource>
// Note: Socket.read() parameter & behavior
// Socket.read() will read or time out. It may not read all data from server.
// Socket.read(999999) will read 999999 bytes, or timeout, or socket will be
// closed by the server.
// Settings
#target photoshop
app.bringToFront(); // bring top
//if("en_US" == $.locale) { // display only US build
// alert("This sample script shows how to download images from a web server using the Socket object.");
// Remove header lines from HTTP response
function removeHeaders(binary)
var bContinue = true ; // flag for finding end of header
var line = "";
var nFirst = 0;
var count = 0;
while (bContinue) {
line = getLine(binary) ; // each header line
bContinue = line.length >= 2 ; // blank header == end of header
nFirst = line.length + 1 ;
binary = binary.substr(nFirst) ;
return binary;
// Get a response line from the HTML
function getLine(html)
var line = "" ;
for (var i = 0; html.charCodeAt(i) != 10; i++){ // finding line end
line += html[i] ;
return line ;
var socket = new Socket;
var port = "80";
var html = "";
//if (socket.open("www.adobe.com:80")){
// socket.write("GET /index.html HTTP/1.0\n\n");
// html = socket.read(9999999);
// socket.close();
var url = "";
var url = prompt("Enter the Web page full URL the images are in like http://domain/index.html",url); // prompt web page
if (url != null && url != ""){
if ( (url.indexOf("http://") != -1) || (url.indexOf("HTTP://") != -1) ) {
domainPathLength = url.length - "http://".length;
domainPath = url.substr(7, domainPathLength);
if ( domainPath.indexOf("/") != -1 ) {
pathOffset = domainPath.indexOf("/");
domain = domainPath.substr(0, pathOffset);
wPage= domainPath.substr(pathOffset, domainPath.length - pathOffset );
else {
domain = domainPath;
wPage = "/";
// Isolate Page name
var pName= wPage;
var pagePath = "";
while (pName.indexOf("/") != -1 ) {
pagePath= pagePath + pName.substr(0, pName.indexOf("/") + 1);
pName = pName.substr(pName.indexOf("/") + 1 ,);
//if (socket.open("www.adobe.com:80")){
if (socket.open(domain +":" + port)){
//alert("GET page = " + wPage + " HTTP/1.0\n\n");
socket.write("GET " + wPage + " HTTP/1.0\n\n");
html = socket.read(9999999);
socket.close();
//var aImg = html.match(/src=\"\/images\/(.*?)\"/g); // src="/images/~~~"
//var aImg = html.match(/img src=\"(.*?)\"/g); // img src="~~~"
//var aImg = html.match(/img src=\"(.*?)[\"?]/g); // img src=["|?]~~~"
//var aImg = html.match(/img (.*?)src=\"(.*?)[\"?]/g); // img ~~~src="~~~"
var aImg = html.match(/<img (.*?)src=\"(.*?)\"/g); // <img ~~~src="~~~"
//var aImg = html.match(/<img (.*?)src=\"(.*?)[\"?]/g); // <img ~~~src=["|?]~~~"
//alert("Image List\n" + aImg);
if (null != aImg) { // parsed image tags
//app.documents.add([width] [, height] [, resolution] [, name] [, mode] [, initialFill] [,pixelAspectRatio] [, bitsPerChannel] [,colorProfileName])
app.documents.add(new UnitValue(1600,'px'), new UnitValue(1200,'px'), 72, null, NewDocumentMode.RGB, DocumentFill.WHITE, 1,BitsPerChannelType.EIGHT, "sRGB IEC61966-2.1" );
for (var i=0; i < aImg.length; i++) {
var str = aImg[i];
imageNo=i+1;
//var sImg = str.substring(5, str.length-1); // remove "src=" & ["]
//var sImg = str.substring(9, str.length-1); // remove "img src=" & ["]
var sImg = str.substring(str.indexOf('src="')+5, str.length-1); // remove "<img ... src=" & ["]
try{
if (sImg.substring(0,7) == "http://" || sImg.substring(0,7) == "HTTP://") { placeWebImage(imageNo, sImg); } // redirect image
else {
if (sImg.substring(0,1) != "/" ) { sImg = pagePath + sImg ; } // image is relative to web page path
//else { sImg = sImg.substr(1, sImg.length - 1) ; sImg = pagePath + sImg; } // aways include web page path bad idea
// Isolate Image name
var Name = sImg;
var imagePath = "";
while (Name.indexOf("/") != -1 ) { // Strip Path
imagePath= imagePath + Name.substr(0, Name.indexOf("/") + 1);
Name= Name.substr(Name.indexOf("/") + 1 ,);
Name= imageNo + " " + Name;
//var f = File("~/socket_sample_" + i + sImg.substr(sImg.length-4)); // 4 = .gif or .jpg
var f = File("~/" + Name ); // Temp File name
f.encoding = "binary"; // set binary mode
f.open("w");
//if (socket.open("www.adobe.com:80", "binary")){
if (socket.open(domain +":" + port, "binary")){
socket.write("GET " + sImg +" HTTP/1.0\n\n"); // Adobe's site image link starts with "/"
var binary = socket.read(9999999);
binary = removeHeaders(binary);
f.write(binary);
socket.close();
else { alert("Socket Open " + domain + ":" + port + ", binary Failed"); }
f.close();
//app.open(f); // Open files in Photoshop
placeSmartObject( f );
f.remove(); // Remove temporary downloaded files
catch(e){
alert("Number of images found in page = " + imageNo );
else { alert("No images found for " + url); }
else { alert("Connection to Domain:" + domain + " Port " + port + " Failed ");}
else { alert("Invalid URL: " + url ); }
else { if (url == "") alert("No URL Entered"); }
// FUNCTIONS
function placeSmartObject(fileRef){
//create a new smart object layer using a file
try {
var desc = new ActionDescriptor();
desc.putPath( charIDToTypeID( "null" ), new File( fileRef ) );
desc.putEnumerated( charIDToTypeID( "FTcs" ), charIDToTypeID( "QCSt" ),charIDToTypeID( "Qcsa" ));
desc.putUnitDouble( charIDToTypeID( "Wdth" ),charIDToTypeID( "#Prc" ), 100 );
desc.putUnitDouble( charIDToTypeID( "Hght" ), charIDToTypeID( "#Prc" ), 100 );
desc.putUnitDouble( charIDToTypeID( "Angl" ), charIDToTypeID( "#Ang" ), 0 );
desc.putBoolean( charIDToTypeID( "Lnkd" ), true );
executeAction( charIDToTypeID( "Plc " ), desc, DialogModes.NO );
activeDocument.activeLayer.resize(100 ,100,AnchorPosition.MIDDLECENTER);
activeDocument.revealAll();
} catch (e) { }
function placeWebImage(num, url){
var socket = new Socket;
domainPathLength = url.length - "http://".length;
domainPath = url.substr(7, domainPathLength);
pathOffset = domainPath.indexOf("/");
domain = domainPath.substr(0, pathOffset);
sImg = domainPath.substr(pathOffset, domainPath.length - pathOffset );
// Isolate Image name
var Name = sImg
var imagePath = "";
while (Name.indexOf("/") != -1 ) { // Strip Path
imagePath= imagePath + Name.substr(0, Name.indexOf("/") + 1);
Name = Name.substr(Name.indexOf("/") + 1 ,);
Name= num + "R " + Name;
//alert("domain = " + domain + " , Image = " + sImg + " Image File Name = " + Name);
if ( domain != "" && sImg != "" && sImg != "/" && Name.indexOf(".") != -1 ) {
var f = File("~/" + Name); // Image file name
f.encoding = "binary"; // set binary mode
f.open("w");
if (socket.open(domain +":" + port, "binary")){
//alert("socket.write GET " + sImg +" HTTP/1.0\n\n");
//socket.write("GET " + sImg +" HTTP/1.0\n\n"); // did not work
socket.write("GET " + url +" HTTP/1.0\n\n"); // use url to this server works
var binary = socket.read(9999999);
binary = removeHeaders(binary);
f.write(binary);
socket.close();
//else { alert("Connection to Domain:" + domain + " Port" + port + " Failed ");}
f.close();
placeSmartObject( f );
f.remove(); // Remove temporary downloaded files
//else { alert("Invalid Image URL: " + url ); } -
Hello!
I have noticed a problem between my phone and a friends. We take a lot of pictures for work (location scouting, etc.) but her images seems to have a different file size than that of mine. When taking a picture, mine are usually ~1.5MB (sometimes bigger, some smaller.) Hers always come out ~500Kb. We only notice this when emailing the photos even though we are both using 'Actual Size', having done no editing, and literally send *immediately* after taking the picture. She has a 5S, I have a 5. We can take a picture of the exact same object and her image, when emailed actual size, will come out to be 1/3 the size.
Any thoughts?My "actual size" 5S images are also sent at around the 5-600kb size and reduced in size to 1536x2048 too. Tehre is no way to send the true 'actual size' image other than to use software to access the file itself. Iphoto sends actual size but cripples the file down to 1.5mb max in preparing for email.
Very frustrated that it does this. -
Wrong image size with a Nikon D70 and another issue
Hi everyone!
I'm a photography student and I switched a few weeks ago. I've been using Adobe Lightroom under Windows for months, now I'm trying Aperture.
I own a Nikon D70, which is a 6 Mpix camera. The resolution of the pictures should be 3008x2000 pixels. With Aperture they are 3024x1998... It's *neither the good ratio neither the native resolution* of the camera.
What should I do?
Also, although I set up my camera in MTP mode, it *won't work in tethering mode*. It came back from the Nikon service center with a Nikon D70s firmware, but it should work as well, right?
Thank you for your help!Strange! I had tried with the camera in PTP mode a few days ago, it wasn't working. Trying again now and it works! I must have done something wrong. Thank you anyway!
Then I tried again the Search tool, I didn't noticed the date range restriction on the first time, now I can see a few threads about that "problem". Although I'm really not satisfied with this "issue", it seems to be this way by design and not a bug.
Thank you everyone for your help!
(may I delete this thread since it has no interest for other people?) -
Xsan Admin reporting wrong volume size
I have an Xsan with 12T in a volume.
Xsan admin report only 4T free. In a Volume folder really it have used 4.5T (information obtain by the command du -h -d 1)but when I have Get Info in Volume, it show me 8T occupied.
Two weeks ago I had a cleanup of the system with cvfsck and the problem was corrected, but in this moment i have the same problem again.
Can you help me?Did you first see the problem after you upgraded to Xsan 2.2?
Are you running Mac OS X Server 10.5.8 or 10.6.4? -
MSI tab reports wrong mem size workaround
The problem:
The MSI tab in the display properties panel reported 64 megs instead of 128.
I had installed the drivers that came with the CD in the box (v 31.xx i think), I then removed them and installed
detonator v 41.09 from nvidia, that is when i noticed 64 instead of 128.
I tried removing 41.09 and installing 41.07(from MSI), it didn't make any difference, so I went back to 41.09 and I deleted 'msicpl.dll' to remove the MSI tab.
The Workaround:
1 Download the Detonator Destroyer (do a search)
2 Remove current Drivers with ADD/Remove Programs
3 Run Detonator Destroyer
4 Reboot
5 Choose Standard PCI VGA adapter and reboot if asked
6 Install 41.07 from MSI and reboot if asked
7 Repeat steps 2 to 5
8 Install 41.09
This is what I did and now I'm running 41.09 with the
MSI Tab reporting 128 megs correctly.
If anyone follows these steps without success I apologize for wasting your time.
Keep in mind the Msi Tab it's not a necessity.Detonator Destroyer is not yet written for XP or 2000.
In your case it worked like a charm because DD supports 98 8) -
Finder reporting wrong file size
I have a folder I wish to burn, it is 620 meg and has many small files in it, but when I go to burn it through the finder, I get an error that it is 900 meg and will not burn onto 1 disk. Backup tells me I need 3 disks for this folder, why?
I think the issue has to do with the fact that some programs have not adopted the new method yet. Unfortunately programs like iTunes can be used on on operating systems as far back as Tiger which used the old system. I noticed this several months ago and find it very irritating, especially when trying to do things like burn DVDs/CDs and trying to fill them up as much as possible. The only thing you can do about it is provide feedback to Apple at http://www.apple.com/feedback/ and hope they fix it in upcoming releases of their software.
-
Image size is not showing correct in Link Information in Illustrator CS3
Hi Guys,
I am using Mac OS 10.4.11 and Adobe CS3. I have a problem in Illustrator CS3. Let me explain what is that....
If I place a link in illustrator which is having PMS colors then some times illustrator is showing wrong image size in Link information panle. Please see the link. That link was already placed 100%. But sill it is showing 24%. Do some one have solution for this. If you have pleas let me know...
regards
HARIHi Neeraj
If I remove clipping path then it is showing 100%. But I did not get one thing, I have another image which is having clipping path and spot colors. If I place that image in Illustrator, Image size is showing 100%. There is no error in that file. So I think, this is not about clipping path, some other reason could be there.... If you want I'll give that image which is having clipping path and spot channels.
Thanks for the reply....
HARI -
Post Author: dwtalso
CA Forum: General
I'm currently working on a set of reports that has two images embedded on the "cover page". They are embedded as OLE Objects. Very often when I open these report to work on them the images will have shrunk. The "object" is still the same size because the border then it's selected is correct, but the image within the object is shrunk and distorted. Grabbing the object and nudging it on the page resets the image size and it will not change again until I close and reopen the report.
A little less frequently, I'll open a report and the image will be gone. The object is still there and can be select but there is no image. Nothing restores the image at all at this point. I have to reinsert the image from it original source or I have to open a different report and, if the image is good, copy the image and paste it into the broken report.
What am I doing wrong? What do I need to do to get these images to stop doing this?
ThanksCR, being a report writing software, is not that good at manipulating graphics. We rely on the graphics to be in as "usable a format" as possible when passed in to the report engine. Having said that, there are suggestions I've seen on these forums that may be of help. See if using the search at the top right corner (Select "ALL of SAP") will help.
- Ludek -
No Image Size menu or Message Size report in New Message window
Greetings all,
New iMac user (OS X 10.5.8, Mail 3.6). In scanning Mac Help & the Apple Support forums, I note numerous references for Mail 3.6 to an Image Size Menu button at bottom right of Compose window, and a Message Size window at the bottom left. Have never seen these items. Are they hidden? If so, what is the reveal? Appreciate any assistance. Thank you.
Gallery InfoTo All,
After sending in my question, I went back to Mail Help & noticed that images could be attached by dragging from Photo Browser or Desktop or Finder, or by clicking on the 'Paperclip' icon. We had only ever used the 'Paperclip'. Dragged an image from the Photo Browser and both Message Size report & Image Size menu button appeared. Then went back and tried Desktop, Finder & 'Paperclip'. Now, the two items appear, whichever method is used. Doesn't work on all .jpg images, but is sufficient for the need.
Guaranteed that if original question wasn't submitted, never would have found out how it works. Many thanks to Apple Discussions.
Gallery Info -
Image size reported incorrectly
We have a studio where we shoot 1080p (1920x1080 resolution). When we upload these files into Final Cut Server the Image Size column usually (but not always) reports that the Image Size is 1440x1080. This was really concerning me, but when I export the video back to my computer the original media is still 1920x1080. The poster frame image is also still 1920x1080.
Any ideas why FCS is reporting the incorrect Image Size most of the time?Philip Hodgetts wrote:
I've been under the impression that DVCPRO HD in 60 Hz countries is 1280x 1080 for nominal "1080" files. In 50 Hz countries it's 1440 x 1080.
Philip
That is indeed correct. Good point. Are you working in 50i, bradleylamar?
Maybe you are looking for
-
Premiere Pro CC crashes in opening a project file
I am using Premiere Pro CC since 1.5 years now. No big problems so far but now suddenly a strange one in opening a project file. Several other project files open up as usual, but the last one I've been working on, suddenly crashes in the middle of lo
-
Problem accessing external table
Hello, When trying to access an external table, we're getting the following error. ERROR at line 1: ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error ORA-01891: Datetime/Interval internal error ORA-06512: at "SYS.
-
Launchdaemon works manually but not at startup
I am trying to create a launchdaemon that will run a script to upload some information to our inventory server BEFORE login. Here is the .plist located in /Library/LaunchDaemons <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple/
-
Hello. I have recently started to experience major slow downs on my G5 when saving to the server. The problem is really noticable when saving from a program (Photoshop, Illustrator etc) to the server - it takes 30-40 secs whereas before it would be a
-
HI, Ive made an editable alv using my z-table. The z-table has a field sqty which is of type 'QUAN' referring to 'sunit' field(type UNIT) of same ztable . Whenever i try to edit this sqty field it behaves weirdly. If i enter 123456 value in sqty , it