DVDSP3 crashes at end of asset in track. Why?

So I have some assets, all encoded with Compressor (the 90 min, best quality setting), and when I line them up in a track, DVDSP crashes whenever I try to play the track, alwaya at the point where it reaches the boundary between the two assets. I tried re-encoding the assets in question and it still happens. Tried a fresh new track, everything. Anyone know what's happening here?
Oh, and this is DVDSP3 3.0.2.

Crud, I tried to reinstall FCP 6 and Compressor 3 and when I go to export from FCP to Compressor, Compressor window just goes away.

Similar Messages

IPod Touch skips (jumps to the end of) the first track. Bug?

Hello,
I'm experiencing the following problem with my iPod Touch and was unable to find any information about similar cases in different forums:
I have several Audible.de audiobooks on my iPod that are by default listed under "audiobooks". Recently I noticed that sometimes my Touch would jump over the first track of a music album when I would start playing the first song, directly jumping to the end of the track and starting to play the second (while the status dot stays at the end of track 1 for a while). It looks as if I had fast forwarded to the very end of the first track - and it happens with the first track only.
I've removed all the music and books from my Touch and moved it back using iTunes, but this didn't help for long. If I completely turn off the Touch and turn it back on, the problem is solved for a moment. I kept asking myself why the problem would reoccur and it seems to me that it has to do with the audiobooks I'm listening to often. I tried the following:
1. Switched off and on. Listened to music without any title jumping problem.
2. Opened an audiobook and listened to it for a few seconds.
3. Went back to music (any album) - the Touch jumps over the first track.
This leads me to believe that listening to audiobooks (maybe just audible audiobooks) creates this problem.
I also found out that after starting to play the first track (which gets immediately jumped over or, more exactly, to its very end), I can "heal" the Touch (until I listen to an audiobook again) by pressing Pause, then the back arrow twice so that I jump to the beginning of the first track, then back to the album cover and track list. After that, I can listen to music as long as I want to without any skipping or jumping, as long as I don't play an audiobook.
To me, this sounds like a bug, but I can't tell if Audible or Apple is to blame. Besides, I don't see an easy way to contact Apple about a bug that might be related to their OS, which I find upsetting (they hide their contact adresses so well that you can't tell them about bugs in their own software, or you have to pay for expensive calls?).
Maybe someone knows what to do or has already heard about a similar problem. I try to circumvent a complete reset of my iPod, as I have lots of apps that are arranged into many different groups. I'd prefer not to sort all of them again, but if resetting the iPod seems to be the only possible solution, I would try that of course. Of course I'd appreciate if someone could tell me how to fix this or whom to contact about it.
Thanks (also for reading this long description),
Alex
Message was edited by: alexhager

Hi MikeSpike,
Thanks for your comment! Have you tried everything to resolve it, like resetting the iPod as a new device after deleting the IPSW from your computer first? Does the error still occur?
In fact, I cannot reproduce the problem using podcasts (they work fine for me, as far as I can tell there's no effect between podcast and music on my device), but it may very well be that the error is the same or a similar one (this would be for Apple to investigate, I'll forward parts of your comment to the Apple Advisor taking care of my case, if you agree).
Yes, it is the first track. Although I had one rare occasion where only track 2 was skipped and another one where tracks it happened to tracks 1 and 2 (no shuffle, no remember position activated), the highly reproducible issue touches track # 1 only.
Thanks for precising that you're using a BT headset. Could you please tell me which one, in case that matters? Has your iPod sometimes reacted weirdly when you used your BT headset to remote control the iPod, for instance skipping more titles than you wanted when you pressed "forward"? This is kind of what happened to me on my iPad and since then I've noticed the error appear on the iPad too.
Regarding your other issues, I cannot confirm the podcast problem where a podcast starts at some random point. Podcast seem to work fine in my case, but maybe all of this is caused by one and the same error. Let's hope Apple will find it all and fix it in an update asap.
Also, I don't have the artwork problem where an album displays artwork from a different album. I have had a case where a few tracks of one specific album (and just that one) were not displaying the artwork at all, although everything was properly tagged using the software MP3Tag. If you haven't reset your iPod (as a new device, not from the backup), maybe this would at least resolve some of your problems?
While my problem is just annoying for people like me who simply want their new device to work without any errors (even if there's an easy temporary fix or workaround to these errors so that I could live with it), your errors sum up to a nuisance that makes it hard to enjoy using the device. Having wrong artwork displayed with albums (or none at all) and podcasts being played at random positions is certainly not what you'd expect from such an expensive device.
Have you thought of contacting Apple about it? Not only might they have a solution for your specific problems, but it might also be more convincing if more people would independently report the first-track-skipping-issue we're all experiencing! What they need to know is that the bug is global, not just a corner case, and that it seems to be somehow related to their iOS. They couldn't afford ignoring it if several people would complain about this, especially now that a new iOS beta is already out!
Maybe some other users who read this thread have made similar experiences without paying attention to it? To all other forum users: would you please try if you notice anything weird like first tracks being skipped, either music or podcast? Maybe related to audiobook listening, maybe related to BT headset use? I'd be happy to forward any observation to Apple (to the existing issue case number) in order to better convince Apple to investigate this - asap.
Thanks again, MikeSpike, of course I will keep you all updated if I hear back from Apple!

Please Help me place the arrows of my ScrollPane scroll bar together on one end of the scroll track!!

I have a scrollpane component with a movie clip of some
thumbnail images.
I just want to have its scrollbar arrows together on one end
of the track (or together ANYwhere) instead of having them at
opposite ends of the scroll track.
I have been able to customize the appearance of the
scrollpane and its scrollbar using the HaloTheme library, but that
approach has so far been of no use in getting the arrows together.
I cannot tell you how deeply any help will be appreciated. I
will probably sob and mewl with gratitude, the way I imagine
someone lost in a vast rain forest for many weeks mewls when
rescued. I am desperate. I am going insane. Please, please help me.

Cherrylanenc are you on a managed network? If not then I would recommend reviewing the steps listed in Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.

My macbook pro is crashing any clues on how to track down the problem?

my macbook pro is crashing any clues on how to track down the problem?
I'm running OS X 10.9.5 on a Late 2008 Macbook Pro... 8GB of memory... I've swapped the original drive for an SSD.
here is a problem report on one of the crashes... they always look just like this:
Mon Oct 6 17:53:40 2014
panic(cpu 0 caller 0xffffff80018dc43e): Kernel trap at 0xffffff7f82fe26e2, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80cdde2008, CR3: 0x000000004785e000, CR4: 0x0000000000000660
RAX: 0x0000000000000039, RBX: 0x0000000000000059, RCX: 0x0200000002400009, RDX: 0x7fffffffffffffff
RSP: 0xffffff80fdb8b820, RBP: 0xffffff80fdb8b860, RSI: 0x0000000000000059, RDI: 0xffffff80cdde2008
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80fdb8b380, R11: 0xffffff7f81efab4c
R12: 0xffffff80cdde2008, R13: 0xffffff802de1d008, R14: 0x0000000000000059, R15: 0xffffff80cdde2008
RFL: 0x0000000000010282, RIP: 0xffffff7f82fe26e2, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80cdde2008, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80fdb8b4b0 : 0xffffff8001822f79
0xffffff80fdb8b530 : 0xffffff80018dc43e
0xffffff80fdb8b700 : 0xffffff80018f3976
0xffffff80fdb8b720 : 0xffffff7f82fe26e2
0xffffff80fdb8b860 : 0xffffff7f82fe3cbf
0xffffff80fdb8b970 : 0xffffff7f82fe3ff2
0xffffff80fdb8b9e0 : 0xffffff7f82fe4256
0xffffff80fdb8ba60 : 0xffffff7f82ff53d7
0xffffff80fdb8baa0 : 0xffffff7f82fef706
0xffffff80fdb8bae0 : 0xffffff80019fabd6
0xffffff80fdb8bb10 : 0xffffff80019fb38e
0xffffff80fdb8bb30 : 0xffffff80019de87a
0xffffff80fdb8bc80 : 0xffffff8001b82cc3
0xffffff80fdb8bcd0 : 0xffffff8001b7c076
0xffffff80fdb8bd80 : 0xffffff80019fabd6
0xffffff80fdb8bdb0 : 0xffffff80019fb38e
0xffffff80fdb8bdd0 : 0xffffff80019de87a
0xffffff80fdb8bf20 : 0xffffff80019e602a
0xffffff80fdb8bf50 : 0xffffff8001c40c63
0xffffff80fdb8bfb0 : 0xffffff80018f4176
      Kernel Extensions in backtrace:
         com.apple.filesystems.afpfs(11.1)[DCC45CDD-E950-364F-8221-1A914106BC59]@0xfffff f7f82fd7000->0xffffff7f83025fff
            dependency: com.apple.security.SecureRemotePassword(1.0)[BC0BAB92-C8C9-3959-AA42-272AF578DF D9]@0xffffff7f82fc6000
BSD process name corresponding to current thread: mds
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x0000000001600000
Kernel text base: 0xffffff8001800000
System model name: MacBookPro5,1 (Mac-F42D86A9)
System uptime in nanoseconds: 13782929543220
last loaded kext at 732159785634: com.apple.filesystems.smbfs    2.0.3 (addr 0xffffff7f83026000, size 335872)
last unloaded kext at 315936860456: com.apple.filesystems.msdosfs    1.9 (addr 0xffffff7f82fb9000, size 57344)
loaded kexts:
tc.tctechnologies.driver.Saffire    8028
com.iospirit.driver.rbiokithelper    1.8.0
com.squirrels.airparrot.framebuffer    3
com.Logitech.Unifying.HID Driver    1.3.1
com.squirrels.driver.AirParrotSpeakers    1.8
com.Logitech.Control Center.HID Driver    3.9.1
com.apple.filesystems.smbfs    2.0.3
com.apple.filesystems.afpfs    11.1
com.apple.nke.asp-tcp    8.0.1
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.2.7f3
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AGPM    100.14.34
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHWAccess    1
com.apple.GeForceTesla    8.2.4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.7f3
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.AppleMuxControl    3.6.22
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleLPC    1.7.0
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.BootCache    35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.iokit.SCSITaskUserClient    3.6.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBOHCI    656.4.1
com.apple.nvenet    2.0.21
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.security.quarantine    3
com.apple.nke.applicationfirewall    153
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.security.SecureRemotePassword    1.0
com.apple.kext.triggers    1.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IOSerialFamily    10.0.7
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.nvidia.classic.NVDANV50HalTesla    8.2.4
com.apple.nvidia.classic.NVDAResmanTesla    8.2.4
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.7f3
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleGraphicsControl    3.6.22
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.IOBluetoothHIDDriver    4.2.7f3
com.apple.iokit.IOBluetoothFamily    4.2.7f3
com.apple.driver.AppleUSBMultitouch    240.10
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.7
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.7
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IOUSBFamily    686.4.1
com.apple.iokit.IONetworkingFamily    3.2
com.apple.driver.NVSMU    2.2.9
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    7
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOReportFamily    23
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.41f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x85F7, 0x483634353155373946373036364700000000
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1067 MHz, 0x85F7, 0x483634353155373946373036364700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: OWC Mercury Electra 3G SSD, 480.1 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: USB2.0 Hub
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: USB Receiver
Thunderbolt Bus:

These may be your problem candidates:
Uninstall them and then reinstall in a systematic manner and see if the MBP crashes again. If and when it does, then that is the troublemaker.
Ciao.

Hi, I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why? In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

HT1386 I recently purchased an album from itunes. When I subsequently sync'ed my ipod touch I ended up with all tracks of that album doubled on my ipod and I lost all my playlists. Subsequent syncing has not fixed it. Any ideas what to try?

I recently purchased an album from itunes. When I subsequently sync'ed my ipod touch I ended up with all tracks of that album doubled on my ipod and I lost all my playlists. Subsequent syncing has not fixed it. Any ideas what to try?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Snap render / workarea bar to end of asset in timeline

Is there a way to Snap the render/workarea bar to end of asset/layer in timeline?

Select the layer.
Type the letters IB to move the Current Time Indicator to layer in-point and define the Work Area to start at this point.
Type the letters ON to move the Current Time Indicator to the end of the layer and define the Work Area to end at this point.
So, obviously, to make a layer's start and end define the Work Area start and end, select the layer and type IBON.

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.

When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
It only seems to do this since an iphone download last year.......its driving me mad !

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
When associating a device with an Apple ID see the following regarding the 90 day limit.

My adobe illustrator cc v18 CRASHES at startup on win7...why??

My adobe illustrator cc v18 CRASHES at startup on win7...why??

Did it ever work? If so, try a System Restore to a point it did.

Every time i double clicked the group to do some editting, it crashed and stopped working. win8 and cs6. why!!

every time i double clicked the group to do some editting, it crashed and stopped working. win8 and cs6. why!!

What happens if you turn off the preference double click to isolate.

When recording a midi track, why is it automatically creating a loop whenever I stop?

When recording a midi track, why is it automatically creating a loop whenever I stop?
I am using Logic Pro 9 on a MacBook Pro and Yosemite 10.10.1

Hi
Probably because you have the MIDI Thru parameters set to loop?
Click in the background of the Arrange window, and in the Region Inspector (MIDI THRU) deselect 'Loop'
CCT

DVDSP3 Crashes When trying to add assets

Hi, I recently upgraded to a Quad 2.5Ghz Power Macintosh and have been transferring files over from my old G5 for my DVD Studio Pro projects. On the new computer I have all my old project files, and the media that go along with them. Problem is when I try to view any of the MPEG-2 files DVDSP instantly quits out. My AC3 files seem to work fine and using an Apple template for a menu seems to work too.
While we're at it, Compressor tells me that I don't have the necessary requirements including a Power Macintosh of at least 350 mhz or an AGP Graphics card.
Thanks
-Derek

I found a Doc on Apple's site, apparently DVD Studio Pro 3 isn't compatible with the Quad Power Mac G5s or the iMac G5s with the iSight. It has to do with the graphics being in a PCI slot instead of AGP.
http://docs.info.apple.com/article.html?artnum=302992
The document says buying Final Cut Studio is necessary in order to use DVD SP (4) on a Quad Power Mac.
Grrrr...planned obsolescence

Is itunes supposed to crash every time I skip a track?

So I'm trying to import a CD, well, several CDs...Which makes this very irritating by now!
I'm importing my CDs, but I don't want every track. I listen to the first track & decide to keep it, I skip to the next one, iTunes crashes.
I relaunch, start that next track again, I decide I don't want it, I uncheck it. iTunes crashes.
I even tried tricking it, fast forwarding to near the end of the track & just letting it play through to the next, but as soon as that next track starts, iTunes crashes.
So I wonder, maybe I should just play it all, then uncheck after wards, no skipping, just the CD as it was meant to be. Nope, iTunes crashes after every track!!! It's ok playing my library, I can even skip! But not on CDs. I am very close to breaking something!
Anyone else had this problem & fixed it?
I have tried restarting my Mac, I left it a day & tried again, I have re-installed iTunes from the official site. This all started going wrong after that last update....I really hope i'm not alone & they plan on fixing this!

Instead of Sharing to iDVD you want to Share to Media Browser. This will save the movie to a special folder inside of iMovie that you can then see from inside the iDVD program.
Choose Share > Media Browser (it's at the top of the list)
Choose the Large size and let it roll. It will take a while for it to work.
When it's finished quit iMovie.
Open iDVD, Create a new project.
Go to the button labeled "Media" in the lower right hand corner of the iDVD window, and click it.
Just above that is a window with some buttons across the top. Click on the button labeled "Movies".
Inside the window you will see an iMovie star icon, double-click the triangle beside it to see all the movies being shared. Your iMovie project will appear there.
Drag the iMovie project into your iDVD project.
The quality of the final DVD is visibly better, sharper than if you were to Share directly to iDVD. So bypass Share to iDVD altogether and see if it stops crashing.

Quad Question: DVDSP3 crashes after importing .m2v

Hello. Just got a Quad G-5, and trying to get DVD Studio Pro 3 to run. It runs good... until I try to import .m2v assets. If i try to move those assets into my track timeline, then the beach ball appears, DVDSP 3 kicks off, the screen retruns to my desktop, and I stare blankely at a pop window that says something to the like of "to send report, close, or restart app." (something like that)
So far, I've been able to mess around a little with templates (small things like change font or position of font). But the .m2v assets crash the program.
Would it matter if the assets were created from Compressor, but from a different machine using the same program?
Saw situations like this posted on the boards around June/July this past year. (can't seem to find info on it now, though).
Any help would be greatly appreciated.

Have you downloaded and installed:
http://www.apple.com/support/downloads/proapplicationsupport30macosx104.html

ITunes 12.0.1 crashes at end of movie download from iTunes Store

I have a Mid-2011, 21.5" iMac running Yosemite v10.10.1. I upgraded from 4 to 8 GB of RAM about a year ago, but I don't think that's an issue with this problem.
I can no longer download movie or tv show purchases from the iTunes Store to iTunes v12.0.1 on my iMac. The download starts and lists in the Downloads pane in iTunes. However, once the download has completed and the Download progress bar message changes to "Processing..." iTunes crashes. When I start iTunes back up again, the downloaded movie is not present in my iTunes Movie library. However, if I navigate to the iTunes\Movies\ folder, I can see a folder for the movie and a file instance of the movie (in m4v format) for every attempted download. Something seems to be going wrong with iTunes ability to add the link to the movie file into my iTunes library.
I tried adding the movie folder and file manually to iTunes using the iTunes->File->Add to Library... menu option, but iTunes instantly crashes the moment I click the "Open" button in the Add to Library... dialog window.
I have several movie purchases and gifts that I'd like to add to my local iTunes library, but this error is blocking me from doing that. (Poop!)
Some weird things about my iTunes library on my iMac:
My iMac does not have a large enough built-in harddrive (only 500 GB) to store my iTunes library. In a prior version of iTunes, I located the library on an external 3 TB USB-3.0 harddrive. I'm wondering if there's a bug in iTunes 12.0.1 that occurs when adding content to the iTunes library when that content is located on an external harddrive, i.e. in a folder other than \User\{my username}\Music\iTunes Media\. Perhaps I need to change the iTunes folder structure on the external harddrive to mirror the new folder structure in my \User\{my username}\Music\ folder. I'm a little leery about doing this as I do not want to break all the links in my iTunes library to existing songs, movies, etc.
Thank you,
Isaac

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

DVDSP3 crashes at end of asset in track. Why?

Similar Messages

Maybe you are looking for