DVI Component to HDTV : no setting works

I have a DVI to component video cable connected to the DVI port on my Mac Pro running out to the component input of my HDTV. The video card is the X1900. Leopard detects this as a VGA display. Wierd considering its not VGA but whatever. I get signal to the HDTV but I can't seem to find a resolution/refresh rate setting that works. Every setting I try shows an unusable picture. I believe for television the refresh rate needs to be 60hz. I checked the specs of the X1900 and it does, in fact, support component video out. This is from their website (http://ati.amd.com/products/Radeonx1900/specs.html):
* Content-adaptive de-flicker filtering for interlaced displays
* Xilleon™ TV encoder for high quality analog output
* YPrPb component output for direct drive of HDTV displays
* VGA mode support on all outputs
* Drive two displays simultaneously with independent resolutions and refresh rates
The card is capable so it must be a Leopard thing right? Could the issue be related to the fact that its being detected as a VGA display?

Is there any indication at all that the Mac sees the Grundig? In Displays preferences there should be an "Arrangement" tab and you should also be seeing two sets of timings. If the Mac is not seeing it at all, you may need to exchange the Mini DVI to DVI adapter for a Mini DVI to VGA adapter and hook up to the TV by VGA.
Does the Grundig user manual mention computer connections? Usually the manual would say which input port is suitable to connect to a computer.

Similar Messages

Logical component can not be set to &&

Hi
I will create a new Business Process.
If I set the name of Business Step and the name of Logical Componets appaers the following message ..
Logical component can not be set to /NSN/PROJECT VIEW
Message no. SOLAR_EN204
Diagnosis
The parent business process of the current process step is 'production', therefore you can not set logical component to /NSN/PROJECT VIEW, which is without logical system in the leading role.
System Response
You can not set the logical component /NSN/PROJECT VIEW
Who has a solution for me ??
Thanks for your help )

The only way I can see it working is if the direct-to-field mapping is writable and the 1:1 is set as read-only since otherwise, if the OBB reference is null, it means the objects PK is null. I'm not sure how it was even queried with a null OBB as it means its OBA.id is null as well. This worked in 904 as it did not correctly validate PKs in the uow - this was fixed through bug 4569755. If you feel this should not have been changed, please file it with support and the fix can be revised.
The way I have mapped this in the past is that tab1 and tab2 are linked using the pks have same name option in the workbench (this makes tab2.id dependent on tab1.id). The OBA object then would have an id attribute that would represent the tab1.id and be writable, and if required, a 1:1 representing the OBB reference that was read only - allowing the OBB reference to be null if OBA entries can exist independently.
Best Regards,
Chris

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Switch 2nd monitor between dvi monitor and hdtv

I have an Intel iMac and I use the mini-dvi output to have a second monitor for working on the computer and also to watch online videos on my hdtv. Both work great. The problem is I have to reach around the back of the iMac to unplug the dvi monitor and plug in the tv and then do it again when I want to get back to work. I am pretty sure that the mini-dvi socket is not built to be used twice a day or more, so I am eager to find a better solution (preferably cheap).

I am using the apple mini-dvi to dvi adapter with a dvi-hdmi cable to connect to the visio 42" hdtv and the same apple mini-dvi adapter with a regular dvi cable to connect to the Sceptre 22" monitor. The TV is in the next room, so it is not really practical to use as a second monitor, besides sometimes my wife wants to watch TV while I am working.
I think what i am going to do is get a small dvi extension cable and leave that connected to mini-dvi adapter which I will leave plugged into the iMac. That way I will just be plugging and unplugging into the dvi extension cable (which is more robust than the mini plug) which will be much easier than reaching blindly behind the iMac. If the extension wears out I can just get a new one rather than having to get the iMac repaired.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

My mini dvi output port is no longer working (2007 iMac) please help!

My mini dvi output port is no longer working, can this be replaced or do I need a new motherboard? (it's a 2007 iMac, no longer under warrantee. Long story short when I was out of town someone cut my power cord on my tv I went to turn the tv on and looked at the back of the tv to see if there was any loose connections and found the cord sliced 3/4 of the way through. I must have bumped the cord and it sparked and made a loud pop noise. Well it fried the tv (which has since been fixed) but everything that was connected to it (my ps3, receiver, and my iMac) ports are all not working now... (and yes i did try new hdmi cables to see if it was just that) If this is a hardware issue what exactly is needed to fix this? A new main board? Any feedback would be great on this. I took it to apple and they said $650 to replace the motherboard... Was just wondering if this port can just be replaced or if it is a part of the main board and that does need replacing. Everything else works fine on all three things (ps3, receiver, imac) just the outputs are fried on them. Is there any other way I can do video out of my iMac other than mini dvi? I'm not paying for the repair so I don't mind having apple replace the board, but for $650... I may as well get a new iMac for $500 more...

If Apple said the motherboard is gone, that's your answer. Even if you were to find out the port isn't part of the main board, it's all connected when you're talking about a power surge/short as you described it. And yes, I'd never invest $650 in a 5 year old computer.

Error "No entry in table T551A" while creating set work schedule rule.

Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.

HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh

Setting "work Time" on a outbound call?

I have a request for me to set "work Time" built in after a outbound call. So if the user makes a call from the agent and then after they hang up it would wait 30 seconds before presenting them a call. I have UCCX 7.2 Express Enhanced Not sure if this is even possible but thought I would ask
Thank you!

Thank you for the information Andrew! I apreciate it. I will pass it along

Set work area shortcut not working Premiere CC

Hello,
I'm having a weird issue, the set work area shortcuts aren't working on Premiere CC on my Mac. Nothing happens when I hit the shortcut combo,
which are set for option [ and option ] under the keyboard shortcut menu.
The shortcuts work as expected on Premiere CS6. Am I missing something here?
Thanks,
Gerry

Hey Peter,
Thanks I didn't realize that Premiere had changed the default to work area off, I found it and can see my work area now.
Cheers,
Gerry

Leopard and Mail won't send emails, same exact setting working on my PC

I am trying to set up my new MacBook to use the Mail app (or Thunderbird, or any mail program at this point). I can get mail, but can't send mail. I've read lots of discussions on here about port numbers, etc. Here's my problem - all my setting work on my PC laptop in all locations. Same settings don't work on my MAC with mail or with Thunderbird. And Eudora on my Mac just freezes...I can't test the same settings on my desktop mac cause it's a company machine. Ideas?

Did Earthlink have you try using their authenticated SMTP server?
If not, try changing Earthlink's SMTP server settings to the following:
SMTP Server: smtpauth.earthlink.net
Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
Use Secure Sockets Layer (SSL): Off or not selected.
Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
User Name: Your entire Earthlink email address.
Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

Set Work Schedule Rules and Work Schedules

Hi!
I have defined the next Period Work Schedules:
Grp     PWS     PWS Text     Week     01     02     03     04     05     06     07
02     TTLM     Turnos Telemando     001     M7     M7     T14A     T14A     N22     N22     LIBR
02     TTLM     Turnos Telemando     002     LIBR     LIBR     LIBR     LIBR     LIBR     M7     M7
02     TTLM     Turnos Telemando     003     T14A     T14A     N22     N22     LIBR     LIBR     LIBR
02     TTLM     Turnos Telemando     004     LIBR     LIBR     LIBR     M7     M7     T14A     T14A
02     TTLM     Turnos Telemando     005     N22     N22     LIBR     LIBR     LIBR     LIBR     LIBR
02     TTLM     Turnos Telemando     006     LIBR     M7     M7     T14A     T14A     N22     N22
02     TTLM     Turnos Telemando     007     LIBR     LIBR     LIBR     LIBR     LIBR     LIBR     M7
02     TTLM     Turnos Telemando     008     M7     T14A     T14A     N22     N22     LIBR     LIBR
02     TTLM     Turnos Telemando     009     LIBR     LIBR     LIBR     LIBR     M7     M7     T14A
02     TTLM     Turnos Telemando     010     T14A     N22     N22     LIBR     LIBR     LIBR     LIBR
02     TTLM     Turnos Telemando     011     LIBR     LIBR     M7     M7     T14A     T14A     N22
02     TTLM     Turnos Telemando     012     N22     LIBR     LIBR     LIBR     LIBR     LIBR     LIBR
03     TCC     Turnos Contac Center     001     M730     M730     M730     M730     M730     LIBR     LIBR
03     TCC     Turnos Contac Center     002     M8B     M8B     M8B     M8B     M8B     LIBR     LIBR
03     TCC     Turnos Contac Center     003     M830     M830     M830     M830     M830     LIBR     LIBR
03     TCC     Turnos Contac Center     004     T14B     T14B     T14B     T14B     T14B     LIBR     LIBR
03     TCC     Turnos Contac Center     005     T15     T15     T15     T15     T15     LIBR     LIBR
After, when we set Work Schedule Rules and Work Schedules. Do we need create the same number of rules?
For instance, in Period Work Schedule, do we need create 12 rules like TTLM_1, TTLM_2, ... TTLM_12?
Or is enough create only one rule for TTLM?
Kind regards,
Julian.

Hi,
You need to create 2 Work Schedule rule one with TTLM PWS & second with TCC PWS.
Rgds,
Lata

Setter works but Getter does not

Hi all,
I have had relatively little problems with setting up and running Entity Ejb's as of yet with simple beans (with 2 attributes only). The below problems seems to be implemented in the same way as the smaller been, with the only difference being that this bean has 6 attributes.
Quite simply,
I have no problems setting up the EJB, deployement of EJB, and the running of the server.
I have created a testing program that creates a new instance of the bean, looks up a bean, sets one of the attributes of the bean and then uses a getter method to check to see if the setter works.
Out of all of the above I thought the simplest thing to use would be the getter method. But this is the area that I get the exception.
As I said everything else works, I can even check the database to check if the setter method works, and it does.
The exception that is called is:
<code>
java.rmi.ServerException: RemoteException occurred in the server thread; nested exception is:
java.rmi.RemoteException: Exception is in getAddress: nested Exception is:
javax.ejb.NoSuchEntityException
</code>
The name of the getter method that is called is getAddress, as seen above.
Please could anyone help.
Thanking you
Damian

Hi all,
I have been working on the problem now for a little more and I have worked something out.
I worked through everything and tried to work out what was out of the ordinary. I realized that I had an attribute in the bean of type java.util.Date. While all other attributes were of type String. When I created the bean with out the Date column, the getter methods for all the other attributes seem to work (unlike before).
Why has this made a difference, what is it about having a setter and a getter method for datatype Date that affects all of the other getter methods.
Of course I want to be able to have fields with datatype of Date, so please people help me on this one.
Damian

MBP to HDTV won't work - mini displayport to dvi - belkin dvi to hdmi

Hey, I'm trying to get my laptop hooked up to my tv, using the apple mini displayport to DVI -> belkin DVI to HDMI cable setup (as recommended by the dude int eh apple store - which i knew and planned on doing anyway :P).
anyway, when i first plugged it in to the tv in my hotel room it worked, 1080p, then stopped .. then randomly worked again after a few ties. Once I got home i hooked it up to my sharp aquos 42 and worked fine, then after it was unplugged and tried to get it working again, it basically just.. wouldn't - i don't get a picture/signal on the tv, no options in the display cp , nor does the screen go blue when it normally finds a monitor/tv. i've tried plugging it in both ends, restarting, turning tv off/on, everything to no avail. I know the dvi-hdmi cable works, used it from a windows desktop to make sure. the mini displayport to DVI works for DVI 100% of the time into one of my monitors.
as mentioned it had worked at first on and off..., and now i cant get it working on my 1080p tv, nor the 720p one that's in my room, neither of them get a picture/signal; no options in display control panel either, or the quick display flash to blue. Furthermore, sometimes when unplugging the dvi cable from the tv i get the laptop screen flash, as when it picks the device up initially.
I never got my emailed invoice from apple when I bought the cables in in SF during macworld so I cant just return it to apple I'm sure.
any ideas would be greatly appreciated, please help this is making me go crazy... worked and now nothing no matter what i try. Oh, also tried on another, new user to see if it was a weird setting that got saved.
mbp running 10.6.2

I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

Mini-DVI to HDTV setup not working right

Hi folks,
I have an iMac8,1 (24" intel with mini-dvi video port) that I am trying to hook up to my 50" plasma TV for surfing the web and looking at photos from the sofa. I've hooked it up with an apple mini-dvi to composite/S-video adapter with very poor results. As soon as I plug the adapter into the mini-dvi port, the iMac changes to a 4:3 aspect ratio at a very low resolution. The video is mirrored to the TV, again at a 4:3 aspect ratio and the resolution is awful. Text is all but unreadable.
I try switching resolutions from the display preferences pane, but nothing seems to work right. There are two display detected...the iMac and NTSC/PAL. Changing the resolutions on either of them don't seem to behave properly at all...everything just stays really coarse on the iMac no matter what, and the TV is horribly fuzzy. If I unplug the adapter from the iMac, the screen returns to 1920x1200.
Any thoughts? Should I be using a mini-DVI to HDMI for the video instead of the composite/S-video adapter?
Steve

Hello mmogie,
The problem is not with in the adapter. The quality on the external LCD or Plasma depends the most on the graphic cards. Thats that.
And in your case your problem is the mirroring, you will get really bad quality on the external screen because you are trying to mirror it with the one on our iMac and the Plasma screen supports different resolution then your iMac does so what happens is when you mirror it the graphics cards tries to find the middle ground ...
Now what you need to do is configure the plasma as extension not as mirror (Under Display Preferences>Displays ) select the second tab "Arrangement" and uncheck the mirror Displays.
So what the graphics will do is find you nice proper resolution for your imac and your Plasma separately and you will have good quality picture, and from there you can change the resolution to tweak it a bit more...
Now to take a step further if you want your Plasma to be the primary screen for your OS X and for you to have the dock on there, run apps and browse the web, all you have to do is from the "Arrangement" tab in the Displays Preferences just point the mouse on the wthite line and click and hold to "Drag and drop" it to your second screen "the Plasma" in your case and you will see how the dock and the task bar will show on the Plasma and you take it from there....
Sorry for the long explanation, I hope this helps. Please let me know.
Good Luck,
Goran

My Fall 2009 system DVI output to our HDTV doesn't include audio. Connecting the Macbook headphone output to the TV's RCA plugs works if TV is in AV (PC) mode, but no picture. DVI to HDMI adapter to TV works fine for picture, but no audio.

My Fall 2009 model Macbook Pro DVI output apparently doesn't include audion. Adapting DVI to HDMI works with new LG TV, but doesn't provide sound. Connecting the Macbook headphone output to the TV's RCA jacks give sound with the TV in AV (PC) mode, but no video. Is there a fix for this? Search for a DVI to HDMI adapter that includes a plug for the headphone jack comes up empty, so far.

DVI has never included audio, sorry.
There is also no DVI->HDMI adapter including a plug for audio; such thing cannot work without quite a bit of electronic extra effort.
Instead of much bla-bla, why don't you tell the exact TV model, and we'll try to come up with a solution?
BTW, no home theater AV receiver present, correct? Sound to come from the TV, correct?

DVI Component to HDTV : no setting works

Similar Messages

Maybe you are looking for