DVI connections not working

I guys,
I'm having a "small" issue with my old iMac and I was wondering if any of you could help me.
When I connect my late 2007 iMac 20" to my DVI monitor I get nothing, but when I connect to the same monitor throw VGA I get dual display, I've tried different cables an two different mini-dvi to dvi adaptors, one of them brand new. It was working fine until 2 days ago but now nothing.
I'm a bit frustrated because I've tried so many different things and I still get nothing
Cheers

Are the resolutions beyond this?
2nd Display Support:
Dual/Mirroring
2nd Max. Resolution:
1920x1200*
Details:
Apple reports that this model supports "digital resolutions up to 1920x1200" and "analog resolutions up to 2048x1536".
I'm starting to suspect the Monitor, or some input setting on it, VGA almost alway can do higher & a wider range of resolutions than DVI single-link.

Similar Messages

DVI connection not working, any ideas?

I just purchased a Powermac G4 1.0 DP (MDD) the other day. When I tested it out at the persons house that sold it to me it was working fine. However once I brought it home and tried connecting my DVI monitors, and neither of them worked.
Is there something different about the DVI connection on the graphics card that needs a special connection/adapter? Or is that DVI port on this model only for a second/dual monitor setup?
If this is the case, I suspect I'll need to buy a ADC->DVI adapter. Anyone know why the DVI doesn't appear to be working for me?

I found the answer, I suspect the DVI standards didn't work properly with the video card and my cable, which caused the monitor not to receive a signal. As the mac used DVI-I, and my cables were DVI-D.
I went to bestbuy and purchased a Dynex DVI->VGA adapter, and everything worked like a charm. ;]
http://www.dynexproducts.com/p-460-dynex-dvi-to-vga-adapter.aspx

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Camera connection not working with my camera

Camera connect not working with my Sony boggie camera

The Bloggie will not work because it draws too much power from the USB port on the iPad. The solution is to interpose a powered USB hub between the Bloggie and the iPad - connect the Bloggie to the powered hub, then connect the hub to the ipad accessory. Works fine with my 3D Bloggie.

X-Fi Titanium PCI Express front pannel connection not working

<font face="verdana,geneva" size="3">I can not get any signal to or from the front pannel connector of my X-Fi Titanium PCI Express. (The rear jacks are working fine.)
<font face="verdana,geneva" size="3">The front header cable from my Antec P-80B worked perfectly with my onboard motherboard sound. Now that I have it connected to my X-Fi I get nothing from the jacks on the front of my case. (The onboard sound is disabled in my BIOS.)? I've double and tripple checked the connection and it is properly keyed and fitted. Is there a step or a setting that I'm missing somewhere to get this working? Can anyone confirm that the front pannel connection is acti've on the X-Fi Titanium PCI Express?

Re: X-Fi Titanium PCI Express front pannel connection not working? I was truly hoping that would help and I wanted to give you some additional hope. I have a coolermaster case, and it has the AC97 jack on the inside with all my other other front panel connectors for hard dri've activity light, reset, and power on. Three inches down from the AC97 jack, the INTEL HD *which works beautifully with the X-FI, only differs by three wires in different locations and the two pinouts configurations match those of the INTEL site identically.
Please tell me what happens as I would like to post a step by step guide for the others here in the forum. You will know when you have successfully adapted the connector because in VISTA and Windows 7, your sound applet in control panel will have a display of the connectors "lit up" when they are successfully connected. Mine shows FP microphone in the applet when its plugged in, and grayed out when its not. Its great for telling if I am connected on the rear of the soundcard of the front.
Best of luck and .......
Message Edited by jmacguire on 07-06-2009 :09 PM

Mini Display port DVI adapter not working on Thunderbolt Port

For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV. I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly. The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it. Does the Thunderbolt port require a new display port to DVI adapter?

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

T410 with integrated graphics - DVI output not working on Mini Dock 3 (4337)

I tried connecting my external monitor to the DVI output of the Mini Dock and it did not work. I have since connected it with no issus to the VGA output.
However, I want to use the digital (DVI) connection for my monitor........how can i fix this issue?
NOTE: I have a T410 with the integrated graphics so my laptop screen does not display while docked (I keep the lid closed).

Hi MarkinIt,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with no Display when connected to docking station on your ThinkPad T410.
Have you checked updating the Intel graphic driver from Lenovo support site?
Please provide the current Graphic driver version showing in device manager.
Is the system having Windows 7 or Windows 8 OS?
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Macbook mini-DVI - DVI - HDMI not working with My 32" Vizio

Okay so my Macbook mini-DVI - DVI - HDMI is not working with My 32" Vizio. I've connected an 18 pin plus one slot DVI to HDMI cable to my 32" Vizio HDTV, this cable is connected to my macbook via a Mini-DVI to DVI cable, this one has 24 pins plus one slot on the DVI side. My Vizio display is blue, no signal, it reads. I'm wondering if the reason it's not picking up the display is the lack of pins on the DVI to HDMI or because I dont have any display options aside from screen size and color on my display menu. BTW I hit the detect display button and nothing happened.... I know I just wrote alot here but hopefully someone will read it and come to the rescue. thanks

Oops, I guess all I had to do was restart my macbook. I feel like an idiot.....all is well.

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Iphone 6 plus wifi connection not working

I don't know what the deal is but, I'm getting notifications of emails, and messages but when I go to the app I have nothing there. The problem has expanded and now apps aren't connecting to any wifi. I thought it might have been 3rd party apps, but now even the app store cannot connect. I've tried my home wifi, and my work wifi. Using my data plan, I have no problems connecting to anything. I'm thinking this is an IOS8 issue that needs a patch. If somebody has any other suggestions, I'm all ears!

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Corporate connectivity not working for some users

Hi,
I'm having an issue that started about a month ago but is getting worse. A select group of users are no longer able to connect using DirectAccess, even though these users have been using their computers for a few months without issue.
BACKGROUND:
-Windows 2008 R2 DirectAccess server
-Windows 7 x64 enterprise clients
-Most clients experiencing the issue have a newer laptop (Lenovo T440 with Intel 7260AC wireless), but the issue is not limited to this model. Also, I have 25+ other Lenovo T440 units that connect without issue to this day.
TROUBLESHOOTING STEPS:
I have tried disabling the various interfaces used for directaccess on these problem machines and have not been able to narrow it down. Essentially- I've noticed the IP-HTTPS interface shows deactivated, so I'll disable Teredo. This
usually allows the IP-HTTPS to show activated, and connectivity is restored. However, after 30 seconds to a few minutes, connectivity will once again drop. So I'll re-enable teredo (default,client, or enterprise client) and connectivity will kick
on for another brief period, but drops again shortly after.
I have confirmed that during these short periods of connectivity working, the wf.msc shows connectivity using NTLM and Kerberos, but the clients just can't seem to stay connected on any interface.
However, in the wf.msc when the clients are not functioning, I only ever see one NTLM entry.

LOGS:
Below is a directaccess client log pulled from a non-functioning client before making any changes or any testing. Feel free to ask for the rest of the log if needed-- I have put in place holders for information that may be sensitive. Thank you!!
RED: Corporate connectivity is not working.
Windows is unable to relocationve corporate network names. Please contact your administrator if this problem persists.
24/3/2015 18:21:43 (UTC)
Probes List
FAIL PING: location-dc.domain.local
FAIL PING: location-file.domain.local
DTE List
PASS PING: 2002:'mac':5a1c::'mac':5a1c
PASS PING: 2002:'mac':5a1d::'mac':5a1d
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : c2075
Primary Dns Suffix . . . . . . . : domain.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.local
domain2.ad
System Quarantine State . . . . . : Not Restricted
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2
Physical Address. . . . . . . . . : 2A-B2-BD-'mac2'-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 2A-B2-BD-'mac2'-E6
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 28-B2-BD-'mac2'-E9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : attlocal.net
Description . . . . . . . . . . . : Intel(R) Dual Band Wireless-AC 7260
Physical Address. . . . . . . . . : 28-B2-BD-'mac2'-E5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2602:304:'mac3':d370:5a1:c77:834:86a9(Preferred)
Temporary IPv6 Address. . . . . . : 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'(Preferred)
Link-local IPv6 Address . . . . . : fe80::5a1:c77:834:86a9%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.86(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, March 24, 2015 1:48:21 PM
Lease Expires . . . . . . . . . . : Wednesday, March 25, 2015 1:48:21 PM
Default Gateway . . . . . . . . . : fe80::21b:5bff:febf:4f21%12
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : domain.local
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I218-LM
Physical Address. . . . . . . . . : 28-D2-44-C5-24-59
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.attlocal.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : attlocal.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : iphttpsinterface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FD31098B-E475-49A1-9AFA-8C43FF928F97}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.domain.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:'mac':5a1c:342d:25dd:b4e1:12c8(Preferred)
Link-local IPv6 Address . . . . . : fe80::342d:25dd:b4e1:12c8%18(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{E1BE09BA-B38B-4F87-8893-E3D32A88EDFC}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0C04B587-7861-4D8D-9DA9-6326AB71D701}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int teredo show state
Teredo Parameters
Type : client
Server Name : 204.16.90.28 (Group Policy)
Client Refresh Interval : 30 seconds
Client Port : unspecified
State : qualified
Client Type : teredo host-specific relay
Network : unmanaged
NAT : restricted
NAT Special Behaviour : UPNP: No, PortPreserving: Yes
Local Mapping : 192.168.1.86:55842
External NAT Mapping : 75.30.237.55:55842
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int httpstunnel show interfaces
Interface IPHTTPSInterface (Group Policy) Parameters
Role : client
URL : https://uag.webdomain.com:443/IPHTTPS
Last Error Code : 0x0
Interface Status : IPHTTPS interface deactivated
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh dns show state
Name Relocationution Policy Table Options
Query Failure Behavior : Always fall back to LLMNR and NetBIOS
if the name does not exist in DNS or
if the DNS servers are unreachable
when on a private network
Query Relocationution Behavior : Relocationve only IPv6 addresses for names
Network Location Behavior : Let Network ID determine when Direct
Access settings are to be used
Machine Location : Outside corporate network
Direct Access Settings : Configured and Enabled
DNSSEC Settings : Not Configured
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh name show policy
DNS Name Relocationution Policy Table Settings
(ENTRIES OMITTED TO SAVE SPACE)
Settings for .domain.local
Certification authority : DC=local, DC=domain, CN=HDT CA
DNSSEC (Validation) : disabled
DNSSEC (IPsec) : disabled
DirectAccess (DNS Servers) : 2002:'mac':5a1d::'mac':5a1d
DirectAccess (IPsec) : disabled
DirectAccess (Proxy Settings) : Bypass proxy
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh name show effective
DNS Effective Name Relocationution Policy Table Settings
(ENTRIES OMITTED TO SAVE SPACE)
Settings for .domain.local
Certification authority : DC=local, DC=domain, CN=HDT CA
DNSSEC (Validation) : disabled
IPsec settings : disabled
DirectAccess (DNS Servers) : 2002:'mac':5a1d::'mac':5a1d
DirectAccess (Proxy Settings) : Bypass proxy
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh int ipv6 show int level=verbose
Interface Loopback Pseudo-Interface 1 Parameters
IfLuid : loopback_0
IfIndex : 1
State : connected
Metric : 50
Link MTU : 4294967295 bytes
Reachable Time : 40000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : disabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection Parameters
IfLuid : wireless_0
IfIndex : 12
State : connected
Metric : 25
Link MTU : 1472 bytes
Reachable Time : 1101000 ms
Base Reachable Time : 1805000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 64
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.attlocal.net Parameters
IfLuid : tunnel_4
IfIndex : 22
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 27500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection 2 Parameters
IfLuid : wireless_5
IfIndex : 15
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 24000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface iphttpsinterface Parameters
IfLuid : tunnel_5
IfIndex : 17
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 31500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : enabled
Other Stateful Configuration : enabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Local Area Connection Parameters
IfLuid : ethernet_6
IfIndex : 11
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 31500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface 6TO4 Adapter Parameters
IfLuid : tunnel_6
IfIndex : 19
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 39500 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : disabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{FD31098B-E475-49A1-9AFA-8C43FF928F97} Parameters
IfLuid : tunnel_7
IfIndex : 21
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 33000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.domain.local Parameters
IfLuid : tunnel_8
IfIndex : 39
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 36000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Bluetooth Network Connection Parameters
IfLuid : ethernet_9
IfIndex : 14
State : disconnected
Metric : 50
Link MTU : 1500 bytes
Reachable Time : 17000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Wireless Network Connection 3 Parameters
IfLuid : wireless_9
IfIndex : 16
State : disconnected
Metric : 5
Link MTU : 1500 bytes
Reachable Time : 17000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 1
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface Teredo Tunneling Pseudo-Interface Parameters
IfLuid : tunnel_9
IfIndex : 18
State : connected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 14500 ms
Base Reachable Time : 15000 ms
Retransmission Interval : 2000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : enabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : enabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{E1BE09BA-B38B-4F87-8893-E3D32A88EDFC} Parameters
IfLuid : tunnel_10
IfIndex : 20
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 41000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
Interface isatap.{0C04B587-7861-4D8D-9DA9-6326AB71D701} Parameters
IfLuid : tunnel_11
IfIndex : 23
State : disconnected
Metric : 50
Link MTU : 1280 bytes
Reachable Time : 40000 ms
Base Reachable Time : 30000 ms
Retransmission Interval : 1000 ms
DAD Transmits : 0
Site Prefix Length : 64
Site Id : 1
Forwarding : disabled
Advertising : disabled
Neighbor Discovery : enabled
Neighbor Unreachability Detection : disabled
Router Discovery : enabled
Managed Address Configuration : disabled
Other Stateful Configuration : disabled
Weak Host Sends : enabled
Weak Host Receives : disabled
Use Automatic Metric : enabled
Ignore Default Routes : disabled
Advertised Router Lifetime : 1800 seconds
Advertise Default Route : disabled
Current Hop Limit : 0
Force ARPND Wake up patterns : disabled
Directed MAC Wake up patterns : disabled
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh advf show currentprofile
Private Profile Settings:
State ON
Firewall Policy BlockInbound,AllowOutbound
LocalFirewallRules N/A (GPO-store only)
LocalConSecRules N/A (GPO-store only)
InboundUserNotification Enable
RemoteManagement Disable
UnicastResponseToMulticast Enable
Logging:
LogAllowedConnections Disable
LogDroppedConnections Disable
FileName %systemroot%\system32\LogFiles\Firewall\pfirewall.log
MaxFileSize 4096
Ok.
C:\WINDOWS\system32\LogSpace\{05471C14-7140-4651-84C2-230EC7D70628}>netsh advfirewall monitor show consec
Global Settings:
IPsec:
StrongCRLCheck 0:Disabled
SAIdleTimeMin 5min
DefaultExemptions ICMP
IPsecThroughNAT Never
AuthzUserGrp None
AuthzComputerGrp None
StatefulFTP Enable
StatefulPPTP Enable
Main Mode:
KeyLifetime 60min,0sess
SecMethods DHGroup2-AES128-SHA256,DHGroup2-AES128-SHA1,DHGroup2-3DES-SHA1
ForceDH No
Categories:
BootTimeRuleCategory Windows Firewall
FirewallRuleCategory Windows Firewall
StealthRuleCategory Windows Firewall
ConSecRuleRuleCategory Windows Firewall
Quick Mode:
QuickModeSecMethods ESP:SHA1-None+60min+100000kb,ESP:SHA1-AES128+60min+100000kb,ESP:SHA1-3DES+60min+100000kb,AH:SHA1+60min+100000kb
QuickModePFS None
Security Associations:
Main Mode SA at 03/24/2015 14:21:44
Local IP Address: 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'
Remote IP Address: 2002:'mac':5a1d::'mac':5a1d
Auth1: ComputerCert
Auth2: UserNTLM
MM Offer: None-AES128-SHA256
Cookie Pair: 9398e38420480425:51071d5bae9eb503
Health Cert: No
Quick Mode SA at 03/24/2015 14:21:44
Local IP Address: 2602:304:'mac3':d370:f9ce:db89:87ad:'mac4'
Remote IP Address: 2002:'mac':5a1d::'mac':5a1d
Local Port: Any
Remote Port: Any
Protocol: Any
Direction: Both
QM Offer: ESP:SHA1-AES192+60min+100000kb
PFS: None
Thanks again,

Mini DVI-Adapter Not Working

Today I went to the Apple Store and got myself one of those fancy new Mini-DVI to DVI adapters, hoping it would work with my screen at home, which I had previously running on the Mini Displayport to VGA Adapter on my original MacBook.
Strangely, when I plugged the cable into the adapter, and into my computer, nothing happened. I did not get video on the screen, nor did my MacBook detect it. I have tried re-plugging the Mini-DVI adapter and clicking Detect Displays in the Displays Preferences multiple times, but no luck.
I have seen the screen work with DVI about a year ago, but that was on one of the original MacBook Pros. Am I better off returning this DVI adapter and instead buying a Mini-DVI to VGA Adapter?
Thanks for any help in resolving this problem.

I have a 22 inch ViewSonic that I got from a friend about a year ago. I did indeed plug the monitor directly into the adapter.
I brought my computer, adapter and cable all into the Apple Store, and they said it was all OK, but did replace my DVI adapter thinking it was probably defective. I got home, tested it on my monitor, but still not working. I tested it on a newer HP monitor that's on the family computer, and oddly it worked there.
A bit of research revealed that the adapter did not send Analog signals on DVI anymore, which confuses me, since the MacBook actually does have Analog signals on that port. I brought my DVI adapter in original packaging in to the Apple store again, and they replaced it with a VGA adapter for free, and sure enough, that solved the problem for me.
Lesson Learned - don't use DVI with older monitors, stay with VGA.
Message was edited by: theocas

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

DVI cable not working, but VGA one will. Graphics card problem?

Ok so. I have a Mac Pro with ATi 1900XT card. Was using a Samsung LCD for a while, via a DVI-VGA adapter. Works fine. Two days ago, I attached another monitor, a DGM, to the second DVI port using a DVI lead; the one supplied with the monitor. Everything worked fine.
Then today, I tried the same thing, but the second monitor only works at one particular resolution; 1280x800 or something. And the picture is a bit crappy. So, I tried with only the DGM monitor plugged in the first DVI port. Apple symbol at start up, and then just a black screen.
Swapped over to a VGA lead, and everything works perfectly again.
So, is the problem with the cable, the monitor, or the graphics card?
Maybe the cheapo cable is just not very good? But why it works only at one resolution? Weird. And it did flicker on at a couple of other resolutions, but went off again. And even at the one resolution it worked at, there was a secondary 'mirror' image of part of the screen, at one side of the screen.
Very strange, considering it worked perfectly before.
Oh, and I upgraded the Mac Pro's firmware yesterday. Could this have anything to do with things?
Weird...

itexpress wrote:
Forgot to add, we are running XP. We tried a different monitor and now at least we can get one monitor working via the display port. But when we try two monitors at the same time, the 2nd monitor on display port is not detected. How do we disable built in LCD on the X201 ? Lenovo support says its a BIOS setting ? That doesnt sound right to me...
Are you trying to use a DVI Splitter? I do not think that a DVI Splitter would work with a Single Link Displayport TO DVI Adapter. I do not think a Dual Link Displayport To DVI Adapter would work with a DVI Splitter.
I think that you might need something link this.
http://us.startech.com/product/SP123DP2DVI-Triple-Head-DisplayPort-to-DVI-Multi-Monitor-Adapter
Not sure, if the x201can handle 3 monitors in this fashion. StarTech.com says the GPU determines the support according to the youtube video.
It is pretty expensive,and it would be nice to know the limit.

DVI connections not working

Similar Messages

Maybe you are looking for