DVI connector

1.Is the DVI connector on my PB mimi-DVI or DVI-D and what is the difference?
2. Which one do I need to connect my PB to my HDTV that has hdmi connectors?
Message was edited by: Olemacr

You can find the specs for your system at http://support.apple.com/specs/#powerbook . I think you'll find that PB 15" came with a DVI connector, not mini-DVI.

Similar Messages

How to connect Apple TV's HDMI to HDTV's DVI connector?

My TV is equipped with DVI and VGA connector, the issue is how to link Apple TV's HDMI with my TV? DVI connector is for video only!! or I have to link apple TV's HDMI to VGA connector?

Apple TV only supports HDMI so there is no guarantee with converters. You may also run into issues with HDCP

Clear enclosure 23" cinema display with DVi connector?

Hi all,
I went to a local Mac store (Not Apple) where I was shown a supposedly 23" HD cinema display (clear enclosure) with a DVI CONNECTOR directly built in. I was under the impression that all clear enclosure versions natively came with the ADC connector and that if DVI was warranted, a converted was necessary. To my surprise, Apple apparently made two clear enclosure versions, both ADC and DVI. I've verified under the spec. area of this site. But, there were no 23" clear enclosure with DVI, except of course, the current 23 version which is the aluminum. So, was the more likely scenario that this rep. had shown me a 22 with DVI or is there really a 23 version with DVI. I was convinced at the time myself that it was a 23 clear enclosure version with a DVI connector. I saw with my own eyes that this display did not have a converter connected and it looked like the 23 as opposed to a 22. The 22 & 23 looks so similar and can be mistaken for each other. One of the ways of identifying readily is that the 22 has the power/brightness controls near the bottom right of the casing. Could someone confirm either way. Thanks!

Hi-
I agree that the rep probably showed you a 22" DVI model. See page 8 of the 22" Cinema Display Manual for the cabling of the display.
You will see the DVI version of the Cinema Display listed in this article. The article was put out prior to the Aluminum housed ACD release.

Should I use a VGA or DVI connector?

I have recently bought a Samsung 22" LCD SyncMaster 2232BW to add as a second display to my macbook.
I have the choice to hook it up through the VGA or DVI connector. At present im using the apple mini DVI to VGA connector and the quality looks good. I was wondering if I were to swap it over to DVI whether or not I would see an marked improvement.
I would like to know the pro's and cons of both VGA and DVI and whether it's worth swapping my apple VGA connector for the apple mini DVI to DVI and using the DVI cables also supplied with the monitor.
Thanks for any advice you might be able to offer.
Message was edited by: Monkeypuzzle

That's why I love this Discussion Forum: most of the time this first time and somewhat always slightly intimidated Mac owner can get any question I have about my Mac answered.
I just replaced my 19 inch dead lcd with a 22-inch Westinghouse L2210NW. ok, not the most recognizable name in the industry, but specs are good, and price at Best Buy ($229.), I couldn't resist. Bought an additional 3 yr service policy(29.99) figure I'm covered for 4 years-much better than the 14 month old 1 year warranty monitor I just replaced.
wow. Out the box, couldn't be more wow'd. Colors are brilliant, size is huge! This monitor does have DVI>VGA and
I am using the Mac DVI ->VGA adapter/connector. A few reviews I have read about this monitor stated changing to DVI even more impressionable-I can't hardly imagine. SO: Please advise or confirm: I need only replace the cable/vga came with the monitor: out the box it readily plugs into the white adapter at the back of my Mac Mini. So my new DVI cable should plug directly into my Mac, not needing the converter? Can you give me a ball-park figure on what this new cable should cost. And finally, it is worth it?
thanks for any input, and as always, your time!
Sandy

Mini DVI to DVI connector not right for my PC disply with 15pin input.

Hi Guys
I'm trying to attach my macbook to a PC monitor that has a 15 pin connector and I can't find the right cable. I just bought myself a mini DVI to DVI connector but realised that its not the right one !! Anyone know what I should be ordering ?
Thanks so much
Anna
ps DVI-I and DVI-D mean what exactly

Since you say it's a 15pin connector, it sounds like you need the Mini-DVI to VGA.
DVI connector:
VGA connector:

Mac Pro Compatibility With Older SATA Drives And DVI Connectors

I soon plan to replace my 5 year old G5 with a new Mac Pro and need two questions answered so that I will know what options i have for the transfer of older data and apps. The Apple web site for the Mac Pro includes the following paragraph which gives me reason for concern:
Your Mac Pro includes four drive bays, allowing you to configure it with
up to 8 terabytes of storage using 7200-rpm Serial ATA 3Gb/s drives, up
to 2 terabytes of storage using high-performance solid-state drives, or
any combination of each type of drive. Configure each drive bay
separately.
Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
I currently have two internal SATA 250/300 GB Maxtors (Maxtor 7Y250M0 and Maxtor 6B300S0... both are 7200 RPM but I don't know the data transfer speed). Ideally I would get a Mac Pro with a single 1 TB drive, move one or both of these older SATA drives to the new computer, one temporarily and the other permanently in order to transfer data and Apps to the new machine. If this is not possible then the new machine will need to wait until after I get a new larger FW external drive to use as a data transfer medium (I had planned to do that anyhow). I need to do some advance planning for this so I need to know what to expect in advance. I noticed this possible wording ambiguity on Apple's description of the Mac Pro long ago, but now I need to find out the answer for sure. Apple, you need to be more specific with your words.
Can anybody answer this question for me?
My second question regards display connectors. Does the standard (no bucks added) display card include a standard DVI connector or only the newer Mini-DVI connectors. I think I see a standard DVI connector in the low res picture of the back of the Mac Pro but am unsure. My 5 year old Apple display bit the dust a year ago and I had to replace it with an HP 2009m display (mumble grumble) which does use a standard DVI connector. A new Apple display is too rich for my blood so I plan to continue using the HP display for now and need to find out if I will need a display adapter to go with it.
Many thanks to anyone who can answer these questions authoritatively.
For anyone who asks why I still run 10.3.9 on my G5, I can only answer response speed. New OS versions always act like a lead anchor on a machine with their added overhead and Tiger really does feel like a ball and chain tied to me... it just does not reaspond as fast as I do. I look forward to the speed of a new machine.
Phil Rogers
--

Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
Any commercial sATA drive will do just fine. 7200 RPM is not a requirement.
WD "Green" drives have caused user complaints about "long delay until ready" when installed inside a Mac Pro, but are fine for backups.
You are making the leap from PowerPC to Intel Mac. Eventually, you should re-initialize your old drives to GUID partition table for best responsiveness.
Migrating your System will not be possible. Use the pre-installed System or Install a new System on a GUID-partitioned drive with the release DVD in the box.
Migrating your Applications is a Bad Idea. You should plan on re-installing all your third-party Applications from their release discs.

ADC to DVI connector cable - 2 for 1?

Will this cable enable me to run a data projector from the ADC port at the same time as the monitor attached to the DVI?
G5 Dual 2.5 Mac OS X (10.3.7)

Can I use the Belkin ADC to DVI Connector Cable to
connect one of the DVI displays to the ADC output on
the G5?
Yes.
If so, am I right in assuming that I still use the
Cinema Display power connector in addition to using
this adaptor cable?
Yes. The adapter just provides the digital video signals. You still need to plug in the power, USB, and FireWire (if needed) cables from the display
All the documentation seems to be restricted to G4s,
When the adapter came out the only ADC computers were G4s. They haven't updated the documentation, but it will work on a G5.

ADC to DVI connector

Hi,
Apologies if this is frequently asked/answered, but I find it difficult to find a completely straight answer anywhere.
I have an older Power Mac G5 with an AGP 8X Pro graphics card (with one ADC and one DVI connector).
I have just bought 2 new Apple 20" DVI Cinema Displays.
Can I use the Belkin ADC to DVI Connector Cable to connect one of the DVI displays to the ADC output on the G5?
If so, am I right in assuming that I still use the Cinema Display power connector in addition to using this adaptor cable?
All the documentation seems to be restricted to G4s, and for some reason the cable doesn't seem to be carried by the online Apple Store here in the UK.
Thanks,
David
Power Mac G5 Mac OS X (10.4.7)

Can I use the Belkin ADC to DVI Connector Cable to
connect one of the DVI displays to the ADC output on
the G5?
Yes.
If so, am I right in assuming that I still use the
Cinema Display power connector in addition to using
this adaptor cable?
Yes. The adapter just provides the digital video signals. You still need to plug in the power, USB, and FireWire (if needed) cables from the display
All the documentation seems to be restricted to G4s,
When the adapter came out the only ADC computers were G4s. They haven't updated the documentation, but it will work on a G5.

What DVI connector do I need for a MBP

what type of DVI connector do I need to get for my MBP to connect to a standard LCD projector

From the Apple Store: Mini DisplayPort to VGA Adapter

Is the mini-DVI connector patented by Apple?

Does anyone know if the mini-DVI connector is patented by Apple?

I long been puzzled with Apple's fascination with wierd video connectors. It goes all the way back to Mac IIX machines with 13 pin D connectors when everything else in the civilized world had EGA or VGA D-sub connectors. Then came a slew of 7100s and Powerbooks with odd square connectors, etc.; meanwhile the rest of the world trudged on with VGA d-sub connectors.
I can see Apple was trying to capture market back when Apple-badged Monitors were a bigger piece of Apple's business. Their old moniors had captive cords that could plug directly into their strange connectors. That's not true with the annoying mini-DVI connector - MacBooks need the adapter no matter who makes the monitor. Now it looks like there's yet another new micro-DVI connector on MacBook Air machines.
There doesn't seem to be an engineering reason for the MacBook to have the mini-DVI. There is plenty of room availavle to put in a full size connector.
I think we may be looking at patent issues. Not so much Apple trying to get greedy with their own proprietary connector, but perhaps, Apple not wanting to pay the other other peoples' royalties for the more recognizable connectors.
Itwould impact sales to have no video out connector. Apple can use its own non-royaly connector, and offload the cost of the licensed connector to only people that really need it, in the form of a dongle.
We're paying premium prices for Apple products anyway, so I don't think it would be that much extra burden for us to cough up a few more dollars to have a more compatible connector.
Anybody that's worked for an A/V department has long grumbled about Apple laptops' weird video connectors. A lost video dongle for an Apple costs at least $20, whereas a standard male/male two meter VGA cord is about $4.
I rececently bought some mini-DVI to VGA dongles at a computer retailer. The Apple brand and the house brand were both $25. The house brand cable was a little longer, but not as well made as the Apple branded dongle. I bought the Apple branded dongles, suspecting they'll be a little more durable and make more reliable contact with the mini-DVI socket after repeated uses.
Bill

DVI Connector faulty?

Hi all,
I just purchased the MacBook with the Mini DisplayPort to DVI Connector
The DVI Connector worked really well the past few days to connect my external LCD
However, today it won't connect.
When the adapter (with the cable attached) is plugged into the MacBook, MacBook's screen flashed to the blue colour to indicate a new display (just like normal). However, there's no video on the screen.
I tried resetting the PRAM and it didn't work.
If this is what I had to experience from a brand new piece of adapter that cost so much, I am very disappointed.
Cheers!

Mine does exactly the same thing most of the time, but every once in awhile it will output to my Acer 22" LCD monitor at a fixed resolution of 1024x768.
When I click "detect displays" in system preferences to fix the problem, this process turns the signal to the Acer off and reverts to the MacBook's internal display.
This setup has worked in the past at the LCD's native 1680x1050 resolution with my old MacBook and the miniDVI to DVI adapter, so it must be something wrong with the new integrated graphics card or the new adapter.
I spent an hour on the phone with Apple yesterday and the issue has been escalated to engineering. The agent on the phone suggested that I run the Apple Hardware Test, but unfortunately, the version of the test that ships with these on the OS disc is not compatible with the new computers and will not run.

Displayport for macbook - dvi connector

Hey everyone,
When I purchased the latest MBP, I also purchased a mini displayport to dvi adapter. (Model A1305)
I am trying to find out whether or not this adapter is defective, or if I have the wrong type of female connector.
My monitor dvi cable would plug into the bottom dvi connector here:
http://www.datapro.net/images/1145-B.jpg
What is "missing" on my apple adapter are the holes seen on the right side of the bottom adapter.. the ones that fit pins around the flat incision. Does anybody here know if I simply have the wrong type of adapter? There are actually tiny incisions where the pins should fit, but I don't know if those came from any pressure I might have applied.
Thanks for any info.
- Julian

Hey,
thats the thing, http://en.wikipedia.org/wiki/DigitalVisualInterface#Connector
Mine is like the DVI-D Dual link, so the pins on my monitor's vga to dvi adapter (yes, i could have just gotten an apple dp to vga in the first place- but regarding the monitor adapter i'm talking about an adapter on the monitor cable here, not the apple piece), don't have pins to fit in on the right side. I guess I simply didn't read into this enough before I bought it.
"http://en.wikipedia.org/wiki/DigitalVisualInterface#Connector"
Thats what I can't figure out... the connector has tiny incisions, but they are WAYY too small to fit pins. I can't figure out if I made them myself by applying pressure when the connector wouldn't fit. Thats what I want to find out; if this adapter is defective somehow. My adapter seems like it would fit on a DVI-I Dual liNK.
Message was edited by: Juliancheh

DVI connectors too big to connect dual monitors

I have an Nvidia FX3400 video board with dual DVI inputs. The inputs are physically too close together to connect two Apple monitors, apparently because Apple put a big white plastic housing around their DVI connectors which makes them bigger than standard spec. I've read a couple of solutions, including cutting down the plastic with a file. That's not a very elegant solution. Also, Apple seems to offer a little adaptor to solve the problem if you buy the computer and monitor from Apple. Seems Apple should supply these little pigtail adapters for free to those of us they inconvenienced over with their out-of-spec design.

i agree, that is pretty silly.
don't know how many computers you have, but there are some dual DVI KVMs out there that might help you with this, IF you had any use for a KVM in the first place, since then you would be able to use standard DVI cables from the KVM to the card.

Cinema Display DVI connector replacement.

I was wondering if it were possible to get the DVI connector on my 20" Cinema Display replaced, 2 of the pins on the connector have been broken off . Does apple offer this service?

What kind of Macbook Pro do you have? The Retina Macbook Pro needs a different magsafe. If you have the retina Macbook Pro, you can buy the Magafe 2 adapter.
http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =5a

DVI connectors are different

I have a G5 power MAC with a 23" cinema display, connected to the DVI connector on the left (as viewed from the back).
I just purchased a nice 19" no-name monitor that has a DVI port (as well as a VGA connector) at a great price and purchased a 5' extension so that it could reach the PowerMac. WoW, now I can have my application spread accross 2 displays---BUT , I see that the other DVI connector is DIFFERENT!!. It has a bigger shell and does not use screws to secure it and the dvi cable will not connect! What gives??? Other than that, the connector looks the same.
Is this for a special type of monitor???, do i need an adapter??
Thanks

The other one you're seeing is Apple's proprietary ADC connector (which they no longer use). You'll need to find an ADC to DVI connector (or an ADC to VGA connector) to use your other monitor.

DVI connector

Similar Messages

Maybe you are looking for