DVI-D Cable include in package

Hi tech support,
This is Hanoi in Vietnam.
Last week I bought HP Monitor 2011x (20inch LED Monitor).
When I opened package, it was not include DVI-D cable.
Shop member said , when they got it from distributor, cable already not include.
So now I want to confirm.
When I bought 2011x in Vietnam, DVI-D cable not include in package ?
Thanks,

Hi,
The following items should be in the box:
HP Monitor
External power supply (36-40W)
AC power cord
DVI-D cable
VGA cable
Cable management clip
CD (includes U.G., warranty, drivers)
Service phone list card
Hard copy warranty booklet (country specific)
Additional Signal Cables in selected SKUs
You may want to show them the following link:
   http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/382087-382087-3284302-215012-215012-3884696-5034312.ht...
Chúc vui vẻ và thành công.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Just ordered a Mac Pro MD770LL/A. Is there a DVI-D cable included?

    I just ordered a Mac Pro MD770LL/A. Is there a DVI-D cable included? I have a Sony monitor with a DVI-D input so I assume I would need a DVI-D to DVI-D cable. Is this correct? Thanks.

    The assumption is that the required cable is shipped with your display. Many displays have traditionally used a captive cable that is not removeable.
    If your display is wider than 1920 wide, you will need a "Dual-Link" DVI cable. Dual-link means that the data lines are doubled to support wider displays -- it has nothing to do with Dual Displays.

  • Mac mini HDMI to DVI adapter cable

    The new Mac mini comes with a HDMI to DVI adapter cable. Typically these (Apple) adapter cables are also available for sale separately however at the moment no other Apple device (if one ignores the Apple TV) would need this cable and as every 2010 Mac mini already includes the cable it is it seems not listed on the Apple store.
    As I am interested in getting more of these adapter cables, does anyone know if there is an Apple part number for them, or even an Apple service part number?

    Be careful what you read and with your answers. The OP is inquiring about an HDMI to DVI adapter, not a DVI to HDMI adapter. They are two very different devices! Although HDMI and DVI are electrically equivalent, some adapters work in only one direction, so you cannot always just turn it around and run it the other way.
    John, there are HDMI to DVI adapters available from 3rd parties. Be careful that it has a return policy and a warranty. Some adapters are not to the standard and are not functioning as expected. I have been happy with Monoprice products, but have no experience with this particular adapter that you seek.
    Currently the Apple Store has two Belkin adapters. If Apple sells it, it usually works well.
    http://store.apple.com/us/search?find=HDMItoDVI&mco=MTA4NDUyNzc
    Dah•veed

  • No signal message - Mac Mini - Samsung P2370HD - DVI-D cable

    I just received my new Mac mini and want to connect it via DVI-D cable to my existing Samsung P2370HD monitor. I have a DVI-D to mini-DisplayPort adapter connected to the Mac Mini and then a long (3-5 ft) DVI-D male to DVI-D male cable connecting the adapter to my monitor. I have checked all connections but the monitor is giving me a "No signal" message. When I unplug the cable from the adapter, the monitor gives me a "Check signal cable" message, so it seems as if the signal is not making it through the adapter to the TV.
    Can anyone offer advice? I really don't want to pay for a new monitor.

    My brain finally kicked in, and I was able to get the monitor to work by using the mini-DVI to DVI cable included with the Mac Mini and connecting that cable to my DVI-D (male to male) cable. I am now getting a signal to the monitor. Guess I will be returning the Dual Link DVI to Mini Displayport adapter as it was not cheap!

  • Mini-DVI extension cable?

    Has there ever been such a thing as a mini-DVI extension cable?
    I use an external monitor with my MacBook, so I have to use the mini-DVI to VGA adaptor. The problem is that I now have this big bulky VGA connector sitting on my desk just to the left of my MacBook.
    I figured that I would simply go buy a mini-DVI extension cable that would allow me to get the VGA connectors off of my desk. However, I have searched all over the Internet and found that such a cable does not exist.
    The only thing that comes close is a 1.8 meter Male-to-Male mini-DVI cable available from shentec.com (http://www.shentech.com/apmitomimato.html). But of course I need a Male-to-Female cable.
    Since the mini-DVI connector is primarily only used by Apple, it would be nice if Apple would build and sell mini-DVI extension cables in 2 or 3 varying lengths.

    Dang...
    I tried to see if CablesToGo could make a mini-DVI extension cable and this was their reply:
    {quote} +"Unfortunately we cannot build a cable like that. It is an Apple proprietary connection that we cannot obtain.+
    +We apologize for any inconvenience. "+{quote}
    I'll have to try some other companies...maybe newertech.com and Dynex. Anyone know of other companies that could make this cable?
    Pictures
    http://img176.imageshack.us/img176/9297/minidviadaptercr2.jpg
    http://img441.imageshack.us/img441/5157/minidviextensionsf3.jpg

  • Monitor does not come out of sleep Mac-Mini Mini-DVI to Dual  DVI-D cable

    I have an August 2009 Mac-Mini that I'm using with an Apple supplied Mini-DVI to DVI adapter along with a DVI-D Dual Link Cable connect to a Sceptre X7XV-Naga+ LCD monitor.
    The monitor is going into sleep mode on its own with no way to disable this feature on the monitor itself. I've disabled sleep mode on the Mac-Mini in the power setting in System Preferences.
    When in sleep mode and I move the mouse or press a key, the monitor will not come out of sleep mode. From other posts, I read that the issue might be that I wasn't using a Dual-Link DVI-D cable, so I bought one and installed such a cable. That has not resolved the problem. The monitor will not come out of sleep mode. When I have the monitor connected with a mini-display port to VGA adapter instead of a DVI-D cable, it will come out of sleep mode every time.
    Message was edited by: Annorax64

    I know it's a year later, but I'm not finding much through search.
    I have the same exact problem.  Difference being I'm using an iMac with 10.7.5.
    Same video board and monitor - ATI Radeon HD 6750M video card connected via DisplayPort to Samsing S24A850DW.
    I've tried two different mini-DisplayPort to DisplayPort cables and no change.
    I think I read that 10.8.3 might fix the issue.  Anyone that can confirm that, or has another solution?

  • New 2012 Mac mini having screen resolution problem when I connect to either 27" LG or 22" Hannspree monitor. Tried mini display port to VGA/HDMI and HDMI to DVI-D cables... all same isse

    New 2012 Mac mini having issues in connecting to third party Monitors. Connected my mac mini to a 27" LG monitor. Text looks blurred. Tried connecting to the monitor using 3 options. 1) mini port to HDMI, then HDMI cable to LG monitor. 2) Mini port to VGA, then VGA cable to monitor 3) HDMI port on mini mac to DVI-D cable then DVI to DVI cable... In all cases text is not clear. Anyone has similar issues with latest mini mac. The monitor works fine when I connect to a windows 7 Samsung laptop. Any input is highly appreciated. Thanks in Advance

    Why do you use always 2 cables? There's a lot that can go wrong.
    1.) Hardware:
    - Use only one cable, best an HDMI->HDMI cable. It doesn't need to be an expensive one, they've proven to be no worse than those "esoteric", expensive ones.
    - Set the monitor to the HDMI input.
    - The modes you are listing are only "picture modes" changing color/brightness/contrast settings, not resolution or the likes, so pick the one you like best later, or enter your own settings under Custom.
    2.) OS X:
    - Usually the Mac detects the screen itself and chooses the best settings, so by default you need to do nothing than make a proper hardware connection to get a decent image.
    - However, there have been issues with new Mac Minis and particularly their HDMI ports. But reportedly they have been fixed with a software update. So, launch the App Store and check under Updates if there is one for you to install. If so, do it; otherwise you should be good to go.
    - If you require, go to System Preferences -> Displays. In the Dispaly tab, by default, "Best for display" should be selected, and that is typically true. If you want, select "Scaled" and 1920x1080, plus a frequency from the list (where higher is usually better, but just pick the one that works best for you). If you can't see a change to the better, you best go back to "Best for display".
    - If you are not happy with the colors on your screen, you'll find eventually more than one choice in the Color tab, though your particular screen should be in the list and its Display Profile should get you the best result. (Double-check picture modes on your display: if you're far off there, you won't make it much better with the Mac's settings).

  • I am trying to connect my ipod classic to a tv and have tried many cables including the Apple composite AV cable.  No success.  Any thoughts?

    I am trying to connect my ipod classic to a tv (sony bravia 1080p) and have tried many cables including the Apple composite AV cable with the 30 pin connector on one end and three RCA connectors on the other.  Audio works but video does not.  The ipod classic screen says to connect to device when it is already connected. No success.  Any thoughts?

    Hello, anabelleho. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    Jason H.

  • Using a DVI HDMI cable with my Sharp Aquos LC-52D62U 1080p

    Hello
    I have a Mac Mini Intel proc with 4GB RAM (max RAM).
    I'm trying to get it to work with my Sharp Aquos LC-52D62U 52" TV. The TV supports 1080p native, and the mini has had no issues connecting to this TV before. I just re-installed 10.6 (with all updates) and it does not want to connect.
    I have a direct DVI > HDMI cable going from the Mini directly to the back of the TV. I tested other devices on that TV input and the TV works fine. I'm also convinced that the cable is fine as it worked before the re-install of the system.
    I can see the Mac Mini using screen sharing on my Mac Pro, so I can make changes to the configuration over the network. The screen settings on the Mini are set to "1080p (Television)" just like they were when it all worked fine. But the TV screen is black. No picture at all.
    What can I do about this?
    Thanks,
    -----------S

    Hello Mac Mini world. I tried to connect my new Mac Mini to a 2 year old 32" Insignia Flat Screen HDTV through HDMI for hours however there was always part of the screen cut off even after adjusting both the resolution ratio on TV and Mini. After 3 calls to Insignia TV and Apple Support nobody had a definitive solution for me and was mainly told to live with it! One person from Applecare did half heartedly suggest trying a VGA connection instead in spite of lower quality. I went to the MAC store and they were confused as were the people at Best Buy but I reluctantly bought the MINI VIDEO PORT CABLE + VGA CABLE at Best Buy and to my surprise IT WORKED AND LOOKS PERFECT and automatically adjusts to fit any setting of computer resolution LIKE MAGIC. I have never posted but this seemed like good info as I read through a lot of blogs yesterday trying to resolve this issue. AGAIN THE SOLUTION IS TO TRY THE VGA CONNECTION. -chuck

  • Using DVI - HDMI cable output to Samsung LCD TV

    For some reason, i have been using the DVI -> VGA Adapter with a VGA cable outputted to my new Samsung LCD TV, with resolution 1920x1080. I purchased a DVI -> HDMI Cable, but the quality/resolution is subpar to using the VGA Cable, it seems as if the resolution is upscaling itself, but according to Display Preferences, it is outputting at 1920x1080i, When i'm using the VGA cable it just says 1920x1080, without i or p.
    Anyone know why?

    I've been trying to communicate with a Samsung LE40A656 via a DVI-HDMI cable.
    I think there must be issues with HDMI on that model because the TV can't detect a signal on the HDMI port and the MPB can't see a monitor.
    But I have managed to get full screen via the Apple DVI-VGA adaptor and the D-sub port on the Samsung using the specification in this archive thread:
    http://discussions.apple.com/thread.jspa?messageID=6400626&#6400626
    Before I upgraded my TV I had a cheap(ish) Hyundai Vuon with a DVI port which worked fine with my MBP.
    Would still like to know why HDMI doesn't work on the Samsung.
    Adrian

  • ADC to DVI connector cable - 2 for 1?

    Will this cable enable me to run a data projector from the ADC port at the same time as the monitor attached to the DVI?
    G5 Dual 2.5   Mac OS X (10.3.7)  

    Can I use the Belkin ADC to DVI Connector Cable to
    connect one of the DVI displays to the ADC output on
    the G5?
    Yes.
    If so, am I right in assuming that I still use the
    Cinema Display power connector in addition to using
    this adaptor cable?
    Yes. The adapter just provides the digital video signals. You still need to plug in the power, USB, and FireWire (if needed) cables from the display
    All the documentation seems to be restricted to G4s,
    When the adapter came out the only ADC computers were G4s. They haven't updated the documentation, but it will work on a G5.

  • No Native Res with DVI/HDMI but OK with DVI/VGA cable on Loewe 32" LCD

    Hi there, I am a little confused about connecting my mini to my Loewe Individual LCD TV and coudl do with some help.
    I purchased a DVI to HDMI cable at enormous cost because my experience of DVI versus VGA is like night and day and I wanted to have the best possible connection to my HD TV.
    The problem is that when I connect the mini with the DVI/HDMI cable the native resolution of my TV is not available. (1366x768 or thereabouts) The only resolutions to choose from are 1920 x 1080? and 1024 X 768. Using overscan on the 1024 fills the screen correctly but looks all stretched.
    Instead I connected with a VGA cable and the correct resolution is automatically detected immediately and there is no problem at all.
    I am a little bit confused as to why it works fine with VGA but not with DVI/HDMI. The VGA connection looks OK but why compromise when you shoudln't have to?

    First of all, I am far from an expert but as I said, from my experience and after reading a LOT, HDMI cannot support 1366x768, that is why the TV goes without picture if you try. Why? I don't know.
    Now, DVI is almost like VGA, both are analog, and can support 1366x768 or 1920x1200. But since you go from DVI output from the Mac Mini to the HDMI cable, screen goes black, blue, etc, res no supported.
    That is why some people don't have problems with the powerbook and their HDTV's, and then they try with the DVI-HDMI adaptor (normally with the mac mini) and it's no good.
    The thing is, you can get 720p, 1280x720 but with overscan, so with DisplayconfigX you go from:
    1280x720 (720p)
    128 Front Porch 10
    80 Sync 5
    200 Back Porch 15
    1688 Total 750
    to
    1240x680
    128 Front Porch 19
    80 Sync 5
    240 Back Porch 38
    1688 Total 750
    for example, with this setup you get the image cut to a minimum.
    As you can see the totals are in both cases 1688 750. As soon as you don't respect this totals, like in this example:
    1366x768
    28 Front Porch 5
    80 Sync 5
    40 Back Porch 15
    1514 Total 793
    your TV won't be able to dispay the image. But with VGA the totals don't matter!!!!, that is why it works with one cable and not with the other.
    Apple should update the Intel graphic card drivers, maybe that would help.
    Bye
    Mac Mini   Mac OS X (10.4.5)  

  • DVI splitter cable on 2 monitor setup

    I set up my G5 with 2 monitors utilizing both ports on the graphics card. I want to add a Wacom Cintiq tablet which has a video display and am wondering if I can split the second port with a DVI splitter cable so I can have display on monitor 2 and the Cintiq.
    1. Will it work?
    2. Will it draw too much from the display adapter, thus causing it to fry?
    3. Has anyone done this set up themselves?
    TIA for the info!

    Hi-
    Two monitors are working the 9600 pretty hard.
    Realizing that you probably want to get by on the cheap, I can't recommend a simple DVI splitter.
    I don't think you will get satisfactory results.
    Another issue is, with any type of device that uses a single port for multiple displays, is that the two connected monitors need to support the same resolution.
    A DVI amplifier would provide the additional power and signal boost needed to run additional monitors.
    http://www.kvm-switches-online.com/gefen-dvi-splitter.html

  • Cant use DVI-D port with DVI-D cable from Pav 500-100a to HP W2207 monitor

    I have a new Pav 500-100a factory standard with no mods.  A HP w2207 monitor.
    Currently connect fine with VGA to the DVI-D port with the adapter that came with the pc.  I've setup Windows, updated to 8.1, put in my files from my old PC and all was well except video isnt that good.
    I got a DVD cable form work but its a DVI-I cable.  It took 5 mins before windows comes up and then whenever the background picture changed in the theme it hung for a few seconds.  I read that I need a DVD-D cable which i purchasd today.
    The packet says its a CL-DVI2M - DVI M/M 24+1 CABLE 2M.  The tech in the shop says its a good calbe and will work fine.
    When connected and I power up I get teh hp logo and rolling dots then it goes blank.
    I reconnect teh VGA cable and its all fine - using the VGA to DVI adapter.
    I ran msconfig and turned of safe boot - restarts and comes up fine in safe mode.  I set the resolution to 1280x800 and restarted and reconnected the DVI cable - blank again.
    If I put the VGA cable back in it boots fine.  The monitor has been factory reset and seens the DVI connection but Windows remains blank. Also tried booting first with no cable - connect teh DVI and the monitor remains in sleep - power reset teh monitor and still blank also shows no DVO conenction.
    I fI power up with DVI connected I can get to BIOS, and i see the HP logo and dots as Win 8 starts.
    I dont know what else I can try.  I have no other usable video card with DVI
    Any ideas out there?
    Pls help - Steve
    Although I am an HP employee, I am speaking for myself and not for HP.
    This question was solved.
    View Solution.

    Hi Steve,
    Only connect one active video cable to the monitor and do not use any adapters.
    Use a flashlight and examine the DVI connector on the monitor.  Which DVI type is it?
    Some of the older HP monitors have DVI issues so you might want to check with HP Support and see if you have one of those models.
    An older post a long time back indicated that audio also had to be feed to the monitor (claimed by a poster).  If this is indeed true then it's a monitor design flaw. So, you could use a native HDMI cable and test out that claim. 
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • DVI-I to DVI-D Cable?

    I have two Macbook Pros, and I have one Dell flat-screen monitor. Right now, I hook up one Macbook Pro using the VGA adapter to the monitor. When I want to use my other Macbook Pro with the monitor, I switch the cables out. I know it's a small hassle, but I have to do it frequently, so it annoys me.
    On the back of my Dell monitor, I see "Input 2", which is DVI-D. I realize I can toggle between the inputs on my monitor, so I'm thinking I can get a cable that hooks my second Macbook Pro to the DVI-D input, thus eliminating the need to switch cables out all the time.
    Unfortunately, I'm new to the whole video display thing, so I'm not sure which cable to get. My Macbook has a female DVI-I port (unless my research has been misguided). The DVI-D port on my monitor is also female. So my assumption is that I need a male DVI-I to male DVI-D cable.
    I just wanted to check with the experts on this forum before buying something that might not achieve the desired results (i.e., keeping both Macbooks constantly hooked up to the same monitor and toggling between the displays). This is the cable I was looking at:
    http://www.startech.com/item/DVIVGAYMM6-DVI-I-male-to-DVI-D-male-VGA-male-splitt er.aspx
    I realize it's a splitter, which does more than I need, but I couldn't find just a plain ol' male DVI-I to male DVI-D cable (I did look in the Apple store). Maybe I wasn't entering the right search terms into Google, though.
    Any advice? Am I on the right track here? Would it be better to get a different cable and add some sort of adapter?
    Thanks!

    All you need is a DVI-D to DVD-D cable cable. A DVI-D plug will fit in a DVI-I connector.

Maybe you are looking for