DVI - D Port not working?

Hi,
I was running my monitor using a DVI to VGA cable on the DVI-I Port, was working fine until recently i decided to add a second monitor. I got a DVI to HDMI cable for the second DVI-D port. When i plugged both in and restarted the display went out on the second monitor after the windows logo appeared. Is this a problem with the DVI-D port? Any suggestions on how to fix it. I am currently using the DVI-I port with DVI to HDMI cable plugged into my second monitor which is working fine.
I have the HP s5-1224 Slimiline tower.

From the specs:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03355381&cc=us&dlc=en&lc=en&product=5231538#N53...
it should work, as long as you don't need too many graphics power.
>When i plugged both in and restarted the display went out
Why don't you test to connect the second monitor while the pc is running?
Run the vga monitor first, then connect the second and change the monitor settings...
V.
*** Say 'Thanks' with Kudos ***

Similar Messages

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Hp 15-D018TU USB SS PORT NOT WORKS

Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in Advance

Hi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

HDMI and DVI port not working on 880GMA-E35

Hello,
I want to use the HDMI port of my 880GMA-35, but the monitor is not getting a signal. I know that the board has two jumpers to switch between the DVI and the HDMI port. In the delivery state the jumper is set to HDMI, but I don't get a signal. There is also no signal, if I switch the jumper to the DVI pins. I have tested this setup which different cables (HDMI and DVI) and two different monitors.
After this test I get a guarantee replacement of the board. The new board is also not working with HDMI or DVI. The VGA port of the first board was working as supposed and I don't see any Bios settings to activate the monitor ports.
Are there any suggestions to solve my problem?
Thanks in advance and kindly regards
Daniel

>>Posting Guide<<
please read the above guide and follow it!
firstly we need alot more information to what componants you have in your system?
eg see my signature bellow this post for the type of information we need! main parts are:
motherboard
CPU
RAM
PSU (include the +12v ampage ratings)

Second DVI Port not working?

Hi,
I just purchased a HP Pavilion Slimline s5-1224 (windows 7 home premium) and an having problems hooking up 2 monitors via the built-in DVI outputs.
I have a monitor plugged into each of the DVI ports. The computer doesn't seem to detect any monitor plugged into the lower DVI port. I've tried switching a number of times; if a monitor is plugged into the top port, it works fine; if it's plugged into the bottom port, the computer doesn't detect it. I've tried going to the "screen resolution" menu to manually detect the second monitor, but hitting the "detect" button doesn't find the second monitor.
Is there some sort of trick to get dual-monitors working with this computer?
Thanks

Sharon43,
Please provide the brand and complete model numbers for the monitors you are trying to connect to your computer. Also indicate the exact methods you are using to connect the monitors.
As your HP Pavilion p6-2310 Desktop Computer has one DVI-D (digital only) output and one VGA (analog only) output, one monitor must support VGA input and the other monitor must support DVI-D input.
(#1) - DVI-D (digital) output (#2) - VGA (analog) output
The computer and monitors will need to be connected as follows;
Computer > DVI-D cable > Monitor #1
Computer > VGA cable > Monitor #2
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Hdmi port not working on HP Pavilion g7-2240us Notebook PC

I can't get my HDMI port on my on HP Pavilion g7-2240us Notebook PC to work... Can someone please help me? (it's windows 8)

This is ridiculous - the number of hits that come up for "Pavilion g7 HDMI not working" is astounding; yet finding a useful answer, or anything resembling a useful answer other than a document that instructs 4-yr olds on how to locate an HDMI port, is impossible.
HAS ANYONE FOUND A SOLUTION TO THIS? Or is this a rampant model-wide issue that HP would rather not acknowledge?

HDMI Port not working on Lenovo G460 Win7-64bit

I've been trying to solve this for some months now.
I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
I am sure I have taken all the trouble-shooting methods into consideration so a simple question is...
Is the hdmi port defective?
I will take my laptop into the Lenovo After Care service center this week, but before then is there anyone who has had this issue and solved it? -->or is it just a hardware problem easily fixed with warranty replacement parts.
Thank you
Solved!
Go to Solution.

::Update:: ----------> Partially SOLVED
Lenovo After Service Center Report:
1. hdmi connection is fine
They said that it could be a software problem and that they would try to update the driver.
Partial Solution:
Use Lenovo Original Drivers, for some reason NVIDIA newest drivers conflict with hdmi port on Lenovo G460 .
I restored my laptop to factory condition and tested the hdmi connection and it worked for a few seconds ...
my lcd screen started to flicker and my laptop flickers now when hdmi is connected....(A sign that hdmi is not really broken)
Will update solution when i get it to work 100%

20" Cinema display with USB and firewire ports not working

I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help please

Verify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device.

MBP CD2 DVI to VGA not working with projector

I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
Any ideas, any help, any answers?

Here are the actors in our play today
1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
4. DELL 2300 MP projector
Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
In Display preferences we see for the MBP B
Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
VGA Display
Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
This is a problem!
So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
I shut down/restarted the MBP B.
I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
Enter the iBook!
I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
iBook display prefs reveal:
Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
Color tab: Generic RGB Profile
VGA display, 1024X768, colors: Millions,
Now. I unplug adapter from iBook, iBook readjusts to native display
plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
Scene 2: The FREAKY thing!
Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
So, I plug back into iBook-projector. And the iBook works immediately again.
I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
So,
I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
Back to the good ol' iBook. Of course it works.
Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
Now switching over to MBP A- DOESN'T WORK.
As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
Any thoughts, ideas, ways to diagnose? Thanks!

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Constant freezing eventually led to mini port not working

I run bootcamp, and it happens on windows as well so it must be a hardware problem. Unfortunately my coverage is up and I'm unable to pay for anything right now.
Basically, the computer was freezing up for a while, a lot of the time it just freezes up for a couple seconds, or a few seconds at a time, and then sometimes it runs fine. Other times it will completely freeze and I'll have to do a hard shut down. Now my mini port stopped working(I was using an adapter for VGA), also both on windows and mac sides. Computer still freezes up. Just had the hard drive replaced a few months ago when it was under warranty, and it was fine until about a month ago.
Not sure what to do, I keep things pretty clean, I used to build PC's. I ran dsk chk everything was fine.
I want to open this thing up but

Thanks to whoever moved this topic to the correct place.

Apple Mini Display Port NOT working at resolutions over 1600X1200!

Problem:
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing displays on us then I won't be buying another Mac, it's just that simple.

Thanks, but I think two things may be different in that setup.
1. If I understood correctly, it's a first gen without a "Mini Display Port" and
2. It was a laptop not a Mac Pro with a video card.
I think it has specifically to do with either one or both of the above combos. In particular I think it's the video card they are putting in them.
I am not sure if a new 2009 Apple laptop with a Mini Display Port connected to a NON Apple display would have an issue or work like yours does now. It would be interesting to get to the bottom of this for sure because it REALLY hurts people like myself that are into 3D design.
I will try to get back on this once I continue to find out more details.

DVI - D Port not working?

Similar Messages

Maybe you are looking for