Dvi miniport with dvi-hdmi converter

When using my dvi miniport. I have a dvi->hdmi converter. I was wondering how I can make the sound go trough it?

Open System Preferences>Displays and make certain that you have checked the box titled 'Detect Displays'
Your TV Manual should have instructions for connecting a computer.  Some TVs have several HDMI ports.  Make certain that you have selected the correct one.
Ciao.

Similar Messages

  • DVI/HDMI converter for a Samsung TV

    Curently I have an ATI Radeon HD 5770 1024 MB on my Mac Pro, and on FCPX I manage 3 monitors (two 24" and one 22" but all 1920X1080 resolution) and all is fine.
    Now, I was thinking to sustitute the 22" one with a 32" led television Samsung which has Full HD 1920 x 1080 resolution. So all should be fine. My doubt is: Samsung TV has HDMI in, so I have to go with a DVI/HDMI converter. Could this cause any problem??

    You can get a simple cable that is DVI on one end, and HDMI on the other.  I've used these several times in the past.

  • 2008 MBP -- DVI out -- DVI/HDMI converter -- HDTV ?

    Hi guys,
    I'm gonna go ahead and apologize in advance if this has been asked before, I'm having a bit of an emergency.
    The backlight on my 2008 MBP (model A1260) has gone out -- I can still somewhat see the screen but it's extremely dim. I'm wondering if I can buy a DVI/HDMI converter and run the video out to my HDTV. Are there any extra supplies I'll need?
    Also, any instructions for enabling the HDTV as my external display would be greatly appreciated as I'm barely able to read anything on the screen in its current state.
    Thanks so much!

    From Apple's website:
    These Apple computers supply multichannel audio (up to 8 channels) and video signals over Mini DisplayPort:
    iMac (Late 2009) and later
    Mac mini (Mid 2010) and later1
    Mac Pro (Mid 2010)
    MacBook (Mid 2010) and later
    MacBook Pro (Mid 2010) and later
    MacBook Pro (Retina, Mid 2012)1
    MacBook Air (Late 2010) and later
    1No additional adapter is necessary if you are connecting directly to the HDMI port on your Mac mini (Mid 2010) and later or your MacBook Pro (Retina, Mid 2012).
    These Apple computers supply only video signals over Mini DisplayPort:
    iMac (Early 2009) and (Mid 2009)
    Mac Mini (Early 2009) and (Late 2009)
    Mac Pro (Early 2009)
    MacBook (Late 2009)
    MacBook (13-inch Aluminum Late 2008)
    MacBook Pro (late 2008), (Mid 2009), and (Early 2009)
    To connect your television or other HDMI devices to your Mac, use select third-party Mini DisplayPort to HDMI adapters that conform to the VESA DisplayPort Dual-Mode Standard. The following adapters are are known to adhere to this standard:

  • Can I use a thunderbolt display with an hdmi converter to a PC?

    I bought a Thunderbolt display, and have seen a ThunderBolt/MiniDisplay Port to hdmi converter.
    Is it possible to use a ThunderBolt display as PC display if I use this converter?
    thanks!

    Probably not.  Unlikely.  The ThunderBolt/MiniDisplay Port-to-hdmi converters are intended for connecting the thunderbolt port on an Mac to an HDMI input on a display or TV.  You can't assume these converters work backwards and without knowing exactly what converter you are talking about, and what video out your pc has ... it's impossible to say.
    I would add that one should think long & hard about risking a $1000 Apple thunderbolt display by connecting it to something it wasn't designed for.

  • Recently I bought a mini DVI to HDMI converter  from eBay for my iMac 21.5 Mid 2011, but only later I realised that it does not have the mini DVI port in that. How can I connect my iMac to a LG smart TV through a HDMI cable?

    This is the picture of all the ports from my iMac
    This is the mini DVI to HDMI converter which I bought from ebay. And I have the HDMI cable to connect it to my TV
    Could anyone please suggest me a solution how I could connect my iMac to the LG smart TV? Also I need to know if this transmits the audio as well to the smart TV?
    Suggestions are welcomed. I really appreciate and thank you for your time

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

    Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
    Thanks

    I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

  • Macbook mini-DVI - DVI - HDMI not working with My 32" Vizio

    Okay so my Macbook mini-DVI - DVI - HDMI is not working with My 32" Vizio. I've connected an 18 pin plus one slot DVI to HDMI cable to my 32" Vizio HDTV, this cable is connected to my macbook via a Mini-DVI to DVI cable, this one has 24 pins plus one slot on the DVI side. My Vizio display is blue, no signal, it reads. I'm wondering if the reason it's not picking up the display is the lack of pins on the DVI to HDMI or because I dont have any display options aside from screen size and color on my display menu. BTW I hit the detect display button and nothing happened.... I know I just wrote alot here but hopefully someone will read it and come to the rescue. thanks

    Oops, I guess all I had to do was restart my macbook. I feel like an idiot.....all is well.

  • Using a DVI HDMI cable with my Sharp Aquos LC-52D62U 1080p

    Hello
    I have a Mac Mini Intel proc with 4GB RAM (max RAM).
    I'm trying to get it to work with my Sharp Aquos LC-52D62U 52" TV. The TV supports 1080p native, and the mini has had no issues connecting to this TV before. I just re-installed 10.6 (with all updates) and it does not want to connect.
    I have a direct DVI > HDMI cable going from the Mini directly to the back of the TV. I tested other devices on that TV input and the TV works fine. I'm also convinced that the cable is fine as it worked before the re-install of the system.
    I can see the Mac Mini using screen sharing on my Mac Pro, so I can make changes to the configuration over the network. The screen settings on the Mini are set to "1080p (Television)" just like they were when it all worked fine. But the TV screen is black. No picture at all.
    What can I do about this?
    Thanks,
    -----------S

    Hello Mac Mini world. I tried to connect my new Mac Mini to a 2 year old 32" Insignia Flat Screen HDTV through HDMI for hours however there was always part of the screen cut off even after adjusting both the resolution ratio on TV and Mini. After 3 calls to Insignia TV and Apple Support nobody had a definitive solution for me and was mainly told to live with it! One person from Applecare did half heartedly suggest trying a VGA connection instead in spite of lower quality. I went to the MAC store and they were confused as were the people at Best Buy but I reluctantly bought the MINI VIDEO PORT CABLE + VGA CABLE at Best Buy and to my surprise IT WORKED AND LOOKS PERFECT and automatically adjusts to fit any setting of computer resolution LIKE MAGIC. I have never posted but this seemed like good info as I read through a lot of blogs yesterday trying to resolve this issue. AGAIN THE SOLUTION IS TO TRY THE VGA CONNECTION. -chuck

  • No Native Res with DVI/HDMI but OK with DVI/VGA cable on Loewe 32" LCD

    Hi there, I am a little confused about connecting my mini to my Loewe Individual LCD TV and coudl do with some help.
    I purchased a DVI to HDMI cable at enormous cost because my experience of DVI versus VGA is like night and day and I wanted to have the best possible connection to my HD TV.
    The problem is that when I connect the mini with the DVI/HDMI cable the native resolution of my TV is not available. (1366x768 or thereabouts) The only resolutions to choose from are 1920 x 1080? and 1024 X 768. Using overscan on the 1024 fills the screen correctly but looks all stretched.
    Instead I connected with a VGA cable and the correct resolution is automatically detected immediately and there is no problem at all.
    I am a little bit confused as to why it works fine with VGA but not with DVI/HDMI. The VGA connection looks OK but why compromise when you shoudln't have to?

    First of all, I am far from an expert but as I said, from my experience and after reading a LOT, HDMI cannot support 1366x768, that is why the TV goes without picture if you try. Why? I don't know.
    Now, DVI is almost like VGA, both are analog, and can support 1366x768 or 1920x1200. But since you go from DVI output from the Mac Mini to the HDMI cable, screen goes black, blue, etc, res no supported.
    That is why some people don't have problems with the powerbook and their HDTV's, and then they try with the DVI-HDMI adaptor (normally with the mac mini) and it's no good.
    The thing is, you can get 720p, 1280x720 but with overscan, so with DisplayconfigX you go from:
    1280x720 (720p)
    128 Front Porch 10
    80 Sync 5
    200 Back Porch 15
    1688 Total 750
    to
    1240x680
    128 Front Porch 19
    80 Sync 5
    240 Back Porch 38
    1688 Total 750
    for example, with this setup you get the image cut to a minimum.
    As you can see the totals are in both cases 1688 750. As soon as you don't respect this totals, like in this example:
    1366x768
    28 Front Porch 5
    80 Sync 5
    40 Back Porch 15
    1514 Total 793
    your TV won't be able to dispay the image. But with VGA the totals don't matter!!!!, that is why it works with one cable and not with the other.
    Apple should update the Intel graphic card drivers, maybe that would help.
    Bye
    Mac Mini   Mac OS X (10.4.5)  

  • DVI/HDMI connection for Thinkpad R61 (with IBM 2504 Docking station) and Samsung LNT4665F LCD TV

    I am trying to connect my laptop (Thinkpad R61) with my TV (Samsung LNT4665F) using a DVI/HDMI cable. Because the R61 doesn't have a DVI port, I am using it in the IBM 2504 Docking station. I have docked the computer, connected the DVI/HDMI cord (using HDMI in 1 on the TV, which I believe is the only DVI accepted HDMI on the TV). I followed the Samsung instructions to then hit "Fn-F7" on the laptop. Unfortunately, nothing is happening. It doesn't appear that any signal is pushing out to the TV.
    I am not very tech savvy. Can someone please tell me what I need to do?
    Thanks for your help.
    Brian

    lead_org wrote:
    if your R61 uses an intel GPU, then it won't support the dvi passthrough port on the dock. 
    The 14" models with intel GMA have DVI pass through.
    @ bweisy, welcome to the forum,
    Which model R61 do you have? Could post the Type and Model Number Please do NOT post your s/n.
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Display Port DVI HDMI no longer interfaces my TV with 10.7 lion.

    I have used successfully used my LG 720p tv with a Apple branded Display port --> GE branded Dvi adapter followed by a dvi --> HDMI adapter directly into my TV.
    Upon upgrading to Lion (10.7) two days ago I discoverd that my MacBook Pro no longer recongizes the connection. Both the Mac and TV initially try to interface (Macbook bluescreens, TV says connecting) I've checked all the connections and nothing seems to be broken.
    I have also tried my other Display port --> VGA adapter and this also unsuccessfully links...
    Has anyone expierenced other issues with display port functionality after the upgrade to Lion?

    I am also having a similar issue with my MBP 17" Mid 2010 and my LG tv. It flashes and tries to connect but doesn't successfully pair. Both over HDMI and VGA.
    Here's my post
    https://discussions.apple.com/message/15730208#15730208
    Sorry this is a repost, and I can't find how to delete a post.

  • DVI HDMI Poor picture quality, grainy / combing

    Hi Guys,
    Have just purchased a 26" Samsung LCD and have it connected to my G5 via a DVI-HDMI cable. However, full-screen playback on the monitor from FCP looks really poor- very grainy, with lots of combing (Note: the LCD autodetected a 50hz/1920x1080 interlace setting).
    I know FCP has this setup as a CINEMA DISPLAY PREVIEW so its not really full-quality, but even still- it looks worse than when i was using a tv attached via S-Video!
    Would anyone be kind enough to share what i might try to address the problem? i have already tried the obvious altering resolutions etc- but to no avail...it has me confused!
    Many thanks,
    Adam

    I know FCP has this setup as a CINEMA DISPLAY PREVIEW so its not really full-quality
    Yup...that's it. It isn't full quality, it is a lower resolution to ensure that no skipping of footage occurs (dropped frames).
    even still- it looks worse than when i was using a tv attached via S-Video!
    That was via firewire to a DV device, correct? Because that IS a proper FULL RES signal, so yes, it will look better. DVI out means that it is sending a COMPUTER signal, not a VIDEO signal...so the quality is worse.
    Would anyone be kind enough to share what i might try to address the problem?
    Yup...get a capture card. With a G5 your options are limited. NO Decklink Intensity with HDMI out...no Matrox MXO with HDMI out. The MXO will do DVI to a computer monitor and clean up the signal, but you can't convert that DVI to HDMI I don't think...messes up the signal. BUT, you could use the MXO and go COMPONENT to that monitor. That would be a good signal. Otherwise you are looking at Decklink HD cards or Kona LH...the Decklink might be comparable in price to the MXO.
    Shane

  • MacBook to HDTV via Mini-DVI to DVI-HDMI.

    Okay guys, here's specific question about color calibration / resolution with DVI-HDMI output from my MacBook (or maybe any machine) to my LNT-4665. I've been trolling the forums for an answer. If you know of a thread, let me know.
    The TV:
    Samsung LNT-4665
    It's a 46" with resolutions up to 1080p.
    The MacBook:
    MacBook C2D, 2GHz, 2 GB RAM, Leopard
    Outputting through to a DVI-d to HDMI cable to my HDMI2 port on the Sammy.
    The PC
    PC with Windows XP, ATI X800 GTO graphics card. The PC is not available to me and was only used for this test.
    Outputting through VGA to VGA input on the Sammy.
    Images!
    I took a bunch of photos in RAW format and converted them to .PNG. Alt-tabbing through New Windows gives you a better comparison.
    LNT-4665 via PC using VGA - Color Bars
    LNT-4665 via PC using VGA - Desktop
    LNT-4665 via MacBook using DVI - Color Bars
    LNT-4665 via MacBook using DVI - Desktop
    LNT-4665 via MacBook using DVI - Desktop with Dock
    MacBook Display - Color Bars
    MacBook Display - Desktop
    Baja 1000 Image - Original Res
    Color Bars Image - Fit for Alt-Tabbing
    Color Bars Image - Original Res
    Using Photoshop and a template I found online, I created this image. It is pixel perfect. The colors are exact RGB colors.
    Combined Comparison Image - Color Bars
    Combined Comparison Image - Desktop
    So, first of all, the resolution changes between DVI and VGA due to overscan(?). Maybe the Start Menu distorts the background image? I never fully understood how this works. Why would the picture look any different? How can I make it look the same? However, this is not my top priority.
    The big issue, as you can see, are the colors. The color difference between VGA and DVI is laughable! The MacBook Display colors look better than the TVs. The DVI colors are totally washed out.
    Am I outputting the wrong signal? Anyone know how to check that? Or.. fix it? I'd appreciate a crash course on any of this.
    On the MacBook I played with the System Preferences>Displays>Color>Calibrate settings (I've created 5 different color profiles) to no avail.

    Just to continue documenting my progress here.
    From my TV's forum thread:
    jinqui242 wrote:
    When you hook up the Macbook to the TV, it is acting as an extended desktop. I used to do this and wondered why I kept getting dropped frames and slowdown even on DVDs and DivX video. It did not fill the screen at 1080p even though Windows filled it.
    To get it to fill up the entire screen, you have to close the Macbook ("clamshell mode"), wait until it goes to sleep, then plug an external USB keyboard or mouse in to wake it up. Then it will be working in 1080p mode and should fill up the entire LCD screen. Some people don't like this because they worry about the MB overheating.
    I prefer to boot up in Windows XP on my Macbook. You can right-click on the desktop and it gives you an option to "Output to Digital Television." Then it blanks out the Macbook screen and outputs on the TV in full 1080p. The MB shell can stay open. High quality video usually runs better this way IMO. The Core Media Player is pretty good with most video files.
    This is pretty strange/frustrating. I successfully booted the computer in clamshell mode but it still doesn't fill the screen. However, I rebooted the machine in clamshell and the BOOT SCREEN filled the screen! Then it reverts back to the little screen when the desktop opens up. Ugh!
    Windows is my Plan B. Unfortunately, it requires backing up and reformatting.
    Plus, why do I have to install Windows on my MacBook in order for this to work? Totally unacceptable. Why is this so difficult?! If Apple wants to get into the home theater market this MUST be worked out. I have no interest in buying an Apple TV if I already own a MacBook that SHOULD work fine. Why would I buy an Apple TV if it turns out I have to install WINDOWS on my MacBook for it to work?!
    I hope you guys are listening.

  • DVI scan converter for under $1000?

    I've just gotten some e-mails which indicate DVI scan converters are downright expensive. Considering many DVI HD-TVs are now well under $1000, you'd think that you could get a scan converter for less. Sure there is DisplayConfigX and SwitchResX, but they are complicated to setup, and it appears not all HD-TVs respond well to them. So here's the question, anyone know of a simple DVI based scan converter that will reduce the picture so that all four sides of the screen which are overscanned on my set actually appear on my HD-TV? I don't want to have to step down to VGA just to do scan conversion. Right now the VGA scan converters are only $200 to $300 depending on where you look. Why some companies charge as much as $12,000 for DVI versions is beyond me!

    there are scan converters that do the simple job of converting a signal from 1 format to another then there are converters (scalers) that are designed to take NTSC (or PAL, SECAM, etc...) material and upconvert it to a higher resolution. back in the day when we used to deal with $50,000 9" gun CRT front projection systems, they often used $30,000 boxes that did the scan conversion. with CRT based systems on a large projection screen, you can actually see the black gap between the scan lines of the electron beams. the original reason to upscale NTSC video to different formats (differente VGA resolutions, really) was to increase brightness, not increase detail... for the higher the resolution, the smaller the black lines in between the scan lines on the screen. the reason that this is not so easy to accomplish is because film, which was originally shot in 24 frames per second, is being asked to play back on a device that is 60, 80, or higher frames per second (the vertical refresh rate). when dealing with film, you are of course dealing with people who are very critical with all technical processes being applied (rightfully so) and the same with the viewers. when done incorrectly or without proper processing, this scan rate conversion is visible by "rips" or jittery motion artifacts during playback.
    because more and more of today's modern sources are digital (DVI and HDMI) and the display devices are also digital (LCD, DLP, and plasma) scan converters and scalers are somewhat obsolete. it is still downright confusing, though. 1080i from an HD-DVD is played back at 1080p. 1080p from a Blue Ray player is played back at 1080p. HDMI, while supposed to make life simpler, actually has a whole list of incompatible sources and display devices with more HDMI #.# versions to come.
    i retract my statement, scan converters are no longer obsolete, they are just packaged with the display devices and sources so there is no market for them. a 480p DVD player with DVI out does not really give you a 480p output direct from the 480p MPEG stream. the video DSP takes the MPEG, internally outputs 480i, then the built in converter processes it back at 480p. seeing how these DVD players are very cheap, there no longer is a market for affordable scalers. you now have the all or nothing scenario where the only vendors alive rely on high end clients that want to pay for the best and not settle with what is bundled.
    anyways, some of the companies still in the business...
    Faroudja (recently bought by Meridian UK)
    DVDO
    Silicon Image
    Focus Enhancements (exiting / exited the market?)
    Snell and Wilcox
    gefen (is a newcomer beginning to offer some product)
    i'm sure that i'm missing a bunch, but these are the ones that i recall off the top of my head

Maybe you are looking for