DVI-out does not display 1080p, only 1080i

My MacBook is not displaying 1080p through my Sharp Aquos, only 1080 (Interlaced). Because the image is so poor, I'm pretty sure that it's 1080i. No matter what settings I've tried, the colors are awful, and the image looks horribly interlaced.
Apple does not state whether or not the MacBook's GMA950 actually supports 1080p, but I'm pretty sure that it doesn't, so please be aware of this if you're planning on using it with an external HDTV with 1080p resolution.
Outputting 1920x1200 to my 24" Dell is no problem, and the image and color are fantastic once calibrated with SuperCal.
Windows XP on my Wintel's 8800GTS video card has no problems detecting and displaying 1080p, and it looks fine.

I have a similar issue. I know the Macbook outputs 1080p just fine because I had been doing this on a Westinghouse LVM-37W3 for over a year.
I just got the Magnavox 42MF437B and have tried connecting it to my Macbook but Mac OS X detects the monitor as 1920 x 1080 (interlaced). I had this issue briefly with my old Westinghouse LVM-37W3 but was able to get it to output into progressive scan by clicking on the monitor icon in the menu bar and selecting the other 1920x1080 option. This however, did not work with the Magnavox.
I have tried using the third party app SwitchResX and creating a custom 1920x1080 setting but it does not appear to change anything. I am connecting using a DVI-to-HDMI cable. Any ideas? Thanks.

Similar Messages

HELP! Ovi suite does not display Photos only thumb...

Hi, please help. Ovi Suite does not display Photos saved in my computer. Just getting Default grey image for everything on the thumbnails. OS XP home (Service ack 3). Run the repair and nothing. I uninstalled the application deleted everything to do with Nokia. Downloaded the application again and still the same problem. Nokia Ovi version 3.1.0.84. The only problem is that, Just shows grey thumbnails and no thumbnail photos. See screenshot attatched
I followed this troubleshooting steps and it still the same issue!..
Step 1
- Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Repair.
Once repair is completed then please restart computer and check.
If Step 1 didnt work, then try the below step
Step2
-Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Uninstall
Also uninstall the following f
- Nokia Connectivity Cable Driver
- PC connectivity Solution
Then right click my computer, click manage.
- Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
Then reinstall windows Installer from the link provided below
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&di...
- Then restart computer.
- Download and install Ovi Suite
- Restart Computer again
- Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
- Once done then lauch Ovi Suite.
- Check for the issue
Attachments:
Dibujo.JPG ‏83 KB

I guess sometimes this happens when the direct x is missing or corrupted in the system. Please download and install from the link provided below.
http://www.microsoft.com/downloads/en/details.aspx?familyid=2da43d38-db71-4c1b-bc6a-9b6652cd92a3
Make sure you restart the computer when the installation is complete..
Hopefully this helps
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

TV does not display 1080p with ATV 3

Just bought the ATV3. I have a 32" Westunghouse that supports 1080p with a native resolution of 1920x1080. The specs are here: http://bit.ly/PBp9eo. The ATV only displays 720p. I have a dvd player connected to the same TV and it displays in 1080i. Can someone explain to me why I can't 1080i/p via the ATV3?
Thanks

I figured it out. ThenTV has two HDMI ports, switching the ATV from HDMI-2 to HDMI-1 allows the ATV to display 1080p.

Firefox does not display frames, only lists. Help!

popular websites, e.g. youtube, are not displayed properly in so far frames are not displayed, only clickable lists of text. Please help!

It sounds like Firefox is, for some reason, not loading the CSS file for YouTube and other sites.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

SMS does not display names, only phone number

Starting a couple of days ago the SMS on my phone come in displaying only the phone number and not the name anymore.
All numbers are found in the address book.
How can this be fixed.?

This is still ongoing, t I'm on Rogers - called them but they are clueless as well.
Still hoping that someone has some idea.
All my contact phone numbers are imported from Google and are formted +1 (xxx) xxx-xxxx
not sure if that would make any differnece

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

G4 12" mini DVI to VGA external monitor does not display

I have hooked up the mini adapter cable and hooked up the VGA cable to a Dell P780, which the apple recognized. The monitor acts like it is going to come on, but then appears to go into sleep mode... The G4 is functioning as if the monitor is working.
I hooked my PC to the monitor, and it works fine.
I have tried two different monitors.
I have reset the PRAM and NVRAM...
Before I set it on fire, HELP.

Are you using the mini DVI to DVI followed by a DVI to VGA adapter? That may not work if the mini DVI to DVI adapter does not pass analog video. If that is the case, you need the mini DVI to VGA adapter:
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= 17927D0B&nplm=M9320G%2FA>

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

MENU item selection does not display drop down in ITS enabled transaction

Hello,
We are experiencing a strange behavior between two portal env.
1. DEV.
For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
2. Prod
Same scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
We are on EP 7.0
Many thanks.
Regards,
Sunil

Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

Image does not display on MacBook Pro (does on PowerBook G4!)

I created a slide in Keynote on my PowerBook G4 with an image dropped in (a pdf, I can't remember whether it was originally cut and past or dragged and dropped in). When transferring the Keynote presentation to a new macBook Pro (copying via a USB thumb drive), the presentation opens but the image does not display (everything else is OK).
The weird thing is that the image does show up in the thumbnail in Navigator View. It disappears in Light Table View, and then is gone when I return back to Navigator View. However, when I close and reopen the file, it appears again in the thumbnail.
When I click on the area where the image should be, the open squares show up around something. If I try to copy this object and past into another application (like Photoshop), I only get a blank image.
I have managed to get around this by laboriously copying the affected images on my PowerBook into separate pdf files, then transferring those files to my MacBook Pro and dropping them into place. However, I know I will find a missing image at some later date, when I no longer have access to my old PowerBook.
How to solve this problem?
P.S. Both machines are running Keynote 4.0.2 and Mac OS 10.5.2.

Thanks for taking a look!
The original image was created using Photoshop to cut out an image from a pdf file. Then it was either cut and pasted or dragged into Keynote.
Here are screenshots of what I get when I open the "droppedimage-17.pict" file (shown in the Show Package Contents window) using QuickTime on both machines. For the PowerBook:
http://www.cems.umn.edu/download/attachments/Powerbook.png
For the MacBook Pro:
http://www.cems.umn.edu/download/attachments/MacBook_Pro.png
Strangely, the Powerbook version looks like a correct grey-scale image, while the MacBook Pro looks like a B&W image.

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Macbook Pro not displaying 1080p on my monitor anymore after 10.8.4.

Hey,
My Macbook Pro 8,2 15" early 2011 unibody does not display on my BENQ g2420hd screen anymore. I am using a thunderbolt to HDMI cable and it used to work fine. I have tried my macbook pro with the same lead through a different screen and that displays in 1080p and my friends laptop through my screen and that works. When I set the screen to any other resolution it works fine, including 1080i, but on 1080p the screen acts as if It reconises it but just remains black.
I have tried resetting PRAM and SMC, I can't roll back to 10.8.3 as I am not using Time Machine (i know... i should..). I can't think of anything else I can try or do I have to wait for 10.9 or 10.8.5 for them to fix it. I know there are other post on this update issuse but mine problem seems to be slightly different.
Hope some one can help,
Adam

one more point to add...i installed windows using bootcamp, and through windows the 2560X1440 resolution works. so its not a hardware problem either

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

DVI-out does not display 1080p, only 1080i

Similar Messages

Maybe you are looking for