DVI plug too wide

So. I had a splitter DVI to VGA/DVI. I had one end into my monitor in one room(DVI) and the other(VGA) through the wall to the back of my HDTV in the other room. Problem, obviously was, if both were connected to the splitter, you could see the computer screen, but it wouldn't come up on the TV. So, went to a local reseller of used electronics, bought a DVI to dual VGA splitter(did this to make it easier for the family not having to constantly plug/unplug cords) and went to connect it. The DVI plug is too wide to fit in the plug in the back of my mini. Is there a different wider type plug than the standard DVI that I'm not aware of? I'm going to try and get back to the store and exchange it, but I'm just confused, I thought the outer diameter of the plugs were standard and it was the pins that were different. Am I missing something somewhere? Early 2006 Mac Mini

Can you post a pic of both here using the little Camera icon to upload them in a reply here?

Similar Messages

Distorted video - too wide

I have posted about this on Crackberry.com. But maybe should bring it up here.
The main problem is that when viewing a video on my Z10, images are stretched left to right and so people are wider than normal and also objects like buildings, etc also are too wide. It is less noticeable in landscape screens. Upon a suggestion I received today, I opened the same video in the Z10's Browser and the video is NOT distorted. But I think that the app should work properly.
Here's some extracts from the thread:
http://forums.crackberry.com/blackberry-z10-f254/distorted-video-too-wide-849144/
I copied a homemade mp4 file to the z10 of one of my vacation trips (I create a dvd movie from the digital photos). The image is "widened" and frankly I don't need any help in the WIDENING area. It seems to show correctly on my PB and on my computer. But on the Z10 it is wide. Pinch does not HOLD - bounces right back to wide.
There does not seem to be a setting to alter this behavior or appearance. If not connected to the tv, the DISPLAY/hdmi setting is grayed out.
I just created a new video. Since the phone was going downstairs, I copied the mp4 video to the phone. Plugged it into my tv but, once again, the images are distorted - too wide. So the screen is spread left to right and people are too wide. The effect is less noticeable on Scenery but you can see it for buildings and such. And, it is not just on my TV but it is also evident on the Z10, itself. So, the z10 appears to not be displaying the image or video WIDTH correctly.
I then copied the same video to my Playbook (another BB device) and the video is fine and NOT DISTORTED.
I am still on the original Verizon bb10.1.xxxxxxxxxxxx OS.
Any idea if there is a setting on the phone that I am missing.
**bleep**! I had not thought about opening the video in the Browser. You are RIGHT - the video proportions are correct when opened in the Browser. So this is a definite bug in the Video app's software or settings. Of course, one should not have to go into the browser to view videos because the app is BROKEN.
I wonder if Kalemsoft or other video apps performs correctly?
When I first posted the thread, I did not know if it was my desktop software's coding or resolution or .... So I burned off the video in format after format to no avail. I am somewhat surprised that no one else has raised this issue. Maybe I will take it to the official bb forum.

derf1 wrote:
Since I have installed the new update for my Z10 the pages are oversized and I am unable to get to many of the functions in different areas. How do I re-install the software?
Check Accessibility, magnify mode may be ON.

Published Folders Panel Issue in LR5.2 - Too Wide, Can't See Folder Arrows

I installed LR5.2 from the CC today on my Mac (10.8.4), and when I upgraded my LR4 catalog to LR5, all of my Published Folders were missing from underneath each corresponding Publish Services tab. None of the collections of photos are present. (Hard Drive, Facebook, Flickr, 500px)
However, each of the Published Services plug-ins are set correctly, and are shown to be up and running in the Publishing Manager. Also, when I try to create a new published folder underneath one of the tabs using the same name that I used in LR4, it says "That Name is Already In Use." So, LR5 knows that the folders exisit, they're just not there in the pane. Not only do I not see my old collections of published photos, I have no way adding new photos to those collections.
I tried deleting the LR5 preferences and starting over, opening up and upgrading my LR4 catalog in LR5 again, but still having the same problem. LR4 still runs fine and shows all of my published folders normally. They just don't show up in LR5.
It looks like it may just be an issue with the Publish Services pane. It's too wide to show the little black arrows at the right. (see photo below)
Anyone else having this problem? Any solutions?

At the risk of stating the obvious, did you try:
* Pulling the panel wider?
* Installing/enabling jf Folder Publisher (to get rid of the "(missing plug-in)" text (or delete the jf publish service altogether (disabling it in plugin manager won't do it)).
Note: if the panel won't go wide enough, you can widen it by adding lines like this to TranslatedStrings.txt in {lang} subfolder of 'Resources' - in with your Lr program files -
"$$$/locale_metric/Mac/Panel/maxWidth=900"
"$$$/locale_metric/Win/Panel/maxWidth=900"
~R.

Navigation bar too wide for template graphic after creating new page

I want to stick within the templates, but I have a lot of pages and don't want them all in the nav bar. When I flagged a page to keep it out of the NAV bar, the NAV bar get messed up - not properly displaying at the edge of the template, like it made room for the hidden page's link then re-adjusted itself too wide for the background graphic. I've got the problem in the elegant template when displayed in IE on Windows (1024X768). Safari on my mac looks OK. Are there any other setting changes I can make to be better compatible?
Thanks
Anne

It appears to have been a cache issue or some such. I no longer see the problem

Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

Open the document,
Tap the Tools icon (upper right).
Tap Document Set up.
Drag the margins to the position you wish (the actual margin width sould display as you are doing this).

Chart legend too wide when using horizontal layout

I am using a flex chart with about 15 series on it. I've set
the legend direction variable to "horizontal". However since the
panel width which contains the chart is fixed, the legend sprawls
out to the right instead of going "wrapping around" nicely to stay
within the panel. As a result, you can't read the whole legend when
looking at the chart. The chart itself stays the proper width, but
the legend is too wide and can only be seen via using the scrollbar
to move horizontally. How can that be fixed?

Solerous, you must create a custom legend. Here's an example
that uses a grid to lay out the individual grid items. If you have
a variable number of series, then you can probably come up with
better logic for laying out the legend, but this should help get
you going.
hth,
matt horn
flex docs
<?xml version="1.0"?>

<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
backgroundColor="white" creationComplete="init()">
<mx:Script><![CDATA[
import mx.containers.GridItem;
import mx.containers.GridRow;
import mx.graphics.SolidColor;
import mx.graphics.IFill;
import mx.charts.LegendItem;
import mx.charts.Legend;
import mx.collections.ArrayCollection;
[Bindable]
public var expenses:ArrayCollection = new ArrayCollection([
{Expense:"Taxes", April:2000, May:321, June:131, July:1100,
August:200, September:1400, October:42},
{Expense:"Rent", April:1000, May:95, June:313, July:600,
August:400, September:200, October:52},
{Expense:"Taxes", April:2000, May:321, June:131, July:90,
August:500, September:900, October:300},
{Expense:"Bills", April:100, May:478, June:841, July:400,
August:600, September:1100, October:150}
private function init():void {
for (var i:int = 0; i < myChart.series.length; i++) {
var li:LegendItem = new LegendItem();
li.label = myChart.series
.displayName;
var sc:SolidColor = myChart.series.getStyle("fill");
li.setStyle("fill", sc);
var gi:GridItem = new GridItem();
if (i < 3) {
// First row
gi.addChild(li);
gr1.addChild(gi);
} else if (i >= 3 && i < 6) {
// Second row
gi.addChild(li);
gr2.addChild(gi);
} else if (i >= 6) {
// Third row
gi.addChild(li);
gr3.addChild(gi);
]]></mx:Script>
<mx:Panel title="Bar Chart with Legend" width="500"
height="600">
<mx:BarChart id="myChart" dataProvider="{expenses}"
height="400" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis
dataProvider="{expenses}"
categoryField="Expense"
/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries xField="April" displayName="April (in
$USD)"/>
<mx:BarSeries
xField="May"
displayName="May (in $USD)"
/>
<mx:BarSeries
xField="June"
displayName="June (in $USD)"
/>
<mx:BarSeries
xField="July"
displayName="July (in $USD)"
/>
<mx:BarSeries
xField="August"
displayName="August (in $USD)"
/>
<mx:BarSeries
xField="September"
displayName="September (in $USD)"
/>
<mx:BarSeries
xField="October"
displayName="October (in $USD)"
/>
</mx:series>
</mx:BarChart>
<mx:Grid id="myGrid">
<mx:GridRow id="gr1">
</mx:GridRow>
<mx:GridRow id="gr2">
</mx:GridRow>
<mx:GridRow id="gr3">
</mx:GridRow>
</mx:Grid>
</mx:Panel>
</mx:Application>

PDF to TIFF error: Image is too wide to output Acrobat X Pro

I have been using Adobe Acrobat X Pro to convert PDFs to TIFFs. All of the sudden this week I am getting an error saying the Image is too wide to convert. These are files I previously converted without a problem. I am specifying resolution of 360 pixels in the TIFF settings (which is what I have always used). I installed the latest maintenance (10.1.12) but still get the error. The files are 17" wide x 11" high. Any idea why I am getting this error all of the sudden and how to fix it? I send the files to a colleague on the same Acrobat Pro X release and they do not get the errors. Reboot resolves for 1 file, then the error comes back.

The issue should be the resolution. I've had this same issue before so I'll give you a walk through of what I did. You will need to reprint your current PDF to a new PDF with a new resolution. Upon doing that, the new PDF will need to match whatever resolution is being required by whoever is needing this TIFF File, if there is not a requirement just pick one (such as 300 DPI).
1) In your existing document select Print (Ctrl+P)
2) Change your current printer to "Print to PDF/Adobe PDF/ ETC..." (whatever it is called)
3) Select Properties and a dialog box called "Adobe PDF Document Properities" should pop up.
4) Select the tab labeled Paper/Quality
5) Select "Advanced..."
6) There is an option for graphic that should have a print quality labeled " XXXX DPI" (could be anywhere from 72, 300, 600, 1200, 2400, 3600, 4800), select what you want to use, click OK back out to the basic print screen, and print your new PDF and label it whatever you want your TIFF's to be called. (I use 300 as that is what a city I submit to requires for plans).
7) Open your new PDF, and on your menu bar at the top select EDIT (right next to file) then select "Preferences" at the bottom on the drop-down menu. (or on your keyboard use "Ctrl+K" for a faster way to get to preferences)
8) From there select Convert from PDF then select TIFF from the list of options from the box in the middle> then select "Edit Settings..." under the box on the far right that has the information about how it saves TIFF Files currently.
9) There should be a "Save As TIFF Settings" Dialog box that opens up and at the bottom there is a place under "Conversion" that says resolution.
10) Change the resolution to whatever your new PDF was saved and and that should fix your problem!
I know some of this was basic stuff but I see this question come up in different places and no one has really mapped it out like above. Hope this helps!

Mac login acounts too wide for the screen

The older versions worked just fine, but Lion login account icons run left and right and are too wide for the screen on the macmini. So, I have to scroll to get to my account at the end of the list. Is there a way to change this?

It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Reports Parameter form via rwservlet in 9i Reports display is too wide

We have an app which was developed in Web Forms 6/6i which we are migrating to 9iAS Release 2/Reports 9i. We are running the .RDF reports using WEB.SHOW_DOCUMENT with rwservlet and PARAMFORM=YES. The parameter form sizes are generally 5x5, but the parameters display much wider in the 9iAS Release 2/Reports 9i environment in the Web Browser than they did in 6i. I have tried making the Parameter Form smaller, but the display still is way too wide: The browser window has to be scrolled several inches to the right to be viewed.
Any ideas on the root cause of this issue and how to fix? Or, any solutions to fix besides using RUN_REPORT_OBJECT? We don't have time or resources to write 100 parameter forms in Forms and do the call to Reports that way. Any help is appreciated. Thanks.

Hi Judith, we had the same problem and the fix was to add the following parameter to the reports.sh file in the BI&Forms Oracle home:
REPORTS_DEFAULT_PIXEL_SIZE=80;
export REPORTS_DEFAULT_PIXEL_SIZE
After that, the report server needed to be stopped and restarted for the change to take effect.

I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

Here are the Mini's specs:

Width of the Description field is too wide

Hi all
i m working on apex 4.0
in my report page
the width of the Description field is too wide when the field exceeds 150 characters
how can i control it?
plz help.
thanks,
annu.

Annu wrote:
Hi all
i m working on apex 4.0
in my report page
the width of the Description field is too wide when the field exceeds 150 characters
how can i control it?
Search the forum before posting a question.
In APEX 4.0, set the Column Width property of the text column. Column Width doesn't seem to have made it into the external documentation, but the online help says:
>
Specify the column width in pixel. The attribute is used when displaying reports in the browser. Note that setting the column width must be supported by the selected report template.
>
Therefore ensure that there is a <tt>#COLUMN_WIDTH#</tt> substitution string in your chosen report template, where the column template(s) should look something like:
<td #ALIGNMENT# headers="#COLUMN_HEADER_NAME#" class="data" #COLUMN_WIDTH#>#COLUMN_VALUE#</td>In both APEX 4.0 and previous versions you can control column width using the Column Formatting CSS Style property, which allows you to use units other than pixels:
display: block; width: 10em;Edited by: fac586 on 03-Aug-2011 09:31
By "Description field" do you mean a report column or a text item? Is this "report" really a report or is it a tabular form?

Centering div makes design view too wide

<div style="width: 100%;">
<div style="width: 100px; margin-left: auto;
margin-right: auto;">
BODY CONTENT
</div>
</div>
Ok, I've been wrapping my body content in the div tags shown
above rather
than using a centred table as I did before. The problem I
have is that
design view is too wide and I have to use the horizontal
scroll bars when I
am using my laptop. It's not a big problem, but was wondering
if it was
necessary to have to live with this? Also, is there any
particular reason
the div appears yellow in design view?
Cheers
ss.

> an HTML retard
This is the most important thing for you to work on if you
want to stick
with DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Synapse Syndrome"
<[email protected]> wrote in message
news:[email protected]...
>
> "Gary White" <[email protected]> wrote in
message
> news:[email protected]...
>> On Sat, 13 May 2006 15:45:12 +0100, "Synapse
Syndrome"
>> <[email protected]> wrote:
>>
>>><div style="width: 100%;">
>>> <div style="width: 100px; margin-left: auto;
margin-right: auto;">
>>> BODY CONTENT
>>> </div>
>>></div>
>>>
>>>
>>>
>>>Ok, I've been wrapping my body content in the div
tags shown above rather
>>>than using a centred table as I did before. The
problem I have is that
>>>design view is too wide and I have to use the
horizontal scroll bars when
>>>I
>>>am using my laptop. It's not a big problem, but
was wondering if it was
>>>necessary to have to live with this? Also, is
there any particular
>>>reason
>>>the div appears yellow in design view?
>>
>> What's the point of the outer 100% wide div? You get
exactly the same
>> thing without it. Your body content is only 100
pixels wide? There is no
>> reason for the posted code to show up in yellow.
Perhaps, if you show
>> *all* of the code, someone can spot the problem.
>
>
> Thanks, from what you say it seems obvious now. I got
that code from an
> earlier post here and was using it without knowing what
I was doing 'cos
> I'm an HTML retard.
http://tinyurl.com/rd6zq
> I changed the 100px to the max width of the real
contents and now
> everything is fine. I don't know what the point of the
outer div was for
> in the example, but it does make the design view look a
bit better for
> working out my layout I think.
> Cheers
>
> ss.
>

Monaco Font Looks Too Wide To Display on Konsole

I use Monaco as the default font of konsole. The bold format of Monaco font looks too wide to display a complete letter.
As shown in the picture, the last character of the file name disappears.
I also disselect the Draw intense colors in bold font checkbox in the konsole profile. It does not work. How could I fix that problem?
Last edited by speeds (2012-11-29 11:56:00)

yeah you can use the remote app on other ios devices and place the ios device in question as close to your eyes as you see fit

I am making a complex vector pattern for laser-cutting. No part may be more than 7mm wide at any point. How can I define this in order to get a warning when a shape is too wide? can this be automated?

I am making a complex vector pattern for laser-cutting. No part may be more than 7mm wide at any point. How can I define this in order to get a warning when a shape is too wide?
can this be automated?

Not in Illustrator. You will need a CAD program or similar where you can dial in such manufacturing criteria.
Mylenium

Display bug LR CC: adjustment panels seem too wide

All the Adjustment tools (crop-gradient filters, etc)have their panel too wide. This cuts off the numbers on the left. See screen shot. OSX 10.10.2.

Other info: it only happens in FRENCH with a long slider name: On the image above, note the "Defringe"; in French it is way longer "Supprimer la frange". I changed the language to verify, and it is the case.

DVI plug too wide

Similar Messages

Maybe you are looking for